/dts-v1/;

#include <tactility/bindings/root.h>
#include <tactility/bindings/esp32_adc_oneshot.h>
#include <tactility/bindings/esp32_ble.h>
#include <tactility/bindings/esp32_gpio.h>
#include <tactility/bindings/esp32_i2c.h>
#include <tactility/bindings/esp32_i2s.h>
#include <tactility/bindings/esp32_pwm_ledc.h>
#include <tactility/bindings/esp32_sdmmc.h>
#include <tactility/bindings/esp32_spi.h>
#include <tactility/bindings/esp32_wifi_pinned.h>
#include <tactility/bindings/battery_sense.h>
#include <tactility/bindings/gpio_hog.h>
#include <tactility/bindings/pwm_backlight.h>
#include <bindings/st77922.h>
#include <bindings/st77922_touch.h>
#include <bindings/es8311.h>

/ {
	compatible = "root";
	model = "LCDWIKI/Hosyond ES3C35P";

	wifi0 {
		compatible = "espressif,esp32-wifi-pinned";
		status = "disabled";
	};

	ble0 {
		compatible = "espressif,esp32-ble";
		status = "disabled";
	};

	gpio0 {
		compatible = "espressif,esp32-gpio";
		gpio-count = <49>;
	};

	/* FM8002E speaker amplifier enable, active-low on GPIO1. */
	amp_enable {
		compatible = "gpio-hog";
		pin = <&gpio0 1 GPIO_FLAG_NONE>;
		mode = <GPIO_HOG_MODE_OUTPUT_LOW>;
	};

	adc0 {
		compatible = "espressif,esp32-adc-oneshot";
		unit-id = <ADC_UNIT_1>;
		clk-src = <ADC_RTC_CLK_SRC_DEFAULT>;
		channels = <ADC_CHANNEL_7 ADC_ATTEN_DB_12 ADC_BITWIDTH_DEFAULT>;
	};

	/* BAT+ through a 200K/200K divider into GPIO8 / ADC1_CH7. */
	battery-sense {
		compatible = "battery-sense";
		io-channel = <&adc0 0>;
		reference-voltage-mv = <3300>;
		multiplier = <2000>;
	};

	i2s0 {
		compatible = "espressif,esp32-i2s";
		port = <I2S_NUM_0>;
		pin-bclk = <&gpio0 18 GPIO_FLAG_NONE>;
		pin-ws = <&gpio0 21 GPIO_FLAG_NONE>;
		pin-data-out = <&gpio0 15 GPIO_FLAG_NONE>;
		pin-data-in = <&gpio0 16 GPIO_FLAG_NONE>;
		pin-mclk = <&gpio0 17 GPIO_FLAG_NONE>;
	};

	i2c0 {
		compatible = "espressif,esp32-i2c";
		port = <I2C_NUM_0>;
		clock-frequency = <400000>;
		pin-sda = <&gpio0 38 GPIO_FLAG_NONE>;
		pin-scl = <&gpio0 39 GPIO_FLAG_NONE>;

		touch@55 {
			compatible = "sitronix,st77922-touch";
			reg = <0x55>;
			x-max = <320>;
			y-max = <480>;
			pin-reset = <&gpio0 48 GPIO_FLAG_NONE>;
			pin-interrupt = <&gpio0 47 GPIO_FLAG_NONE>;
		};

		es8311: es8311@18 {
			compatible = "everest,es8311";
			reg = <0x18>;
			i2s = <&i2s0>;
		};
	};

	display_backlight_pwm {
		compatible = "espressif,esp32-pwm-ledc";
		pin = <&gpio0 41 GPIO_FLAG_NONE>;
		period-ns = <200000>;
		ledc-timer = <0>;
		ledc-channel = <0>;
	};

	display_backlight {
		compatible = "pwm-backlight";
		status = "disabled";
		pwm = <&display_backlight_pwm>;
	};

	spi0 {
		compatible = "espressif,esp32-spi";
		host = <SPI2_HOST>;
		pin-sclk = <&gpio0 12 GPIO_FLAG_NONE>;
		pin-mosi = <&gpio0 11 GPIO_FLAG_NONE>;
		pin-miso = <&gpio0 13 GPIO_FLAG_NONE>;
		pin-wp = <&gpio0 14 GPIO_FLAG_NONE>;
		pin-hd = <&gpio0 9 GPIO_FLAG_NONE>;
		cs-gpios = <&gpio0 10 GPIO_FLAG_NONE>;
		/* Accommodate the driver's 1/10-frame DMA staging transfers, matching
		 * the vendor LVGL port's full-frame refresh path. */
		max-transfer-size = <65536>;

		display@0 {
			compatible = "sitronix,st77922";
			horizontal-resolution = <320>;
			vertical-resolution = <480>;
			/* 80 MHz works in the vendor demo, but produces visible QSPI corruption on
			 * some modules/cables. The component's 40 MHz default is reliably clean. */
			pixel-clock-hz = <40000000>;
			backlight = <&display_backlight>;
		};
	};

	sdmmc0 {
		compatible = "espressif,esp32-sdmmc";
		pin-clk = <&gpio0 5 GPIO_FLAG_NONE>;
		pin-cmd = <&gpio0 4 GPIO_FLAG_NONE>;
		pin-d0 = <&gpio0 6 GPIO_FLAG_NONE>;
		pin-d1 = <&gpio0 7 GPIO_FLAG_NONE>;
		pin-d2 = <&gpio0 2 GPIO_FLAG_NONE>;
		pin-d3 = <&gpio0 3 GPIO_FLAG_NONE>;
		slot = <SDMMC_HOST_SLOT_1>;
		bus-width = <4>;
	};
};