/dts-v1/;

#include <tactility/bindings/root.h>
#include <tactility/bindings/esp32_ble.h>
#include <tactility/bindings/esp32_wifi_pinned.h>
#include <tactility/bindings/esp32_gpio.h>
#include <tactility/bindings/esp32_i2c.h>
#include <tactility/bindings/esp32_sdmmc.h>
#include <tactility/bindings/esp32_spi.h>
#include <tactility/bindings/display_placeholder.h>
#include <tactility/bindings/pointer_placeholder.h>

/ {
	compatible = "root";
	model = "LilyGO T-HMI";

	wifi0 {
		compatible = "espressif,esp32-wifi-pinned";
		status = "disabled";
	};

	ble0 {
		compatible = "espressif,esp32-ble";
		status = "disabled";
	};

	gpio0 {
		compatible = "espressif,esp32-gpio";
		gpio-count = <49>;
	};
	
	spi0 {
		compatible = "espressif,esp32-spi";
		host = <SPI2_HOST>;
		cs-gpios = <&gpio0 6 GPIO_FLAG_NONE>, // Display
		           <&gpio0 2 GPIO_FLAG_NONE>; // Touch
		pin-mosi = <&gpio0 3 GPIO_FLAG_NONE>;
		pin-miso = <&gpio0 4 GPIO_FLAG_NONE>;
		pin-sclk = <&gpio0 1 GPIO_FLAG_NONE>;

		display@0 {
			compatible = "display-placeholder";
		};

		touch@1 {
			compatible = "pointer-placeholder";
		};
	};

	sdmmc0 {
		compatible = "espressif,esp32-sdmmc";
		status = "disabled"; // Late-init is required, otherwise mounting fails
		pin-clk = <&gpio0 12 GPIO_FLAG_NONE>;
		pin-cmd = <&gpio0 11 GPIO_FLAG_NONE>;
		pin-d0 = <&gpio0 13 GPIO_FLAG_NONE>;
		slot = <SDMMC_HOST_SLOT_1>;
		bus-width = <1>;
		pullups;
	};
};