Files
tactility/Devices/elecrow-crowpanel-basic-50/elecrow,crowpanel-basic-50.dts
Ken Van Hoeylandt 599fa46766 Driver improvements (#535)
- New drivers:
  - SD SPI
  - spi_peripheral
  - touch_placeholder
  - display_placeholder
- Devicetree compiler:
  - Implement phandle-arrays
  - Implement device addresses
- Add placeholder drivers to all devices with a SPI display
- SPI driver: add `cs-pins` and set them to high on driver start
- FileSystem: add `file_system_set_owner()` and `file_system_get_owner()`
- File locking is now checking if the related `FileSystem` is part of a shared SPI bus
- Add `device_get_child_count()`
- SDMMC driver: Remove default of `slot` value
- Fix for Crowpanel Basic 3.5" display (add delay to booting)
- Fix for LilyGO T-HMI SD card mounting (delayed mounting by disabling it initially in the dts)
2026-06-27 17:32:05 +02:00

53 lines
1.1 KiB
Devicetree

/dts-v1/;
#include <tactility/bindings/root.h>
#include <tactility/bindings/esp32_ble.h>
#include <tactility/bindings/esp32_gpio.h>
#include <tactility/bindings/esp32_i2c.h>
#include <tactility/bindings/esp32_spi.h>
#include <tactility/bindings/esp32_uart.h>
#include <tactility/bindings/esp32_sdspi.h>
/ {
compatible = "root";
model = "Elecrow CrowPanel Basic 5.0";
ble0 {
compatible = "espressif,esp32-ble";
};
gpio0 {
compatible = "espressif,esp32-gpio";
gpio-count = <49>;
};
i2c0 {
compatible = "espressif,esp32-i2c";
port = <I2C_NUM_0>;
clock-frequency = <400000>;
pin-sda = <&gpio0 19 GPIO_FLAG_NONE>;
pin-scl = <&gpio0 20 GPIO_FLAG_NONE>;
};
spi0 {
compatible = "espressif,esp32-spi";
host = <SPI2_HOST>;
cs-gpios = <&gpio0 10 GPIO_FLAG_NONE>;
pin-mosi = <&gpio0 11 GPIO_FLAG_NONE>;
pin-miso = <&gpio0 13 GPIO_FLAG_NONE>;
pin-sclk = <&gpio0 12 GPIO_FLAG_NONE>;
sdcard@0 {
compatible = "espressif,esp32-sdspi";
frequency-khz = <20000>;
};
};
uart0 {
compatible = "espressif,esp32-uart";
port = <UART_NUM_0>;
pin-tx = <&gpio0 43 GPIO_FLAG_NONE>;
pin-rx = <&gpio0 44 GPIO_FLAG_NONE>;
};
};