- RLCD device.properties: DefaultDark (focus UI visible), fontSize 18
(+28% vs 14: small 10->14, default 14->18, large 18->24, icons 16->20/36->48)
- ST7305 driver: honor invertColor config (was ignored), call
esp_lcd_panel_invert_color after init
- DisplayDevice: add supportsInvertColor + set/get, and
supportsMonochromeThreshold/set/get (ST7305 only)
- EspLcdDisplay: implement invert via panelHandle, and mono threshold via
global g_mono_threshold shared with esp_lvgl_port
- DisplaySettings: new fields invertColor (default true to preserve current
inverted look) and monochromeThreshold (default 60 best for DefaultDark per
user testing, range 20-230)
- Lvgl.cpp: apply invert + threshold at boot from settings
- Display app: add Invert colors switch (if supportsInvertColor) + Mono
threshold slider with live preview and persistence
- esp_lvgl_port_disp.c (components override for hash mismatch): fix B/W
conversion
BEFORE: blue >16 only -> crushed colors, no gray handling
AFTER: proper luminance Y=0.299R+0.587G+0.114B with adjustable threshold
(default 60), no Bayer dithering dots. Crisp text on reflective
- Launcher/button/list wrappers reverted to stock DefaultDark (no white
focus hacks) per user request - focus UI now uses default outline which
survives luminance threshold
Verified on waveshare-esp32-s3-rlcd /dev/cu.usbmodem1101:
- Build 2877200 bytes, flash hash verified
- Invert toggle works, threshold slider live (60 best per test)
- Font bump visible, focus UI visible for button navigation
- No dithering dots
Docs: LVGL mono https://docs.lvgl.io/9.2/porting/display.html#monochrome-displays
Themes: https://docs.lvgl.io/9.2/details/common-widget-features/styles/themes.html
Co-authored-by: Hermes Agent <hermes@noreply>
- Fix DTS I2S pinmap to RLCD correct pins (mclk 16, bclk 9, ws 45, tx 8, rx 10) resolving GPIO5 conflict with display DC
- Port ES8311 DAC and ES7210 mic ADC init from working MicroPython audio_util.py
- Fix I2S DMA OOM by reducing to 6x160 and RX fallback to TX-only
- Fix MCLK multiple for 12.288MHz family (16k->768 exact) to avoid robot sound
- Avoid ES8311 reclock glitch for 16k rate to eliminate pop
- Clean log spam (file lock once, listDir DEBUG, I2S DEBUG) that caused UART jitter
- VoiceRecorder: request stereo from ES7210 and downmix left channel to fix mic-like low pitch
- DTS: migrate i2c0 from legacy esp32-i2c to esp32-i2c-master to avoid IDF CONFLICT warning (driver_ng vs old driver) which could stall boot
- Configuration.cpp: add 100ms power stabilize after GPIO46 amp on, probe ES8311 at 0x18 with has_device_at_address before full init (non-fatal), prevents bus lock if codec missing
- ST7305Display.cpp: add 150ms after reset + 50ms after init, prevents freeze on fast boot where SPI transaction too early (observed stuck on weird state)
Build 0x2b79c0 -> 0x2b79c0 with I2C master, ES8311 now initializes, display stable
Co-Authored-By: internal-model
- McpSettings was hardcoded to /data/service/mcp/settings.properties,
but ES3C28P uses storage.userDataLocation=SD so user data lives on
/sdcard/tactility/. Settings appeared to save but on reload returned
default false -> "enable and when I go back shows disabled".
Fixed to use getUserDataPath()+"/settings/mcp.properties" pattern
consistent with DisplaySettings/WebServerSettings, with
findOrCreateParentDirectory() and isFile() guard.
- HttpServer ctrl_port collision: ESP-IDF default 32768 used by both
WebServer (80) and DevelopmentService (6666). Second httpd_start()
failed silently -> dashboard up but /api/mcp 404 and :6666 refused.
Fixed with unique ctrl_port = 32768 + (port % 1000).
Added CONFIG_HTTPD_MAX_URI_HANDLERS=20 (default 8 < 9 needed for
7 handlers + 2 internal).
- DevService stack 5120 -> 8192 for /app/install handling.
- McpSystem video stream task stack 4096 -> 8192 and idle yield 50ms
(was 5ms always) to avoid CPU starvation blocking httpd tasks.
On RLCD, timer must always run: DisplayIdle early return on
!supportsBacklightDuty() broke MCP manual activation (cachedSettings
not loaded, backlight duty 0). Fixed to always load settings +
start timer, log RLCD detection, guard setBacklightDuty with
supportsBacklightDuty() and fallback duty 255.
- DisplaySettings: add disableScreensaverWhenCharging bool, persisted,
with UI toggle in Display app (Settings->Display) using
PowerDevice::IsCharging check via findDevices callback.
When charging and flag enabled, screensaver activation skipped,
and if already dimmed, wake on charging.
- ES3C28P Power driver: GPIO9 ADC1_CH8 2x divider 2500-4200mV spec from
~/Downloads official docs, TP4054 CHRG not connected to GPIO, so
IsCharging inferred via voltage thresholds (<500mV no battery USB
or >5000mV wall powered, >=4150mV high) + rising trend.
Verified: flashed es3c28p to /dev/cu.usbmodem101 (192.168.68.113),
WiFi FamReynaMesh RSSI -59, dashboard 200, :6666/info now works,
/api/mcp returns disabled correctly until enabled, persists to SD.
- Fixed crash when returning to Setup app (from any of the steps)
- Fixed crash when returning to TimeDateSettings app (after locale selection)
- Fixed GuiService inconsistent behaviour: now always perform operations async (e.g. to show/hide apps). This fixes crashes in some onHide() calls where onHide() might be called before onShow() was called.
- Fix for incorrect WebServService path
- Remove CYD-4848S040C SD card functionality, but added a GPIO fix for releasing 3-wire SPI pin sharing.
- Fix for saving/loading settings for various apps
- Disable BlueTooth driver by default, to ensure it doesn't allocate memory
- Update BlueTooth settings app behaviour to make sure it starts/stops the devices
- Disable SPI RAM usage for ST7789 as it broke App Hub
- Reduce T-Display and T-Deck display buffers from 1/3rd to 1/10th of resolution
- Enabled dynamic buffers for MbedTLS to optimize memory
- TLS 1.3 did not work with dynamic buffers: downgrade to 1.2 for now
- WiFi is now enabled from the Boot app callback to the WiFi service, instead of the WiFi service start() function. This avoids a lockup when WiFi is started by the service while the Boot app is updating the WiFi settings.
- New drivers:
- SD SPI
- spi_peripheral
- touch_placeholder
- display_placeholder
- Devicetree compiler:
- Implement phandle-arrays
- Implement device addresses
- Add placeholder drivers to all devices with a SPI display
- SPI driver: add `cs-pins` and set them to high on driver start
- FileSystem: add `file_system_set_owner()` and `file_system_get_owner()`
- File locking is now checking if the related `FileSystem` is part of a shared SPI bus
- Add `device_get_child_count()`
- SDMMC driver: Remove default of `slot` value
- Fix for Crowpanel Basic 3.5" display (add delay to booting)
- Fix for LilyGO T-HMI SD card mounting (delayed mounting by disabling it initially in the dts)
The FT6 driver does a hardware ID check, which fails on the CoreS3 but
not on Stackchan for some reason. FT5 works on Stackchan, so we'll use
that for all devices, just like M5GFX does.
* Bluetooth LE addition
* fixes
* use the psram!
helps a little on S3 (t-deck)
* custom device name
* Update symbols.c
* Feedback + fixes
Fixes external app start/stop server (child devices)
Fixes BtManage causing a full system hang upon disabling bt when a device is connected to the host.
* updoot
* more updoot
* move back!
* Revert "move back!"
This reverts commit d3694365c634acc5db62ac59771c496cb971a727.
* fix some of the things
* Addressing feedback? hmm
* Fixes
Bug 1 — Reconnect loop / Reconnect not working fixed
Bug 2 — Name-only advertising overwrites HID advertising
Bug 3 — BleHidDeviceCtx leak on re-enable
Enhancement — HID device auto-start on radio re-enable
* stuff...
* update for consistency with others
* fix crashes
and some bonus symbols
* a few symbols, i2c speed, cdn message
100kHz i2c speed seems to be more compatible with m5stack modules...and probably in general.
cdn message no longer applies
* Hide BT Settings when bt not enabled
* Addressing things and device fixes
* Missed one!
* stuff
* Optional internal pull-ups for SD/MMC pins in DTS
* Selectable on‑chip LDO channel for SD/MMC power (can be disabled)
* Added several sensor/driver modules to generic ESP32 device configurations so that they become part of the SDKs
* SD card mount now prints card information for clearer diagnostics
* Fix for bug DTS boolean parsing. Improved tests to catch these issues.
* Expanded SDK integration test to include new modules and headers
* Modularized packaging to generate per‑module build files and include driver assets
Font size set to 18 for 800x480 displays
Fix web server dashboard not rendering when sdcard isn't present
Added new driver modules
- BM8563 RTC
- RX8130CE RTC
- MPU6886 IMU
- QMI8658 IMU
- M5PM1 Power Management Chip
Applied the above modules to applicable devicetrees.
Added new device: M5Stack StickS3
Added new M5Stack Tab5 St7123 variant.
ButtonControl changed to use interupts and xQueue, added AppClose action.
And some bonus symbols of course, the apps are hungry for symbols.
- UiDensity moved to lvgl-module
- Deleted tt_hal and tt_hal_gpio (breaks apps, but will fix those right after merging)
- Added I2C 8 bit register operations
- Added device.properties to simulator
- Improved Tab5 hardware init, implement audio
- Add README.md to kernel
**New Features**
* Runtime font accessors and new symbol fonts for text, launcher, statusbar, and shared icons.
* Added font height base setting to device.properties
* Text fonts now have 3 sizes: small, default, large
**Improvements**
* Renamed `UiScale` to `UiDensity`
* Statusbar, toolbar and many UI components now compute heights and spacing from fonts/density.
* SSD1306 initialization sequence refined for more stable startup.
* Multiple image assets replaced by symbol-font rendering.
* Many layout improvements related to density, font scaling and icon scaling
* Updated folder name capitalization for newer style
Adolfo Reyna