Ken Van Hoeylandt
3b5a401594
* **New Features** * Added native display support for ST7796, ILI9341, and ST7789 panels across supported boards. * Added FT5x06 and FT6x36 touchscreen support. * Generic PWM driver * ESP32 PWM driver * Generic RGB LED driver * RGB PWM LED driver * RGB GPIO LED driver * Implementation of RGB LED for various boards * **Improvements** * Updated board hardware descriptions to use explicit display/touch/backlight device-tree bindings and disabled deprecated HAL usage. * Improved display and touch-driver cleanup to prevent stale resources and improve shutdown reliability. * Pinned esp-hosted library to a fixed version * **Deletions** * Obsolete placeholder display * Legacy ILI9488 support. * ESP32-specific LEDC PWM implementation
107 lines
2.5 KiB
Devicetree
107 lines
2.5 KiB
Devicetree
/dts-v1/;
|
|
#include <tactility/bindings/root.h>
|
|
#include <tactility/bindings/esp32_wifi_pinned.h>
|
|
#include <tactility/bindings/esp32_gpio.h>
|
|
#include <tactility/bindings/esp32_i2c.h>
|
|
#include <tactility/bindings/esp32_spi.h>
|
|
#include <tactility/bindings/esp32_uart.h>
|
|
#include <bindings/mpu6886.h>
|
|
#include <bindings/bm8563.h>
|
|
#include <tactility/bindings/esp32_pwm_ledc.h>
|
|
#include <tactility/bindings/pwm_backlight.h>
|
|
|
|
#include <bindings/st7789.h>
|
|
#include <bindings/button_control.h>
|
|
|
|
/ {
|
|
compatible = "root";
|
|
model = "M5Stack StickC Plus2";
|
|
|
|
wifi0 {
|
|
compatible = "espressif,esp32-wifi-pinned";
|
|
status = "disabled";
|
|
};
|
|
|
|
gpio0 {
|
|
compatible = "espressif,esp32-gpio";
|
|
gpio-count = <40>;
|
|
};
|
|
|
|
i2c_internal {
|
|
compatible = "espressif,esp32-i2c";
|
|
port = <I2C_NUM_0>;
|
|
clock-frequency = <400000>;
|
|
pin-sda = <&gpio0 21 GPIO_FLAG_NONE>;
|
|
pin-scl = <&gpio0 22 GPIO_FLAG_NONE>;
|
|
|
|
mpu6886 {
|
|
compatible = "invensense,mpu6886";
|
|
reg = <0x68>;
|
|
};
|
|
|
|
bm8563 {
|
|
compatible = "belling,bm8563";
|
|
reg = <0x51>;
|
|
};
|
|
};
|
|
|
|
i2c_grove {
|
|
compatible = "espressif,esp32-i2c";
|
|
port = <I2C_NUM_1>;
|
|
clock-frequency = <400000>;
|
|
pin-sda = <&gpio0 32 GPIO_FLAG_NONE>;
|
|
pin-scl = <&gpio0 33 GPIO_FLAG_NONE>;
|
|
};
|
|
|
|
display_backlight_pwm {
|
|
compatible = "espressif,esp32-pwm-ledc";
|
|
pin = <&gpio0 27 GPIO_FLAG_NONE>;
|
|
period-ns = <1953125>;
|
|
ledc-timer = <0>;
|
|
ledc-channel = <0>;
|
|
};
|
|
|
|
display_backlight {
|
|
compatible = "pwm-backlight";
|
|
// Off by default so display power-on won't show the screen from before the last power loss.
|
|
// The display backlight is turned on during the boot process.
|
|
status = "disabled";
|
|
pwm = <&display_backlight_pwm>;
|
|
};
|
|
|
|
spi0 {
|
|
compatible = "espressif,esp32-spi";
|
|
host = <SPI2_HOST>;
|
|
cs-gpios = <&gpio0 5 GPIO_FLAG_NONE>;
|
|
pin-mosi = <&gpio0 15 GPIO_FLAG_NONE>;
|
|
pin-sclk = <&gpio0 13 GPIO_FLAG_NONE>;
|
|
|
|
display@0 {
|
|
compatible = "sitronix,st7789";
|
|
horizontal-resolution = <135>;
|
|
vertical-resolution = <240>;
|
|
gap-x = <52>;
|
|
gap-y = <40>;
|
|
invert-color;
|
|
pixel-clock-hz = <40000000>;
|
|
pin-dc = <&gpio0 14 GPIO_FLAG_NONE>;
|
|
pin-reset = <&gpio0 12 GPIO_FLAG_NONE>;
|
|
backlight = <&display_backlight>;
|
|
};
|
|
};
|
|
|
|
buttons {
|
|
compatible = "tactility,button-control";
|
|
pin-primary = <&gpio0 37 GPIO_FLAG_NONE>;
|
|
pin-secondary = <&gpio0 39 GPIO_FLAG_NONE>;
|
|
};
|
|
|
|
uart_grove: uart1 {
|
|
compatible = "espressif,esp32-uart";
|
|
status = "disabled";
|
|
port = <UART_NUM_1>;
|
|
pin-tx = <&gpio0 33 GPIO_FLAG_NONE>;
|
|
pin-rx = <&gpio0 32 GPIO_FLAG_NONE>;
|
|
};
|
|
};
|