Ken Van Hoeylandt
599fa46766
- New drivers: - SD SPI - spi_peripheral - touch_placeholder - display_placeholder - Devicetree compiler: - Implement phandle-arrays - Implement device addresses - Add placeholder drivers to all devices with a SPI display - SPI driver: add `cs-pins` and set them to high on driver start - FileSystem: add `file_system_set_owner()` and `file_system_get_owner()` - File locking is now checking if the related `FileSystem` is part of a shared SPI bus - Add `device_get_child_count()` - SDMMC driver: Remove default of `slot` value - Fix for Crowpanel Basic 3.5" display (add delay to booting) - Fix for LilyGO T-HMI SD card mounting (delayed mounting by disabling it initially in the dts)
64 lines
1.4 KiB
Devicetree
64 lines
1.4 KiB
Devicetree
/dts-v1/;
|
|
|
|
#include <tactility/bindings/root.h>
|
|
#include <tactility/bindings/esp32_ble.h>
|
|
#include <tactility/bindings/esp32_gpio.h>
|
|
#include <tactility/bindings/esp32_i2c.h>
|
|
#include <tactility/bindings/esp32_sdmmc.h>
|
|
#include <tactility/bindings/esp32_spi.h>
|
|
#include <tactility/bindings/esp32_uart.h>
|
|
#include <tactility/bindings/display_placeholder.h>
|
|
|
|
/ {
|
|
compatible = "root";
|
|
model = "LilyGO T-Dongle S3";
|
|
|
|
ble0 {
|
|
compatible = "espressif,esp32-ble";
|
|
};
|
|
|
|
gpio0 {
|
|
compatible = "espressif,esp32-gpio";
|
|
gpio-count = <49>;
|
|
};
|
|
|
|
i2c0 {
|
|
compatible = "espressif,esp32-i2c";
|
|
port = <I2C_NUM_0>;
|
|
clock-frequency = <400000>;
|
|
pin-sda = <&gpio0 44 GPIO_FLAG_NONE>;
|
|
pin-scl = <&gpio0 43 GPIO_FLAG_NONE>;
|
|
};
|
|
|
|
spi0 {
|
|
compatible = "espressif,esp32-spi";
|
|
host = <SPI2_HOST>;
|
|
cs-gpios = <&gpio0 4 GPIO_FLAG_NONE>;
|
|
pin-mosi = <&gpio0 3 GPIO_FLAG_NONE>;
|
|
pin-sclk = <&gpio0 5 GPIO_FLAG_NONE>;
|
|
|
|
display {
|
|
compatible = "display-placeholder";
|
|
};
|
|
};
|
|
|
|
sdmmc0 {
|
|
compatible = "espressif,esp32-sdmmc";
|
|
pin-clk = <&gpio0 12 GPIO_FLAG_NONE>;
|
|
pin-cmd = <&gpio0 16 GPIO_FLAG_NONE>;
|
|
pin-d0 = <&gpio0 14 GPIO_FLAG_NONE>;
|
|
pin-d1 = <&gpio0 17 GPIO_FLAG_NONE>;
|
|
pin-d2 = <&gpio0 21 GPIO_FLAG_NONE>;
|
|
pin-d3 = <&gpio0 18 GPIO_FLAG_NONE>;
|
|
slot = <SDMMC_HOST_SLOT_1>;
|
|
bus-width = <4>;
|
|
};
|
|
|
|
stemma_qt: uart1 {
|
|
compatible = "espressif,esp32-uart";
|
|
port = <UART_NUM_1>;
|
|
pin-tx = <&gpio0 43 GPIO_FLAG_NONE>;
|
|
pin-rx = <&gpio0 44 GPIO_FLAG_NONE>;
|
|
};
|
|
};
|