Ken Van Hoeylandt
d896657bf9
Device migrations: - cyd-4848S040c - guition-jc1060p470ciwy - guition-jc2432w328c - guition-jc3248w535c (known issue with display and touch, Shadowtrance will look into it) - guition-jc8048w550c - heltec-wifi-lora-32-v3 - lilygo-tdeck-max (excluding graphics) - lilygo-tdisplay - lilygo-tdisplay-s3 - lilygo-tdongle-s3 - lilygo-tlora-pager Driver migrations: - Implemented haptic driver interface in kernel - AXS15231b - BQ25896 - BQ27220 - CST328 - CST6xx - DRV2605 - JD9165 - Custom LilyGO driver for T-Lora Pager - SSD1306 - ST7701 - ST7735 - SY6970 - TCA8418 Fixes/improvements: - Boot app: support for multiple power devices, improved UI - lvgl_devices and related code: fixes for mapping - Support for arrays in dts parser
99 lines
2.4 KiB
Devicetree
99 lines
2.4 KiB
Devicetree
/dts-v1/;
|
|
|
|
#include <tactility/bindings/root.h>
|
|
#include <tactility/bindings/esp32_ble.h>
|
|
#include <tactility/bindings/esp32_wifi_pinned.h>
|
|
#include <tactility/bindings/esp32_gpio.h>
|
|
#include <tactility/bindings/esp32_i2c.h>
|
|
#include <tactility/bindings/esp32_sdmmc.h>
|
|
#include <tactility/bindings/esp32_spi.h>
|
|
#include <tactility/bindings/esp32_uart.h>
|
|
#include <tactility/bindings/esp32_pwm_ledc.h>
|
|
#include <tactility/bindings/pwm_backlight.h>
|
|
#include <bindings/st7735.h>
|
|
|
|
/ {
|
|
compatible = "root";
|
|
model = "LilyGO T-Dongle S3";
|
|
|
|
wifi0 {
|
|
compatible = "espressif,esp32-wifi-pinned";
|
|
status = "disabled";
|
|
};
|
|
|
|
ble0 {
|
|
compatible = "espressif,esp32-ble";
|
|
status = "disabled";
|
|
};
|
|
|
|
gpio0 {
|
|
compatible = "espressif,esp32-gpio";
|
|
gpio-count = <49>;
|
|
};
|
|
|
|
i2c0 {
|
|
compatible = "espressif,esp32-i2c";
|
|
port = <I2C_NUM_0>;
|
|
clock-frequency = <400000>;
|
|
pin-sda = <&gpio0 44 GPIO_FLAG_NONE>;
|
|
pin-scl = <&gpio0 43 GPIO_FLAG_NONE>;
|
|
};
|
|
|
|
display_backlight_pwm {
|
|
compatible = "espressif,esp32-pwm-ledc";
|
|
pin = <&gpio0 38 GPIO_FLAG_NONE>;
|
|
period-ns = <83333>;
|
|
ledc-timer = <0>;
|
|
ledc-channel = <0>;
|
|
};
|
|
|
|
display_backlight {
|
|
compatible = "pwm-backlight";
|
|
// Off by default so display power-on won't show the screen from before the last power loss.
|
|
// The display backlight is turned on during the boot process.
|
|
status = "disabled";
|
|
pwm = <&display_backlight_pwm>;
|
|
};
|
|
|
|
spi0 {
|
|
compatible = "espressif,esp32-spi";
|
|
host = <SPI2_HOST>;
|
|
cs-gpios = <&gpio0 4 GPIO_FLAG_NONE>;
|
|
pin-mosi = <&gpio0 3 GPIO_FLAG_NONE>;
|
|
pin-sclk = <&gpio0 5 GPIO_FLAG_NONE>;
|
|
|
|
display@0 {
|
|
compatible = "sitronix,st7735";
|
|
horizontal-resolution = <80>;
|
|
vertical-resolution = <160>;
|
|
gap-x = <26>;
|
|
gap-y = <1>;
|
|
invert-color;
|
|
bgr-order;
|
|
pixel-clock-hz = <27000000>;
|
|
pin-dc = <&gpio0 2 GPIO_FLAG_NONE>;
|
|
pin-reset = <&gpio0 1 GPIO_FLAG_NONE>;
|
|
backlight = <&display_backlight>;
|
|
};
|
|
};
|
|
|
|
sdmmc0 {
|
|
compatible = "espressif,esp32-sdmmc";
|
|
pin-clk = <&gpio0 12 GPIO_FLAG_NONE>;
|
|
pin-cmd = <&gpio0 16 GPIO_FLAG_NONE>;
|
|
pin-d0 = <&gpio0 14 GPIO_FLAG_NONE>;
|
|
pin-d1 = <&gpio0 17 GPIO_FLAG_NONE>;
|
|
pin-d2 = <&gpio0 21 GPIO_FLAG_NONE>;
|
|
pin-d3 = <&gpio0 18 GPIO_FLAG_NONE>;
|
|
slot = <SDMMC_HOST_SLOT_1>;
|
|
bus-width = <4>;
|
|
};
|
|
|
|
stemma_qt: uart1 {
|
|
compatible = "espressif,esp32-uart";
|
|
port = <UART_NUM_1>;
|
|
pin-tx = <&gpio0 43 GPIO_FLAG_NONE>;
|
|
pin-rx = <&gpio0 44 GPIO_FLAG_NONE>;
|
|
};
|
|
};
|