/dts-v1/;

#include <tactility/bindings/root.h>
#include <tactility/bindings/esp32_ble.h>
#include <tactility/bindings/esp32_wifi_pinned.h>
#include <tactility/bindings/esp32_gpio.h>
#include <tactility/bindings/esp32_i2c.h>
#include <tactility/bindings/esp32_sdspi.h>
#include <tactility/bindings/esp32_spi.h>
#include <tactility/bindings/esp32_pwm_ledc.h>
#include <tactility/bindings/pwm_backlight.h>
#include <bindings/st7701.h>
#include <bindings/gt911.h>

/ {
	compatible = "root";
	model = "CYD 4848S040C";

	wifi0 {
		compatible = "espressif,esp32-wifi-pinned";
		status = "disabled";
	};

	ble0 {
		compatible = "espressif,esp32-ble";
		status = "disabled";
	};

	gpio0 {
		compatible = "espressif,esp32-gpio";
		gpio-count = <49>;
	};

	i2c0 {
		compatible = "espressif,esp32-i2c";
		port = <I2C_NUM_0>;
		clock-frequency = <400000>;
		pin-sda = <&gpio0 19 GPIO_FLAG_NONE>;
		pin-scl = <&gpio0 45 GPIO_FLAG_NONE>;

		touch0 {
			// No reset/interrupt pin wired up here, matching the original deprecated-HAL
			// config (Gt911Touch::Configuration was constructed with no reset/interrupt pin
			// arguments on this board).
			compatible = "goodix,gt911";
			reg = <0x5D>;
			x-max = <480>;
			y-max = <480>;
		};
	};

	display_backlight_pwm {
		compatible = "espressif,esp32-pwm-ledc";
		pin = <&gpio0 38 GPIO_FLAG_NONE>;
		period-ns = <1000000>;
		ledc-timer = <0>;
		ledc-channel = <0>;
	};

	display_backlight {
		compatible = "pwm-backlight";
		pwm = <&display_backlight_pwm>;
	};

	display0 {
		compatible = "sitronix,st7701";
		horizontal-resolution = <480>;
		vertical-resolution = <480>;
		pixel-clock-hz = <14000000>;
		hsync-pulse-width = <10>;
		hsync-back-porch = <10>;
		hsync-front-porch = <20>;
		vsync-pulse-width = <10>;
		vsync-back-porch = <10>;
		vsync-front-porch = <10>;
		num-fbs = <2>;
		double-fb;
		bounce-buffer-size-px = <4800>;
		bb-invalidate-cache;
		pin-hsync = <&gpio0 16 GPIO_FLAG_NONE>;
		pin-vsync = <&gpio0 17 GPIO_FLAG_NONE>;
		pin-de = <&gpio0 18 GPIO_FLAG_NONE>;
		pin-pclk = <&gpio0 21 GPIO_FLAG_NONE>;
		pin-data0 = <&gpio0 4 GPIO_FLAG_NONE>; // B1
		pin-data1 = <&gpio0 5 GPIO_FLAG_NONE>; // B2
		pin-data2 = <&gpio0 6 GPIO_FLAG_NONE>; // B3
		pin-data3 = <&gpio0 7 GPIO_FLAG_NONE>; // B4
		pin-data4 = <&gpio0 15 GPIO_FLAG_NONE>; // B5
		pin-data5 = <&gpio0 8 GPIO_FLAG_NONE>; // G1
		pin-data6 = <&gpio0 20 GPIO_FLAG_NONE>; // G2
		pin-data7 = <&gpio0 3 GPIO_FLAG_NONE>; // G3
		pin-data8 = <&gpio0 46 GPIO_FLAG_NONE>; // G4
		pin-data9 = <&gpio0 9 GPIO_FLAG_NONE>; // G5
		pin-data10 = <&gpio0 10 GPIO_FLAG_NONE>; // G6
		pin-data11 = <&gpio0 11 GPIO_FLAG_NONE>; // R1
		pin-data12 = <&gpio0 12 GPIO_FLAG_NONE>; // R2
		pin-data13 = <&gpio0 13 GPIO_FLAG_NONE>; // R3
		pin-data14 = <&gpio0 14 GPIO_FLAG_NONE>; // R4
		pin-data15 = <&gpio0 0 GPIO_FLAG_NONE>; // R5

		// 3-wire bit-banged command bus. GPIO47/48 are physically shared with this board's SD
		// card SPI2 bus (MOSI/SCLK) - no alternate pins exist on this PCB. No SD card device is
		// declared in this devicetree yet (CS/MISO pins are unverified), but if one is added on
		// SPI2_HOST later, declare it *after* this node: starting that SPI bus unconditionally
		// reprograms the GPIO matrix for its MOSI/SCLK pins (see esp32_spi.cpp's start()),
		// which reclaims them from this display's bit-banged use without any extra code.
		pin-cs = <&gpio0 39 GPIO_FLAG_NONE>;
		pin-scl = <&gpio0 48 GPIO_FLAG_NONE>;
		pin-sda = <&gpio0 47 GPIO_FLAG_NONE>;
		mirror-by-cmd;

		init-sequence = [
			// Vendor bring-up sequence for this panel. Framing is
			// [cmd, data-len, delay-ms, data-len bytes of data...] - see st7701-module's
			// init-sequence binding property for the encoding.
			0xFF 5  0    0x77 0x01 0x00 0x00 0x10
			0xC0 2  0    0x3B 0x00
			0xC1 2  0    0x0D 0x02
			0xC2 2  0    0x31 0x05
			0xCD 1  0    0x00
			// Positive Voltage Gamma Control
			0xB0 16 0    0x00 0x11 0x18 0x0E 0x11 0x06 0x07 0x08 0x07 0x22 0x04 0x12 0x0F 0xAA 0x31 0x18
			// Negative Voltage Gamma Control
			0xB1 16 0    0x00 0x11 0x19 0x0E 0x12 0x07 0x08 0x08 0x08 0x22 0x04 0x11 0x11 0xA9 0x32 0x18
			// Page1
			0xFF 5  0    0x77 0x01 0x00 0x00 0x11
			0xB0 1  0    0x60 // Vop=4.7375v
			0xB1 1  0    0x32 // VCOM=32
			0xB2 1  0    0x07 // VGH=15v
			0xB3 1  0    0x80
			0xB5 1  0    0x49 // VGL=-10.17v
			0xB7 1  0    0x85
			0xB8 1  0    0x21 // AVDD=6.6 & AVCL=-4.6
			0xC1 1  0    0x78
			0xC2 1  0    0x78
			0xE0 3  0    0x00 0x1B 0x02
			0xE1 11 0    0x08 0xA0 0x00 0x00 0x07 0xA0 0x00 0x00 0x00 0x44 0x44
			0xE2 12 0    0x11 0x11 0x44 0x44 0xED 0xA0 0x00 0x00 0xEC 0xA0 0x00 0x00
			0xE3 4  0    0x00 0x00 0x11 0x11
			0xE4 2  0    0x44 0x44
			0xE5 16 0    0x0A 0xE9 0xD8 0xA0 0x0C 0xEB 0xD8 0xA0 0x0E 0xED 0xD8 0xA0 0x10 0xEF 0xD8 0xA0
			0xE6 4  0    0x00 0x00 0x11 0x11
			0xE7 2  0    0x44 0x44
			0xE8 16 0    0x09 0xE8 0xD8 0xA0 0x0B 0xEA 0xD8 0xA0 0x0D 0xEC 0xD8 0xA0 0x0F 0xEE 0xD8 0xA0
			0xEB 7  0    0x02 0x00 0xE4 0xE4 0x88 0x00 0x40
			0xEC 2  0    0x3C 0x00
			0xED 16 0    0xAB 0x89 0x76 0x54 0x02 0xFF 0xFF 0xFF 0xFF 0xFF 0xFF 0x20 0x45 0x67 0x98 0xBA
			// VAP & VAN
			0xFF 5  0    0x77 0x01 0x00 0x00 0x13
			0xE5 1  0    0xE4
			0xFF 5  0    0x77 0x01 0x00 0x00 0x00
			0x3A 1  10   0x60 // 0x70 RGB888, 0x60 RGB666, 0x50 RGB565
			0x11 0  120       // Sleep Out
			0x29 0  0         // Display On
		];

		backlight = <&display_backlight>;
	};

	spi0 {
		compatible = "espressif,esp32-spi";
		host = <SPI2_HOST>;
		cs-gpios = <&gpio0 42 GPIO_FLAG_NONE>;
		pin-mosi = <&gpio0 47 GPIO_FLAG_NONE>;
		pin-miso = <&gpio0 41 GPIO_FLAG_NONE>;
		pin-sclk = <&gpio0 48 GPIO_FLAG_NONE>;

		sdcard@0 {
			compatible = "espressif,esp32-sdspi";
			frequency-khz = <20000>;
		};
	};
};