43 lines
1.3 KiB
C
43 lines
1.3 KiB
C
// SPDX-License-Identifier: Apache-2.0
|
|
#pragma once
|
|
|
|
#include <stdint.h>
|
|
#include <stdbool.h>
|
|
#include <tactility/error.h>
|
|
#include <tactility/drivers/audio_codec.h>
|
|
|
|
struct Device;
|
|
|
|
#ifdef __cplusplus
|
|
extern "C" {
|
|
#endif
|
|
|
|
/**
|
|
* @brief ES7210 codec device configuration.
|
|
*
|
|
* The ES7210 is an input-only (microphone ADC) codec. The I2C bus is the
|
|
* device's parent (per i2c-device.yaml), while the I2S controller carrying
|
|
* the (typically 4-slot TDM) audio data is referenced via a devicetree phandle.
|
|
*/
|
|
struct Es7210Config {
|
|
/** I2C address on the bus (typically 0x40) */
|
|
uint8_t address;
|
|
/** I2S controller device that carries audio data */
|
|
struct Device* i2s_device;
|
|
/** Bitmask of microphones to enable, e.g. ES7210_SEL_MIC1 | ES7210_SEL_MIC2 | ... */
|
|
uint8_t mic_selected_mask;
|
|
/**
|
|
* Extra fixed digital gain multiplier applied by audio_stream on top of the ES7210's
|
|
* own hardware ADC gain (already at a hard-coded 30dB default out of a 0..37.5dB
|
|
* range), as an integer percentage (100 = 1.0x / no extra boost). Small MEMS mic
|
|
* capsules can still sound quiet even near max hardware gain; this is for boards where
|
|
* 30dB hardware gain alone isn't enough. devicetree has no float property type, hence
|
|
* the x100 integer encoding.
|
|
*/
|
|
uint16_t input_gain_percent;
|
|
};
|
|
|
|
#ifdef __cplusplus
|
|
}
|
|
#endif
|