description: >
  XPT2046 resistive touch controller driven over bit-banged (software) SPI on plain GPIO
  pins, for boards where no hardware SPI peripheral is available for touch (e.g. both
  SPI2_HOST and SPI3_HOST are already claimed by the display and SD card).

compatible: "xptek,xpt2046-softspi"

properties:
  pin-mosi:
    type: phandles
    required: true
    description: MOSI (controller-out, peripheral-in) GPIO pin
  pin-miso:
    type: phandles
    required: true
    description: MISO (controller-in, peripheral-out) GPIO pin
  pin-sck:
    type: phandles
    required: true
    description: Clock GPIO pin
  pin-cs:
    type: phandles
    required: true
    description: Chip-select GPIO pin
  x-max:
    type: int
    required: true
    description: Maximum X coordinate reported by the controller (typically the panel's horizontal resolution)
  y-max:
    type: int
    required: true
    description: Maximum Y coordinate reported by the controller (typically the panel's vertical resolution)
  swap-xy:
    type: boolean
    default: false
    description: Swap the X and Y axes
  mirror-x:
    type: boolean
    default: false
    description: Mirror the X axis
  mirror-y:
    type: boolean
    default: false
    description: Mirror the Y axis
  power-supply:
    type: boolean
    default: false
    description: Expose a power-supply device that reports battery voltage/capacity read from the XPT2046's v-bat input
  power-supply-reference-voltage-mv:
    type: int
    default: 4200
    description: Battery voltage (in mV) considered 100% capacity, used to compute POWER_SUPPLY_PROP_CAPACITY