/dts-v1/;

#include <tactility/bindings/root.h>
#include <tactility/bindings/esp32_ble.h>
#include <tactility/bindings/esp32_wifi_pinned.h>
#include <tactility/bindings/esp32_gpio.h>
#include <tactility/bindings/esp32_i2c.h>
#include <tactility/bindings/esp32_spi.h>
#include <tactility/bindings/esp32_uart.h>
#include <tactility/bindings/esp32_sdspi.h>
#include <tactility/bindings/gpio_backlight.h>
#include <bindings/rgb_display.h>
#include <bindings/gt911.h>
#include <bindings/tca9534.h>

/ {
	compatible = "root";
	model = "Elecrow CrowPanel Advance 5.0";

	wifi0 {
		compatible = "espressif,esp32-wifi-pinned";
		status = "disabled";
	};

	ble0 {
		compatible = "espressif,esp32-ble";
		status = "disabled";
	};

	gpio0 {
		compatible = "espressif,esp32-gpio";
		gpio-count = <49>;
	};

	i2c0 {
		compatible = "espressif,esp32-i2c";
		port = <I2C_NUM_0>;
		clock-frequency = <400000>;
		pin-sda = <&gpio0 15 GPIO_FLAG_NONE>;
		pin-scl = <&gpio0 16 GPIO_FLAG_NONE>;

		io_expander0 {
			compatible = "ti,tca9534";
			reg = <0x18>;
		};

		touch0 {
			// Reset pin 38 and interrupt pin 18 (or INT = NC) exist on the board but are not
			// wired up here - conflicting schematic info, unverified (matches the original
			// deprecated-HAL config).
			compatible = "goodix,gt911";
			reg = <0x5D>;
			x-max = <800>;
			y-max = <480>;
		};
	};

	spi0 {
		compatible = "espressif,esp32-spi";
		host = <SPI2_HOST>;
		cs-gpios = <&gpio0 0 GPIO_FLAG_NONE>;
		pin-mosi = <&gpio0 6 GPIO_FLAG_NONE>;
		pin-miso = <&gpio0 4 GPIO_FLAG_NONE>;
		pin-sclk = <&gpio0 5 GPIO_FLAG_NONE>;

		sdcard@0 {
			compatible = "espressif,esp32-sdspi";
			frequency-khz = <20000>;
		};
	};

	display_backlight {
		compatible = "gpio-backlight";
		pin = <&io_expander0 1 GPIO_FLAG_NONE>;
	};

	display0 {
		compatible = "espressif,esp32-rgb-display";
		horizontal-resolution = <800>;
		vertical-resolution = <480>;
		pixel-clock-hz = <15000000>;
		hsync-pulse-width = <4>;
		hsync-back-porch = <8>;
		hsync-front-porch = <8>;
		vsync-pulse-width = <4>;
		vsync-back-porch = <8>;
		vsync-front-porch = <8>;
		pclk-active-neg;
		bounce-buffer-size-px = <4000>;
		pin-hsync = <&gpio0 40 GPIO_FLAG_NONE>;
		pin-vsync = <&gpio0 41 GPIO_FLAG_NONE>;
		pin-de = <&gpio0 42 GPIO_FLAG_NONE>;
		pin-pclk = <&gpio0 39 GPIO_FLAG_NONE>;
		pin-data0 = <&gpio0 21 GPIO_FLAG_NONE>; // B3
		pin-data1 = <&gpio0 47 GPIO_FLAG_NONE>; // B4
		pin-data2 = <&gpio0 48 GPIO_FLAG_NONE>; // B5
		pin-data3 = <&gpio0 45 GPIO_FLAG_NONE>; // B6
		pin-data4 = <&gpio0 38 GPIO_FLAG_NONE>; // B7
		pin-data5 = <&gpio0 9 GPIO_FLAG_NONE>; // G2
		pin-data6 = <&gpio0 10 GPIO_FLAG_NONE>; // G3
		pin-data7 = <&gpio0 11 GPIO_FLAG_NONE>; // G4
		pin-data8 = <&gpio0 12 GPIO_FLAG_NONE>; // G5
		pin-data9 = <&gpio0 13 GPIO_FLAG_NONE>; // G6
		pin-data10 = <&gpio0 14 GPIO_FLAG_NONE>; // G7
		pin-data11 = <&gpio0 7 GPIO_FLAG_NONE>; // R3
		pin-data12 = <&gpio0 17 GPIO_FLAG_NONE>; // R4
		pin-data13 = <&gpio0 18 GPIO_FLAG_NONE>; // R5
		pin-data14 = <&gpio0 3 GPIO_FLAG_NONE>; // R6
		pin-data15 = <&gpio0 46 GPIO_FLAG_NONE>; // R7
		backlight = <&display_backlight>;
	};

	uart0 {
		compatible = "espressif,esp32-uart";
		port = <UART_NUM_0>;
		pin-tx = <&gpio0 43 GPIO_FLAG_NONE>;
		pin-rx = <&gpio0 44 GPIO_FLAG_NONE>;
	};

	uart1 {
		compatible = "espressif,esp32-uart";
		port = <UART_NUM_1>;
		pin-tx = <&gpio0 20 GPIO_FLAG_NONE>;
		pin-rx = <&gpio0 19 GPIO_FLAG_NONE>;
	};
};