- Fixed crash when returning to Setup app (from any of the steps)
- Fixed crash when returning to TimeDateSettings app (after locale selection)
- Fixed GuiService inconsistent behaviour: now always perform operations async (e.g. to show/hide apps). This fixes crashes in some onHide() calls where onHide() might be called before onShow() was called.
- Fix for incorrect WebServService path
- Remove CYD-4848S040C SD card functionality, but added a GPIO fix for releasing 3-wire SPI pin sharing.
- Fix for saving/loading settings for various apps
- Implement Setup app for device's first boot
- Implement device simple name and vendor name variables
- Remove region setting (locale setting is already available)
- Disable BlueTooth driver by default, to ensure it doesn't allocate memory
- Update BlueTooth settings app behaviour to make sure it starts/stops the devices
- Disable SPI RAM usage for ST7789 as it broke App Hub
- Reduce T-Display and T-Deck display buffers from 1/3rd to 1/10th of resolution
- Enabled dynamic buffers for MbedTLS to optimize memory
- TLS 1.3 did not work with dynamic buffers: downgrade to 1.2 for now
- WiFi is now enabled from the Boot app callback to the WiFi service, instead of the WiFi service start() function. This avoids a lockup when WiFi is started by the service while the Boot app is updating the WiFi settings.
- New drivers:
- SD SPI
- spi_peripheral
- touch_placeholder
- display_placeholder
- Devicetree compiler:
- Implement phandle-arrays
- Implement device addresses
- Add placeholder drivers to all devices with a SPI display
- SPI driver: add `cs-pins` and set them to high on driver start
- FileSystem: add `file_system_set_owner()` and `file_system_get_owner()`
- File locking is now checking if the related `FileSystem` is part of a shared SPI bus
- Add `device_get_child_count()`
- SDMMC driver: Remove default of `slot` value
- Fix for Crowpanel Basic 3.5" display (add delay to booting)
- Fix for LilyGO T-HMI SD card mounting (delayed mounting by disabling it initially in the dts)
- Add ScreensaverType::McpScreen to DisplaySettings enum, toString/fromString
- Add 'MCP Screen' option to the Display settings screensaver dropdown
- New McpScreensaver (Screensaver subclass): creates full-screen lv_canvas on
the overlay, allocates framebuffer in SPIRAM, registers canvas pointer in
McpSystemState, shows 'Waiting for LLM...' until first draw command arrives
- Wire McpScreensaver into DisplayIdle::activateScreensaver() switch
- McpSystem::ensureOverrideScreen() now calls displayidle::findService()->
startScreensaver() instead of launching McpOverrideApp — canvas appears
automatically on any LLM draw command
- Remove McpOverrideApp (replaced by screensaver), deregister from Tactility.cpp
- Remove mcpOverrideEnabled from McpSettings — no longer needed
- Simplify McpSettingsApp: remove Screen Override toggle, update info text to
direct users to Settings -> Display -> Screensaver -> MCP Screen
- Add McpSettings (load/save mcpEnabled, mcpOverrideEnabled to /data/service/mcp/settings.properties)
- Add McpSystem: global state, canvas drawing (RGB565, BMP, PBM, text), I2S audio (WAV, MP3 via minimp3, tone, record)
- Add McpHandler: unauthenticated POST /api/mcp (JSON-RPC 2.0, 13 tools) and POST /api/screen/raw endpoints
- Route MCP endpoints before Basic Auth check in WebServerService::handleApiPost
- Start HTTP server at boot if either webServerEnabled OR mcpEnabled is set
- Fix setEnabled: start unconditionally when called with true; only stop if both WS and MCP are disabled
- Add McpSettingsApp (Settings category): toggle MCP service + screen override, show live endpoint URL
- Add McpOverrideApp (appId one.tactility.mcpscreen): full-screen LVGL canvas for LLM-driven display override
- Register both new apps in Tactility.cpp
The FT6 driver does a hardware ID check, which fails on the CoreS3 but
not on Stackchan for some reason. FT5 works on Stackchan, so we'll use
that for all devices, just like M5GFX does.
* Bluetooth LE addition
* fixes
* use the psram!
helps a little on S3 (t-deck)
* custom device name
* Update symbols.c
* Feedback + fixes
Fixes external app start/stop server (child devices)
Fixes BtManage causing a full system hang upon disabling bt when a device is connected to the host.
* updoot
* more updoot
* move back!
* Revert "move back!"
This reverts commit d3694365c634acc5db62ac59771c496cb971a727.
* fix some of the things
* Addressing feedback? hmm
* Fixes
Bug 1 — Reconnect loop / Reconnect not working fixed
Bug 2 — Name-only advertising overwrites HID advertising
Bug 3 — BleHidDeviceCtx leak on re-enable
Enhancement — HID device auto-start on radio re-enable
* stuff...
* update for consistency with others
* fix crashes
and some bonus symbols
* a few symbols, i2c speed, cdn message
100kHz i2c speed seems to be more compatible with m5stack modules...and probably in general.
cdn message no longer applies
* Hide BT Settings when bt not enabled
* Addressing things and device fixes
* Missed one!
* stuff
* Optional internal pull-ups for SD/MMC pins in DTS
* Selectable on‑chip LDO channel for SD/MMC power (can be disabled)
* Added several sensor/driver modules to generic ESP32 device configurations so that they become part of the SDKs
* SD card mount now prints card information for clearer diagnostics
* Fix for bug DTS boolean parsing. Improved tests to catch these issues.
* Expanded SDK integration test to include new modules and headers
* Modularized packaging to generate per‑module build files and include driver assets
Font size set to 18 for 800x480 displays
Fix web server dashboard not rendering when sdcard isn't present
Added new driver modules
- BM8563 RTC
- RX8130CE RTC
- MPU6886 IMU
- QMI8658 IMU
- M5PM1 Power Management Chip
Applied the above modules to applicable devicetrees.
Added new device: M5Stack StickS3
Added new M5Stack Tab5 St7123 variant.
ButtonControl changed to use interupts and xQueue, added AppClose action.
And some bonus symbols of course, the apps are hungry for symbols.
- UiDensity moved to lvgl-module
- Deleted tt_hal and tt_hal_gpio (breaks apps, but will fix those right after merging)
- Added I2C 8 bit register operations
- Added device.properties to simulator
- Improved Tab5 hardware init, implement audio
- Add README.md to kernel
Adolfo Reyna