211 lines
8.0 KiB
C++
211 lines
8.0 KiB
C++
// SPDX-License-Identifier: Apache-2.0
|
|
#include <drivers/st7123_touch.h>
|
|
#include <st7123_module.h>
|
|
|
|
#include <tactility/check.h>
|
|
#include <tactility/device.h>
|
|
#include <tactility/driver.h>
|
|
#include <tactility/drivers/esp32_i2c.h>
|
|
#include <tactility/drivers/esp32_i2c_master.h>
|
|
#include <tactility/drivers/i2c_controller.h>
|
|
#include <tactility/drivers/pointer.h>
|
|
#include <tactility/log.h>
|
|
|
|
#include <esp_err.h>
|
|
#include <esp_lcd_io_i2c.h>
|
|
#include <esp_lcd_panel_io.h>
|
|
#include <esp_lcd_touch.h>
|
|
#include <esp_lcd_touch_st7123.h>
|
|
|
|
#include <cstdlib>
|
|
|
|
#define TAG "St7123Touch"
|
|
#define GET_CONFIG(device) (static_cast<const St7123TouchConfig*>((device)->config))
|
|
|
|
struct St7123TouchInternal {
|
|
esp_lcd_panel_io_handle_t io_handle;
|
|
esp_lcd_touch_handle_t touch_handle;
|
|
};
|
|
|
|
static gpio_num_t pin_or_nc(const GpioPinSpec& pin) {
|
|
return pin.gpio_controller == nullptr ? GPIO_NUM_NC : static_cast<gpio_num_t>(pin.pin);
|
|
}
|
|
|
|
// region Driver lifecycle
|
|
|
|
// Unlike GT911, ST7123's I2C address is fixed (see ESP_LCD_TOUCH_IO_I2C_ST7123_ADDRESS) - no
|
|
// probing needed, the devicetree "reg" hint is purely documentation here.
|
|
static esp_err_t create_io_handle(Device* parent, esp_lcd_panel_io_handle_t* out_handle) {
|
|
esp_lcd_panel_io_i2c_config_t io_config = ESP_LCD_TOUCH_IO_I2C_ST7123_CONFIG();
|
|
|
|
auto* parent_driver = device_get_driver(parent);
|
|
if (driver_is_compatible(parent_driver, "espressif,esp32-i2c")) {
|
|
auto port = static_cast<const Esp32I2cConfig*>(parent->config)->port;
|
|
return esp_lcd_new_panel_io_i2c_v1(port, &io_config, out_handle);
|
|
}
|
|
if (driver_is_compatible(parent_driver, "espressif,esp32-i2c-master")) {
|
|
auto bus = esp32_i2c_master_get_bus_handle(parent);
|
|
io_config.scl_speed_hz = esp32_i2c_master_get_clock_frequency(parent);
|
|
return esp_lcd_new_panel_io_i2c_v2(bus, &io_config, out_handle);
|
|
}
|
|
|
|
LOG_E(TAG, "Unsupported I2C driver");
|
|
return ESP_ERR_NOT_SUPPORTED;
|
|
}
|
|
|
|
static error_t start(Device* device) {
|
|
auto* parent = device_get_parent(device);
|
|
check(device_get_type(parent) == &I2C_CONTROLLER_TYPE);
|
|
|
|
const auto* config = GET_CONFIG(device);
|
|
|
|
auto* internal = static_cast<St7123TouchInternal*>(malloc(sizeof(St7123TouchInternal)));
|
|
if (internal == nullptr) {
|
|
return ERROR_OUT_OF_MEMORY;
|
|
}
|
|
|
|
esp_err_t ret = create_io_handle(parent, &internal->io_handle);
|
|
if (ret != ESP_OK) {
|
|
free(internal);
|
|
return ERROR_RESOURCE;
|
|
}
|
|
|
|
esp_lcd_touch_config_t touch_config = {
|
|
.x_max = config->x_max,
|
|
.y_max = config->y_max,
|
|
.rst_gpio_num = pin_or_nc(config->pin_reset),
|
|
.int_gpio_num = pin_or_nc(config->pin_interrupt),
|
|
.levels = {
|
|
.reset = config->reset_active_high ? 1u : 0u,
|
|
.interrupt = config->interrupt_active_high ? 1u : 0u,
|
|
},
|
|
.flags = {
|
|
.swap_xy = config->swap_xy ? 1u : 0u,
|
|
.mirror_x = config->mirror_x ? 1u : 0u,
|
|
.mirror_y = config->mirror_y ? 1u : 0u,
|
|
},
|
|
.process_coordinates = nullptr,
|
|
.interrupt_callback = nullptr,
|
|
.user_data = nullptr,
|
|
.driver_data = nullptr,
|
|
};
|
|
|
|
ret = esp_lcd_touch_new_i2c_st7123(internal->io_handle, &touch_config, &internal->touch_handle);
|
|
if (ret != ESP_OK) {
|
|
LOG_E(TAG, "Failed to create touch handle: %s", esp_err_to_name(ret));
|
|
esp_lcd_panel_io_del(internal->io_handle);
|
|
free(internal);
|
|
return ERROR_RESOURCE;
|
|
}
|
|
|
|
device_set_driver_data(device, internal);
|
|
return ERROR_NONE;
|
|
}
|
|
|
|
static error_t stop(Device* device) {
|
|
auto* internal = static_cast<St7123TouchInternal*>(device_get_driver_data(device));
|
|
|
|
// esp_lcd_touch_del() only releases the touch-side resources; the panel IO handle is owned
|
|
// separately and needs its own deletion.
|
|
if (internal->touch_handle != nullptr) {
|
|
if (esp_lcd_touch_del(internal->touch_handle) != ESP_OK) {
|
|
LOG_E(TAG, "Failed to delete touch handle");
|
|
return ERROR_RESOURCE;
|
|
}
|
|
internal->touch_handle = nullptr;
|
|
}
|
|
|
|
if (internal->io_handle != nullptr) {
|
|
if (esp_lcd_panel_io_del(internal->io_handle) != ESP_OK) {
|
|
LOG_E(TAG, "Failed to delete panel IO handle");
|
|
return ERROR_RESOURCE;
|
|
}
|
|
internal->io_handle = nullptr;
|
|
}
|
|
|
|
free(internal);
|
|
device_set_driver_data(device, nullptr);
|
|
return ERROR_NONE;
|
|
}
|
|
|
|
// endregion
|
|
|
|
// region PointerApi
|
|
|
|
static error_t st7123_touch_enter_sleep(Device* device) {
|
|
auto* internal = static_cast<St7123TouchInternal*>(device_get_driver_data(device));
|
|
return esp_lcd_touch_enter_sleep(internal->touch_handle) == ESP_OK ? ERROR_NONE : ERROR_RESOURCE;
|
|
}
|
|
|
|
static error_t st7123_touch_exit_sleep(Device* device) {
|
|
auto* internal = static_cast<St7123TouchInternal*>(device_get_driver_data(device));
|
|
return esp_lcd_touch_exit_sleep(internal->touch_handle) == ESP_OK ? ERROR_NONE : ERROR_RESOURCE;
|
|
}
|
|
|
|
static error_t st7123_touch_read_data(Device* device, TickType_t timeout) {
|
|
(void)timeout; // esp_lcd_touch_read_data() has no timeout parameter
|
|
auto* internal = static_cast<St7123TouchInternal*>(device_get_driver_data(device));
|
|
return esp_lcd_touch_read_data(internal->touch_handle) == ESP_OK ? ERROR_NONE : ERROR_RESOURCE;
|
|
}
|
|
|
|
static bool st7123_touch_get_touched_points(Device* device, uint16_t* x, uint16_t* y, uint16_t* strength, uint8_t* point_count, uint8_t max_point_count) {
|
|
auto* internal = static_cast<St7123TouchInternal*>(device_get_driver_data(device));
|
|
return esp_lcd_touch_get_coordinates(internal->touch_handle, x, y, strength, point_count, max_point_count);
|
|
}
|
|
|
|
static error_t st7123_touch_set_swap_xy(Device* device, bool swap) {
|
|
auto* internal = static_cast<St7123TouchInternal*>(device_get_driver_data(device));
|
|
return esp_lcd_touch_set_swap_xy(internal->touch_handle, swap) == ESP_OK ? ERROR_NONE : ERROR_RESOURCE;
|
|
}
|
|
|
|
static error_t st7123_touch_get_swap_xy(Device* device, bool* swap) {
|
|
auto* internal = static_cast<St7123TouchInternal*>(device_get_driver_data(device));
|
|
return esp_lcd_touch_get_swap_xy(internal->touch_handle, swap) == ESP_OK ? ERROR_NONE : ERROR_RESOURCE;
|
|
}
|
|
|
|
static error_t st7123_touch_set_mirror_x(Device* device, bool mirror) {
|
|
auto* internal = static_cast<St7123TouchInternal*>(device_get_driver_data(device));
|
|
return esp_lcd_touch_set_mirror_x(internal->touch_handle, mirror) == ESP_OK ? ERROR_NONE : ERROR_RESOURCE;
|
|
}
|
|
|
|
static error_t st7123_touch_get_mirror_x(Device* device, bool* mirror) {
|
|
auto* internal = static_cast<St7123TouchInternal*>(device_get_driver_data(device));
|
|
return esp_lcd_touch_get_mirror_x(internal->touch_handle, mirror) == ESP_OK ? ERROR_NONE : ERROR_RESOURCE;
|
|
}
|
|
|
|
static error_t st7123_touch_set_mirror_y(Device* device, bool mirror) {
|
|
auto* internal = static_cast<St7123TouchInternal*>(device_get_driver_data(device));
|
|
return esp_lcd_touch_set_mirror_y(internal->touch_handle, mirror) == ESP_OK ? ERROR_NONE : ERROR_RESOURCE;
|
|
}
|
|
|
|
static error_t st7123_touch_get_mirror_y(Device* device, bool* mirror) {
|
|
auto* internal = static_cast<St7123TouchInternal*>(device_get_driver_data(device));
|
|
return esp_lcd_touch_get_mirror_y(internal->touch_handle, mirror) == ESP_OK ? ERROR_NONE : ERROR_RESOURCE;
|
|
}
|
|
|
|
// endregion
|
|
|
|
static const PointerApi st7123_touch_pointer_api = {
|
|
.enter_sleep = st7123_touch_enter_sleep,
|
|
.exit_sleep = st7123_touch_exit_sleep,
|
|
.read_data = st7123_touch_read_data,
|
|
.get_touched_points = st7123_touch_get_touched_points,
|
|
.set_swap_xy = st7123_touch_set_swap_xy,
|
|
.get_swap_xy = st7123_touch_get_swap_xy,
|
|
.set_mirror_x = st7123_touch_set_mirror_x,
|
|
.get_mirror_x = st7123_touch_get_mirror_x,
|
|
.set_mirror_y = st7123_touch_set_mirror_y,
|
|
.get_mirror_y = st7123_touch_get_mirror_y,
|
|
};
|
|
|
|
Driver st7123_touch_driver = {
|
|
.name = "st7123-touch",
|
|
.compatible = (const char*[]) { "sitronix,st7123-touch", nullptr },
|
|
.start_device = start,
|
|
.stop_device = stop,
|
|
.api = &st7123_touch_pointer_api,
|
|
.device_type = &POINTER_TYPE,
|
|
.owner = &st7123_module,
|
|
.internal = nullptr
|
|
};
|