Ken Van Hoeylandt
599fa46766
- New drivers: - SD SPI - spi_peripheral - touch_placeholder - display_placeholder - Devicetree compiler: - Implement phandle-arrays - Implement device addresses - Add placeholder drivers to all devices with a SPI display - SPI driver: add `cs-pins` and set them to high on driver start - FileSystem: add `file_system_set_owner()` and `file_system_get_owner()` - File locking is now checking if the related `FileSystem` is part of a shared SPI bus - Add `device_get_child_count()` - SDMMC driver: Remove default of `slot` value - Fix for Crowpanel Basic 3.5" display (add delay to booting) - Fix for LilyGO T-HMI SD card mounting (delayed mounting by disabling it initially in the dts)
33 lines
951 B
C++
33 lines
951 B
C++
#include "devices/Display.h"
|
|
#include <driver/gpio.h>
|
|
|
|
#include <PwmBacklight.h>
|
|
#include <Tactility/hal/Configuration.h>
|
|
|
|
using namespace tt::hal;
|
|
|
|
static bool initBoot() {
|
|
//Set the RGB Led Pins to output and turn them off
|
|
ESP_ERROR_CHECK(gpio_set_direction(GPIO_NUM_4, GPIO_MODE_OUTPUT)); //Red
|
|
ESP_ERROR_CHECK(gpio_set_direction(GPIO_NUM_16, GPIO_MODE_OUTPUT)); //Green
|
|
ESP_ERROR_CHECK(gpio_set_direction(GPIO_NUM_17, GPIO_MODE_OUTPUT)); //Blue
|
|
|
|
//0 on, 1 off... yep it's backwards.
|
|
ESP_ERROR_CHECK(gpio_set_level(GPIO_NUM_4, 1)); //Red
|
|
ESP_ERROR_CHECK(gpio_set_level(GPIO_NUM_16, 1)); //Green
|
|
ESP_ERROR_CHECK(gpio_set_level(GPIO_NUM_17, 1)); //Blue
|
|
|
|
return driver::pwmbacklight::init(LCD_PIN_BACKLIGHT);
|
|
}
|
|
|
|
static DeviceVector createDevices() {
|
|
return {
|
|
createDisplay(),
|
|
};
|
|
}
|
|
|
|
extern const Configuration hardwareConfiguration = {
|
|
.initBoot = initBoot,
|
|
.createDevices = createDevices
|
|
};
|