- Fixed crash when returning to Setup app (from any of the steps)
- Fixed crash when returning to TimeDateSettings app (after locale selection)
- Fixed GuiService inconsistent behaviour: now always perform operations async (e.g. to show/hide apps). This fixes crashes in some onHide() calls where onHide() might be called before onShow() was called.
- Fix for incorrect WebServService path
- Remove CYD-4848S040C SD card functionality, but added a GPIO fix for releasing 3-wire SPI pin sharing.
- Fix for saving/loading settings for various apps
- Implement Setup app for device's first boot
- Implement device simple name and vendor name variables
- Remove region setting (locale setting is already available)
- Disable BlueTooth driver by default, to ensure it doesn't allocate memory
- Update BlueTooth settings app behaviour to make sure it starts/stops the devices
- Disable SPI RAM usage for ST7789 as it broke App Hub
- Reduce T-Display and T-Deck display buffers from 1/3rd to 1/10th of resolution
- Enabled dynamic buffers for MbedTLS to optimize memory
- TLS 1.3 did not work with dynamic buffers: downgrade to 1.2 for now
- WiFi is now enabled from the Boot app callback to the WiFi service, instead of the WiFi service start() function. This avoids a lockup when WiFi is started by the service while the Boot app is updating the WiFi settings.
- New drivers:
- SD SPI
- spi_peripheral
- touch_placeholder
- display_placeholder
- Devicetree compiler:
- Implement phandle-arrays
- Implement device addresses
- Add placeholder drivers to all devices with a SPI display
- SPI driver: add `cs-pins` and set them to high on driver start
- FileSystem: add `file_system_set_owner()` and `file_system_get_owner()`
- File locking is now checking if the related `FileSystem` is part of a shared SPI bus
- Add `device_get_child_count()`
- SDMMC driver: Remove default of `slot` value
- Fix for Crowpanel Basic 3.5" display (add delay to booting)
- Fix for LilyGO T-HMI SD card mounting (delayed mounting by disabling it initially in the dts)
- Add ScreensaverType::McpScreen to DisplaySettings enum, toString/fromString
- Add 'MCP Screen' option to the Display settings screensaver dropdown
- New McpScreensaver (Screensaver subclass): creates full-screen lv_canvas on
the overlay, allocates framebuffer in SPIRAM, registers canvas pointer in
McpSystemState, shows 'Waiting for LLM...' until first draw command arrives
- Wire McpScreensaver into DisplayIdle::activateScreensaver() switch
- McpSystem::ensureOverrideScreen() now calls displayidle::findService()->
startScreensaver() instead of launching McpOverrideApp — canvas appears
automatically on any LLM draw command
- Remove McpOverrideApp (replaced by screensaver), deregister from Tactility.cpp
- Remove mcpOverrideEnabled from McpSettings — no longer needed
- Simplify McpSettingsApp: remove Screen Override toggle, update info text to
direct users to Settings -> Display -> Screensaver -> MCP Screen
- Add McpSettings (load/save mcpEnabled, mcpOverrideEnabled to /data/service/mcp/settings.properties)
- Add McpSystem: global state, canvas drawing (RGB565, BMP, PBM, text), I2S audio (WAV, MP3 via minimp3, tone, record)
- Add McpHandler: unauthenticated POST /api/mcp (JSON-RPC 2.0, 13 tools) and POST /api/screen/raw endpoints
- Route MCP endpoints before Basic Auth check in WebServerService::handleApiPost
- Start HTTP server at boot if either webServerEnabled OR mcpEnabled is set
- Fix setEnabled: start unconditionally when called with true; only stop if both WS and MCP are disabled
- Add McpSettingsApp (Settings category): toggle MCP service + screen override, show live endpoint URL
- Add McpOverrideApp (appId one.tactility.mcpscreen): full-screen LVGL canvas for LLM-driven display override
- Register both new apps in Tactility.cpp
The FT6 driver does a hardware ID check, which fails on the CoreS3 but
not on Stackchan for some reason. FT5 works on Stackchan, so we'll use
that for all devices, just like M5GFX does.
* Bluetooth LE addition
* fixes
* use the psram!
helps a little on S3 (t-deck)
* custom device name
* Update symbols.c
* Feedback + fixes
Fixes external app start/stop server (child devices)
Fixes BtManage causing a full system hang upon disabling bt when a device is connected to the host.
* updoot
* more updoot
* move back!
* Revert "move back!"
This reverts commit d3694365c634acc5db62ac59771c496cb971a727.
* fix some of the things
* Addressing feedback? hmm
* Fixes
Bug 1 — Reconnect loop / Reconnect not working fixed
Bug 2 — Name-only advertising overwrites HID advertising
Bug 3 — BleHidDeviceCtx leak on re-enable
Enhancement — HID device auto-start on radio re-enable
* stuff...
* update for consistency with others
* fix crashes
and some bonus symbols
* a few symbols, i2c speed, cdn message
100kHz i2c speed seems to be more compatible with m5stack modules...and probably in general.
cdn message no longer applies
* Hide BT Settings when bt not enabled
* Addressing things and device fixes
* Missed one!
* stuff
* Optional internal pull-ups for SD/MMC pins in DTS
* Selectable on‑chip LDO channel for SD/MMC power (can be disabled)
* Added several sensor/driver modules to generic ESP32 device configurations so that they become part of the SDKs
* SD card mount now prints card information for clearer diagnostics
* Fix for bug DTS boolean parsing. Improved tests to catch these issues.
* Expanded SDK integration test to include new modules and headers
* Modularized packaging to generate per‑module build files and include driver assets
Adolfo Reyna