Merge remote-tracking branch 'upstream/main' into feature/es3c28p-es3c35p-modern

- Add server support to `http-module`
- Ensure `DevelopmentService` works on all platforms (including posix)
- Ensure the built-in web server with dashboard works on all platforms (inluding posix). It still has some issues with certain featuers, but the basics work.

.claude/rules/CLAUDE.md

@@ -0,0 +1,65 @@
+# CLAUDE.md
+
+Behavioral guidelines to reduce common LLM coding mistakes. Merge with project-specific instructions as needed.
+
+**Tradeoff:** These guidelines bias toward caution over speed. For trivial tasks, use judgment.
+
+## 1. Think Before Coding
+
+**Don't assume. Don't hide confusion. Surface tradeoffs.**
+
+Before implementing:
+- State your assumptions explicitly. If uncertain, ask.
+- If multiple interpretations exist, present them - don't pick silently.
+- If a simpler approach exists, say so. Push back when warranted.
+- If something is unclear, stop. Name what's confusing. Ask.
+
+## 2. Simplicity First
+
+**Minimum code that solves the problem. Nothing speculative.**
+
+- No features beyond what was asked.
+- No abstractions for single-use code.
+- No "flexibility" or "configurability" that wasn't requested.
+- No error handling for impossible scenarios.
+- If you write 200 lines and it could be 50, rewrite it.
+
+Ask yourself: "Would a senior engineer say this is overcomplicated?" If yes, simplify.
+
+## 3. Surgical Changes
+
+**Touch only what you must. Clean up only your own mess.**
+
+When editing existing code:
+- Don't "improve" adjacent code, comments, or formatting.
+- Don't refactor things that aren't broken.
+- Match existing style, even if you'd do it differently.
+- If you notice unrelated dead code, mention it - don't delete it.
+
+When your changes create orphans:
+- Remove imports/variables/functions that YOUR changes made unused.
+- Don't remove pre-existing dead code unless asked.
+
+The test: Every changed line should trace directly to the user's request.
+
+## 4. Goal-Driven Execution
+
+**Define success criteria. Loop until verified.**
+
+Transform tasks into verifiable goals:
+- "Add validation" → "Write tests for invalid inputs, then make them pass"
+- "Fix the bug" → "Write a test that reproduces it, then make it pass"
+- "Refactor X" → "Ensure tests pass before and after"
+
+For multi-step tasks, state a brief plan:
+```
+1. [Step] → verify: [check]
+2. [Step] → verify: [check]
+3. [Step] → verify: [check]
+```
+
+Strong success criteria let you loop independently. Weak criteria ("make it work") require constant clarification.
+
+---
+
+**These guidelines are working if:** fewer unnecessary changes in diffs, fewer rewrites due to overcomplication, and clarifying questions come before implementation rather than after mistakes.

.claude/rules/app-framework.md

@@ -0,0 +1,18 @@
+# Architecture: App Framework
+
+Apps are event-driven, C API (`app-module`, `<app/*.h>`), not a C++ class. Each app has an `AppManifest` (`id`, `name`, `category`, `location`, `flags`) and a `main(argc, argv)` entry point (`AppMainFn`), modelled on a C program's `main()`. Every app instance gets its own dedicated task for its whole lifetime, and blocks in that task until it returns. Use `app_scheduler_current_app_id()` (`app/scheduler.h`) to identify the running instance - it's not passed as a parameter.
+
+Lifecycle and inter-app communication go through `app_manager_*()` (`app/manager.h`) and `app_event_*()` (`app/event.h`):
+- `app_manager_start()`/`app_manager_start_with_parameters()` launch a plain instance; `app_manager_start_for_result()` launches a modal child that reports back to a parent instance.
+- An app subscribes with `app_event_subscribe()` (registers for its own instance's events, no id argument needed), blocks via `task_event_group_wait()`/`task_event_group_wait_any()`, and drains with `app_event_poll()`, reacting to `APP_EVENT_CLOSE` (terminate now) and `APP_EVENT_RESULT` (a child it started reported back).
+- An app closes itself by calling `app_manager_finish()` right before returning from `main()`; another instance is closed via `app_manager_stop()`.
+
+Apps are registered at startup via `app_manager_add()`. External apps can be loaded from SD card via `manifest.properties` files, or side-loaded as ELF binaries on ESP32 (see `app/loader.h`'s `AppLoaderApi`).
+
+Apps can be loaded from:
+
+- memory (`APP_LOCATION_MEMORY`)
+- a path pointing to an install folder where an `.app` file was installed (`APP_LOCATION_PATH`)
+- a path pointing to an `.elf` file (`APP_LOCATION_PATH`)
+
+An app can build an optional UI via the LVGL window-manager module (see `lvgl.md`).

.claude/rules/architecture-device-model.md

@@ -0,0 +1,10 @@
+# Architecture: Device/Driver/Module System (kernel layer, C API)
+
+The kernel uses a Linux-inspired device model:
+
+- **Module** (`struct Module`): loadable unit that registers drivers, hardware and symbols. Lifecycle: `module_construct` → `module_add` → `module_start`. Each device board and platform is a module.
+- **Driver** (`struct Driver`): binds to devices via `compatible` strings (like devicetree). Has `start_device`/`stop_device` callbacks and an `api` pointer for type-specific operations.
+- **Device** (`struct Device`): represents hardware. Lifecycle: `device_construct` → `device_add` → `device_start`. Has a parent-child tree, driver binding, and locking.
+- **DeviceType** (`struct DeviceType`): enables discovering devices by category (e.g. `DISPLAY_TYPE`, `TOUCH_TYPE`, `UART_CONTROLLER_TYPE`).
+
+Devices are defined via **devicetree** `.dts` files in each `Devices/<id>/` folder. A custom devicetree compiler (`Buildscripts/DevicetreeCompiler/compile.py`) generates C code from these files. Each device folder also has a `devicetree.yaml` specifying dependencies and the `.dts` file.

.claude/rules/architecture-layers.md

@@ -0,0 +1,7 @@
+# Architecture: Layer Stack (bottom to top)
+
+- **TactilityKernel** — C API kernel: device/driver/module lifecycle, concurrency primitives (thread, mutex, timer, dispatcher), filesystem, logging. Header convention: `<tactility/*.h>` (lowercase snake_case).
+- **TactilityFreeRtos** — Thin C++ wrappers around FreeRTOS primitives.
+- **Tactility** — Main OS layer: app framework, service framework, LVGL integration, networking and services (Wi-Fi, BLE, NTP, ESP-NOW), settings, i18n.
+- **TactilityC** — C bindings (`tt_*.h`) for Tactility, used by side-loaded ELF apps on ESP32. Deprecated, replaced by TactilityKernel.
+- **Firmware** — Entry point (`app_main`).

.claude/rules/build-system.md

@@ -0,0 +1,5 @@
+# Architecture: Build System
+
+The `tactility_add_module()` CMake macro (in `Buildscripts/module.cmake`) wraps ESP-IDF's `idf_component_register` on ESP32 and standard `add_library` on POSIX, allowing the same source to build for both targets.
+
+`device.py` reads `Devices/<id>/device.properties` and generates the `sdkconfig` file with all necessary ESP-IDF config (target chip, flash size, SPIRAM, LVGL fonts, Bluetooth, USB, etc.).

.claude/rules/building.md

@@ -0,0 +1,62 @@
+# Building
+
+## Git
+
+The repository uses git submodules. Make sure to use `--recurse-submodules` on relevant git commands.
+
+## Simulator (Linux/macOS, no ESP-IDF needed)
+
+> [!IMPORTANT]
+> The simulator does **NOT** build or run on native Windows (Win32/PowerShell/cmd). This is
+> a hard platform limitation, not a missing tool or PATH issue — do not attempt `cmake -B
+> buildsim` on Windows, it will not work. WSL is a separate, Linux environment and is fine.
+
+```bash
+cmake -B buildsim -G Ninja
+ninja -C buildsim              # build firmware + tests
+./buildsim/Firmware/Tactility   # run simulator
+```
+
+## ESP32 firmware
+
+```bash
+python device.py <device-id>   # generate sdkconfig for device (e.g. lilygo-tdeck)
+python device.py <device-id> --dev  # dev mode: force 4MB partition table
+idf.py build                   # build firmware
+idf.py flash monitor            # flash and monitor
+```
+
+Device IDs are the folder names under `Devices/` (e.g. `lilygo-tdeck`, `m5stack-cores3`, `cyd-2432s028r`).
+
+### Windows: activating the ESP-IDF environment
+
+On native Windows, `idf.py` is not on PATH by default — it must be activated per-shell first.
+The install script places a PowerShell profile activator per IDF version at
+`%IDF_TOOLS_PATH%\Microsoft.v<version>.PowerShell_profile.ps1` (path controlled by the
+`IDF_TOOLS_PATH` environment variable, set to wherever ESP-IDF's tools were installed, e.g.
+`C:\Espressif\tools`). Source it before running any `idf.py` command:
+
+```powershell
+. "$env:IDF_TOOLS_PATH\Microsoft.v5.5.2.PowerShell_profile.ps1"   # match the installed IDF version
+Set-Location "<repo-root>"
+idf.py build 2>&1 | Select-Object -Last 250
+```
+
+This is Windows-specific setup (the main dev works on Linux, where `idf.py` is normally
+already on PATH via `export.sh`/`. ./export.sh` or a shell profile).
+
+## Devicetree
+
+A device implementation has a `.dts` file.
+The parser at `Buildscripts/DevicetreeCompiler/` converts DTS into C code.
+It's called from the `Firmware/` build process.
+
+## Tests
+
+Tests use Doctest and run on simulator (POSIX) target only:
+
+```bash
+cmake -B buildsim -G Ninja
+ninja -C buildsim build-tests
+cd buildsim && ctest --test-dir Tests
+```

.claude/rules/coding-style.md

@@ -0,0 +1,34 @@
+# Coding Style
+
+Two conventions coexist; which one to use depends on the project layer:
+
+- **C code** (TactilityKernel, drivers): `lower_snake_case` for files, functions, variables. `UpperCamelCase` for types. Files in `source/`, `include/`, `private/` directories.
+- **C++ code** (Tactility, apps, services): `UpperCamelCase` for files and types. `lowerCamelCase` for functions. Files in `Source/`, `Include/`, `Private/` directories.
+
+For projects that emit C headers and have a C++ implementation file: the internal C++ function naming should be snake_case.
+
+Formatting is enforced by `.clang-format` (LLVM-based, 4-space indent, no column limit).
+Never throw exceptions — use return types for error handling. Use `enum class` over plain `enum` when writing C++ code.
+Do not add redundant null checks for parameters with an explicit non-null precondition.
+
+Code Comments:
+
+- Should be as short as possible, leaving only important context.
+- Should avoid explaining what the code does, unless the code complexity is high enough to warrant an explanation.
+- Must avoid explaining how the code was before, or how it was changed.
+- Should explain why code is implemented.
+- Should be as brief as possible without losing critical information.
+- Should avoid explaining what was not implemented.
+- Should avoid referring to designs of other subsystems.
+- Must avoid interjections: avoid hyphens or braces to interject. If interjections provide crucial info, use Doxygen entity/anchor references like:
+/**
+ * A dedicated completion \signal for one app instance's task.
+ * Whichever \side finishes with it last is the one that deletes `semaphore` and frees this struct.
+ *
+ * \signal Not the task's shared default FreeRTOS notification, which app_event.cpp's AppEventSubscription also uses.
+ *     An unrelated event delivered to the same task could otherwise unblock a waiter early.
+ * \side The exiting task or a concurrent app_scheduler_stop() that found the entry in time and is waiting on `semaphore`.
+ */
+```
+
+

.claude/rules/hardware-abstraction-layer.md

@@ -0,0 +1,38 @@
+# Architecture: Hardware Abstraction Layer
+
+## Driver
+
+A driver generally consists of:
+- Registration of driver in parent module (optional, but desirable)
+- YAML bindings in the `bindings/` folder
+- An `#include` that is used in the `.dts` file. The include is in `[projectname]/bindings/[drivername].h`
+- The driver implementation: a `.cpp` and `.h` file. The implementation is C++, but the header exposes pure C functions. C implementations are allowed, but C++ is preferred.
+
+Drivers are part of a kernel module.
+
+A driver whose device sits on a shared SPI controller (parent device type `SPI_CONTROLLER_TYPE`)
+must bracket its own bus access with `spi_controller_lock()`/`spi_controller_unlock()`
+(`spi_controller_lock_bus_of()`/`spi_controller_unlock_bus_of()` for the common case of a direct
+child), at the logical-operation level rather than per primitive. This is not done for you by the
+kernel's generic device-type wrappers (`display.cpp`, `pointer.cpp`, etc.) - only the driver knows
+for certain which of its calls touch the bus.
+
+Modules with drivers can be stored in:
+- TactilityKernel
+- A subproject in `Platforms` folder
+- A subproject in `Devices` folder
+- A subproject in `Drivers` folder
+
+## Kernel Modules
+
+Kernel module names are lower case and postfixed with `-module`.
+
+Projects that are kernel modules:
+
+1. Declare a `struct Module`
+2. Contain a `devicetree.yaml` file that declares a list of dependencies (for parsing the devicetree) and specifies the bindings folder that contains the drivers' YAML definitions. For example:
+```yaml
+dependencies:
+  - TactilityKernel
+bindings: bindings
+```

.claude/rules/key-conventions.md

@@ -0,0 +1,8 @@
+# Key Conventions
+
+- Shared cross-platform code uses `#ifdef ESP_PLATFORM` for ESP32-specific paths.
+  Code in `Platforms/PlatformEsp32/` is already ESP-only and does not need guards around ESP-IDF includes.
+- The `Drivers/` directory contains hardware drivers (display controllers, touch controllers, PMICs, etc.) — each is its own CMake component.
+- `Modules/` contains cross-cutting modules. e.g.`lvgl-module` (LVGL task management).
+- `Data/system/` and `Data/data/` are flashed as FAT filesystem images on ESP32.
+- Translations are in `Translations/` as CSV files, generated via `generate.py`.

.claude/rules/lvgl.md

@@ -0,0 +1,8 @@
+# Architecture: LVGL
+
+User interfaces should scale well for everything between very large (e.g. 1280x720) and small (e.g. 135x240) displays. Vertical and horizontal layouts are supported.
+
+Two kernel modules cover LVGL:
+
+- **`lvgl-module`** (`Modules/lvgl-module/`, `<lvgl/*.h>`) owns LVGL's lifecycle: init/deinit, the LVGL task loop, and `lvgl_lock()`/`lvgl_try_lock()`/`lvgl_unlock()` mutex-based locking that any task must hold before touching LVGL objects. It bridges Tactility's device model to LVGL indevs (`lvgl/devices/*.h`: `display`, `pointer`, `keyboard`, `trackball`), and provides shared fonts (`lvgl/fonts.h`: Montserrat text sizes, Material Symbols icon sets for statusbar/launcher/shared use) and a few shared widgets (`lvgl/widgets/*.h`: `toolbar`, `spinner`, `sliderbox`).
+- **`lvgl-window-manager-module`** (`Modules/lvgl-window-manager-module/`, `<lvgl_window_manager/*.h>`) manages a single stacked window per app instance on top of `lvgl-module`. `window_manager_start()`/`window_manager_stop()` create/tear down the root widget (plus optional chrome from a configured `WindowManagerScreenInitFn`); `window_manager_create()`/`window_manager_remove()` push/pop an app's window and (re)populate it via a `WindowCreateWidgetsFn`. Only the topmost window ever has live widgets - burying and resurfacing a window deletes and rebuilds its widget tree rather than hiding/showing it. That rebuild-on-remove path can run `create_widgets` on a *different* app's thread (whichever app's `window_manager_remove()` call caused this window to resurface), so `create_widgets` must only rebuild already-committed state, never decide what happens next - state transitions belong in the app's own `main()` event loop, driven by real `APP_EVENT_RESULT`s.

.claude/rules/platform-abstraction.md

@@ -0,0 +1,4 @@
+# Architecture: Platform Abstraction
+
+- `Platforms/platform-esp32/` — ESP-IDF specific implementations
+- `Platforms/platform-posix/` — POSIX simulator implementations (SDL for display)

.claude/rules/project-overview.md

@@ -0,0 +1,3 @@
+# Project Overview
+
+Tactility is an operating system for the ESP32 microcontroller family. It runs on 40+ supported devices (CYD boards, LilyGO, M5Stack, Elecrow, etc.) and includes a desktop simulator. Built with C++23, ESP-IDF, LVGL, and FreeRTOS.

.claude/rules/service-framework.md

@@ -0,0 +1,3 @@
+# Architecture: Service Framework
+
+Services are a C API (`service-module`, `<service/*.h>`), not a C++ class. Each service has a `ServiceManifest` (`id`, `create_service`/`destroy_service` for its custom data, `on_start`/`on_stop` callbacks) registered via `service_manager_add()`, and is started/stopped via `service_manager_start()`/`service_manager_stop()`. Services are long-running background processes (GUI, Wi-Fi, loader, statusbar, GPS, etc.).

.claude/rules/tests.md

@@ -0,0 +1 @@
+Tests for projects should be placed in the `Tests/` or `tests/` subfolder of that project.

.github/ISSUE_TEMPLATE/bug_report.md

@@ -30,4 +30,4 @@ If applicable, add screenshots to help explain your problem.
 
 **Additional context**
 Add any other context about the problem here.
-Add your oops.tactility.one URL if you had a crash (scanned from QR).
+Add your oops.tactilityproject.org URL if you had a crash (scanned from QR).

.github/PULL_REQUEST_TEMPLATE/pull_request_template.md

@@ -1,7 +1,7 @@
 ### Checklist 
 
-- [ ] I read [contribution guidelines](https://github.com/ByteWelder/Tactility/blob/main/CONTRIBUTING.md)
+- [ ] I read [contribution guidelines](https://github.com/TactilityProject/Tactility/blob/main/CONTRIBUTING.md)
-- [ ] Code adheres to the [coding style](https://github.com/ByteWelder/Tactility/blob/main/CODING_STYLE.md)
+- [ ] Code adheres to the [coding style](https://github.com/TactilityProject/Tactility/blob/main/CODING_STYLE.md)
 
 ### Description
 

.github/actions/build-firmware/action.yml

@@ -11,21 +11,28 @@ inputs:
 runs:
   using: "composite"
   steps:
-    - uses: actions/checkout@v4
+    - uses: actions/checkout@v6
       with:
         submodules: recursive
     - name: 'Board select'
       shell: bash
-      run: cp sdkconfig.board.${{ inputs.board_id }} sdkconfig
+      run: python device.py ${{ inputs.board_id }}
     - name: 'Build'
       uses: espressif/esp-idf-ci-action@v1
       with:
-        esp_idf_version: v5.5
+        esp_idf_version: v5.5.2
         target: ${{ inputs.arch }}
         path: './'
     - name: 'Release'
       shell: bash
       run: Buildscripts/release.sh ${{ inputs.board_id }}
+    - name: 'Merge binary'
+      shell: bash
+      run: |
+        python -m pip install esptool
+        cd release/Tactility-${{ inputs.board_id }}
+        bash ./merge.sh ${{ inputs.arch }}
+        mv Binaries/merged_binary.bin ../Tactility-${{ inputs.board_id }}.bin
     - name: 'Upload Artifact: Release'
       uses: actions/upload-artifact@v4
       with:
@@ -38,3 +45,9 @@ runs:
         name: Tactility-${{ inputs.board_id }}-symbols
         path: release/Tactility-${{ inputs.board_id }}-symbols
         retention-days: 30
+    - name: 'Upload Artifact: Merged binary'
+      uses: actions/upload-artifact@v4
+      with:
+        name: Tactility-${{ inputs.board_id }}.bin
+        path: release/Tactility-${{ inputs.board_id }}.bin
+        retention-days: 30

.github/actions/build-sdk-posix/action.yml

@@ -0,0 +1,41 @@
+name: Build
+
+runs:
+  using: "composite"
+  steps:
+    - uses: actions/checkout@v6
+      with:
+        submodules: recursive
+        persist-credentials: false
+    - name: 'Detect architecture'
+      id: arch
+      shell: bash
+      run: echo "value=$(uname -m)" >> "$GITHUB_OUTPUT"
+    - name: 'Configure'
+      shell: bash
+      run: cmake -S ./ -B buildsim
+    - name: 'Build'
+      shell: bash
+      run: cmake --build buildsim --target TactilityKernel lvgl minitar minmea $(cat Buildscripts/release-sdk-modules.txt)
+    - name: 'Release'
+      shell: bash
+      run: python Buildscripts/release-sdk-posix.py release/TactilitySDK
+    - name: 'Test Integration Prep'
+      shell: bash
+      env:
+        TACTILITY_ARCH: ${{ steps.arch.outputs.value }}
+      run: |
+        TACTILITY_SDK_NAME="$(cat version.txt)-posix-$TACTILITY_ARCH"
+        mkdir -p test_sdk/$TACTILITY_SDK_NAME
+        cp -r release/TactilitySDK test_sdk/$TACTILITY_SDK_NAME
+    - name: 'Test Integration'
+      shell: bash
+      env:
+        TACTILITY_ARCH: ${{ steps.arch.outputs.value }}
+      run: cd Tests/SdkIntegration && TACTILITY_SDK_PATH=../../test_sdk python tactility.py build -a posix-$TACTILITY_ARCH --local-sdk
+    - name: 'Upload Artifact'
+      uses: actions/upload-artifact@v4
+      with:
+        name: TactilitySDK-posix-${{ steps.arch.outputs.value }}
+        path: release/TactilitySDK
+        retention-days: 30

.github/actions/build-sdk/action.yml

@@ -11,25 +11,39 @@ inputs:
 runs:
   using: "composite"
   steps:
-    - uses: actions/checkout@v4
+    - uses: actions/checkout@v6
       with:
         submodules: recursive
     - name: 'Board select'
       shell: bash
-      run: cp sdkconfig.board.${{ inputs.board_id }} sdkconfig
+      run: python device.py ${{ inputs.board_id }}
     - name: 'Build'
       uses: espressif/esp-idf-ci-action@v1
       with:
         # NOTE: Update with ESP-IDF!
-        esp_idf_version: v5.5
+        esp_idf_version: v5.5.2
         target: ${{ inputs.arch }}
         path: './'
     - name: 'Release'
       shell: bash
       env:
         # NOTE: Update with ESP-IDF!
-        ESP_IDF_VERSION: '5.5'
+        ESP_IDF_VERSION: '5.5.2'
-      run: Buildscripts/release-sdk.sh release/TactilitySDK
+      run: python Buildscripts/release-sdk-esp32.py release/TactilitySDK
+    - name: 'Test Integration Prep'
+      shell: bash
+      # The manifest.properties of our integration test uses version 0.0.0 to indicate that it is not using a normal SDK
+      # This way, it only works with our custom build. That means we have to create a copy of the SDK with the correct folder structure:
+      run: |
+        TACTILITY_SDK_NAME="$(cat version.txt)-${{ inputs.arch }}"
+        mkdir -p test_sdk/$TACTILITY_SDK_NAME
+        cp -r release/TactilitySDK test_sdk/$TACTILITY_SDK_NAME
+    - name: 'Test Integration'
+      uses: espressif/esp-idf-ci-action@v1
+      with:
+        esp_idf_version: v5.5.2
+        target: ${{ inputs.arch }}
+        command: export TACTILITY_SDK_PATH=../../test_sdk && cd Tests/SdkIntegration && python tactility.py build -a ${{ inputs.arch }} --local-sdk
     - name: 'Upload Artifact'
       uses: actions/upload-artifact@v4
       with:

.github/actions/build-simulator/action.yml

@@ -15,7 +15,7 @@ runs:
   using: "composite"
   steps:
     - name: "Checkout repo"
-      uses: actions/checkout@v2
+      uses: actions/checkout@v6
       with:
         submodules: recursive
     - name: Install Linux Dependencies for SDL
@@ -45,7 +45,7 @@ runs:
       run: cmake -S ./ -B buildsim
     - name: "Build Tests"
       shell: bash
-      run: cmake --build buildsim --target FirmwareSim
+      run: cmake --build buildsim --target Tactility
     - name: 'Release'
       shell: bash
       run: Buildscripts/release-simulator.sh buildsim release/Simulator-${{ inputs.os_name }}-${{ inputs.platform_name }}

.github/actions/bundle-artifacts/action.yml

@@ -0,0 +1,15 @@
+name: Bundle All
+
+runs:
+  using: 'composite'
+  steps:
+    - name: 'Download artifacts'
+      uses: actions/download-artifact@v4
+      with:
+        path: artifacts
+    - name: 'Upload Artifact'
+      uses: actions/upload-artifact@v4
+      with:
+        name: 'all-artifacts'
+        path: artifacts/
+        retention-days: 3

.github/actions/publish-firmware/action.yml

@@ -0,0 +1,24 @@
+name: Publish Firmware
+
+inputs:
+  cdn_version:
+    description: The version that determines the path on the CDN
+    required: true
+
+runs:
+  using: 'composite'
+  steps:
+    - name: 'Download all-artifacts'
+      uses: actions/download-artifact@v4
+      with:
+        name: 'all-artifacts'
+        path: artifacts
+    - name: 'Install boto3'
+      shell: bash
+      run: pip install boto3
+    - name: 'Generate files'
+      shell: bash
+      run: version=`cat version.txt` && python Buildscripts/CDN/generate-firmware-files.py artifacts artifacts-cdn $version
+    - name: 'Upload files'
+      shell: bash
+      run: python Buildscripts/CDN/upload-firmware-files.py artifacts-cdn ${{ inputs.cdn_version }} ${{ env.CDN_ID }} ${{ env.CDN_TOKEN_NAME }} ${{ env.CDN_TOKEN_VALUE }}

.github/actions/publish-sdk/action.yml

@@ -0,0 +1,19 @@
+name: Publish SDK
+
+runs:
+  using: 'composite'
+  steps:
+    - name: 'Download all-artifacts'
+      uses: actions/download-artifact@v4
+      with:
+        name: 'all-artifacts'
+        path: artifacts
+    - name: 'Install boto3'
+      shell: bash
+      run: pip install boto3
+    - name: 'Generate files'
+      shell: bash
+      run: version=`cat version.txt` && python Buildscripts/CDN/generate-sdk-files.py artifacts artifacts-cdn $version
+    - name: 'Upload files'
+      shell: bash
+      run: version=`cat version.txt` && python Buildscripts/CDN/upload-sdk-files.py artifacts-cdn $version ${{ env.CDN_ID }} ${{ env.CDN_TOKEN_NAME }} ${{ env.CDN_TOKEN_VALUE }}

.github/workflows/build-firmware.yml

@@ -1,54 +0,0 @@
-name: Build Firmware
-on:
-  push:
-    branches:
-      - main
-  pull_request:
-    types: [ opened, synchronize, reopened ]
-
-permissions: read-all
-
-jobs:
-  build:
-    strategy:
-      matrix:
-        board: [
-          { id: cyd-2432s024c, arch: esp32 },
-          { id: cyd-2432s028r, arch: esp32 },
-          { id: cyd-2432s028rv3, arch: esp32 },
-          { id: cyd-e32r28t, arch: esp32 },
-          { id: cyd-e32r32p, arch: esp32 },
-          { id: cyd-2432s032c, arch: esp32 },
-          { id: cyd-jc2432w328c, arch: esp32 },
-          { id: cyd-8048s043c, arch: esp32s3 },
-          { id: cyd-jc8048w550c, arch: esp32s3 },
-          { id: cyd-4848s040c, arch: esp32s3 },
-          { id: elecrow-crowpanel-advance-28, arch: esp32s3 },
-          { id: elecrow-crowpanel-advance-35, arch: esp32s3 },
-          { id: elecrow-crowpanel-advance-50, arch: esp32s3 },
-          { id: elecrow-crowpanel-basic-28, arch: esp32 },
-          { id: elecrow-crowpanel-basic-35, arch: esp32 },
-          { id: elecrow-crowpanel-basic-50, arch: esp32s3 },
-          { id: lilygo-tdeck, arch: esp32s3 },
-          { id: lilygo-tdongle-s3, arch: esp32s3 },
-          { id: lilygo-tlora-pager, arch: esp32s3 },
-          { id: m5stack-cardputer, arch: esp32s3 },
-          { id: m5stack-cardputer-adv, arch: esp32s3 },
-          { id: m5stack-core2, arch: esp32 },
-          { id: m5stack-cores3, arch: esp32s3 },
-          { id: m5stack-stickc-plus, arch: esp32 },
-          { id: m5stack-stickc-plus2, arch: esp32 },
-          { id: unphone, arch: esp32s3 },
-          { id: waveshare-s3-touch-lcd-43, arch: esp32s3 },
-          { id: waveshare-s3-touch-lcd-147, arch: esp32s3 },
-          { id: waveshare-s3-touch-lcd-128, arch: esp32s3 },
-          { id: waveshare-s3-lcd-13, arch: esp32s3 }
-        ]
-    runs-on: ubuntu-latest
-    steps:
-      - uses: actions/checkout@v4
-      - name: "Build"
-        uses: ./.github/actions/build-firmware
-        with:
-          board_id: ${{ matrix.board.id }}
-          arch: ${{ matrix.board.arch }}

.github/workflows/build-sdk.yml

@@ -1,26 +0,0 @@
-name: Build SDK
-on:
-  push:
-    branches:
-      - main
-  pull_request:
-    types: [ opened, synchronize, reopened ]
-
-permissions: read-all
-
-jobs:
-  build:
-    strategy:
-      matrix:
-        board: [
-          { id: cyd-2432s028r, arch: esp32 },
-          { id: lilygo-tdeck, arch: esp32s3 },
-        ]
-    runs-on: ubuntu-latest
-    steps:
-      - uses: actions/checkout@v4
-      - name: "Build"
-        uses: ./.github/actions/build-sdk
-        with:
-          board_id: ${{ matrix.board.id }}
-          arch: ${{ matrix.board.arch }}

.github/workflows/build-simulator.yml

@@ -10,7 +10,9 @@ jobs:
   Linux:
     runs-on: ubuntu-24.04
     steps:
-      - uses: actions/checkout@v4
+      - uses: actions/checkout@v6
+        with:
+          persist-credentials: false
       - name: "Build"
         uses: ./.github/actions/build-simulator
         with:
@@ -20,7 +22,9 @@ jobs:
   macOS:
     runs-on: macos-latest
     steps:
-      - uses: actions/checkout@v4
+      - uses: actions/checkout@v6
+        with:
+          persist-credentials: false
       - name: "Build"
         uses: ./.github/actions/build-simulator
         with:

.github/workflows/build.yml

@@ -0,0 +1,117 @@
+name: Build Firmware
+on:
+  push:
+    branches:
+      - main
+    tags:
+      - v*
+  pull_request:
+    types: [ opened, synchronize, reopened ]
+
+permissions: read-all
+
+jobs:
+  BuildSdkEsp32:
+    strategy:
+      matrix:
+        board: [
+          { id: generic-esp32, arch: esp32 },
+          { id: generic-esp32c6, arch: esp32c6 },
+          { id: generic-esp32p4, arch: esp32p4 },
+          { id: generic-esp32s3, arch: esp32s3 },
+        ]
+    runs-on: ubuntu-latest
+    steps:
+      - uses: actions/checkout@v6
+        with:
+          persist-credentials: false
+      - name: "Build SDK"
+        uses: ./.github/actions/build-sdk
+        with:
+          board_id: ${{ matrix.board.id }}
+          arch: ${{ matrix.board.arch }}
+  BuildSdkPosix:
+    runs-on: ubuntu-latest
+    steps:
+      - uses: actions/checkout@v6
+        with:
+          persist-credentials: false
+      - name: "Build SDK"
+        uses: ./.github/actions/build-sdk-posix
+  GenerateDeviceMatrix:
+    runs-on: ubuntu-latest
+    needs: [ BuildSdkEsp32 ]
+    outputs:
+      matrix: ${{ steps.set-matrix.outputs.matrix }}
+    steps:
+      - uses: actions/checkout@v6
+        with:
+          persist-credentials: false
+      - id: set-matrix
+        run: python3 Buildscripts/gh-generate-device-matrix.py
+  BuildFirmware:
+    runs-on: ubuntu-latest
+    needs: GenerateDeviceMatrix
+    strategy:
+      matrix: ${{ fromJSON(needs.GenerateDeviceMatrix.outputs.matrix) }}
+    steps:
+      - uses: actions/checkout@v6
+        with:
+          persist-credentials: false
+      - name: "Build Firmware"
+        uses: ./.github/actions/build-firmware
+        with:
+          board_id: ${{ matrix.board.id }}
+          arch: ${{ matrix.board.arch }}
+  BundleArtifacts:
+    runs-on: ubuntu-latest
+    needs: [ BuildFirmware, BuildSdkPosix ]
+    if: |
+      (github.event_name == 'push' && github.ref == 'refs/heads/main') ||
+      (github.event_name == 'push' && startsWith(github.ref, 'refs/tags/v'))
+    steps:
+      - uses: actions/checkout@v6
+        with:
+          persist-credentials: false
+      - name: "Bundle Artifacts"
+        uses: ./.github/actions/bundle-artifacts
+  PublishFirmwareSnapshot:
+    runs-on: ubuntu-latest
+    needs: [ BundleArtifacts ]
+    if: (github.event_name == 'push' && github.ref == 'refs/heads/main')
+    steps:
+      - uses: actions/checkout@v6
+      - name: "Publish Firmware Snapshot"
+        env:
+          CDN_ID: ${{ secrets.CDN_ID }}
+          CDN_TOKEN_NAME: ${{ secrets.CDN_TOKEN_NAME }}
+          CDN_TOKEN_VALUE: ${{ secrets.CDN_TOKEN_VALUE }}
+        uses: ./.github/actions/publish-firmware
+        with:
+          cdn_version: snapshot
+  PublishFirmwareStable:
+    runs-on: ubuntu-latest
+    needs: [ BundleArtifacts ]
+    if: (github.event_name == 'push' && startsWith(github.ref, 'refs/tags/v'))
+    steps:
+      - uses: actions/checkout@v6
+      - name: "Publish Firmware Stable"
+        env:
+          CDN_ID: ${{ secrets.CDN_ID }}
+          CDN_TOKEN_NAME: ${{ secrets.CDN_TOKEN_NAME }}
+          CDN_TOKEN_VALUE: ${{ secrets.CDN_TOKEN_VALUE }}
+        uses: ./.github/actions/publish-firmware
+        with:
+          cdn_version: stable
+  PublishSdk:
+    runs-on: ubuntu-latest
+    needs: [ BundleArtifacts ]
+    if: (github.event_name == 'push' && (github.ref == 'refs/heads/main' || startsWith(github.ref, 'refs/tags/v')))
+    steps:
+      - uses: actions/checkout@v6
+      - name: "Publish SDKs"
+        env:
+          CDN_ID: ${{ secrets.CDN_ID }}
+          CDN_TOKEN_NAME: ${{ secrets.CDN_TOKEN_NAME }}
+          CDN_TOKEN_VALUE: ${{ secrets.CDN_TOKEN_VALUE }}
+        uses: ./.github/actions/publish-sdk

.github/workflows/tests.yml

@@ -4,13 +4,13 @@ on:
     branches:
       - main
   pull_request:
-    types: [opened, synchronize, reopened]
+    types: [ opened, synchronize, reopened ]
 jobs:
-  run:
+  TactilityTests:
     runs-on: ubuntu-latest
     steps:
       - name: "Checkout repo"
-        uses: actions/checkout@v2
+        uses: actions/checkout@v6
         with:
           submodules: recursive
       - name: "Configure Project"
@@ -19,7 +19,19 @@ jobs:
         run: cmake -S ./ -B build
       - name: "Build Tests"
         run: cmake --build build --target build-tests
-      - name: "Run TactilityCore Tests"
+      - name: "Run Tests"
-        run: build/Tests/TactilityCore/TactilityCoreTests --exit
+        run: ctest --test-dir build/Tests
-      - name: "Run TactilityHeadless Tests"
+  DevicetreeTests:
-        run: build/Tests/Tactility/TactilityTests --exit
+    runs-on: ubuntu-latest
+    steps:
+      - uses: actions/checkout@v6
+        with:
+          persist-credentials: false
+          submodules: recursive
+      - name: "Install Python Dependencies"
+        shell: bash
+        run: pip install lark==1.3.1 pyyaml==6.0.3
+      - name: "Run Devicetree Tests"
+        shell: bash
+        working-directory: Buildscripts/DevicetreeCompiler/tests
+        run: python test_integration.py

.gitignore

@@ -1,10 +1,9 @@
 .idea/
 .DS_Store
 
-build/
+build*/
-buildsim/
+!.github/actions/build*/
-build-sim/
+cmake*/
-cmake-build-*/
 CMakeCache.txt
 *.cbp
 CMakeFiles
@@ -18,6 +17,14 @@ managed_components/
 dependencies.lock
 
 .vscode/
+*.code-workspace
 .gitpod.yml
 
-sdkconfig.board.*.dev
+sdkconfig.board.*.dev
+
+.tactility/
+
+.caveman.json
+.ai/mcp
+
+__pycache__

.gitmodules

@@ -16,3 +16,6 @@
 [submodule "Libraries/cJSON/cJSON"]
 	path = Libraries/cJSON/cJSON
 	url = https://github.com/DaveGamble/cJSON.git
+[submodule "Libraries/esp_epaper"]
+	path = Libraries/esp_epaper
+	url = https://github.com/NellowTCS/esp_epaper.git

Boards/cyd-2432s024c/CMakeLists.txt

@@ -1,7 +0,0 @@
-file(GLOB_RECURSE SOURCE_FILES Source/*.c*)
-
-idf_component_register(
-    SRCS ${SOURCE_FILES}
-    INCLUDE_DIRS "Source"
-    REQUIRES Tactility esp_lvgl_port ILI934x CST816S PwmBacklight driver vfs fatfs
-)

Boards/cyd-2432s024c/Source/Configuration.cpp

@@ -1,116 +0,0 @@
-#include "devices/Display.h"
-#include "devices/SdCard.h"
-
-#include <Tactility/hal/Configuration.h>
-#include <Tactility/lvgl/LvglSync.h>
-#include <PwmBacklight.h>
-
-static bool initBoot() {
-    // Set the RGB LED Pins to output and turn them off
-    ESP_ERROR_CHECK(gpio_set_direction(GPIO_NUM_4, GPIO_MODE_OUTPUT)); // Red
-    ESP_ERROR_CHECK(gpio_set_direction(GPIO_NUM_16, GPIO_MODE_OUTPUT)); // Green
-    ESP_ERROR_CHECK(gpio_set_direction(GPIO_NUM_17, GPIO_MODE_OUTPUT)); // Blue
-
-    // 0 on, 1 off
-    ESP_ERROR_CHECK(gpio_set_level(GPIO_NUM_4, 1)); // Red
-    ESP_ERROR_CHECK(gpio_set_level(GPIO_NUM_16, 1)); // Green
-    ESP_ERROR_CHECK(gpio_set_level(GPIO_NUM_17, 1)); // Blue
-
-    return driver::pwmbacklight::init(LCD_PIN_BACKLIGHT);
-}
-
-static tt::hal::DeviceVector createDevices() {
-    return {
-        createDisplay(),
-        createSdCard()
-    };
-}
-
-extern const tt::hal::Configuration hardwareConfiguration = {
-    .initBoot = initBoot,
-    .createDevices = createDevices,
-    .i2c = {
-        tt::hal::i2c::Configuration {
-            .name = "First",
-            .port = I2C_NUM_0,
-            .initMode = tt::hal::i2c::InitMode::ByTactility,
-            .isMutable = true,
-            .config = (i2c_config_t) {
-                .mode = I2C_MODE_MASTER,
-                .sda_io_num = GPIO_NUM_33,
-                .scl_io_num = GPIO_NUM_32,
-                .sda_pullup_en = false,
-                .scl_pullup_en = false,
-                .master = {
-                    .clk_speed = 400000
-                },
-                .clk_flags = 0
-            }
-        },
-        tt::hal::i2c::Configuration {
-            .name = "Second",
-            .port = I2C_NUM_1,
-            .initMode = tt::hal::i2c::InitMode::Disabled,
-            .isMutable = true,
-            .config = (i2c_config_t) {
-                .mode = I2C_MODE_MASTER,
-                .sda_io_num = GPIO_NUM_NC,
-                .scl_io_num = GPIO_NUM_NC,
-                .sda_pullup_en = false,
-                .scl_pullup_en = false,
-                .master = {
-                    .clk_speed = 400000
-                },
-                .clk_flags = 0
-            }
-        }
-    },
-    .spi {
-        tt::hal::spi::Configuration {
-            .device = SPI2_HOST,
-            .dma = SPI_DMA_CH_AUTO,
-            .config = {
-                .mosi_io_num = GPIO_NUM_13,
-                .miso_io_num = GPIO_NUM_NC,
-                .sclk_io_num = GPIO_NUM_14,
-                .quadwp_io_num = GPIO_NUM_NC, // Quad SPI LCD driver is not yet supported
-                .quadhd_io_num = GPIO_NUM_NC, // Quad SPI LCD driver is not yet supported
-                .data4_io_num = GPIO_NUM_NC,
-                .data5_io_num = GPIO_NUM_NC,
-                .data6_io_num = GPIO_NUM_NC,
-                .data7_io_num = GPIO_NUM_NC,
-                .data_io_default_level = false,
-                .max_transfer_sz = LCD_SPI_TRANSFER_SIZE_LIMIT,
-                .flags = 0,
-                .isr_cpu_id = ESP_INTR_CPU_AFFINITY_AUTO,
-                .intr_flags = 0
-            },
-            .initMode = tt::hal::spi::InitMode::ByTactility,
-            .isMutable = false,
-            .lock = tt::lvgl::getSyncLock() // esp_lvgl_port owns the lock for the display
-        },
-        tt::hal::spi::Configuration {
-            .device = SPI3_HOST,
-            .dma = SPI_DMA_CH_AUTO,
-            .config = {
-                .mosi_io_num = GPIO_NUM_23,
-                .miso_io_num = GPIO_NUM_19,
-                .sclk_io_num = GPIO_NUM_18,
-                .quadwp_io_num = GPIO_NUM_NC, // Quad SPI LCD driver is not yet supported
-                .quadhd_io_num = GPIO_NUM_NC, // Quad SPI LCD driver is not yet supported
-                .data4_io_num = GPIO_NUM_NC,
-                .data5_io_num = GPIO_NUM_NC,
-                .data6_io_num = GPIO_NUM_NC,
-                .data7_io_num = GPIO_NUM_NC,
-                .data_io_default_level = false,
-                .max_transfer_sz = 8192,
-                .flags = 0,
-                .isr_cpu_id = ESP_INTR_CPU_AFFINITY_AUTO,
-                .intr_flags = 0
-            },
-            .initMode = tt::hal::spi::InitMode::ByTactility,
-            .isMutable = false,
-            .lock = nullptr
-        },
-    }
-};

Boards/cyd-2432s024c/Source/devices/Display.cpp

@@ -1,45 +0,0 @@
-#include "Display.h"
-#include "Cst816Touch.h"
-
-#include <Ili934xDisplay.h>
-#include <PwmBacklight.h>
-
-static std::shared_ptr<tt::hal::touch::TouchDevice> createTouch() {
-    // Note: GPIO 25 for reset and GPIO 21 for interrupt?
-    auto configuration = std::make_unique<Cst816sTouch::Configuration>(
-        I2C_NUM_0,
-        240,
-        320
-    );
-
-    return std::make_shared<Cst816sTouch>(std::move(configuration));
-}
-
-std::shared_ptr<tt::hal::display::DisplayDevice> createDisplay() {
-    Ili934xDisplay::Configuration panel_configuration = {
-        .horizontalResolution = LCD_HORIZONTAL_RESOLUTION,
-        .verticalResolution = LCD_VERTICAL_RESOLUTION,
-        .gapX = 0,
-        .gapY = 0,
-        .swapXY = false,
-        .mirrorX = true,
-        .mirrorY = false,
-        .invertColor = false,
-        .swapBytes = true,
-        .bufferSize = LCD_BUFFER_SIZE,
-        .touch = createTouch(),
-        .backlightDutyFunction = driver::pwmbacklight::setBacklightDuty,
-        .resetPin = GPIO_NUM_NC,
-        .rgbElementOrder = LCD_RGB_ELEMENT_ORDER_BGR
-    };
-
-    auto spi_configuration = std::make_shared<Ili934xDisplay::SpiConfiguration>(Ili934xDisplay::SpiConfiguration {
-        .spiHostDevice = LCD_SPI_HOST,
-        .csPin = LCD_PIN_CS,
-        .dcPin = LCD_PIN_DC,
-        .pixelClockFrequency = 40'000'000,
-        .transactionQueueDepth = 10
-    });
-
-    return std::make_shared<Ili934xDisplay>(panel_configuration, spi_configuration, true);
-}

Boards/cyd-2432s024c/Source/devices/Display.h

@@ -1,19 +0,0 @@
-#pragma once
-
-#include <Tactility/hal/display/DisplayDevice.h>
-#include <driver/gpio.h>
-#include <driver/spi_common.h>
-#include <memory>
-
-// Display
-constexpr auto LCD_PIN_BACKLIGHT = GPIO_NUM_27;
-constexpr auto LCD_SPI_HOST = SPI2_HOST;
-constexpr auto LCD_PIN_CS = GPIO_NUM_15;
-constexpr auto LCD_PIN_DC = GPIO_NUM_2;
-constexpr auto LCD_HORIZONTAL_RESOLUTION = 240;
-constexpr auto LCD_VERTICAL_RESOLUTION = 320;
-constexpr auto LCD_BUFFER_HEIGHT = LCD_VERTICAL_RESOLUTION / 10;
-constexpr auto LCD_BUFFER_SIZE = LCD_HORIZONTAL_RESOLUTION * LCD_BUFFER_HEIGHT;
-constexpr auto LCD_SPI_TRANSFER_SIZE_LIMIT = LCD_BUFFER_SIZE * LV_COLOR_DEPTH / 8;
-
-std::shared_ptr<tt::hal::display::DisplayDevice> createDisplay();

Boards/cyd-2432s024c/Source/devices/SdCard.cpp

@@ -1,28 +0,0 @@
-#include "SdCard.h"
-
-#define TAG "twodotfour_sdcard"
-
-#include <Tactility/hal/sdcard/SpiSdCardDevice.h>
-
-constexpr auto SDCARD_SPI_HOST = SPI3_HOST;
-constexpr auto SDCARD_PIN_CS = GPIO_NUM_5;
-
-using tt::hal::sdcard::SpiSdCardDevice;
-
-std::shared_ptr<SdCardDevice> createSdCard() {
-    auto configuration = std::make_unique<SpiSdCardDevice::Config>(
-        SDCARD_PIN_CS,
-        GPIO_NUM_NC,
-        GPIO_NUM_NC,
-        GPIO_NUM_NC,
-        SdCardDevice::MountBehaviour::AtBoot,
-        std::make_shared<tt::Mutex>(tt::Mutex::Type::Recursive),
-        std::vector<gpio_num_t>(),
-        SDCARD_SPI_HOST
-    );
-
-    return std::make_shared<SpiSdCardDevice>(
-        std::move(configuration)
-    );
-}
-

Boards/cyd-2432s024c/Source/devices/SdCard.h

@@ -1,8 +0,0 @@
-#pragma once
-
-#include "Tactility/hal/sdcard/SdCardDevice.h"
-
-using tt::hal::sdcard::SdCardDevice;
-
-std::shared_ptr<SdCardDevice> createSdCard();
-

Boards/cyd-2432s028r/CMakeLists.txt

@@ -1,7 +0,0 @@
-file(GLOB_RECURSE SOURCE_FILES Source/*.c*)
-
-idf_component_register(
-    SRCS ${SOURCE_FILES}
-    INCLUDE_DIRS "Source"
-    REQUIRES Tactility esp_lvgl_port ILI934x XPT2046SoftSPI PwmBacklight driver vfs fatfs
-)

Boards/cyd-2432s028r/Source/Configuration.cpp

@@ -1,129 +0,0 @@
-#include "devices/Display.h"
-#include "devices/SdCard.h"
-
-#include <Tactility/hal/Configuration.h>
-#include <Tactility/lvgl/LvglSync.h>
-#include <PwmBacklight.h>
-
-using namespace tt::hal;
-
-static bool initBoot() {
-    // Set the RGB LED Pins to output and turn them off
-    ESP_ERROR_CHECK(gpio_set_direction(GPIO_NUM_4, GPIO_MODE_OUTPUT)); // Red
-    ESP_ERROR_CHECK(gpio_set_direction(GPIO_NUM_16, GPIO_MODE_OUTPUT)); // Green
-    ESP_ERROR_CHECK(gpio_set_direction(GPIO_NUM_17, GPIO_MODE_OUTPUT)); // Blue
-
-    // 0 on, 1 off
-    ESP_ERROR_CHECK(gpio_set_level(GPIO_NUM_4, 1)); // Red
-    ESP_ERROR_CHECK(gpio_set_level(GPIO_NUM_16, 1)); // Green
-    ESP_ERROR_CHECK(gpio_set_level(GPIO_NUM_17, 1)); // Blue
-
-    return driver::pwmbacklight::init(LCD_PIN_BACKLIGHT);
-}
-
-static DeviceVector createDevices() {
-    return {
-        createDisplay(),
-        createSdCard()
-    };
-}
-
-extern const Configuration hardwareConfiguration = {
-    .initBoot = initBoot,
-    .createDevices = createDevices,
-    .i2c = {
-        i2c::Configuration {
-            .name = "CN1",
-            .port = I2C_NUM_0,
-            .initMode = i2c::InitMode::ByTactility,
-            .isMutable = true,
-            .config = (i2c_config_t) {
-                .mode = I2C_MODE_MASTER,
-                .sda_io_num = GPIO_NUM_27,
-                .scl_io_num = GPIO_NUM_22,
-                .sda_pullup_en = false,
-                .scl_pullup_en = false,
-                .master = {
-                    .clk_speed = 400000
-                },
-                .clk_flags = 0
-            }
-        }
-    },
-    .spi {
-        // Display
-        spi::Configuration {
-            .device = SPI2_HOST,
-            .dma = SPI_DMA_CH_AUTO,
-            .config = {
-                .mosi_io_num = GPIO_NUM_13,
-                .miso_io_num = GPIO_NUM_12,
-                .sclk_io_num = GPIO_NUM_14,
-                .quadwp_io_num = GPIO_NUM_NC,
-                .quadhd_io_num = GPIO_NUM_NC,
-                .data4_io_num = GPIO_NUM_NC,
-                .data5_io_num = GPIO_NUM_NC,
-                .data6_io_num = GPIO_NUM_NC,
-                .data7_io_num = GPIO_NUM_NC,
-                .data_io_default_level = false,
-                .max_transfer_sz = LCD_SPI_TRANSFER_SIZE_LIMIT,
-                .flags = 0,
-                .isr_cpu_id = ESP_INTR_CPU_AFFINITY_AUTO,
-                .intr_flags = 0
-            },
-            .initMode = spi::InitMode::ByTactility,
-            .isMutable = false,
-            .lock = tt::lvgl::getSyncLock()
-        },
-        // SDCard
-        spi::Configuration {
-            .device = SPI3_HOST,
-            .dma = SPI_DMA_CH_AUTO,
-            .config = {
-                .mosi_io_num = GPIO_NUM_23,
-                .miso_io_num = GPIO_NUM_19,
-                .sclk_io_num = GPIO_NUM_18,
-                .quadwp_io_num = GPIO_NUM_NC,
-                .quadhd_io_num = GPIO_NUM_NC,
-                .data4_io_num = GPIO_NUM_NC,
-                .data5_io_num = GPIO_NUM_NC,
-                .data6_io_num = GPIO_NUM_NC,
-                .data7_io_num = GPIO_NUM_NC,
-                .data_io_default_level = false,
-                .max_transfer_sz = 0,
-                .flags = 0,
-                .isr_cpu_id = ESP_INTR_CPU_AFFINITY_AUTO,
-                .intr_flags = 0
-            },
-            .initMode = spi::InitMode::ByTactility,
-            .isMutable = false,
-            .lock = tt::lvgl::getSyncLock() // esp_lvgl_port owns the lock for the display
-        },
-    },
-
-    .uart {
-        uart::Configuration {
-            .name = "P1",
-            .port = UART_NUM_1,
-            .rxPin = GPIO_NUM_1,
-            .txPin = GPIO_NUM_3,
-            .rtsPin = GPIO_NUM_NC,
-            .ctsPin = GPIO_NUM_NC,
-            .rxBufferSize = 1024,
-            .txBufferSize = 1024,
-            .config = {
-                .baud_rate = 115200,
-                .data_bits = UART_DATA_8_BITS,
-                .parity    = UART_PARITY_DISABLE,
-                .stop_bits = UART_STOP_BITS_1,
-                .flow_ctrl = UART_HW_FLOWCTRL_DISABLE,
-                .rx_flow_ctrl_thresh = 0,
-                .source_clk = UART_SCLK_DEFAULT,
-                .flags = {
-                    .allow_pd = 0,
-                    .backup_before_sleep = 0,
-                }
-            }
-        }
-    }
-};

Boards/cyd-2432s028r/Source/devices/Display.cpp

@@ -1,49 +0,0 @@
-#include "Display.h"
-#include "Xpt2046SoftSpi.h"
-#include <Ili934xDisplay.h>
-#include <PwmBacklight.h>
-
-static std::shared_ptr<tt::hal::touch::TouchDevice> createTouch() {
-    auto configuration = std::make_unique<Xpt2046SoftSpi::Configuration>(
-        TOUCH_MOSI_PIN,
-        TOUCH_MISO_PIN,
-        TOUCH_SCK_PIN,
-        TOUCH_CS_PIN,
-        LCD_HORIZONTAL_RESOLUTION,
-        LCD_VERTICAL_RESOLUTION,
-        false, // swapXY
-        true, // mirrorX
-        false // mirrorY
-    );
-
-    return std::make_shared<Xpt2046SoftSpi>(std::move(configuration));
-}
-
-std::shared_ptr<tt::hal::display::DisplayDevice> createDisplay() {
-    Ili934xDisplay::Configuration panel_configuration = {
-        .horizontalResolution = LCD_HORIZONTAL_RESOLUTION,
-        .verticalResolution = LCD_VERTICAL_RESOLUTION,
-        .gapX = 0,
-        .gapY = 0,
-        .swapXY = false,
-        .mirrorX = true,
-        .mirrorY = false,
-        .invertColor = false,
-        .swapBytes = true,
-        .bufferSize = LCD_BUFFER_SIZE,
-        .touch = createTouch(),
-        .backlightDutyFunction = driver::pwmbacklight::setBacklightDuty,
-        .resetPin = GPIO_NUM_NC,
-        .rgbElementOrder = LCD_RGB_ELEMENT_ORDER_BGR
-    };
-
-    auto spi_configuration = std::make_shared<Ili934xDisplay::SpiConfiguration>(Ili934xDisplay::SpiConfiguration {
-        .spiHostDevice = LCD_SPI_HOST,
-        .csPin = LCD_PIN_CS,
-        .dcPin = LCD_PIN_DC,
-        .pixelClockFrequency = 40'000'000,
-        .transactionQueueDepth = 10
-    });
-
-    return std::make_shared<Ili934xDisplay>(panel_configuration, spi_configuration, true);
-}

Boards/cyd-2432s028r/Source/devices/Display.h

@@ -1,28 +0,0 @@
-#pragma once
-
-#include <Tactility/hal/display/DisplayDevice.h>
-#include <driver/gpio.h>
-#include <driver/spi_common.h>
-#include <memory>
-
-// Display
-constexpr auto LCD_SPI_HOST = SPI2_HOST;
-constexpr auto LCD_PIN_CS = GPIO_NUM_15;
-constexpr auto LCD_PIN_DC = GPIO_NUM_2;
-constexpr auto LCD_HORIZONTAL_RESOLUTION = 240;
-constexpr auto LCD_VERTICAL_RESOLUTION = 320;
-constexpr auto LCD_BUFFER_HEIGHT = LCD_VERTICAL_RESOLUTION / 10;
-constexpr auto LCD_BUFFER_SIZE = LCD_HORIZONTAL_RESOLUTION * LCD_BUFFER_HEIGHT;
-constexpr auto LCD_SPI_TRANSFER_SIZE_LIMIT = LCD_BUFFER_SIZE * LV_COLOR_DEPTH / 8;
-
-// Display backlight (PWM)
-constexpr auto LCD_PIN_BACKLIGHT = GPIO_NUM_21;
-
-// Touch (Software SPI)
-constexpr auto TOUCH_MISO_PIN = GPIO_NUM_39;
-constexpr auto TOUCH_MOSI_PIN = GPIO_NUM_32;
-constexpr auto TOUCH_SCK_PIN = GPIO_NUM_25;
-constexpr auto TOUCH_CS_PIN = GPIO_NUM_33;
-constexpr auto TOUCH_IRQ_PIN = GPIO_NUM_36;
-
-std::shared_ptr<tt::hal::display::DisplayDevice> createDisplay();

Boards/cyd-2432s028r/Source/devices/SdCard.cpp

@@ -1,21 +0,0 @@
-#include "SdCard.h"
-#include <Tactility/hal/sdcard/SpiSdCardDevice.h>
-#include <Tactility/lvgl/LvglSync.h>
-
-using tt::hal::sdcard::SpiSdCardDevice;
-
-std::shared_ptr<SdCardDevice> createSdCard() {
-    auto config = std::make_unique<SpiSdCardDevice::Config>(
-        GPIO_NUM_5,
-        GPIO_NUM_NC,
-        GPIO_NUM_NC,
-        GPIO_NUM_NC,
-        SdCardDevice::MountBehaviour::AtBoot,
-        std::make_shared<tt::Mutex>(tt::Mutex::Type::Recursive),
-        std::vector<gpio_num_t>(),
-        SPI3_HOST
-    );
-
-    return std::make_shared<SpiSdCardDevice>(std::move(config));
-}
-

Boards/cyd-2432s028r/Source/devices/SdCard.h

@@ -1,8 +0,0 @@
-#pragma once
-
-#include "Tactility/hal/sdcard/SdCardDevice.h"
-
-using tt::hal::sdcard::SdCardDevice;
-
-std::shared_ptr<SdCardDevice> createSdCard();
-

Boards/cyd-2432s028rv3/CMakeLists.txt

@@ -1,7 +0,0 @@
-file(GLOB_RECURSE SOURCE_FILES Source/*.c*)
-
-idf_component_register(
-    SRCS ${SOURCE_FILES}
-    INCLUDE_DIRS "Source"
-    REQUIRES Tactility esp_lvgl_port ST7789 XPT2046SoftSPI PwmBacklight driver vfs fatfs
-)

Boards/cyd-2432s028rv3/Source/Configuration.cpp

@@ -1,129 +0,0 @@
-#include "devices/Display.h"
-#include "devices/SdCard.h"
-
-#include <Tactility/hal/Configuration.h>
-#include <Tactility/lvgl/LvglSync.h>
-#include <PwmBacklight.h>
-
-using namespace tt::hal;
-
-static bool initBoot() {
-    // Set the RGB LED Pins to output and turn them off
-    ESP_ERROR_CHECK(gpio_set_direction(GPIO_NUM_4, GPIO_MODE_OUTPUT)); // Red
-    ESP_ERROR_CHECK(gpio_set_direction(GPIO_NUM_16, GPIO_MODE_OUTPUT)); // Green
-    ESP_ERROR_CHECK(gpio_set_direction(GPIO_NUM_17, GPIO_MODE_OUTPUT)); // Blue
-
-    // 0 on, 1 off
-    ESP_ERROR_CHECK(gpio_set_level(GPIO_NUM_4, 1)); // Red
-    ESP_ERROR_CHECK(gpio_set_level(GPIO_NUM_16, 1)); // Green
-    ESP_ERROR_CHECK(gpio_set_level(GPIO_NUM_17, 1)); // Blue
-
-    return driver::pwmbacklight::init(LCD_PIN_BACKLIGHT);
-}
-
-static DeviceVector createDevices() {
-    return {
-        createDisplay(),
-        createSdCard()
-    };
-}
-
-extern const Configuration hardwareConfiguration = {
-    .initBoot = initBoot,
-    .createDevices = createDevices,
-    .i2c = {
-        i2c::Configuration {
-            .name = "CN1",
-            .port = I2C_NUM_0,
-            .initMode = i2c::InitMode::ByTactility,
-            .isMutable = true,
-            .config = (i2c_config_t) {
-                .mode = I2C_MODE_MASTER,
-                .sda_io_num = GPIO_NUM_27,
-                .scl_io_num = GPIO_NUM_22,
-                .sda_pullup_en = false,
-                .scl_pullup_en = false,
-                .master = {
-                    .clk_speed = 400000
-                },
-                .clk_flags = 0
-            }
-        }
-    },
-    .spi {
-        // Display
-        spi::Configuration {
-            .device = SPI2_HOST,
-            .dma = SPI_DMA_CH_AUTO,
-            .config = {
-                .mosi_io_num = GPIO_NUM_13,
-                .miso_io_num = GPIO_NUM_12,
-                .sclk_io_num = GPIO_NUM_14,
-                .quadwp_io_num = GPIO_NUM_NC,
-                .quadhd_io_num = GPIO_NUM_NC,
-                .data4_io_num = GPIO_NUM_NC,
-                .data5_io_num = GPIO_NUM_NC,
-                .data6_io_num = GPIO_NUM_NC,
-                .data7_io_num = GPIO_NUM_NC,
-                .data_io_default_level = false,
-                .max_transfer_sz = LCD_SPI_TRANSFER_SIZE_LIMIT,
-                .flags = 0,
-                .isr_cpu_id = ESP_INTR_CPU_AFFINITY_AUTO,
-                .intr_flags = 0
-            },
-            .initMode = spi::InitMode::ByTactility,
-            .isMutable = false,
-            .lock = tt::lvgl::getSyncLock()
-        },
-        // SDCard
-        spi::Configuration {
-            .device = SPI3_HOST,
-            .dma = SPI_DMA_CH_AUTO,
-            .config = {
-                .mosi_io_num = GPIO_NUM_23,
-                .miso_io_num = GPIO_NUM_19,
-                .sclk_io_num = GPIO_NUM_18,
-                .quadwp_io_num = GPIO_NUM_NC,
-                .quadhd_io_num = GPIO_NUM_NC,
-                .data4_io_num = GPIO_NUM_NC,
-                .data5_io_num = GPIO_NUM_NC,
-                .data6_io_num = GPIO_NUM_NC,
-                .data7_io_num = GPIO_NUM_NC,
-                .data_io_default_level = false,
-                .max_transfer_sz = 0,
-                .flags = 0,
-                .isr_cpu_id = ESP_INTR_CPU_AFFINITY_AUTO,
-                .intr_flags = 0
-            },
-            .initMode = spi::InitMode::ByTactility,
-            .isMutable = false,
-            .lock = tt::lvgl::getSyncLock() // esp_lvgl_port owns the lock for the display
-        },
-    },
-
-    .uart {
-        uart::Configuration {
-            .name = "P1",
-            .port = UART_NUM_1,
-            .rxPin = GPIO_NUM_1,
-            .txPin = GPIO_NUM_3,
-            .rtsPin = GPIO_NUM_NC,
-            .ctsPin = GPIO_NUM_NC,
-            .rxBufferSize = 1024,
-            .txBufferSize = 1024,
-            .config = {
-                .baud_rate = 115200,
-                .data_bits = UART_DATA_8_BITS,
-                .parity    = UART_PARITY_DISABLE,
-                .stop_bits = UART_STOP_BITS_1,
-                .flow_ctrl = UART_HW_FLOWCTRL_DISABLE,
-                .rx_flow_ctrl_thresh = 0,
-                .source_clk = UART_SCLK_DEFAULT,
-                .flags = {
-                    .allow_pd = 0,
-                    .backup_before_sleep = 0,
-                }
-            }
-        }
-    }
-};

Boards/cyd-2432s028rv3/Source/devices/Display.cpp

@@ -1,49 +0,0 @@
-#include "Display.h"
-#include "Xpt2046SoftSpi.h"
-#include <St7789Display.h>
-#include <PwmBacklight.h>
-
-constexpr auto* TAG = "CYD";
-
-static std::shared_ptr<tt::hal::touch::TouchDevice> createTouch() {
-    auto configuration = std::make_unique<Xpt2046SoftSpi::Configuration>(
-        TOUCH_MOSI_PIN,
-        TOUCH_MISO_PIN,
-        TOUCH_SCK_PIN,
-        TOUCH_CS_PIN,
-        LCD_HORIZONTAL_RESOLUTION,
-        LCD_VERTICAL_RESOLUTION,
-        false, // swapXY
-        true, // mirrorX
-        false // mirrorY
-    );
-
-    return std::make_shared<Xpt2046SoftSpi>(std::move(configuration));
-}
-
-std::shared_ptr<tt::hal::display::DisplayDevice> createDisplay() {
-    St7789Display::Configuration panel_configuration = {
-        .horizontalResolution = LCD_HORIZONTAL_RESOLUTION,
-        .verticalResolution = LCD_VERTICAL_RESOLUTION,
-        .gapX = 0,
-        .gapY = 0,
-        .swapXY = false,
-        .mirrorX = false,
-        .mirrorY = false,
-        .invertColor = false,
-        .bufferSize = LCD_BUFFER_SIZE,
-        .touch = createTouch(),
-        .backlightDutyFunction = driver::pwmbacklight::setBacklightDuty,
-        .resetPin = GPIO_NUM_NC
-    };
-
-    auto spi_configuration = std::make_shared<St7789Display::SpiConfiguration>(St7789Display::SpiConfiguration {
-        .spiHostDevice = LCD_SPI_HOST,
-        .csPin = LCD_PIN_CS,
-        .dcPin = LCD_PIN_DC,
-        .pixelClockFrequency = 62'500'000,
-        .transactionQueueDepth = 10
-    });
-
-    return std::make_shared<St7789Display>(panel_configuration, spi_configuration);
-}

Boards/cyd-2432s028rv3/Source/devices/Display.h

@@ -1,28 +0,0 @@
-#pragma once
-
-#include <Tactility/hal/display/DisplayDevice.h>
-
-#include <driver/gpio.h>
-#include <driver/spi_common.h>
-
-#include <memory>
-
-// Display
-constexpr auto LCD_SPI_HOST = SPI2_HOST;
-constexpr auto LCD_PIN_CS = GPIO_NUM_15;
-constexpr auto LCD_PIN_DC = GPIO_NUM_2;
-constexpr auto LCD_PIN_BACKLIGHT = GPIO_NUM_21;
-constexpr auto LCD_HORIZONTAL_RESOLUTION = 240;
-constexpr auto LCD_VERTICAL_RESOLUTION = 320;
-constexpr auto LCD_BUFFER_HEIGHT = LCD_VERTICAL_RESOLUTION / 10;
-constexpr auto LCD_BUFFER_SIZE = LCD_HORIZONTAL_RESOLUTION * LCD_BUFFER_HEIGHT;
-constexpr auto LCD_SPI_TRANSFER_SIZE_LIMIT = LCD_BUFFER_SIZE * LV_COLOR_DEPTH / 8;
-
-// Touch (Software SPI)
-constexpr auto TOUCH_MISO_PIN = GPIO_NUM_39;
-constexpr auto TOUCH_MOSI_PIN = GPIO_NUM_32;
-constexpr auto TOUCH_SCK_PIN = GPIO_NUM_25;
-constexpr auto TOUCH_CS_PIN = GPIO_NUM_33;
-constexpr auto TOUCH_IRQ_PIN = GPIO_NUM_36;
-
-std::shared_ptr<tt::hal::display::DisplayDevice> createDisplay();

Boards/cyd-2432s028rv3/Source/devices/SdCard.cpp

@@ -1,21 +0,0 @@
-#include "SdCard.h"
-#include <Tactility/hal/sdcard/SpiSdCardDevice.h>
-#include <Tactility/lvgl/LvglSync.h>
-
-using tt::hal::sdcard::SpiSdCardDevice;
-
-std::shared_ptr<SdCardDevice> createSdCard() {
-    auto config = std::make_unique<SpiSdCardDevice::Config>(
-        GPIO_NUM_5,
-        GPIO_NUM_NC,
-        GPIO_NUM_NC,
-        GPIO_NUM_NC,
-        SdCardDevice::MountBehaviour::AtBoot,
-        std::make_shared<tt::Mutex>(tt::Mutex::Type::Recursive),
-        std::vector<gpio_num_t>(),
-        SPI3_HOST
-    );
-
-    return std::make_shared<SpiSdCardDevice>(std::move(config));
-}
-

Boards/cyd-2432s028rv3/Source/devices/SdCard.h

@@ -1,8 +0,0 @@
-#pragma once
-
-#include "Tactility/hal/sdcard/SdCardDevice.h"
-
-using tt::hal::sdcard::SdCardDevice;
-
-std::shared_ptr<SdCardDevice> createSdCard();
-

Boards/cyd-2432s032c/CMakeLists.txt

@@ -1,7 +0,0 @@
-file(GLOB_RECURSE SOURCE_FILES Source/*.c*)
-
-idf_component_register(
-    SRCS ${SOURCE_FILES}
-    INCLUDE_DIRS "Source"
-    REQUIRES Tactility esp_lvgl_port ILI934x GT911 PwmBacklight driver vfs fatfs
-)

Boards/cyd-2432s032c/Source/Configuration.cpp

@@ -1,117 +0,0 @@
-#include "devices/Display.h"
-#include "devices/SdCard.h"
-
-#include <Tactility/hal/Configuration.h>
-#include <Tactility/kernel/SystemEvents.h>
-#include <Tactility/lvgl/LvglSync.h>
-
-#include <PwmBacklight.h>
-
-bool initBoot() {
-    if (!driver::pwmbacklight::init(LCD_PIN_BACKLIGHT)) {
-        return false;
-    }
-
-    // Set the RGB LED Pins to output and turn them off
-    ESP_ERROR_CHECK(gpio_set_direction(GPIO_NUM_4, GPIO_MODE_OUTPUT)); // Red
-    ESP_ERROR_CHECK(gpio_set_direction(GPIO_NUM_16, GPIO_MODE_OUTPUT)); // Green
-    ESP_ERROR_CHECK(gpio_set_direction(GPIO_NUM_17, GPIO_MODE_OUTPUT)); // Blue
-
-    // 0 on, 1 off
-    ESP_ERROR_CHECK(gpio_set_level(GPIO_NUM_4, 1)); // Red
-    ESP_ERROR_CHECK(gpio_set_level(GPIO_NUM_16, 1)); // Green
-    ESP_ERROR_CHECK(gpio_set_level(GPIO_NUM_17, 1)); // Blue
-
-    // This display has a weird glitch with gamma during boot, which results in uneven dark gray colours.
-    // Setting gamma curve index to 0 doesn't work at boot for an unknown reason, so we set the curve index to 1:
-    tt::kernel::subscribeSystemEvent(tt::kernel::SystemEvent::BootSplash, [](auto) {
-        auto display = tt::hal::findFirstDevice<tt::hal::display::DisplayDevice>(tt::hal::Device::Type::Display);
-        assert(display != nullptr);
-        tt::lvgl::lock(portMAX_DELAY);
-        display->setGammaCurve(1U);
-        tt::lvgl::unlock();
-    });
-
-    return true;
-}
-
-static tt::hal::DeviceVector createDevices() {
-    return {
-        createDisplay(),
-        createSdCard()
-    };
-}
-
-extern const tt::hal::Configuration hardwareConfiguration = {
-    .initBoot = initBoot,
-    .createDevices = createDevices,
-    .i2c = {
-        tt::hal::i2c::Configuration {
-            .name = "Internal",
-            .port = I2C_NUM_0,
-            .initMode = tt::hal::i2c::InitMode::ByTactility,
-            .isMutable = true,
-            .config = (i2c_config_t) {
-                .mode = I2C_MODE_MASTER,
-                .sda_io_num = GPIO_NUM_33,
-                .scl_io_num = GPIO_NUM_32,
-                .sda_pullup_en = false,
-                .scl_pullup_en = false,
-                .master = {
-                    .clk_speed = 400000
-                },
-                .clk_flags = 0
-            }
-        }
-    },
-    .spi {
-        // Display
-        tt::hal::spi::Configuration {
-            .device = SPI2_HOST,
-            .dma = SPI_DMA_CH_AUTO,
-            .config = {
-                .mosi_io_num = GPIO_NUM_13,
-                .miso_io_num = GPIO_NUM_NC,
-                .sclk_io_num = GPIO_NUM_14,
-                .quadwp_io_num = GPIO_NUM_NC,
-                .quadhd_io_num = GPIO_NUM_NC,
-                .data4_io_num = GPIO_NUM_NC,
-                .data5_io_num = GPIO_NUM_NC,
-                .data6_io_num = GPIO_NUM_NC,
-                .data7_io_num = GPIO_NUM_NC,
-                .data_io_default_level = false,
-                .max_transfer_sz = LCD_SPI_TRANSFER_SIZE_LIMIT,
-                .flags = 0,
-                .isr_cpu_id = ESP_INTR_CPU_AFFINITY_AUTO,
-                .intr_flags = 0
-            },
-            .initMode = tt::hal::spi::InitMode::ByTactility,
-            .isMutable = false,
-            .lock = tt::lvgl::getSyncLock() // esp_lvgl_port owns the lock for the display
-        },
-        // SD card
-        tt::hal::spi::Configuration {
-            .device = SPI3_HOST,
-            .dma = SPI_DMA_CH_AUTO,
-            .config = {
-                .mosi_io_num = GPIO_NUM_23,
-                .miso_io_num = GPIO_NUM_19,
-                .sclk_io_num = GPIO_NUM_18,
-                .quadwp_io_num = GPIO_NUM_NC,
-                .quadhd_io_num = GPIO_NUM_NC,
-                .data4_io_num = GPIO_NUM_NC,
-                .data5_io_num = GPIO_NUM_NC,
-                .data6_io_num = GPIO_NUM_NC,
-                .data7_io_num = GPIO_NUM_NC,
-                .data_io_default_level = false,
-                .max_transfer_sz = 0,
-                .flags = 0,
-                .isr_cpu_id = ESP_INTR_CPU_AFFINITY_AUTO,
-                .intr_flags = 0
-            },
-            .initMode = tt::hal::spi::InitMode::ByTactility,
-            .isMutable = false,
-            .lock = nullptr
-        },
-    }
-};

Boards/cyd-2432s032c/Source/devices/Display.cpp

@@ -1,44 +0,0 @@
-#include "Display.h"
-
-#include <Gt911Touch.h>
-#include <Ili934xDisplay.h>
-#include <PwmBacklight.h>
-
-static std::shared_ptr<tt::hal::touch::TouchDevice> createTouch() {
-    auto configuration = std::make_unique<Gt911Touch::Configuration>(
-        I2C_NUM_0,
-        LCD_HORIZONTAL_RESOLUTION,
-        LCD_VERTICAL_RESOLUTION
-    );
-
-    return std::make_shared<Gt911Touch>(std::move(configuration));
-}
-
-std::shared_ptr<tt::hal::display::DisplayDevice> createDisplay() {
-    Ili934xDisplay::Configuration panel_configuration = {
-        .horizontalResolution = LCD_HORIZONTAL_RESOLUTION,
-        .verticalResolution = LCD_VERTICAL_RESOLUTION,
-        .gapX = 0,
-        .gapY = 0,
-        .swapXY = true,
-        .mirrorX = true,
-        .mirrorY = true,
-        .invertColor = true,
-        .swapBytes = true,
-        .bufferSize = LCD_BUFFER_SIZE,
-        .touch = createTouch(),
-        .backlightDutyFunction = driver::pwmbacklight::setBacklightDuty,
-        .resetPin = GPIO_NUM_NC,
-        .rgbElementOrder = LCD_RGB_ELEMENT_ORDER_RGB
-    };
-
-    auto spi_configuration = std::make_shared<Ili934xDisplay::SpiConfiguration>(Ili934xDisplay::SpiConfiguration {
-        .spiHostDevice = LCD_SPI_HOST,
-        .csPin = LCD_PIN_CS,
-        .dcPin = LCD_PIN_DC,
-        .pixelClockFrequency = 40'000'000,
-        .transactionQueueDepth = 10
-    });
-
-    return std::make_shared<Ili934xDisplay>(panel_configuration, spi_configuration, true);
-}

Boards/cyd-2432s032c/Source/devices/Display.h

@@ -1,19 +0,0 @@
-#pragma once
-
-#include <Tactility/hal/display/DisplayDevice.h>
-#include <driver/gpio.h>
-#include <driver/spi_common.h>
-#include <memory>
-
-// Display
-constexpr auto LCD_SPI_HOST = SPI2_HOST;
-constexpr auto LCD_PIN_CS = GPIO_NUM_15;
-constexpr auto LCD_PIN_DC = GPIO_NUM_2;
-constexpr auto LCD_PIN_BACKLIGHT = GPIO_NUM_27;
-constexpr auto LCD_HORIZONTAL_RESOLUTION = 240;
-constexpr auto LCD_VERTICAL_RESOLUTION = 320;
-constexpr auto LCD_BUFFER_HEIGHT = LCD_VERTICAL_RESOLUTION / 10;
-constexpr auto LCD_BUFFER_SIZE = LCD_HORIZONTAL_RESOLUTION * LCD_BUFFER_HEIGHT;
-constexpr auto LCD_SPI_TRANSFER_SIZE_LIMIT = LCD_BUFFER_SIZE * LV_COLOR_DEPTH / 8;
-
-std::shared_ptr<tt::hal::display::DisplayDevice> createDisplay();

Boards/cyd-2432s032c/Source/devices/SdCard.cpp

@@ -1,27 +0,0 @@
-#include "SdCard.h"
-
-#include <Tactility/hal/sdcard/SpiSdCardDevice.h>
-#include <Tactility/lvgl/LvglSync.h>
-
-constexpr auto SDCARD_SPI_HOST = SPI3_HOST;
-constexpr auto SDCARD_PIN_CS = GPIO_NUM_5;
-
-using tt::hal::sdcard::SpiSdCardDevice;
-
-std::shared_ptr<SdCardDevice> createSdCard() {
-    auto configuration = std::make_unique<SpiSdCardDevice::Config>(
-        SDCARD_PIN_CS,
-        GPIO_NUM_NC,
-        GPIO_NUM_NC,
-        GPIO_NUM_NC,
-        SdCardDevice::MountBehaviour::AtBoot,
-        std::make_shared<tt::Mutex>(tt::Mutex::Type::Recursive),
-        std::vector<gpio_num_t>(),
-        SDCARD_SPI_HOST
-    );
-
-    return std::make_shared<SpiSdCardDevice>(
-        std::move(configuration)
-    );
-}
-

Boards/cyd-2432s032c/Source/devices/SdCard.h

@@ -1,8 +0,0 @@
-#pragma once
-
-#include <Tactility/hal/sdcard/SdCardDevice.h>
-
-using tt::hal::sdcard::SdCardDevice;
-
-std::shared_ptr<SdCardDevice> createSdCard();
-

Boards/cyd-4848s040c/CMakeLists.txt

@@ -1,7 +0,0 @@
-file(GLOB_RECURSE SOURCE_FILES Source/*.c*)
-
-idf_component_register(
-    SRCS ${SOURCE_FILES}
-    INCLUDE_DIRS "Source"
-    REQUIRES Tactility EspLcdCompat esp_lcd_st7701 esp_lcd_panel_io_additions GT911 PwmBacklight driver vfs fatfs
-)

Boards/cyd-4848s040c/Source/Configuration.cpp

@@ -1,89 +0,0 @@
-#include "devices/St7701Display.h"
-#include "devices/SdCard.h"
-
-#include <Tactility/hal/Configuration.h>
-#include <Tactility/kernel/SystemEvents.h>
-#include <Tactility/lvgl/LvglSync.h>
-#include <PwmBacklight.h>
-
-using namespace tt::hal;
-
-static bool initBoot() {
-    return driver::pwmbacklight::init(GPIO_NUM_38, 1000);
-}
-
-static DeviceVector createDevices() {
-    return {
-        std::make_shared<St7701Display>(),
-        createSdCard()
-    };
-}
-
-extern const Configuration hardwareConfiguration = {
-    .initBoot = initBoot,
-    .createDevices = createDevices,
-    .i2c = {
-        //Touch
-        i2c::Configuration {
-            .name = "Internal",
-            .port = I2C_NUM_0,
-            .initMode = i2c::InitMode::ByTactility,
-            .isMutable = true,
-            .config = (i2c_config_t) {
-                .mode = I2C_MODE_MASTER,
-                .sda_io_num = GPIO_NUM_19,
-                .scl_io_num = GPIO_NUM_45,
-                .sda_pullup_en = true,
-                .scl_pullup_en = true,
-                .master = {
-                    .clk_speed = 400000
-                },
-                .clk_flags = 0
-            }
-        },
-        //H1 header, 
-        i2c::Configuration {
-            .name = "External",
-            .port = I2C_NUM_1,
-            .initMode = i2c::InitMode::Disabled,
-            .isMutable = true,
-            .config = (i2c_config_t) {
-                .mode = I2C_MODE_MASTER,
-                .sda_io_num = GPIO_NUM_NC,
-                .scl_io_num = GPIO_NUM_NC,
-                .sda_pullup_en = false,
-                .scl_pullup_en = false,
-                .master = {
-                    .clk_speed = 400000
-                },
-                .clk_flags = 0
-            }
-        }
-    },
-    .spi {
-        // SD Card & display init
-        spi::Configuration {
-            .device = SPI2_HOST,
-            .dma = SPI_DMA_CH_AUTO,
-            .config = {
-                .mosi_io_num = GPIO_NUM_47,
-                .miso_io_num = GPIO_NUM_41,
-                .sclk_io_num = GPIO_NUM_48,
-                .quadwp_io_num = -1,
-                .quadhd_io_num = GPIO_NUM_42,
-                .data4_io_num = -1,
-                .data5_io_num = -1,
-                .data6_io_num = -1,
-                .data7_io_num = -1,
-                .data_io_default_level = false,
-                .max_transfer_sz = 1024 * 128,
-                .flags = 0,
-                .isr_cpu_id = ESP_INTR_CPU_AFFINITY_AUTO,
-                .intr_flags = 0
-            },
-            .initMode = spi::InitMode::ByTactility,
-            .isMutable = false,
-            .lock = tt::lvgl::getSyncLock()
-        }
-    }
-};

Boards/cyd-4848s040c/Source/devices/SdCard.cpp

@@ -1,25 +0,0 @@
-#include "SdCard.h"
-
-#include <Tactility/hal/sdcard/SpiSdCardDevice.h>
-#include <Tactility/lvgl/LvglSync.h>
-
-using tt::hal::sdcard::SpiSdCardDevice;
-
-std::shared_ptr<SdCardDevice> createSdCard() {
-    auto config = std::make_unique<SpiSdCardDevice::Config>(
-        GPIO_NUM_42,
-        GPIO_NUM_NC,
-        GPIO_NUM_NC,
-        GPIO_NUM_NC,
-        SdCardDevice::MountBehaviour::AtBoot,
-        tt::lvgl::getSyncLock(),
-        std::vector { GPIO_NUM_39 }
-    );
-
-    auto sdcard = std::make_shared<SpiSdCardDevice>(
-        std::move(config)
-    );
-
-    return std::static_pointer_cast<SdCardDevice>(sdcard);
-}
-

Boards/cyd-4848s040c/Source/devices/SdCard.h

@@ -1,8 +0,0 @@
-#pragma once
-
-#include "Tactility/hal/sdcard/SdCardDevice.h"
-
-using tt::hal::sdcard::SdCardDevice;
-
-std::shared_ptr<SdCardDevice> createSdCard();
-

Boards/cyd-4848s040c/Source/devices/St7701Display.cpp

@@ -1,236 +0,0 @@
-#include "St7701Display.h"
-
-#include <Gt911Touch.h>
-#include <PwmBacklight.h>
-#include <Tactility/Log.h>
-
-#include <driver/gpio.h>
-#include <esp_err.h>
-#include <esp_lcd_panel_rgb.h>
-#include <esp_lcd_panel_ops.h>
-#include <esp_lcd_panel_io_additions.h>
-#include <esp_lcd_st7701.h>
-
-constexpr auto TAG = "St7701Display";
-
-static const st7701_lcd_init_cmd_t st7701_lcd_init_cmds[] = {
-    //  {cmd, { data }, data_size, delay_ms}
-    {0xFF, (uint8_t[]) {0x77, 0x01, 0x00, 0x00, 0x10}, 5, 0},
-    {0xC0, (uint8_t[]) {0x3B, 0x00}, 2, 0},
-    {0xC1, (uint8_t[]) {0x0D, 0x02}, 2, 0},
-    {0xC2, (uint8_t[]) {0x31, 0x05}, 2, 0},
-    {0xCD, (uint8_t[]) {0x00}, 1, 0}, //0x08
-    //Positive Voltage Gamma Control
-    {0xB0, (uint8_t[]) {0x00, 0x11, 0x18, 0x0E, 0x11, 0x06, 0x07, 0x08, 0x07, 0x22, 0x04, 0x12, 0x0F, 0xAA, 0x31, 0x18}, 16, 0},
-    //Negative Voltage Gamma Control
-    {0xB1, (uint8_t[]) {0x00, 0x11, 0x19, 0x0E, 0x12, 0x07, 0x08, 0x08, 0x08, 0x22, 0x04, 0x11, 0x11, 0xA9, 0x32, 0x18}, 16, 0},
-    //Page1
-    {0xFF, (uint8_t[]) {0x77, 0x01, 0x00, 0x00, 0x11}, 5, 0},
-    {0xB0, (uint8_t[]) {0x60}, 1, 0}, //Vop=4.7375v
-    {0xB1, (uint8_t[]) {0x32}, 1, 0}, //VCOM=32
-    {0xB2, (uint8_t[]) {0x07}, 1, 0}, //VGH=15v
-    {0xB3, (uint8_t[]) {0x80}, 1, 0},
-    {0xB5, (uint8_t[]) {0x49}, 1, 0}, //VGL=-10.17v
-    {0xB7, (uint8_t[]) {0x85}, 1, 0},
-    {0xB8, (uint8_t[]) {0x21}, 1, 0}, //AVDD=6.6 & AVCL=-4.6
-    {0xC1, (uint8_t[]) {0x78}, 1, 0},
-    {0xC2, (uint8_t[]) {0x78}, 1, 0},
-    {0xE0, (uint8_t[]) {0x00, 0x1B, 0x02}, 3, 0},
-    {0xE1, (uint8_t[]) {0x08, 0xA0, 0x00, 0x00, 0x07, 0xA0, 0x00, 0x00, 0x00, 0x44, 0x44}, 11, 0},
-    {0xE2, (uint8_t[]) {0x11, 0x11, 0x44, 0x44, 0xED, 0xA0, 0x00, 0x00, 0xEC, 0xA0, 0x00, 0x00}, 12, 0},
-    {0xE3, (uint8_t[]) {0x00, 0x00, 0x11, 0x11}, 4, 0},
-    {0xE4, (uint8_t[]) {0x44, 0x44}, 2, 0},
-    {0xE5, (uint8_t[]) {0x0A, 0xE9, 0xD8, 0xA0, 0x0C, 0xEB, 0xD8, 0xA0, 0x0E, 0xED, 0xD8, 0xA0, 0x10, 0xEF, 0xD8, 0xA0}, 16, 0},
-    {0xE6, (uint8_t[]) {0x00, 0x00, 0x11, 0x11}, 4, 0},
-    {0xE7, (uint8_t[]) {0x44, 0x44}, 2, 0},
-    {0xE8, (uint8_t[]) {0x09, 0xE8, 0xD8, 0xA0, 0x0B, 0xEA, 0xD8, 0xA0, 0x0D, 0xEC, 0xD8, 0xA0, 0x0F, 0xEE, 0xD8, 0xA0}, 16, 0},
-    {0xEB, (uint8_t[]) {0x02, 0x00, 0xE4, 0xE4, 0x88, 0x00, 0x40}, 7, 0},
-    {0xEC, (uint8_t[]) {0x3C, 0x00}, 2, 0},
-    {0xED, (uint8_t[]) {0xAB, 0x89, 0x76, 0x54, 0x02, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0x20, 0x45, 0x67, 0x98, 0xBA}, 16, 0},
-    //VAP & VAN
-    {0xFF, (uint8_t[]) {0x77, 0x01, 0x00, 0x00, 0x13}, 5, 0},
-    {0xE5, (uint8_t[]) {0xE4}, 1, 0},
-    {0xFF, (uint8_t[]) {0x77, 0x01, 0x00, 0x00, 0x00}, 5, 0},
-    {0x3A, (uint8_t[]) {0x60}, 1, 10}, //0x70 RGB888, 0x60 RGB666, 0x50 RGB565
-    {0x11, (uint8_t[]) {0x00}, 0, 120}, //Sleep Out
-    {0x29, (uint8_t[]) {0x00}, 0, 0}, //Display On
-};
-
-bool St7701Display::createIoHandle(esp_lcd_panel_io_handle_t& outHandle) {
-    spi_line_config_t line_config = {
-        .cs_io_type = IO_TYPE_GPIO,
-        .cs_gpio_num = GPIO_NUM_39,
-        .scl_io_type = IO_TYPE_GPIO,
-        .scl_gpio_num = GPIO_NUM_48,
-        .sda_io_type = IO_TYPE_GPIO,
-        .sda_gpio_num = GPIO_NUM_47,
-        .io_expander = nullptr,
-    };
-    esp_lcd_panel_io_3wire_spi_config_t panel_io_config = ST7701_PANEL_IO_3WIRE_SPI_CONFIG(line_config, 0);
-    return esp_lcd_new_panel_io_3wire_spi(&panel_io_config, &outHandle) == ESP_OK;
-}
-
-bool St7701Display::createPanelHandle(esp_lcd_panel_io_handle_t ioHandle, esp_lcd_panel_handle_t& panelHandle) {
-    const esp_lcd_rgb_panel_config_t rgb_config = {
-        .clk_src = LCD_CLK_SRC_DEFAULT,
-        .timings = {
-            .pclk_hz = 14000000,
-            .h_res = 480,
-            .v_res = 480,
-            .hsync_pulse_width = 10,
-            .hsync_back_porch = 10,
-            .hsync_front_porch = 20,
-            .vsync_pulse_width = 10,
-            .vsync_back_porch = 10,
-            .vsync_front_porch = 10,
-            .flags = {
-                .hsync_idle_low = false,
-                .vsync_idle_low = false,
-                .de_idle_high = false,
-                .pclk_active_neg = false,
-                .pclk_idle_high = false
-            }
-        },
-        .data_width = 16,
-        .bits_per_pixel = 16,
-        .num_fbs = 2,
-        .bounce_buffer_size_px = 480 * 10,
-        .sram_trans_align = 8,
-        .psram_trans_align = 64,
-        .hsync_gpio_num = GPIO_NUM_16,
-        .vsync_gpio_num = GPIO_NUM_17,
-        .de_gpio_num = GPIO_NUM_18,
-        .pclk_gpio_num = GPIO_NUM_21,
-        .disp_gpio_num = GPIO_NUM_NC,
-        .data_gpio_nums = {
-            GPIO_NUM_4, // B1
-            GPIO_NUM_5, // B2
-            GPIO_NUM_6, // B3
-            GPIO_NUM_7, // B4
-            GPIO_NUM_15, // B5
-            GPIO_NUM_8, // G1
-            GPIO_NUM_20, // G2
-            GPIO_NUM_3, // G3
-            GPIO_NUM_46, // G4
-            GPIO_NUM_9, // G5
-            GPIO_NUM_10, // G6
-            GPIO_NUM_11, // R1
-            GPIO_NUM_12, // R2
-            GPIO_NUM_13, // R3
-            GPIO_NUM_14, // R4
-            GPIO_NUM_0 // R5
-        },
-        .flags = {
-            .disp_active_low = false,
-            .refresh_on_demand = false,
-            .fb_in_psram = true,
-            .double_fb = true,
-            .no_fb = false,
-            .bb_invalidate_cache = true
-        }
-    };
-
-    st7701_vendor_config_t vendor_config = {
-        .init_cmds = st7701_lcd_init_cmds,
-        .init_cmds_size = sizeof(st7701_lcd_init_cmds) / sizeof(st7701_lcd_init_cmd_t),
-        .rgb_config = &rgb_config,
-        .flags = {
-            .use_mipi_interface = 0,
-            .mirror_by_cmd = 1,
-            .auto_del_panel_io = 0,
-        },
-    };
-
-    const esp_lcd_panel_dev_config_t panel_config = {
-        .reset_gpio_num = GPIO_NUM_NC,
-        .rgb_ele_order = LCD_RGB_ELEMENT_ORDER_RGB,
-        .data_endian = LCD_RGB_DATA_ENDIAN_LITTLE,
-        .bits_per_pixel = 16,
-        .flags = {
-            .reset_active_high = false,
-        },
-        .vendor_config = &vendor_config,
-    };
-
-    if (esp_lcd_new_panel_st7701(ioHandle, &panel_config, &panelHandle) != ESP_OK) {
-        TT_LOG_E(TAG, "Failed to create panel");
-        return false;
-    }
-
-    if (esp_lcd_panel_reset(panelHandle) != ESP_OK) {
-        TT_LOG_E(TAG, "Failed to reset panel");
-        return false;
-    }
-
-    if (esp_lcd_panel_init(panelHandle) != ESP_OK) {
-        TT_LOG_E(TAG, "Failed to init panel");
-        return false;
-    }
-
-    if (esp_lcd_panel_invert_color(panelHandle, false) != ESP_OK) {
-        TT_LOG_E(TAG, "Failed to invert color");
-    }
-
-    esp_lcd_panel_set_gap(panelHandle, 0, 0);
-
-    if (esp_lcd_panel_disp_on_off(panelHandle, true) != ESP_OK) {
-        TT_LOG_E(TAG, "Failed to turn display on");
-    }
-
-    return true;
-}
-
-lvgl_port_display_cfg_t St7701Display::getLvglPortDisplayConfig(esp_lcd_panel_io_handle_t ioHandle, esp_lcd_panel_handle_t panelHandle) {
-    return {
-        .io_handle = ioHandle,
-        .panel_handle = panelHandle,
-        .control_handle = nullptr,
-        .buffer_size = (480 * 480),
-        .double_buffer = true,
-        .trans_size = 0,
-        .hres = 480,
-        .vres = 480,
-        .monochrome = false,
-        .rotation = {
-            .swap_xy = false,
-            .mirror_x = false,
-            .mirror_y = false,
-        },
-        .color_format = LV_COLOR_FORMAT_RGB565,
-        .flags = {
-            .buff_dma = false,
-            .buff_spiram = true,
-            .sw_rotate = false,
-            .swap_bytes = false,
-            .full_refresh = false,
-            .direct_mode = false
-        }
-    };
-}
-
-lvgl_port_display_rgb_cfg_t St7701Display::getLvglPortDisplayRgbConfig(esp_lcd_panel_io_handle_t ioHandle, esp_lcd_panel_handle_t panelHandle) {
-    return {
-        .flags = {
-            .bb_mode = true,
-            .avoid_tearing = false
-        }
-    };
-}
-
-std::shared_ptr<tt::hal::touch::TouchDevice> _Nullable St7701Display::getTouchDevice() {
-    if (touchDevice == nullptr) {
-        auto configuration = std::make_unique<Gt911Touch::Configuration>(
-           I2C_NUM_0,
-           480,
-           480
-       );
-
-        touchDevice = std::make_shared<Gt911Touch>(std::move(configuration));
-    }
-
-    return touchDevice;
-}
-
-void St7701Display::setBacklightDuty(uint8_t backlightDuty) {
-    driver::pwmbacklight::setBacklightDuty(backlightDuty);
-}

Boards/cyd-4848s040c/Source/devices/St7701Display.h

@@ -1,38 +0,0 @@
-#pragma once
-
-#include <Tactility/Mutex.h>
-
-#include <EspLcdDisplay.h>
-#include <lvgl.h>
-
-class St7701Display final : public EspLcdDisplay {
-
-    std::shared_ptr<tt::hal::touch::TouchDevice> _Nullable touchDevice;
-
-    bool createIoHandle(esp_lcd_panel_io_handle_t& outHandle) override;
-
-    bool createPanelHandle(esp_lcd_panel_io_handle_t ioHandle, esp_lcd_panel_handle_t& panelHandle) override;
-
-    lvgl_port_display_cfg_t getLvglPortDisplayConfig(esp_lcd_panel_io_handle_t ioHandle, esp_lcd_panel_handle_t panelHandle) override;
-
-    bool isRgbPanel() const override { return true; }
-
-    lvgl_port_display_rgb_cfg_t getLvglPortDisplayRgbConfig(esp_lcd_panel_io_handle_t ioHandle, esp_lcd_panel_handle_t panelHandle) override;
-
-public:
-
-    St7701Display() : EspLcdDisplay(std::make_shared<tt::Mutex>(tt::Mutex::Type::Recursive)) {}
-
-    std::string getName() const override { return "ST7701S"; }
-
-    std::string getDescription() const override { return "ST7701S RGB display"; }
-
-    std::shared_ptr<tt::hal::touch::TouchDevice> _Nullable getTouchDevice() override;
-
-    void setBacklightDuty(uint8_t backlightDuty) override;
-
-    bool supportsBacklightDuty() const override { return true; }
-
-    // TODO: Find out why it crashes
-    bool supportsDisplayDriver() const override { return false; }
-};

Boards/cyd-8048s043c/CMakeLists.txt

@@ -1,7 +0,0 @@
-file(GLOB_RECURSE SOURCE_FILES Source/*.c*)
-
-idf_component_register(
-    SRCS ${SOURCE_FILES}
-    INCLUDE_DIRS "Source"
-    REQUIRES Tactility esp_lvgl_port esp_lcd RgbDisplay GT911 PwmBacklight driver vfs fatfs
-)

Boards/cyd-8048s043c/Source/Configuration.cpp

@@ -1,114 +0,0 @@
-#include "PwmBacklight.h"
-#include "devices/Display.h"
-#include "devices/SdCard.h"
-
-#include <Tactility/hal/Configuration.h>
-
-using namespace tt::hal;
-
-static bool initBoot() {
-    // Display backlight
-    return driver::pwmbacklight::init(GPIO_NUM_2, 200);
-}
-
-static DeviceVector createDevices() {
-    return {
-        createDisplay(),
-        createSdCard()
-    };
-}
-
-extern const Configuration hardwareConfiguration = {
-    .initBoot = initBoot,
-    .createDevices = createDevices,
-    .i2c = {
-        // Touch
-        i2c::Configuration {
-            .name = "Internal",
-            .port = I2C_NUM_0,
-            .initMode = i2c::InitMode::ByTactility,
-            .isMutable = true,
-            .config = (i2c_config_t) {
-                .mode = I2C_MODE_MASTER,
-                .sda_io_num = GPIO_NUM_19,
-                .scl_io_num = GPIO_NUM_20,
-                .sda_pullup_en = true,
-                .scl_pullup_en = true,
-                .master = {
-                    .clk_speed = 400000
-                },
-                .clk_flags = 0
-            }
-        },
-        // P4 header, JST SH 1.0, GND / 3.3V / IO17 / IO18
-        i2c::Configuration {
-            .name = "External",
-            .port = I2C_NUM_1,
-            .initMode = i2c::InitMode::Disabled,
-            .isMutable = true,
-            .config = (i2c_config_t) {
-                .mode = I2C_MODE_MASTER,
-                .sda_io_num = GPIO_NUM_17,
-                .scl_io_num = GPIO_NUM_18,
-                .sda_pullup_en = false,
-                .scl_pullup_en = false,
-                .master = {
-                    .clk_speed = 400000
-                },
-                .clk_flags = 0
-            }
-        }
-    },
-    .spi {
-        // SD Card
-        spi::Configuration {
-            .device = SPI2_HOST,
-            .dma = SPI_DMA_CH_AUTO,
-            .config = {
-                .mosi_io_num = GPIO_NUM_11,
-                .miso_io_num = GPIO_NUM_13,
-                .sclk_io_num = GPIO_NUM_12,
-                .quadwp_io_num = GPIO_NUM_NC,
-                .quadhd_io_num = GPIO_NUM_NC,
-                .data4_io_num = GPIO_NUM_NC,
-                .data5_io_num = GPIO_NUM_NC,
-                .data6_io_num = GPIO_NUM_NC,
-                .data7_io_num = GPIO_NUM_NC,
-                .data_io_default_level = false,
-                .max_transfer_sz = 8192,
-                .flags = 0,
-                .isr_cpu_id = ESP_INTR_CPU_AFFINITY_AUTO,
-                .intr_flags = 0
-            },
-            .initMode = spi::InitMode::ByTactility,
-            .isMutable = false,
-            .lock = nullptr
-        }
-    },
-    .uart {
-        // P4 header, JST SH 1.0, GND / 3.3V / IO17 / IO18
-        uart::Configuration {
-            .name = "UART1",
-            .port = UART_NUM_1,
-            .rxPin = GPIO_NUM_17,
-            .txPin = GPIO_NUM_18,
-            .rtsPin = GPIO_NUM_NC,
-            .ctsPin = GPIO_NUM_NC,
-            .rxBufferSize = 1024,
-            .txBufferSize = 1024,
-            .config = {
-                .baud_rate = 9600,
-                .data_bits = UART_DATA_8_BITS,
-                .parity    = UART_PARITY_DISABLE,
-                .stop_bits = UART_STOP_BITS_1,
-                .flow_ctrl = UART_HW_FLOWCTRL_DISABLE,
-                .rx_flow_ctrl_thresh = 0,
-                .source_clk = UART_SCLK_DEFAULT,
-                .flags = {
-                    .allow_pd = 0,
-                    .backup_before_sleep = 0,
-                }
-            }
-        }
-    }
-};

Boards/cyd-8048s043c/Source/devices/Display.cpp

@@ -1,105 +0,0 @@
-#include "Display.h"
-
-#include <Gt911Touch.h>
-#include <PwmBacklight.h>
-#include <RgbDisplay.h>
-#include <Tactility/Log.h>
-
-std::shared_ptr<tt::hal::touch::TouchDevice> _Nullable createTouch() {
-    // Note for future changes: Reset pin is 38 and interrupt pin is 18
-    // or INT = NC, schematic and other info floating around is kinda conflicting...
-    auto configuration = std::make_unique<Gt911Touch::Configuration>(
-        I2C_NUM_0,
-        800,
-        480
-    );
-
-    return std::make_shared<Gt911Touch>(std::move(configuration));
-}
-
-std::shared_ptr<tt::hal::display::DisplayDevice> createDisplay() {
-    auto touch = createTouch();
-
-    constexpr uint32_t bufferPixels = 800 * 10;
-
-    esp_lcd_rgb_panel_config_t rgb_panel_config = {
-        .clk_src = LCD_CLK_SRC_DEFAULT,
-        .timings = {
-            .pclk_hz = 16000000,
-            .h_res = 800,
-            .v_res = 480,
-            .hsync_pulse_width = 4,
-            .hsync_back_porch = 8,
-            .hsync_front_porch = 8,
-            .vsync_pulse_width = 4,
-            .vsync_back_porch = 8,
-            .vsync_front_porch = 8,
-            .flags = {
-                .hsync_idle_low = false,
-                .vsync_idle_low = false,
-                .de_idle_high = false,
-                .pclk_active_neg = true,
-                .pclk_idle_high = false
-            }
-        },
-        .data_width = 16,
-        .bits_per_pixel = 0,
-        .num_fbs = 2,
-        .bounce_buffer_size_px = bufferPixels,
-        .sram_trans_align = 8,
-        .psram_trans_align = 64,
-        .hsync_gpio_num = GPIO_NUM_39,
-        .vsync_gpio_num = GPIO_NUM_41,
-        .de_gpio_num = GPIO_NUM_40 ,
-        .pclk_gpio_num = GPIO_NUM_42,
-        .disp_gpio_num = GPIO_NUM_NC,
-        .data_gpio_nums = {
-            GPIO_NUM_8, // B3
-            GPIO_NUM_3, // B4
-            GPIO_NUM_46, // B5
-            GPIO_NUM_9, // B6
-            GPIO_NUM_1, // B7
-            GPIO_NUM_5, // G2
-            GPIO_NUM_6, // G3
-            GPIO_NUM_7, // G4
-            GPIO_NUM_15, // G5
-            GPIO_NUM_16, // G6
-            GPIO_NUM_4, // G7
-            GPIO_NUM_45, // R3
-            GPIO_NUM_48, // R4
-            GPIO_NUM_47, // R5
-            GPIO_NUM_21, // R6
-            GPIO_NUM_14, // R7
-        },
-        .flags = {
-            .disp_active_low = false,
-            .refresh_on_demand = false,
-            .fb_in_psram = true,
-            .double_fb = true,
-            .no_fb = false,
-            .bb_invalidate_cache = false
-        }
-    };
-
-    RgbDisplay::BufferConfiguration buffer_config = {
-        .size = (800 * 480),
-        .useSpi = true,
-        .doubleBuffer = true,
-        .bounceBufferMode = true,
-        .avoidTearing = false
-    };
-
-    auto configuration = std::make_unique<RgbDisplay::Configuration>(
-        rgb_panel_config,
-        buffer_config,
-        touch,
-        LV_COLOR_FORMAT_RGB565,
-        false,
-        false,
-        false,
-        false,
-        driver::pwmbacklight::setBacklightDuty
-    );
-
-    return std::make_shared<RgbDisplay>(std::move(configuration));
-}

Boards/cyd-8048s043c/Source/devices/Display.h

@@ -1,5 +0,0 @@
-#pragma once
-
-#include "Tactility/hal/display/DisplayDevice.h"
-
-std::shared_ptr<tt::hal::display::DisplayDevice> createDisplay();

Boards/cyd-8048s043c/Source/devices/SdCard.cpp

@@ -1,22 +0,0 @@
-#include "SdCard.h"
-
-#include <Tactility/hal/sdcard/SpiSdCardDevice.h>
-#include <Tactility/lvgl/LvglSync.h>
-
-using tt::hal::sdcard::SpiSdCardDevice;
-
-std::shared_ptr<SdCardDevice> createSdCard() {
-    auto config = std::make_unique<SpiSdCardDevice::Config>(
-        GPIO_NUM_10,
-        GPIO_NUM_NC,
-        GPIO_NUM_NC,
-        GPIO_NUM_NC,
-        SdCardDevice::MountBehaviour::AtBoot
-    );
-
-    auto sdcard = std::make_shared<SpiSdCardDevice>(
-        std::move(config)
-    );
-
-    return std::static_pointer_cast<SdCardDevice>(sdcard);
-}

Boards/cyd-8048s043c/Source/devices/SdCard.h

@@ -1,7 +0,0 @@
-#pragma once
-
-#include "Tactility/hal/sdcard/SdCardDevice.h"
-
-using tt::hal::sdcard::SdCardDevice;
-
-std::shared_ptr<SdCardDevice> createSdCard();

Boards/cyd-e32r28t/CMakeLists.txt

@@ -1,7 +0,0 @@
-file(GLOB_RECURSE SOURCE_FILES Source/*.c*)
-
-idf_component_register(
-    SRCS ${SOURCE_FILES}
-    INCLUDE_DIRS "Source"
-    REQUIRES Tactility esp_lvgl_port ILI934x XPT2046SoftSPI PwmBacklight driver vfs fatfs
-)

Boards/cyd-e32r28t/Source/Configuration.cpp

@@ -1,72 +0,0 @@
-#include "devices/SdCard.h"
-#include "devices/Display.h"
-
-#include <Tactility/hal/Configuration.h>
-#include <Tactility/lvgl/LvglSync.h>
-#include <PwmBacklight.h>
-
-static bool initBoot() {
-    return driver::pwmbacklight::init(LCD_BACKLIGHT_PIN);
-}
-
-static tt::hal::DeviceVector createDevices() {
-    return {
-        createDisplay(),
-        createSdCard()
-    };
-}
-
-extern const tt::hal::Configuration hardwareConfiguration = {
-    .initBoot = initBoot,
-    .createDevices = createDevices,
-    .i2c = {},
-    .spi = {
-        tt::hal::spi::Configuration {
-            .device = SPI2_HOST,
-            .dma = SPI_DMA_CH_AUTO,
-            .config = {
-                .mosi_io_num = GPIO_NUM_13,
-                .miso_io_num = GPIO_NUM_12,
-                .sclk_io_num = GPIO_NUM_14,
-                .quadwp_io_num = GPIO_NUM_NC,
-                .quadhd_io_num = GPIO_NUM_NC,
-                .data4_io_num = GPIO_NUM_NC,
-                .data5_io_num = GPIO_NUM_NC,
-                .data6_io_num = GPIO_NUM_NC,
-                .data7_io_num = GPIO_NUM_NC,
-                .data_io_default_level = false,
-                .max_transfer_sz = LCD_SPI_TRANSFER_SIZE_LIMIT,
-                .flags = 0,
-                .isr_cpu_id = ESP_INTR_CPU_AFFINITY_AUTO,
-                .intr_flags = 0
-            },
-            .initMode = tt::hal::spi::InitMode::ByTactility,
-            .isMutable = false,
-            .lock = tt::lvgl::getSyncLock()
-        },
-        tt::hal::spi::Configuration {
-            .device = SPI3_HOST,
-            .dma = SPI_DMA_CH_AUTO,
-            .config = {
-                .mosi_io_num = GPIO_NUM_23,
-                .miso_io_num = GPIO_NUM_19,
-                .sclk_io_num = GPIO_NUM_18,
-                .quadwp_io_num = GPIO_NUM_NC,
-                .quadhd_io_num = GPIO_NUM_NC,
-                .data4_io_num = GPIO_NUM_NC,
-                .data5_io_num = GPIO_NUM_NC,
-                .data6_io_num = GPIO_NUM_NC,
-                .data7_io_num = GPIO_NUM_NC,
-                .data_io_default_level = false,
-                .max_transfer_sz = 0,
-                .flags = 0,
-                .isr_cpu_id = ESP_INTR_CPU_AFFINITY_AUTO,
-                .intr_flags = 0
-            },
-            .initMode = tt::hal::spi::InitMode::ByTactility,
-            .isMutable = false,
-            .lock = tt::lvgl::getSyncLock()
-        },
-
-    }
-};

Boards/cyd-e32r28t/Source/devices/Display.cpp

@@ -1,51 +0,0 @@
-#include "Display.h"
-
-#include <Xpt2046SoftSpi.h>
-#include <Ili934xDisplay.h>
-#include <PwmBacklight.h>
-#include <Tactility/hal/touch/TouchDevice.h>
-
-static std::shared_ptr<tt::hal::touch::TouchDevice> createTouch() {
-    auto config = std::make_unique<Xpt2046SoftSpi::Configuration>(
-        TOUCH_MOSI_PIN,
-        TOUCH_MISO_PIN,
-        TOUCH_SCK_PIN,
-        TOUCH_CS_PIN,
-        LCD_HORIZONTAL_RESOLUTION,
-        LCD_VERTICAL_RESOLUTION,
-        false,
-        true,
-        false
-    );
-
-    return std::make_shared<Xpt2046SoftSpi>(std::move(config));
-}
-
-std::shared_ptr<tt::hal::display::DisplayDevice> createDisplay() {
-    Ili934xDisplay::Configuration panel_configuration = {
-        .horizontalResolution = LCD_HORIZONTAL_RESOLUTION,
-        .verticalResolution = LCD_VERTICAL_RESOLUTION,
-        .gapX = 0,
-        .gapY = 0,
-        .swapXY = false,
-        .mirrorX = true,
-        .mirrorY = false,
-        .invertColor = false,
-        .swapBytes = true,
-        .bufferSize = LCD_BUFFER_SIZE,
-        .touch = createTouch(),
-        .backlightDutyFunction = driver::pwmbacklight::setBacklightDuty,
-        .resetPin = GPIO_NUM_NC,
-        .rgbElementOrder = LCD_RGB_ELEMENT_ORDER_BGR
-    };
-
-    auto spi_configuration = std::make_shared<Ili934xDisplay::SpiConfiguration>(Ili934xDisplay::SpiConfiguration {
-        .spiHostDevice = LCD_SPI_HOST,
-        .csPin = LCD_PIN_CS,
-        .dcPin = LCD_PIN_DC,
-        .pixelClockFrequency = 40'000'000,
-        .transactionQueueDepth = 10
-    });
-
-    return std::make_shared<Ili934xDisplay>(panel_configuration, spi_configuration, true);
-}

Boards/cyd-e32r28t/Source/devices/Display.h

@@ -1,28 +0,0 @@
-#pragma once
-
-#include <Tactility/hal/display/DisplayDevice.h>
-#include <driver/gpio.h>
-#include <driver/spi_common.h>
-#include <memory>
-
-// Display
-constexpr auto LCD_SPI_HOST = SPI2_HOST;
-constexpr auto LCD_PIN_CS = GPIO_NUM_15;
-constexpr auto LCD_PIN_DC = GPIO_NUM_2;
-constexpr auto LCD_HORIZONTAL_RESOLUTION = 240;
-constexpr auto LCD_VERTICAL_RESOLUTION = 320;
-constexpr auto LCD_BUFFER_HEIGHT = (LCD_VERTICAL_RESOLUTION / 10);
-constexpr auto LCD_BUFFER_SIZE = (LCD_HORIZONTAL_RESOLUTION * LCD_BUFFER_HEIGHT);
-constexpr auto LCD_SPI_TRANSFER_SIZE_LIMIT = LCD_BUFFER_SIZE * LV_COLOR_DEPTH / 8;
-
-// Touch (Software SPI)
-constexpr auto TOUCH_MISO_PIN = GPIO_NUM_39;
-constexpr auto TOUCH_MOSI_PIN = GPIO_NUM_32;
-constexpr auto TOUCH_SCK_PIN = GPIO_NUM_25;
-constexpr auto TOUCH_CS_PIN = GPIO_NUM_33;
-constexpr auto TOUCH_IRQ_PIN = GPIO_NUM_36;
-
-// Backlight
-constexpr auto LCD_BACKLIGHT_PIN = GPIO_NUM_21;
-
-std::shared_ptr<tt::hal::display::DisplayDevice> createDisplay();

Boards/cyd-e32r28t/Source/devices/SdCard.cpp

@@ -1,21 +0,0 @@
-#include "SdCard.h"
-#include <Tactility/hal/sdcard/SpiSdCardDevice.h>
-
-using tt::hal::sdcard::SpiSdCardDevice;
-
-std::shared_ptr<SdCardDevice> createSdCard() {
-    auto configuration = std::make_unique<SpiSdCardDevice::Config>(
-        GPIO_NUM_5,
-        GPIO_NUM_NC,
-        GPIO_NUM_NC,
-        GPIO_NUM_NC,
-        SdCardDevice::MountBehaviour::AtBoot,
-        std::make_shared<tt::Mutex>(tt::Mutex::Type::Recursive),
-        std::vector<gpio_num_t>(),
-        SPI3_HOST
-    );
-
-    return std::make_shared<SpiSdCardDevice>(
-        std::move(configuration)
-    );
-}

Boards/cyd-e32r28t/Source/devices/SdCard.h

@@ -1,7 +0,0 @@
-#pragma once
-
-#include <Tactility/hal/sdcard/SdCardDevice.h>
-
-using tt::hal::sdcard::SdCardDevice;
-
-std::shared_ptr<SdCardDevice> createSdCard();

Boards/cyd-e32r32p/CMakeLists.txt

@@ -1,7 +0,0 @@
-file(GLOB_RECURSE SOURCE_FILES Source/*.c*)
-
-idf_component_register(
-    SRCS ${SOURCE_FILES}
-    INCLUDE_DIRS "Source"
-    REQUIRES Tactility esp_lvgl_port ST7789 XPT2046 PwmBacklight EstimatedPower driver vfs fatfs
-)

Boards/cyd-e32r32p/Source/Configuration.cpp

@@ -1,96 +0,0 @@
-#include "devices/SdCard.h"
-#include "devices/Display.h"
-#include "devices/Power.h"
-
-#include <Tactility/hal/Configuration.h>
-#include <Tactility/lvgl/LvglSync.h>
-#include <PwmBacklight.h>
-
-using namespace tt::hal;
-
-static bool initBoot() {
-    return driver::pwmbacklight::init(DISPLAY_BACKLIGHT_PIN);
-}
-
-static tt::hal::DeviceVector createDevices() {
-    return {
-        createPower(),
-        createDisplay(),
-        createSdCard()
-    };
-}
-
-extern const Configuration hardwareConfiguration = {
-    .initBoot = initBoot,
-    .createDevices = createDevices,
-    .i2c = {
-        tt::hal::i2c::Configuration {
-            .name = "External",
-            .port = I2C_NUM_0,
-            .initMode = tt::hal::i2c::InitMode::ByTactility,
-            .isMutable = true,
-            .config = (i2c_config_t) {
-                .mode = I2C_MODE_MASTER,
-                .sda_io_num = GPIO_NUM_32,
-                .scl_io_num = GPIO_NUM_25,
-                .sda_pullup_en = false,
-                .scl_pullup_en = false,
-                .master = {
-                    .clk_speed = 400000
-                },
-                .clk_flags = 0
-            }
-        },
-    },
-    // Display
-    .spi = {
-        tt::hal::spi::Configuration {
-            .device = SPI2_HOST,
-            .dma = SPI_DMA_CH_AUTO,
-            .config = {
-                .mosi_io_num = GPIO_NUM_13,
-                .miso_io_num = GPIO_NUM_12,
-                .sclk_io_num = GPIO_NUM_14,
-                .quadwp_io_num = GPIO_NUM_NC,
-                .quadhd_io_num = GPIO_NUM_NC,
-                .data4_io_num = GPIO_NUM_NC,
-                .data5_io_num = GPIO_NUM_NC,
-                .data6_io_num = GPIO_NUM_NC,
-                .data7_io_num = GPIO_NUM_NC,
-                .data_io_default_level = false,
-                .max_transfer_sz = DISPLAY_SPI_TRANSFER_SIZE_LIMIT,
-                .flags = 0,
-                .isr_cpu_id = ESP_INTR_CPU_AFFINITY_AUTO,
-                .intr_flags = 0
-            },
-            .initMode = tt::hal::spi::InitMode::ByTactility,
-            .isMutable = false,
-            .lock = tt::lvgl::getSyncLock()
-        },
-        // SD Card
-        tt::hal::spi::Configuration {
-            .device = SPI3_HOST,
-            .dma = SPI_DMA_CH_AUTO,
-            .config = {
-                .mosi_io_num = GPIO_NUM_23,
-                .miso_io_num = GPIO_NUM_19,
-                .sclk_io_num = GPIO_NUM_18,
-                .quadwp_io_num = GPIO_NUM_NC,
-                .quadhd_io_num = GPIO_NUM_NC,
-                .data4_io_num = GPIO_NUM_NC,
-                .data5_io_num = GPIO_NUM_NC,
-                .data6_io_num = GPIO_NUM_NC,
-                .data7_io_num = GPIO_NUM_NC,
-                .data_io_default_level = false,
-                .max_transfer_sz = 8192,
-                .flags = 0,
-                .isr_cpu_id = ESP_INTR_CPU_AFFINITY_AUTO,
-                .intr_flags = 0
-            },
-            .initMode = tt::hal::spi::InitMode::ByTactility,
-            .isMutable = false,
-            .lock = nullptr
-        },
-
-    }
-};

Boards/cyd-e32r32p/Source/devices/Display.cpp

@@ -1,51 +0,0 @@
-#include "Display.h"
-
-#include <Xpt2046Touch.h>
-#include <St7789Display.h>
-#include <PwmBacklight.h>
-#include <Tactility/hal/touch/TouchDevice.h>
-
-// Create the XPT2046 touch device (hardware/esp_lcd driver)
-static std::shared_ptr<tt::hal::touch::TouchDevice> createTouch() {
-    auto config = std::make_unique<Xpt2046Touch::Configuration>(
-        DISPLAY_SPI_HOST,                                // spi device / bus (SPI2_HOST)
-        TOUCH_CS_PIN,                                    // touch CS (IO33)
-        (uint16_t)DISPLAY_HORIZONTAL_RESOLUTION,         // x max
-        (uint16_t)DISPLAY_VERTICAL_RESOLUTION,           // y max
-        false,                                               // swapXy
-        true,                                                // mirrorX
-        true                                                 // mirrorY
-    );
-
-    return std::make_shared<Xpt2046Touch>(std::move(config));
-}
-
-std::shared_ptr<tt::hal::display::DisplayDevice> createDisplay() {
-    // Create the ST7789 panel configuration
-    St7789Display::Configuration panel_configuration = {
-        .horizontalResolution = DISPLAY_HORIZONTAL_RESOLUTION,
-        .verticalResolution = DISPLAY_VERTICAL_RESOLUTION,
-        .gapX = 0,
-        .gapY = 0,
-        .swapXY = false,
-        .mirrorX = false,
-        .mirrorY = false,
-        .invertColor = false,
-        .bufferSize = DISPLAY_DRAW_BUFFER_SIZE,  // 0 -> default 1/10 screen
-        .touch = createTouch(),
-        .backlightDutyFunction = driver::pwmbacklight::setBacklightDuty,
-        .resetPin = GPIO_NUM_NC,
-        .rgbElementOrder = LCD_RGB_ELEMENT_ORDER_BGR  // BGR for this display
-    };
-
-    // Create the SPI configuration (from EspLcdSpiDisplay base class)
-    auto spi_configuration = std::make_shared<EspLcdSpiDisplay::SpiConfiguration>(EspLcdSpiDisplay::SpiConfiguration {
-        .spiHostDevice = DISPLAY_SPI_HOST,
-        .csPin = DISPLAY_PIN_CS,
-        .dcPin = DISPLAY_PIN_DC,
-        .pixelClockFrequency = 40'000'000,
-        .transactionQueueDepth = 10
-    });
-
-    return std::make_shared<St7789Display>(panel_configuration, spi_configuration);
-}

Boards/cyd-e32r32p/Source/devices/Display.h

@@ -1,27 +0,0 @@
-#pragma once
-
-#include <Tactility/hal/display/DisplayDevice.h>
-#include "driver/gpio.h"
-#include "driver/spi_common.h"
-#include <memory>
-
-// Display (ST7789P3 on this board)
-constexpr auto DISPLAY_SPI_HOST = SPI2_HOST;
-constexpr auto DISPLAY_PIN_CS = GPIO_NUM_15;
-constexpr auto DISPLAY_PIN_DC = GPIO_NUM_2;
-constexpr auto DISPLAY_HORIZONTAL_RESOLUTION = 240;
-constexpr auto DISPLAY_VERTICAL_RESOLUTION = 320;
-constexpr auto DISPLAY_DRAW_BUFFER_HEIGHT = (DISPLAY_VERTICAL_RESOLUTION / 10);
-constexpr auto DISPLAY_DRAW_BUFFER_SIZE = (DISPLAY_HORIZONTAL_RESOLUTION * DISPLAY_DRAW_BUFFER_HEIGHT);
-constexpr auto DISPLAY_BACKLIGHT_PIN = GPIO_NUM_27;
-constexpr auto DISPLAY_SPI_TRANSFER_SIZE_LIMIT = DISPLAY_DRAW_BUFFER_SIZE * sizeof(lv_color_t);
-
-// Touch (XPT2046, resistive, shared SPI with display)
-constexpr auto TOUCH_MISO_PIN = GPIO_NUM_12;
-constexpr auto TOUCH_MOSI_PIN = GPIO_NUM_13;
-constexpr auto TOUCH_SCK_PIN = GPIO_NUM_14;
-constexpr auto TOUCH_CS_PIN = GPIO_NUM_33;
-constexpr auto TOUCH_IRQ_PIN = GPIO_NUM_36;
-
-
-std::shared_ptr<tt::hal::display::DisplayDevice> createDisplay();

Boards/cyd-e32r32p/Source/devices/Power.cpp

@@ -1,12 +0,0 @@
-#include "Power.h"
-
-#include <ChargeFromAdcVoltage.h>
-#include <EstimatedPower.h>
-
-std::shared_ptr<tt::hal::power::PowerDevice> createPower() {
-    ChargeFromAdcVoltage::Configuration configuration;
-    // 2.0 ratio, but +.11 added as display voltage sag compensation.
-    configuration.adcMultiplier = 2.11;
-
-    return std::make_shared<EstimatedPower>(configuration);
-}

Boards/cyd-e32r32p/Source/devices/Power.h

@@ -1,6 +0,0 @@
-#pragma once
-
-#include <memory>
-#include <Tactility/hal/power/PowerDevice.h>
-
-std::shared_ptr<tt::hal::power::PowerDevice> createPower();

Boards/cyd-e32r32p/Source/devices/SdCard.cpp

@@ -1,22 +0,0 @@
-#include "SdCard.h"
-#include <Tactility/hal/sdcard/SpiSdCardDevice.h>
-
-using tt::hal::sdcard::SpiSdCardDevice;
-using SdCardDevice = tt::hal::sdcard::SdCardDevice;
-
-std::shared_ptr<SdCardDevice> createSdCard() {
-    auto configuration = std::make_unique<SpiSdCardDevice::Config>(
-        SD_CS_PIN,                         // CS pin (IO5 on the module)
-        GPIO_NUM_NC,                           // MOSI override: leave NC to use SPI host pins
-        GPIO_NUM_NC,                           // MISO override: leave NC
-        GPIO_NUM_NC,                           // SCLK override: leave NC
-        SdCardDevice::MountBehaviour::AtBoot,
-        std::make_shared<tt::Mutex>(tt::Mutex::Type::Recursive),
-        std::vector<gpio_num_t>(),
-        SD_SPI_HOST                        // SPI host for SD card (SPI3_HOST)
-    );
-
-    return std::make_shared<SpiSdCardDevice>(
-        std::move(configuration)
-    );
-}

Boards/cyd-e32r32p/Source/devices/SdCard.h

@@ -1,13 +0,0 @@
-#pragma once
-
-#include <Tactility/hal/sdcard/SdCardDevice.h>
-#include "driver/gpio.h"
-#include "driver/spi_common.h"
-
-using tt::hal::sdcard::SdCardDevice;
-
-// SD card (microSD)
-constexpr auto SD_CS_PIN = GPIO_NUM_5;
-constexpr auto SD_SPI_HOST = SPI3_HOST;
-
-std::shared_ptr<SdCardDevice> createSdCard();

Boards/cyd-jc2432w328c/CMakeLists.txt

@@ -1,7 +0,0 @@
-file(GLOB_RECURSE SOURCE_FILES Source/*.c*)
-
-idf_component_register(
-    SRCS ${SOURCE_FILES}
-    INCLUDE_DIRS "Source"
-    REQUIRES Tactility esp_lvgl_port ST7789 CST816S PwmBacklight driver vfs fatfs
-)

Boards/cyd-jc2432w328c/Source/Configuration.cpp

@@ -1,148 +0,0 @@
-#include "devices/Display.h"
-#include "devices/SdCard.h"
-
-#include <PwmBacklight.h>
-#include <Tactility/hal/Configuration.h>
-#include <Tactility/lvgl/LvglSync.h>
-
-using namespace tt::hal;
-
-static bool initBoot() {
-    //Set the RGB Led Pins to output and turn them off
-    ESP_ERROR_CHECK(gpio_set_direction(GPIO_NUM_4, GPIO_MODE_OUTPUT)); //Red
-    ESP_ERROR_CHECK(gpio_set_direction(GPIO_NUM_16, GPIO_MODE_OUTPUT)); //Green
-    ESP_ERROR_CHECK(gpio_set_direction(GPIO_NUM_17, GPIO_MODE_OUTPUT)); //Blue
-
-    //0 on, 1 off... yep it's backwards.
-    ESP_ERROR_CHECK(gpio_set_level(GPIO_NUM_4, 1)); //Red
-    ESP_ERROR_CHECK(gpio_set_level(GPIO_NUM_16, 1)); //Green
-    ESP_ERROR_CHECK(gpio_set_level(GPIO_NUM_17, 1)); //Blue
-
-    return driver::pwmbacklight::init(LCD_PIN_BACKLIGHT);
-}
-
-static DeviceVector createDevices() {
-    return {
-        createDisplay(),
-        createSdCard()
-    };
-}
-
-extern const Configuration hardwareConfiguration = {
-    .initBoot = initBoot,
-    .createDevices = createDevices,
-    .i2c = {
-        //Touch
-        i2c::Configuration {
-            .name = "Internal",
-            .port = I2C_NUM_0,
-            .initMode = i2c::InitMode::ByTactility,
-            .isMutable = true,
-            .config = (i2c_config_t) {
-                .mode = I2C_MODE_MASTER,
-                .sda_io_num = GPIO_NUM_33,
-                .scl_io_num = GPIO_NUM_32,
-                .sda_pullup_en = false,
-                .scl_pullup_en = false,
-                .master = {
-                    .clk_speed = 400000
-                },
-                .clk_flags = 0
-            }
-        },
-        //CN1 header, JST SH 1.25, GND / IO22 / IO21 / 3.3V
-        i2c::Configuration {
-            .name = "External",
-            .port = I2C_NUM_1,
-            .initMode = i2c::InitMode::Disabled,
-            .isMutable = true,
-            .config = (i2c_config_t) {
-                .mode = I2C_MODE_MASTER,
-                .sda_io_num = GPIO_NUM_21,
-                .scl_io_num = GPIO_NUM_22,
-                .sda_pullup_en = false,
-                .scl_pullup_en = false,
-                .master = {
-                    .clk_speed = 400000
-                },
-                .clk_flags = 0
-            }
-        }
-    },
-    .spi {
-        //Display
-        spi::Configuration {
-            .device = SPI2_HOST,
-            .dma = SPI_DMA_CH_AUTO,
-            .config = {
-                .mosi_io_num = GPIO_NUM_13,
-                .miso_io_num = GPIO_NUM_NC,
-                .sclk_io_num = GPIO_NUM_14,
-                .quadwp_io_num = GPIO_NUM_NC,
-                .quadhd_io_num = GPIO_NUM_NC,
-                .data4_io_num = GPIO_NUM_NC,
-                .data5_io_num = GPIO_NUM_NC,
-                .data6_io_num = GPIO_NUM_NC,
-                .data7_io_num = GPIO_NUM_NC,
-                .data_io_default_level = false,
-                .max_transfer_sz = LCD_SPI_TRANSFER_SIZE_LIMIT,
-                .flags = 0,
-                .isr_cpu_id = ESP_INTR_CPU_AFFINITY_AUTO,
-                .intr_flags = 0
-            },
-            .initMode = spi::InitMode::ByTactility,
-            .isMutable = false,
-            .lock = tt::lvgl::getSyncLock()
-        },
-        //SD Card
-        spi::Configuration {
-            .device = SPI3_HOST,
-            .dma = SPI_DMA_CH_AUTO,
-            .config = {
-                .mosi_io_num = GPIO_NUM_23,
-                .miso_io_num = GPIO_NUM_19,
-                .sclk_io_num = GPIO_NUM_18,
-                .quadwp_io_num = GPIO_NUM_NC,
-                .quadhd_io_num = GPIO_NUM_NC,
-                .data4_io_num = GPIO_NUM_NC,
-                .data5_io_num = GPIO_NUM_NC,
-                .data6_io_num = GPIO_NUM_NC,
-                .data7_io_num = GPIO_NUM_NC,
-                .data_io_default_level = false,
-                .max_transfer_sz = 8192,
-                .flags = 0,
-                .isr_cpu_id = ESP_INTR_CPU_AFFINITY_AUTO,
-                .intr_flags = 0
-            },
-            .initMode = spi::InitMode::ByTactility,
-            .isMutable = false,
-            .lock = nullptr
-        }
-    },
-    .uart {
-        //CN1 header, JST SH 1.25, GND / IO22 / IO21 / 3.3V
-        uart::Configuration {
-            .name = "UART1",
-            .port = UART_NUM_1,
-            .rxPin = GPIO_NUM_21,
-            .txPin = GPIO_NUM_22,
-            .rtsPin = GPIO_NUM_NC,
-            .ctsPin = GPIO_NUM_NC,
-            .rxBufferSize = 1024,
-            .txBufferSize = 1024,
-            .config = {
-                .baud_rate = 9600,
-                .data_bits = UART_DATA_8_BITS,
-                .parity    = UART_PARITY_DISABLE,
-                .stop_bits = UART_STOP_BITS_1,
-                .flow_ctrl = UART_HW_FLOWCTRL_DISABLE,
-                .rx_flow_ctrl_thresh = 0,
-                .source_clk = UART_SCLK_DEFAULT,
-                .flags = {
-                    .allow_pd = 0,
-                    .backup_before_sleep = 0,
-                }
-            }
-        }
-    }
-};

Boards/cyd-jc2432w328c/Source/devices/Display.cpp

@@ -1,42 +0,0 @@
-#include "Display.h"
-
-#include <Cst816Touch.h>
-#include <PwmBacklight.h>
-#include <St7789Display.h>
-
-static std::shared_ptr<tt::hal::touch::TouchDevice> createTouch() {
-    auto configuration = std::make_unique<Cst816sTouch::Configuration>(
-        I2C_NUM_0,
-        LCD_HORIZONTAL_RESOLUTION,
-        LCD_VERTICAL_RESOLUTION
-    );
-
-    return std::make_shared<Cst816sTouch>(std::move(configuration));
-}
-
-std::shared_ptr<tt::hal::display::DisplayDevice> createDisplay() {
-    St7789Display::Configuration panel_configuration = {
-        .horizontalResolution = LCD_HORIZONTAL_RESOLUTION,
-        .verticalResolution = LCD_VERTICAL_RESOLUTION,
-        .gapX = 0,
-        .gapY = 0,
-        .swapXY = false,
-        .mirrorX = false,
-        .mirrorY = false,
-        .invertColor = false,
-        .bufferSize = LCD_BUFFER_SIZE,
-        .touch = createTouch(),
-        .backlightDutyFunction = driver::pwmbacklight::setBacklightDuty,
-        .resetPin = GPIO_NUM_NC
-    };
-
-    auto spi_configuration = std::make_shared<St7789Display::SpiConfiguration>(St7789Display::SpiConfiguration {
-        .spiHostDevice = LCD_SPI_HOST,
-        .csPin = LCD_PIN_CS,
-        .dcPin = LCD_PIN_DC,
-        .pixelClockFrequency = 62'500'000,
-        .transactionQueueDepth = 10
-    });
-
-    return std::make_shared<St7789Display>(panel_configuration, spi_configuration);
-}

Boards/cyd-jc2432w328c/Source/devices/Display.h

@@ -1,23 +0,0 @@
-#pragma once
-
-#include "Display.h"
-
-#include <Tactility/hal/display/DisplayDevice.h>
-#include <memory>
-#include <driver/gpio.h>
-#include <driver/spi_common.h>
-
-// Display backlight (PWM)
-constexpr auto LCD_PIN_BACKLIGHT = GPIO_NUM_27;
-
-// Display
-constexpr auto LCD_SPI_HOST = SPI2_HOST;
-constexpr auto LCD_PIN_CS = GPIO_NUM_15;
-constexpr auto LCD_PIN_DC = GPIO_NUM_2;
-constexpr auto LCD_HORIZONTAL_RESOLUTION = 240;
-constexpr auto LCD_VERTICAL_RESOLUTION = 320;
-constexpr auto LCD_BUFFER_HEIGHT = LCD_VERTICAL_RESOLUTION / 10;
-constexpr auto LCD_BUFFER_SIZE = LCD_HORIZONTAL_RESOLUTION * LCD_BUFFER_HEIGHT;
-constexpr auto LCD_SPI_TRANSFER_SIZE_LIMIT = LCD_BUFFER_SIZE * LV_COLOR_DEPTH / 8;
-
-std::shared_ptr<tt::hal::display::DisplayDevice> createDisplay();

Boards/cyd-jc2432w328c/Source/devices/SdCard.cpp

@@ -1,27 +0,0 @@
-#include "SdCard.h"
-
-#include <Tactility/hal/sdcard/SpiSdCardDevice.h>
-#include <Tactility/lvgl/LvglSync.h>
-
-constexpr auto SDCARD_SPI_HOST = SPI3_HOST;
-constexpr auto SDCARD_PIN_CS = GPIO_NUM_5;
-
-using tt::hal::sdcard::SpiSdCardDevice;
-
-std::shared_ptr<SdCardDevice> createSdCard() {
-    auto configuration = std::make_unique<SpiSdCardDevice::Config>(
-        SDCARD_PIN_CS,
-        GPIO_NUM_NC,
-        GPIO_NUM_NC,
-        GPIO_NUM_NC,
-        SdCardDevice::MountBehaviour::AtBoot,
-        std::make_shared<tt::Mutex>(tt::Mutex::Type::Recursive),
-        std::vector<gpio_num_t>(),
-        SDCARD_SPI_HOST
-    );
-
-    return std::make_shared<SpiSdCardDevice>(
-        std::move(configuration)
-    );
-}
-

Boards/cyd-jc2432w328c/Source/devices/SdCard.h

@@ -1,8 +0,0 @@
-#pragma once
-
-#include <Tactility/hal/sdcard/SdCardDevice.h>
-
-using tt::hal::sdcard::SdCardDevice;
-
-std::shared_ptr<SdCardDevice> createSdCard();
-

Boards/cyd-jc8048w550c/CMakeLists.txt

@@ -1,7 +0,0 @@
-file(GLOB_RECURSE SOURCE_FILES Source/*.c*)
-
-idf_component_register(
-    SRCS ${SOURCE_FILES}
-    INCLUDE_DIRS "Source"
-    REQUIRES Tactility esp_lvgl_port esp_lcd RgbDisplay GT911 PwmBacklight driver vfs fatfs
-)

Boards/cyd-jc8048w550c/Source/Configuration.cpp

@@ -1,114 +0,0 @@
-#include "PwmBacklight.h"
-#include "devices/Display.h"
-#include "devices/SdCard.h"
-
-#include <Tactility/hal/Configuration.h>
-
-using namespace tt::hal;
-
-static bool initBoot() {
-    return driver::pwmbacklight::init(GPIO_NUM_2);
-}
-
-static DeviceVector createDevices() {
-    return {
-        createDisplay(),
-        createSdCard()
-    };
-}
-
-extern const Configuration hardwareConfiguration = {
-    .initBoot = initBoot,
-    .createDevices = createDevices,
-    .i2c = {
-        //Touch
-        i2c::Configuration {
-            .name = "Internal",
-            .port = I2C_NUM_0,
-            .initMode = i2c::InitMode::ByTactility,
-            .isMutable = true,
-            .config = (i2c_config_t) {
-                .mode = I2C_MODE_MASTER,
-                .sda_io_num = GPIO_NUM_19,
-                .scl_io_num = GPIO_NUM_20,
-                .sda_pullup_en = true,
-                .scl_pullup_en = true,
-                .master = {
-                    .clk_speed = 400000
-                },
-                .clk_flags = 0
-            }
-        },
-        //P4 header, JST SH 1.25, GND / 3.3V / IO17 / IO18 or
-        //P5 header, JST SH 1.0, GND / 3.3V / IO17 / IO18
-        i2c::Configuration {
-            .name = "External",
-            .port = I2C_NUM_1,
-            .initMode = i2c::InitMode::Disabled,
-            .isMutable = true,
-            .config = (i2c_config_t) {
-                .mode = I2C_MODE_MASTER,
-                .sda_io_num = GPIO_NUM_17,
-                .scl_io_num = GPIO_NUM_18,
-                .sda_pullup_en = true,
-                .scl_pullup_en = true,
-                .master = {
-                    .clk_speed = 400000
-                },
-                .clk_flags = 0
-            }
-        }
-    },
-    .spi {
-        //SD Card
-        spi::Configuration {
-            .device = SPI2_HOST,
-            .dma = SPI_DMA_CH_AUTO,
-            .config = {
-                .mosi_io_num = GPIO_NUM_11,
-                .miso_io_num = GPIO_NUM_13,
-                .sclk_io_num = GPIO_NUM_12,
-                .quadwp_io_num = GPIO_NUM_NC,
-                .quadhd_io_num = GPIO_NUM_NC,
-                .data4_io_num = GPIO_NUM_NC,
-                .data5_io_num = GPIO_NUM_NC,
-                .data6_io_num = GPIO_NUM_NC,
-                .data7_io_num = GPIO_NUM_NC,
-                .data_io_default_level = false,
-                .max_transfer_sz = 8192,
-                .flags = 0,
-                .isr_cpu_id = ESP_INTR_CPU_AFFINITY_AUTO,
-                .intr_flags = 0
-            },
-            .initMode = spi::InitMode::ByTactility,
-            .isMutable = false,
-            .lock = nullptr
-        }
-    },
-    .uart {
-        //P4 header, JST SH 1.0, GND / 3.3V / IO17 / IO18
-        uart::Configuration {
-            .name = "UART1",
-            .port = UART_NUM_1,
-            .rxPin = GPIO_NUM_17,
-            .txPin = GPIO_NUM_18,
-            .rtsPin = GPIO_NUM_NC,
-            .ctsPin = GPIO_NUM_NC,
-            .rxBufferSize = 1024,
-            .txBufferSize = 1024,
-            .config = {
-                .baud_rate = 9600,
-                .data_bits = UART_DATA_8_BITS,
-                .parity    = UART_PARITY_DISABLE,
-                .stop_bits = UART_STOP_BITS_1,
-                .flow_ctrl = UART_HW_FLOWCTRL_DISABLE,
-                .rx_flow_ctrl_thresh = 0,
-                .source_clk = UART_SCLK_DEFAULT,
-                .flags = {
-                    .allow_pd = 0,
-                    .backup_before_sleep = 0,
-                }
-            }
-        }
-    }
-};

Boards/cyd-jc8048w550c/Source/devices/Display.cpp

@@ -1,105 +0,0 @@
-#include "Display.h"
-
-#include <Gt911Touch.h>
-#include <PwmBacklight.h>
-#include <RgbDisplay.h>
-#include <Tactility/Log.h>
-
-std::shared_ptr<tt::hal::touch::TouchDevice> _Nullable createTouch() {
-    // Note for future changes: Reset pin is 38 and interrupt pin is 18
-    // or INT = NC, schematic and other info floating around is kinda conflicting...
-    auto configuration = std::make_unique<Gt911Touch::Configuration>(
-        I2C_NUM_0,
-        800,
-        480
-    );
-
-    return std::make_shared<Gt911Touch>(std::move(configuration));
-}
-
-std::shared_ptr<tt::hal::display::DisplayDevice> createDisplay() {
-    auto touch = createTouch();
-
-    constexpr uint32_t bufferPixels = 800 * 10;
-
-    esp_lcd_rgb_panel_config_t rgb_panel_config = {
-        .clk_src = LCD_CLK_SRC_DEFAULT,
-        .timings = {
-            .pclk_hz = 16000000,
-            .h_res = 800,
-            .v_res = 480,
-            .hsync_pulse_width = 4,
-            .hsync_back_porch = 8,
-            .hsync_front_porch = 8,
-            .vsync_pulse_width = 4,
-            .vsync_back_porch = 8,
-            .vsync_front_porch = 8,
-            .flags = {
-                .hsync_idle_low = false,
-                .vsync_idle_low = false,
-                .de_idle_high = false,
-                .pclk_active_neg = true,
-                .pclk_idle_high = false
-            }
-        },
-        .data_width = 16,
-        .bits_per_pixel = 0,
-        .num_fbs = 2,
-        .bounce_buffer_size_px = bufferPixels,
-        .sram_trans_align = 8,
-        .psram_trans_align = 64,
-        .hsync_gpio_num = GPIO_NUM_39,
-        .vsync_gpio_num = GPIO_NUM_41,
-        .de_gpio_num = GPIO_NUM_40 ,
-        .pclk_gpio_num = GPIO_NUM_42,
-        .disp_gpio_num = GPIO_NUM_NC,
-        .data_gpio_nums = {
-            GPIO_NUM_8, // B3
-            GPIO_NUM_3, // B4
-            GPIO_NUM_46, // B5
-            GPIO_NUM_9, // B6
-            GPIO_NUM_1, // B7
-            GPIO_NUM_5, // G2
-            GPIO_NUM_6, // G3
-            GPIO_NUM_7, // G4
-            GPIO_NUM_15, // G5
-            GPIO_NUM_16, // G6
-            GPIO_NUM_4, // G7
-            GPIO_NUM_45, // R3
-            GPIO_NUM_48, // R4
-            GPIO_NUM_47, // R5
-            GPIO_NUM_21, // R6
-            GPIO_NUM_14, // R7
-        },
-        .flags = {
-            .disp_active_low = false,
-            .refresh_on_demand = false,
-            .fb_in_psram = true,
-            .double_fb = true,
-            .no_fb = false,
-            .bb_invalidate_cache = false
-        }
-    };
-
-    RgbDisplay::BufferConfiguration buffer_config = {
-        .size = (800 * 480),
-        .useSpi = true,
-        .doubleBuffer = true,
-        .bounceBufferMode = true,
-        .avoidTearing = false
-    };
-
-    auto configuration = std::make_unique<RgbDisplay::Configuration>(
-        rgb_panel_config,
-        buffer_config,
-        touch,
-        LV_COLOR_FORMAT_RGB565,
-        false,
-        false,
-        false,
-        false,
-        driver::pwmbacklight::setBacklightDuty
-    );
-
-    return std::make_shared<RgbDisplay>(std::move(configuration));
-}

Boards/cyd-jc8048w550c/Source/devices/Display.h

@@ -1,5 +0,0 @@
-#pragma once
-
-#include <Tactility/hal/display/DisplayDevice.h>
-
-std::shared_ptr<tt::hal::display::DisplayDevice> createDisplay();

Boards/cyd-jc8048w550c/Source/devices/SdCard.cpp

@@ -1,25 +0,0 @@
-#include "SdCard.h"
-
-#include <Tactility/hal/sdcard/SpiSdCardDevice.h>
-#include <Tactility/lvgl/LvglSync.h>
-
-using tt::hal::sdcard::SpiSdCardDevice;
-
-std::shared_ptr<SdCardDevice> createSdCard() {
-    auto config = std::make_unique<SpiSdCardDevice::Config>(
-        GPIO_NUM_10,
-        GPIO_NUM_NC,
-        GPIO_NUM_NC,
-        GPIO_NUM_NC,
-        SdCardDevice::MountBehaviour::AtBoot,
-        std::make_shared<tt::Mutex>(tt::Mutex::Type::Recursive),
-        std::vector<gpio_num_t>(),
-        SPI2_HOST
-    );
-
-    auto sdcard = std::make_shared<SpiSdCardDevice>(
-        std::move(config)
-    );
-
-    return std::static_pointer_cast<SdCardDevice>(sdcard);
-}

Boards/cyd-jc8048w550c/Source/devices/SdCard.h

@@ -1,7 +0,0 @@
-#pragma once
-
-#include <Tactility/hal/sdcard/SdCardDevice.h>
-
-using tt::hal::sdcard::SdCardDevice;
-
-std::shared_ptr<SdCardDevice> createSdCard();

Boards/elecrow-crowpanel-advance-28/CMakeLists.txt

@@ -1,7 +0,0 @@
-file(GLOB_RECURSE SOURCE_FILES Source/*.c*)
-
-idf_component_register(
-    SRCS ${SOURCE_FILES}
-    INCLUDE_DIRS "Source"
-    REQUIRES Tactility FT5x06 ST7789 PwmBacklight driver
-)

Boards/elecrow-crowpanel-advance-28/Source/Configuration.cpp

@@ -1,145 +0,0 @@
-#include "PwmBacklight.h"
-#include "devices/Display.h"
-#include "devices/SdCard.h"
-
-#include <Tactility/hal/Configuration.h>
-#include <Tactility/lvgl/LvglSync.h>
-
-using namespace tt::hal;
-
-static bool initBoot() {
-    return driver::pwmbacklight::init(GPIO_NUM_38);
-}
-
-static DeviceVector createDevices() {
-    return {
-        createDisplay(),
-        createSdCard()
-    };
-}
-
-extern const Configuration hardwareConfiguration = {
-    .initBoot = initBoot,
-    .createDevices = createDevices,
-    .i2c = {
-        // There is only 1 (internal for touch, and also serves as "I2C-OUT" port)
-        // Note: You could repurpose 1 or more UART interfaces as I2C interfaces
-        i2c::Configuration {
-            .name = "Main",
-            .port = I2C_NUM_0,
-            .initMode = i2c::InitMode::ByTactility,
-            .isMutable = false,
-            .config = (i2c_config_t) {
-                .mode = I2C_MODE_MASTER,
-                .sda_io_num = GPIO_NUM_15,
-                .scl_io_num = GPIO_NUM_16,
-                .sda_pullup_en = true,
-                .scl_pullup_en = true,
-                .master = {
-                    .clk_speed = 400000
-                },
-                .clk_flags = 0
-            }
-        }
-    },
-    .spi {
-        // Display
-        spi::Configuration {
-            .device = SPI2_HOST,
-            .dma = SPI_DMA_DISABLED,
-            .config = {
-                .mosi_io_num = GPIO_NUM_39,
-                .miso_io_num = GPIO_NUM_NC,
-                .sclk_io_num = GPIO_NUM_42,
-                .quadwp_io_num = GPIO_NUM_NC,
-                .quadhd_io_num = GPIO_NUM_NC,
-                .data4_io_num = GPIO_NUM_NC,
-                .data5_io_num = GPIO_NUM_NC,
-                .data6_io_num = GPIO_NUM_NC,
-                .data7_io_num = GPIO_NUM_NC,
-                .data_io_default_level = false,
-                .max_transfer_sz = LCD_SPI_TRANSFER_SIZE_LIMIT,
-                .flags = 0,
-                .isr_cpu_id = ESP_INTR_CPU_AFFINITY_AUTO,
-                .intr_flags = 0
-            },
-            .initMode = spi::InitMode::ByTactility,
-            .isMutable = false,
-            .lock = tt::lvgl::getSyncLock() // esp_lvgl_port owns the lock for the display
-        },
-        // SD card
-        spi::Configuration {
-            .device = SPI3_HOST,
-            .dma = SPI_DMA_CH_AUTO,
-            .config = {
-                .mosi_io_num = GPIO_NUM_6,
-                .miso_io_num = GPIO_NUM_4,
-                .sclk_io_num = GPIO_NUM_5,
-                .quadwp_io_num = GPIO_NUM_NC,
-                .quadhd_io_num = GPIO_NUM_NC,
-                .data4_io_num = GPIO_NUM_NC,
-                .data5_io_num = GPIO_NUM_NC,
-                .data6_io_num = GPIO_NUM_NC,
-                .data7_io_num = GPIO_NUM_NC,
-                .data_io_default_level = false,
-                .max_transfer_sz = 32768,
-                .flags = 0,
-                .isr_cpu_id = ESP_INTR_CPU_AFFINITY_AUTO,
-                .intr_flags = 0
-            },
-            .initMode = spi::InitMode::ByTactility,
-            .isMutable = false,
-            .lock = nullptr // No custom lock needed
-        }
-    },
-    .uart {
-        // "UART0-IN"
-        uart::Configuration {
-            .name = "UART0",
-            .port = UART_NUM_1,
-            .rxPin = GPIO_NUM_44,
-            .txPin = GPIO_NUM_43,
-            .rtsPin = GPIO_NUM_NC,
-            .ctsPin = GPIO_NUM_NC,
-            .rxBufferSize = 1024,
-            .txBufferSize = 1024,
-            .config = {
-                .baud_rate = 115200,
-                .data_bits = UART_DATA_8_BITS,
-                .parity    = UART_PARITY_DISABLE,
-                .stop_bits = UART_STOP_BITS_1,
-                .flow_ctrl = UART_HW_FLOWCTRL_DISABLE,
-                .rx_flow_ctrl_thresh = 0,
-                .source_clk = UART_SCLK_DEFAULT,
-                .flags = {
-                    .allow_pd = 0,
-                    .backup_before_sleep = 0,
-                }
-            }
-        },
-        // "UART1-OUT"
-        uart::Configuration {
-            .name = "UART1",
-            .port = UART_NUM_2,
-            .rxPin = GPIO_NUM_18,
-            .txPin = GPIO_NUM_17,
-            .rtsPin = GPIO_NUM_NC,
-            .ctsPin = GPIO_NUM_NC,
-            .rxBufferSize = 1024,
-            .txBufferSize = 1024,
-            .config = {
-                .baud_rate = 115200,
-                .data_bits = UART_DATA_8_BITS,
-                .parity    = UART_PARITY_DISABLE,
-                .stop_bits = UART_STOP_BITS_1,
-                .flow_ctrl = UART_HW_FLOWCTRL_DISABLE,
-                .rx_flow_ctrl_thresh = 0,
-                .source_clk = UART_SCLK_DEFAULT,
-                .flags = {
-                    .allow_pd = 0,
-                    .backup_before_sleep = 0,
-                }
-            }
-        }
-    }
-};

Boards/elecrow-crowpanel-advance-28/Source/devices/Display.cpp

@@ -1,46 +0,0 @@
-#include "Display.h"
-
-#include <Ft5x06Touch.h>
-#include <PwmBacklight.h>
-#include <St7789Display.h>
-
-static std::shared_ptr<tt::hal::touch::TouchDevice> createTouch() {
-    // Note for future changes: Reset pin is 48 and interrupt pin is 47
-    auto configuration = std::make_unique<Ft5x06Touch::Configuration>(
-        I2C_NUM_0,
-        LCD_HORIZONTAL_RESOLUTION,
-        LCD_VERTICAL_RESOLUTION,
-        false,
-        false,
-        false
-    );
-
-    return std::make_shared<Ft5x06Touch>(std::move(configuration));
-}
-
-std::shared_ptr<tt::hal::display::DisplayDevice> createDisplay() {
-    St7789Display::Configuration panel_configuration = {
-        .horizontalResolution = LCD_HORIZONTAL_RESOLUTION,
-        .verticalResolution = LCD_VERTICAL_RESOLUTION,
-        .gapX = 0,
-        .gapY = 0,
-        .swapXY = false,
-        .mirrorX = false,
-        .mirrorY = false,
-        .invertColor = true,
-        .bufferSize = LCD_BUFFER_SIZE,
-        .touch = createTouch(),
-        .backlightDutyFunction = driver::pwmbacklight::setBacklightDuty,
-        .resetPin = GPIO_NUM_NC
-    };
-
-    auto spi_configuration = std::make_shared<St7789Display::SpiConfiguration>(St7789Display::SpiConfiguration {
-        .spiHostDevice = LCD_SPI_HOST,
-        .csPin = LCD_PIN_CS,
-        .dcPin = LCD_PIN_DC,
-        .pixelClockFrequency = 62'500'000,
-        .transactionQueueDepth = 10
-    });
-
-    return std::make_shared<St7789Display>(panel_configuration, spi_configuration);
-}

Boards/elecrow-crowpanel-advance-28/Source/devices/Display.h

@@ -1,17 +0,0 @@
-#pragma once
-
-#include <Tactility/hal/display/DisplayDevice.h>
-
-#include <driver/gpio.h>
-#include <driver/spi_common.h>
-
-constexpr auto LCD_SPI_HOST = SPI2_HOST;
-constexpr auto LCD_PIN_CS = GPIO_NUM_40;
-constexpr auto LCD_PIN_DC = GPIO_NUM_41; // RS
-constexpr auto LCD_HORIZONTAL_RESOLUTION = 240;
-constexpr auto LCD_VERTICAL_RESOLUTION = 320;
-constexpr auto LCD_BUFFER_HEIGHT = LCD_VERTICAL_RESOLUTION / 10;
-constexpr auto LCD_BUFFER_SIZE = LCD_HORIZONTAL_RESOLUTION * LCD_BUFFER_HEIGHT;
-constexpr auto LCD_SPI_TRANSFER_SIZE_LIMIT = LCD_BUFFER_SIZE * LV_COLOR_DEPTH / 8;
-
-std::shared_ptr<tt::hal::display::DisplayDevice> createDisplay();

Boards/elecrow-crowpanel-advance-28/Source/devices/SdCard.cpp

@@ -1,25 +0,0 @@
-#include "SdCard.h"
-
-#include <Tactility/lvgl/LvglSync.h>
-#include <Tactility/hal/sdcard/SpiSdCardDevice.h>
-
-using tt::hal::sdcard::SpiSdCardDevice;
-
-constexpr auto CROWPANEL_SDCARD_PIN_CS = GPIO_NUM_7;
-
-std::shared_ptr<SdCardDevice> createSdCard() {
-    auto configuration = std::make_unique<SpiSdCardDevice::Config>(
-        CROWPANEL_SDCARD_PIN_CS,
-        GPIO_NUM_NC,
-        GPIO_NUM_NC,
-        GPIO_NUM_NC,
-        SdCardDevice::MountBehaviour::AtBoot,
-        tt::lvgl::getSyncLock(),
-        std::vector<gpio_num_t>(),
-        SPI3_HOST
-    );
-
-    return std::make_shared<SpiSdCardDevice>(
-        std::move(configuration)
-    );
-}

Boards/elecrow-crowpanel-advance-28/Source/devices/SdCard.h

@@ -1,7 +0,0 @@
-#pragma once
-
-#include "Tactility/hal/sdcard/SdCardDevice.h"
-
-using tt::hal::sdcard::SdCardDevice;
-
-std::shared_ptr<SdCardDevice> createSdCard();

Boards/elecrow-crowpanel-advance-35/CMakeLists.txt

@@ -1,7 +0,0 @@
-file(GLOB_RECURSE SOURCE_FILES Source/*.c*)
-
-idf_component_register(
-    SRCS ${SOURCE_FILES}
-    INCLUDE_DIRS "Source"
-    REQUIRES Tactility esp_lvgl_port ILI9488 GT911 PwmBacklight driver
-)

Boards/elecrow-crowpanel-advance-35/Source/Configuration.cpp

@@ -1,147 +0,0 @@
-#include "devices/Display.h"
-#include "devices/SdCard.h"
-
-#include <Tactility/hal/Configuration.h>
-#include <Tactility/lvgl/LvglSync.h>
-#include <PwmBacklight.h>
-
-#define CROWPANEL_SPI_TRANSFER_SIZE_LIMIT (CROWPANEL_LCD_HORIZONTAL_RESOLUTION * CROWPANEL_LCD_SPI_TRANSFER_HEIGHT * (LV_COLOR_DEPTH / 8))
-
-using namespace tt::hal;
-
-static bool initBoot() {
-    return driver::pwmbacklight::init(GPIO_NUM_38);
-}
-
-static DeviceVector createDevices() {
-    return {
-        createDisplay(),
-        createSdCard()
-    };
-}
-
-extern const Configuration hardwareConfiguration = {
-    .initBoot = initBoot,
-    .createDevices = createDevices,
-    .i2c = {
-        // There is only 1 (internal for touch, and also serves as "I2C-OUT" port)
-        // Note: You could repurpose 1 or more UART interfaces as I2C interfaces
-        i2c::Configuration {
-            .name = "Main",
-            .port = I2C_NUM_0,
-            .initMode = i2c::InitMode::ByTactility,
-            .isMutable = false,
-            .config = (i2c_config_t) {
-                .mode = I2C_MODE_MASTER,
-                .sda_io_num = GPIO_NUM_15,
-                .scl_io_num = GPIO_NUM_16,
-                .sda_pullup_en = true,
-                .scl_pullup_en = true,
-                .master = {
-                    .clk_speed = 400000
-                },
-                .clk_flags = 0
-            }
-        }
-    },
-    .spi {
-        // Display
-        spi::Configuration {
-            .device = SPI2_HOST,
-            .dma = SPI_DMA_DISABLED,
-            .config = {
-                .mosi_io_num = GPIO_NUM_39,
-                .miso_io_num = GPIO_NUM_NC,
-                .sclk_io_num = GPIO_NUM_42,
-                .quadwp_io_num = GPIO_NUM_NC,
-                .quadhd_io_num = GPIO_NUM_NC,
-                .data4_io_num = GPIO_NUM_NC,
-                .data5_io_num = GPIO_NUM_NC,
-                .data6_io_num = GPIO_NUM_NC,
-                .data7_io_num = GPIO_NUM_NC,
-                .data_io_default_level = false,
-                .max_transfer_sz = CROWPANEL_SPI_TRANSFER_SIZE_LIMIT,
-                .flags = 0,
-                .isr_cpu_id = ESP_INTR_CPU_AFFINITY_AUTO,
-                .intr_flags = 0
-            },
-            .initMode = spi::InitMode::ByTactility,
-            .isMutable = false,
-            .lock = tt::lvgl::getSyncLock() // esp_lvgl_port owns the lock for the display
-        },
-        // SD card
-        spi::Configuration {
-            .device = SPI3_HOST,
-            .dma = SPI_DMA_CH_AUTO,
-            .config = {
-                .mosi_io_num = GPIO_NUM_6,
-                .miso_io_num = GPIO_NUM_4,
-                .sclk_io_num = GPIO_NUM_5,
-                .quadwp_io_num = GPIO_NUM_NC,
-                .quadhd_io_num = GPIO_NUM_NC,
-                .data4_io_num = GPIO_NUM_NC,
-                .data5_io_num = GPIO_NUM_NC,
-                .data6_io_num = GPIO_NUM_NC,
-                .data7_io_num = GPIO_NUM_NC,
-                .data_io_default_level = false,
-                .max_transfer_sz = 32768,
-                .flags = 0,
-                .isr_cpu_id = ESP_INTR_CPU_AFFINITY_AUTO,
-                .intr_flags = 0
-            },
-            .initMode = spi::InitMode::ByTactility,
-            .isMutable = false,
-            .lock = nullptr // No custom lock needed
-        }
-    },
-    .uart {
-        // "UART0-IN"
-        uart::Configuration {
-            .name = "UART0",
-            .port = UART_NUM_1,
-            .rxPin = GPIO_NUM_44,
-            .txPin = GPIO_NUM_43,
-            .rtsPin = GPIO_NUM_NC,
-            .ctsPin = GPIO_NUM_NC,
-            .rxBufferSize = 1024,
-            .txBufferSize = 1024,
-            .config = {
-                .baud_rate = 115200,
-                .data_bits = UART_DATA_8_BITS,
-                .parity    = UART_PARITY_DISABLE,
-                .stop_bits = UART_STOP_BITS_1,
-                .flow_ctrl = UART_HW_FLOWCTRL_DISABLE,
-                .rx_flow_ctrl_thresh = 0,
-                .source_clk = UART_SCLK_DEFAULT,
-                .flags = {
-                    .allow_pd = 0,
-                    .backup_before_sleep = 0,
-                }
-            }
-        },
-        // "UART1-OUT"
-        uart::Configuration {
-            .name = "UART1",
-            .port = UART_NUM_2,
-            .rxPin = GPIO_NUM_18,
-            .txPin = GPIO_NUM_17,
-            .rtsPin = GPIO_NUM_NC,
-            .ctsPin = GPIO_NUM_NC,
-            .rxBufferSize = 1024,
-            .txBufferSize = 1024,
-            .config = {
-                .baud_rate = 115200,
-                .data_bits = UART_DATA_8_BITS,
-                .parity    = UART_PARITY_DISABLE,
-                .stop_bits = UART_STOP_BITS_1,
-                .flow_ctrl = UART_HW_FLOWCTRL_DISABLE,
-                .rx_flow_ctrl_thresh = 0,
-                .source_clk = UART_SCLK_DEFAULT,
-                .flags = {
-                    .allow_pd = 0,
-                    .backup_before_sleep = 0,
-                }
-            }
-        }
-    }
-};