Files
FamReynaBrain/resources/esp_sdr_project_candidate.md
2026-10-01 23:00:12 -04:00

27 lines
2.4 KiB
Markdown
Raw Permalink Blame History

This file contains ambiguous Unicode characters
This file contains Unicode characters that might be confused with other characters. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.
# ESP-SDR — potential electronics project
Date captured: 2026-10-01
Status: Idea / reference to explore; no adoption, build, or hardware test yet.
Tags: #electronics #esp32 #sdr #radio #project-idea
## Source
- Repository: https://github.com/ESPARGOS/esp-sdr (user-shared URL, without tracking parameters)
- Project overview: https://espargos.net/espsdr/
## Why it may be interesting
ESPARGOS documents an undocumented raw I/Q receive path in several ESP32-family Wi-Fi radios. The firmware turns a supported ESP32 into a low-cost, receive-only SDR for studying the 2.4 GHz band; the ESP32-C5 also supports 5 GHz reception. It sends short raw I/Q captures over USB/UART, and some chips offer on-device FFT/spectrum streaming. This could be explored as a radio-learning or 2.4 GHz spectrum-visualization project using a *spare* board, separate from household production devices.
## Constraints to validate before a pilot
- Receive-only firmware, not an RF transmitter; captures can have gaps and nominal sample rates exceed sustained serial throughput. Even continuous FFT mode analyzes selected windows, not every sample.
- The documented wider 100–6000 MHz tuning attempts are *not* hardware-validated reception across that range. Gain and power are uncalibrated.
- Supported chips listed in the README include ESP32, C3, C5, C6, C61, S2, S3, S31; support, rates, transports, and SDK pins vary by chip. Check the current `firmware-targets.json` and board identity before any build/flash.
- Repository says parts of firmware are AI-generated. GPL-3.0-or-later applies to the firmware; review license obligations before redistribution/integration.
- Do not reflash an in-use Tactility, voice, display, or home-automation board for an exploratory test. Choose a verified spare board and obtain explicit authorization before flashing.
## Next exploration
1. Pick an available spare supported board and a safe USB/UART host setup.
2. Read `docs/spectrum.md`, `docs/rx-controls.md`, target-specific code and build configuration; assess what can be visualized on the Mac mini without a new always-on service.
3. If authorized, build the appropriate pinned ESP-IDF target, run host tests, capture a known 2.4 GHz signal, and compare browser viewer output to a reference instrument or known source. Clearly label observations versus project claims.
Source verification: live GitHub repository README/API inspected 2026-10-01; no clone, tests, firmware build, or physical verification performed.