Ken Van Hoeylandt
65 lines
1.6 KiB
Devicetree
65 lines
1.6 KiB
Devicetree
/dts-v1/;
|
|
|
|
#include <tactility/bindings/root.h>
|
|
#include <tactility/bindings/esp32_ble.h>
|
|
#include <tactility/bindings/esp32_wifi_pinned.h>
|
|
#include <tactility/bindings/esp32_gpio.h>
|
|
#include <tactility/bindings/esp32_i2c_master.h>
|
|
#include <tactility/bindings/esp32_spi.h>
|
|
#include <tactility/bindings/esp32_sdspi.h>
|
|
#include <bindings/xl9555.h>
|
|
|
|
// Reference: https://github.com/Xinyuan-LilyGO/T-Deck-MAX
|
|
// lib/TDeckMaxBoard/src/TDeckMaxBoard.h, docs/pinmap.md
|
|
/ {
|
|
compatible = "root";
|
|
model = "LilyGO T-Deck Max";
|
|
|
|
wifi0 {
|
|
compatible = "espressif,esp32-wifi-pinned";
|
|
status = "disabled";
|
|
};
|
|
|
|
ble0 {
|
|
compatible = "espressif,esp32-ble";
|
|
};
|
|
|
|
gpio0 {
|
|
compatible = "espressif,esp32-gpio";
|
|
gpio-count = <49>;
|
|
};
|
|
|
|
i2c0 {
|
|
compatible = "espressif,esp32-i2c-master";
|
|
port = <I2C_NUM_0>;
|
|
clock-frequency = <100000>;
|
|
pin-sda = <&gpio0 13 GPIO_FLAG_NONE>;
|
|
pin-scl = <&gpio0 14 GPIO_FLAG_NONE>;
|
|
|
|
xl9555 {
|
|
compatible = "xlsemi,xl9555";
|
|
reg = <0x20>;
|
|
};
|
|
};
|
|
|
|
spi0 {
|
|
compatible = "espressif,esp32-spi";
|
|
host = <SPI2_HOST>;
|
|
cs-gpios = <&gpio0 34 GPIO_FLAG_NONE>, // 0: EPD display
|
|
<&gpio0 48 GPIO_FLAG_NONE>, // 1: SD card
|
|
<&gpio0 3 GPIO_FLAG_NONE>; // 2: LoRa radio (SX1262, not wired up yet)
|
|
pin-mosi = <&gpio0 33 GPIO_FLAG_NONE>;
|
|
pin-miso = <&gpio0 47 GPIO_FLAG_NONE>;
|
|
pin-sclk = <&gpio0 36 GPIO_FLAG_NONE>;
|
|
// The EPD pushes its whole 9600-byte framebuffer in one SPI write, which
|
|
// exceeds the default ~4 KB transfer limit. Raise the bus limit to fit it.
|
|
max-transfer-size = <65536>;
|
|
|
|
sdcard@1 {
|
|
compatible = "espressif,esp32-sdspi";
|
|
status = "disabled";
|
|
frequency-khz = <20000>;
|
|
};
|
|
};
|
|
};
|