86 lines
2.2 KiB
CMake
86 lines
2.2 KiB
CMake
# Generated Cmake Pico project file
|
|
|
|
cmake_minimum_required(VERSION 3.13)
|
|
|
|
set(CMAKE_C_STANDARD 11)
|
|
set(CMAKE_CXX_STANDARD 17)
|
|
set(CMAKE_EXPORT_COMPILE_COMMANDS ON)
|
|
|
|
# Initialise pico_sdk from installed location
|
|
# (note this can come from environment, CMake cache etc)
|
|
|
|
# == DO NOT EDIT THE FOLLOWING LINES for the Raspberry Pi Pico VS Code Extension to work ==
|
|
if(WIN32)
|
|
set(USERHOME $ENV{USERPROFILE})
|
|
else()
|
|
set(USERHOME $ENV{HOME})
|
|
endif()
|
|
set(sdkVersion 2.2.0)
|
|
set(toolchainVersion 14_2_Rel1)
|
|
set(picotoolVersion 2.2.0-a4)
|
|
set(picoVscode ${USERHOME}/.pico-sdk/cmake/pico-vscode.cmake)
|
|
if (EXISTS ${picoVscode})
|
|
include(${picoVscode})
|
|
endif()
|
|
# ====================================================================================
|
|
set(PICO_BOARD adafruit_feather_rp2350 CACHE STRING "Board type")
|
|
|
|
# Pull in Raspberry Pi Pico SDK (must be before project)
|
|
include(pico_sdk_import.cmake)
|
|
|
|
project(basic1 C CXX ASM)
|
|
|
|
# Initialise the Raspberry Pi Pico SDK
|
|
pico_sdk_init()
|
|
|
|
# Add executable. Default name is the project name, version 0.1
|
|
|
|
add_executable(basic1
|
|
basic1.cpp
|
|
st7796.c
|
|
ft6336u.c
|
|
sd_card.c
|
|
low_level_render.cpp
|
|
low_level_gui.cpp
|
|
diskio_sdcard.c
|
|
fatfs_time.c
|
|
fatfs/source/ff.c
|
|
fatfs/source/ffsystem.c
|
|
fatfs/source/ffunicode.c
|
|
)
|
|
|
|
pico_set_program_name(basic1 "basic1")
|
|
pico_set_program_version(basic1 "0.1")
|
|
|
|
# Modify the below lines to enable/disable output over UART/USB
|
|
pico_enable_stdio_uart(basic1 0)
|
|
pico_enable_stdio_usb(basic1 1)
|
|
|
|
# Add the standard library to the build
|
|
target_link_libraries(basic1
|
|
pico_stdlib)
|
|
|
|
# Add the standard include files to the build
|
|
target_include_directories(basic1 PRIVATE
|
|
${CMAKE_CURRENT_LIST_DIR}
|
|
${CMAKE_CURRENT_LIST_DIR}/fatfs/source
|
|
)
|
|
|
|
# Add any user requested libraries
|
|
target_link_libraries(basic1
|
|
hardware_spi
|
|
hardware_i2c
|
|
m
|
|
)
|
|
|
|
pico_add_extra_outputs(basic1)
|
|
|
|
# RP2350-specific: Set the boot stage2 and ensure proper image definition
|
|
# This is critical for reliable cold boot on RP2350
|
|
pico_set_binary_type(basic1 default)
|
|
|
|
# Add binary info for proper RP2350 boot
|
|
target_compile_definitions(basic1 PRIVATE
|
|
PICO_BOARD_ADAFRUIT_FEATHER_RP2350=1
|
|
)
|