Ken Van Hoeylandt
599fa46766
- New drivers: - SD SPI - spi_peripheral - touch_placeholder - display_placeholder - Devicetree compiler: - Implement phandle-arrays - Implement device addresses - Add placeholder drivers to all devices with a SPI display - SPI driver: add `cs-pins` and set them to high on driver start - FileSystem: add `file_system_set_owner()` and `file_system_get_owner()` - File locking is now checking if the related `FileSystem` is part of a shared SPI bus - Add `device_get_child_count()` - SDMMC driver: Remove default of `slot` value - Fix for Crowpanel Basic 3.5" display (add delay to booting) - Fix for LilyGO T-HMI SD card mounting (delayed mounting by disabling it initially in the dts)
34 lines
768 B
YAML
34 lines
768 B
YAML
description: ESP32 I2S Controller
|
|
|
|
include: ["i2s-controller.yaml"]
|
|
|
|
compatible: "espressif,esp32-i2s"
|
|
|
|
properties:
|
|
port:
|
|
type: int
|
|
required: true
|
|
description: |
|
|
The port number, defined by i2s_port_t.
|
|
Depending on the hardware, these values are available: I2S_NUM_0, I2S_NUM_1
|
|
pin-bclk:
|
|
type: phandles
|
|
required: true
|
|
description: Bit clock pin
|
|
pin-ws:
|
|
type: phandles
|
|
required: true
|
|
description: Word (slot) select pin
|
|
pin-data-out:
|
|
type: phandles
|
|
default: GPIO_PIN_SPEC_NONE
|
|
description: Data output pin
|
|
pin-data-in:
|
|
type: phandles
|
|
default: GPIO_PIN_SPEC_NONE
|
|
description: Data input pin
|
|
pin-mclk:
|
|
type: phandles
|
|
default: GPIO_PIN_SPEC_NONE
|
|
description: Master clock pin
|