Ken Van Hoeylandt
599fa46766
- New drivers: - SD SPI - spi_peripheral - touch_placeholder - display_placeholder - Devicetree compiler: - Implement phandle-arrays - Implement device addresses - Add placeholder drivers to all devices with a SPI display - SPI driver: add `cs-pins` and set them to high on driver start - FileSystem: add `file_system_set_owner()` and `file_system_get_owner()` - File locking is now checking if the related `FileSystem` is part of a shared SPI bus - Add `device_get_child_count()` - SDMMC driver: Remove default of `slot` value - Fix for Crowpanel Basic 3.5" display (add delay to booting) - Fix for LilyGO T-HMI SD card mounting (delayed mounting by disabling it initially in the dts)
72 lines
1.6 KiB
Devicetree
72 lines
1.6 KiB
Devicetree
/dts-v1/;
|
|
|
|
#include <tactility/bindings/root.h>
|
|
#include <tactility/bindings/esp32_gpio.h>
|
|
#include <tactility/bindings/esp32_i2c.h>
|
|
#include <tactility/bindings/esp32_spi.h>
|
|
#include <tactility/bindings/esp32_uart.h>
|
|
#include <tactility/bindings/esp32_sdspi.h>
|
|
#include <tactility/bindings/display_placeholder.h>
|
|
|
|
/ {
|
|
compatible = "root";
|
|
model = "Guition JC2432W328C";
|
|
|
|
gpio0 {
|
|
compatible = "espressif,esp32-gpio";
|
|
gpio-count = <40>;
|
|
};
|
|
|
|
i2c_internal: i2c0 {
|
|
compatible = "espressif,esp32-i2c";
|
|
port = <I2C_NUM_0>;
|
|
clock-frequency = <400000>;
|
|
pin-sda = <&gpio0 33 GPIO_FLAG_NONE>;
|
|
pin-scl = <&gpio0 32 GPIO_FLAG_NONE>;
|
|
};
|
|
|
|
// CN1 header
|
|
i2c_external: i2c1 {
|
|
compatible = "espressif,esp32-i2c";
|
|
port = <I2C_NUM_1>;
|
|
clock-frequency = <400000>;
|
|
pin-sda = <&gpio0 21 GPIO_FLAG_NONE>;
|
|
pin-scl = <&gpio0 22 GPIO_FLAG_NONE>;
|
|
};
|
|
|
|
spi0 {
|
|
compatible = "espressif,esp32-spi";
|
|
host = <SPI2_HOST>;
|
|
cs-gpios = <&gpio0 15 GPIO_FLAG_NONE>;
|
|
pin-mosi = <&gpio0 13 GPIO_FLAG_NONE>;
|
|
pin-sclk = <&gpio0 14 GPIO_FLAG_NONE>;
|
|
|
|
display {
|
|
compatible = "display-placeholder";
|
|
};
|
|
};
|
|
|
|
spi1 {
|
|
compatible = "espressif,esp32-spi";
|
|
host = <SPI3_HOST>;
|
|
cs-gpios = <&gpio0 5 GPIO_FLAG_NONE>;
|
|
pin-mosi = <&gpio0 23 GPIO_FLAG_NONE>;
|
|
pin-miso = <&gpio0 19 GPIO_FLAG_NONE>;
|
|
pin-sclk = <&gpio0 18 GPIO_FLAG_NONE>;
|
|
|
|
sdcard@0 {
|
|
compatible = "espressif,esp32-sdspi";
|
|
frequency-khz = <20000>;
|
|
};
|
|
};
|
|
|
|
// CN1 header, JST SH 1.25, GND / IO22 / IO21 / 3.3V
|
|
uart1 {
|
|
compatible = "espressif,esp32-uart";
|
|
status = "disabled";
|
|
port = <UART_NUM_1>;
|
|
pin-tx = <&gpio0 22 GPIO_FLAG_NONE>;
|
|
pin-rx = <&gpio0 21 GPIO_FLAG_NONE>;
|
|
};
|
|
};
|