Update version to 0.6.0 (#400)

To avoid keeping track of a list that maps board project names to board ids.
Because of this change, we don't have to manually edit `boards.cmake` anymore when adding a new board.

.github/actions/build-simulator/action.yml

@@ -36,14 +36,16 @@ runs:
         WLR_LIBINPUT_NO_DEVICES: 1
         WAYLAND_DISPLAY: wayland-1
         GTK_USE_PORTAL: 0
-    - name: "Configure Project"
+    - name: Setup cmake
-      uses: threeal/cmake-action@v1.3.0
+      uses: jwlawson/actions-setup-cmake@v2
+      with:
+        cmake-version: '3.31.x'
     - name: "Prepare Project"
       shell: bash
       run: cmake -S ./ -B buildsim
     - name: "Build Tests"
       shell: bash
-      run: cmake --build buildsim --target AppSim
+      run: cmake --build buildsim --target FirmwareSim
     - name: 'Release'
       shell: bash
       run: Buildscripts/release-simulator.sh buildsim release/Simulator-${{ inputs.os_name }}-${{ inputs.platform_name }}

.github/workflows/build-firmware.yml

@@ -4,188 +4,51 @@ on:
     branches:
       - main
   pull_request:
-    types: [opened, synchronize, reopened]
+    types: [ opened, synchronize, reopened ]
 
 permissions: read-all
 
 jobs:
-  cyd-2432s024c:
+  build:
+    strategy:
+      matrix:
+        board: [
+          { id: cyd-2432s024c, arch: esp32 },
+          { id: cyd-2432s028r, arch: esp32 },
+          { id: cyd-2432s028rv3, arch: esp32 },
+          { id: cyd-e32r28t, arch: esp32 },
+          { id: cyd-e32r32p, arch: esp32 },
+          { id: cyd-2432s032c, arch: esp32 },
+          { id: cyd-jc2432w328c, arch: esp32 },
+          { id: cyd-8048s043c, arch: esp32s3 },
+          { id: cyd-jc8048w550c, arch: esp32s3 },
+          { id: cyd-4848s040c, arch: esp32s3 },
+          { id: elecrow-crowpanel-advance-28, arch: esp32s3 },
+          { id: elecrow-crowpanel-advance-35, arch: esp32s3 },
+          { id: elecrow-crowpanel-advance-50, arch: esp32s3 },
+          { id: elecrow-crowpanel-basic-28, arch: esp32 },
+          { id: elecrow-crowpanel-basic-35, arch: esp32 },
+          { id: elecrow-crowpanel-basic-50, arch: esp32s3 },
+          { id: lilygo-tdeck, arch: esp32s3 },
+          { id: lilygo-tdongle-s3, arch: esp32s3 },
+          { id: lilygo-tlora-pager, arch: esp32s3 },
+          { id: m5stack-cardputer, arch: esp32s3 },
+          { id: m5stack-cardputer-adv, arch: esp32s3 },
+          { id: m5stack-core2, arch: esp32 },
+          { id: m5stack-cores3, arch: esp32s3 },
+          { id: m5stack-stickc-plus, arch: esp32 },
+          { id: m5stack-stickc-plus2, arch: esp32 },
+          { id: unphone, arch: esp32s3 },
+          { id: waveshare-s3-touch-lcd-43, arch: esp32s3 },
+          { id: waveshare-s3-touch-lcd-147, arch: esp32s3 },
+          { id: waveshare-s3-touch-lcd-128, arch: esp32s3 },
+          { id: waveshare-s3-lcd-13, arch: esp32s3 }
+        ]
     runs-on: ubuntu-latest
     steps:
       - uses: actions/checkout@v4
       - name: "Build"
         uses: ./.github/actions/build-firmware
         with:
-          board_id: cyd-2432s024c
+          board_id: ${{ matrix.board.id }}
-          arch: esp32
+          arch: ${{ matrix.board.arch }}
-  cyd-2432s028r:
-    runs-on: ubuntu-latest
-    steps:
-      - uses: actions/checkout@v4
-      - name: "Build"
-        uses: ./.github/actions/build-firmware
-        with:
-          board_id: cyd-2432s028r
-          arch: esp32
-  cyd-e32r28t:
-    runs-on: ubuntu-latest
-    steps:
-      - uses: actions/checkout@v4
-      - name: "Build"
-        uses: ./.github/actions/build-firmware
-        with:
-          board_id: cyd-e32r28t
-          arch: esp32
-  cyd-2432s032c:
-    runs-on: ubuntu-latest
-    steps:
-      - uses: actions/checkout@v4
-      - name: "Build"
-        uses: ./.github/actions/build-firmware
-        with:
-          board_id: cyd-2432s032c
-          arch: esp32
-  cyd-jc2432w328c:
-    runs-on: ubuntu-latest
-    steps:
-      - uses: actions/checkout@v4
-      - name: "Build"
-        uses: ./.github/actions/build-firmware
-        with:
-          board_id: cyd-jc2432w328c
-          arch: esp32
-  cyd-8048s043c:
-    runs-on: ubuntu-latest
-    steps:
-      - uses: actions/checkout@v4
-      - name: "Build"
-        uses: ./.github/actions/build-firmware
-        with:
-          board_id: cyd-8048s043c
-          arch: esp32s3
-  cyd-jc8048w550c:
-    runs-on: ubuntu-latest
-    steps:
-      - uses: actions/checkout@v4
-      - name: "Build"
-        uses: ./.github/actions/build-firmware
-        with:
-          board_id: cyd-jc8048w550c
-          arch: esp32s3
-  cyd-4848s040c:
-    runs-on: ubuntu-latest
-    steps:
-      - uses: actions/checkout@v4
-      - name: "Build"
-        uses: ./.github/actions/build-firmware
-        with:
-          board_id: cyd-4848s040c
-          arch: esp32s3
-  elecrow-crowpanel-advance-28:
-    runs-on: ubuntu-latest
-    steps:
-      - uses: actions/checkout@v4
-      - name: "Build"
-        uses: ./.github/actions/build-firmware
-        with:
-          board_id: elecrow-crowpanel-advance-28
-          arch: esp32s3
-  elecrow-crowpanel-advance-35:
-    runs-on: ubuntu-latest
-    steps:
-      - uses: actions/checkout@v4
-      - name: "Build"
-        uses: ./.github/actions/build-firmware
-        with:
-          board_id: elecrow-crowpanel-advance-35
-          arch: esp32s3
-  elecrow-crowpanel-advance-50:
-    runs-on: ubuntu-latest
-    steps:
-      - uses: actions/checkout@v4
-      - name: "Build"
-        uses: ./.github/actions/build-firmware
-        with:
-          board_id: elecrow-crowpanel-advance-50
-          arch: esp32s3
-  elecrow-crowpanel-basic-28:
-    runs-on: ubuntu-latest
-    steps:
-      - uses: actions/checkout@v4
-      - name: "Build"
-        uses: ./.github/actions/build-firmware
-        with:
-          board_id: elecrow-crowpanel-basic-28
-          arch: esp32
-  elecrow-crowpanel-basic-35:
-    runs-on: ubuntu-latest
-    steps:
-      - uses: actions/checkout@v4
-      - name: "Build"
-        uses: ./.github/actions/build-firmware
-        with:
-          board_id: elecrow-crowpanel-basic-35
-          arch: esp32
-  elecrow-crowpanel-basic-50:
-    runs-on: ubuntu-latest
-    steps:
-      - uses: actions/checkout@v4
-      - name: "Build"
-        uses: ./.github/actions/build-firmware
-        with:
-          board_id: elecrow-crowpanel-basic-50
-          arch: esp32s3
-  lilygo-tdeck:
-    runs-on: ubuntu-latest
-    steps:
-      - uses: actions/checkout@v4
-      - name: "Build"
-        uses: ./.github/actions/build-firmware
-        with:
-          board_id: lilygo-tdeck
-          arch: esp32s3
-  lilygo-tlora-pager:
-    runs-on: ubuntu-latest
-    steps:
-      - uses: actions/checkout@v4
-      - name: "Build"
-        uses: ./.github/actions/build-firmware
-        with:
-          board_id: lilygo-tlora-pager
-          arch: esp32s3
-  m5stack-core2:
-    runs-on: ubuntu-latest
-    steps:
-      - uses: actions/checkout@v4
-      - name: "Build"
-        uses: ./.github/actions/build-firmware
-        with:
-          board_id: m5stack-core2
-          arch: esp32
-  m5stack-cores3:
-    runs-on: ubuntu-latest
-    steps:
-      - uses: actions/checkout@v4
-      - name: "Build"
-        uses: ./.github/actions/build-firmware
-        with:
-          board_id: m5stack-cores3
-          arch: esp32s3
-  unphone:
-    runs-on: ubuntu-latest
-    steps:
-      - uses: actions/checkout@v4
-      - name: "Build"
-        uses: ./.github/actions/build-firmware
-        with:
-          board_id: unphone
-          arch: esp32s3
-  waveshare-s3-touch-43:
-    runs-on: ubuntu-latest
-    steps:
-      - uses: actions/checkout@v4
-      - name: "Build"
-        uses: ./.github/actions/build-firmware
-        with:
-          board_id: waveshare-s3-touch-43
-          arch: esp32s3

.github/workflows/build-sdk.yml

@@ -4,26 +4,23 @@ on:
     branches:
       - main
   pull_request:
-    types: [opened, synchronize, reopened]
+    types: [ opened, synchronize, reopened ]
 
 permissions: read-all
 
 jobs:
-  esp32:
+  build:
+    strategy:
+      matrix:
+        board: [
+          { id: cyd-2432s028r, arch: esp32 },
+          { id: lilygo-tdeck, arch: esp32s3 },
+        ]
     runs-on: ubuntu-latest
     steps:
       - uses: actions/checkout@v4
       - name: "Build"
         uses: ./.github/actions/build-sdk
         with:
-          board_id: cyd-2432s024c
+          board_id: ${{ matrix.board.id }}
-          arch: esp32
+          arch: ${{ matrix.board.arch }}
-  esp32s3:
-    runs-on: ubuntu-latest
-    steps:
-      - uses: actions/checkout@v4
-      - name: "Build"
-        uses: ./.github/actions/build-sdk
-        with:
-          board_id: lilygo-tdeck
-          arch: esp32s3

.github/workflows/build-simulator.yml

@@ -5,9 +5,9 @@ on:
     branches:
       - main
   pull_request:
-    types: [opened, synchronize, reopened]
+    types: [ opened, synchronize, reopened ]
 jobs:
-  Build-Simulator-Linux:
+  Linux:
     runs-on: ubuntu-24.04
     steps:
       - uses: actions/checkout@v4
@@ -17,7 +17,7 @@ jobs:
           os_name: linux
           platform_name: amd64
           publish: true
-  Build-Simulator-macOS:
+  macOS:
     runs-on: macos-latest
     steps:
       - uses: actions/checkout@v4

.github/workflows/tests.yml

@@ -6,7 +6,7 @@ on:
   pull_request:
     types: [opened, synchronize, reopened]
 jobs:
-  Run:
+  run:
     runs-on: ubuntu-latest
     steps:
       - name: "Checkout repo"

.gitmodules

@@ -10,3 +10,9 @@
 [submodule "Libraries/SDL"]
 	path = Libraries/SDL
 	url = https://github.com/libsdl-org/SDL.git
+[submodule "Libraries/minitar/minitar"]
+	path = Libraries/minitar/minitar
+	url = https://github.com/ByteWelder/minitar.git
+[submodule "Libraries/cJSON/cJSON"]
+	path = Libraries/cJSON/cJSON
+	url = https://github.com/DaveGamble/cJSON.git

App/Source/Boards.h

@@ -1,80 +0,0 @@
-#pragma once
-#include <Tactility/hal/Configuration.h>
-
-#ifdef ESP_PLATFORM
-#include <sdkconfig.h>
-
-// Supported hardware:
-#if defined(CONFIG_TT_BOARD_LILYGO_TDECK)
-#include "LilygoTdeck.h"
-#define TT_BOARD_HARDWARE &lilygo_tdeck
-#elif defined(CONFIG_TT_BOARD_LILYGO_TLORA_PAGER)
-#include "LilygoTloraPager.h"
-#define TT_BOARD_HARDWARE &lilygo_tlora_pager
-#elif defined(CONFIG_TT_BOARD_CYD_2432S024C)
-#include "CYD2432S024C.h"
-#define TT_BOARD_HARDWARE &cyd_2432s024c_config
-#elif defined(CONFIG_TT_BOARD_CYD_2432S028R)
-#include "CYD2432S028R.h"
-#define TT_BOARD_HARDWARE &cyd_2432s028r_config
-#elif defined(CONFIG_TT_BOARD_CYD_E32R28T)
-#include "E32R28T.h"
-#define TT_BOARD_HARDWARE &cyd_e32r28t_config
-#elif defined(CONFIG_TT_BOARD_CYD_2432S032C)
-#include "CYD2432S032C.h"
-#define TT_BOARD_HARDWARE &cyd_2432S032c_config
-#elif (defined(CONFIG_TT_BOARD_ELECROW_CROWPANEL_ADVANCE_28))
-#define TT_BOARD_HARDWARE &crowpanel_advance_28
-#include "CrowPanelAdvance28.h"
-#elif (defined(CONFIG_TT_BOARD_ELECROW_CROWPANEL_ADVANCE_35))
-#define TT_BOARD_HARDWARE &crowpanel_advance_35
-#include "CrowPanelAdvance35.h"
-#elif (defined(CONFIG_TT_BOARD_ELECROW_CROWPANEL_ADVANCE_50))
-#define TT_BOARD_HARDWARE &crowpanel_advance_50
-#include "CrowPanelAdvance50.h"
-#elif (defined(CONFIG_TT_BOARD_ELECROW_CROWPANEL_BASIC_28))
-#define TT_BOARD_HARDWARE &crowpanel_basic_28
-#include "CrowPanelBasic28.h"
-#elif (defined(CONFIG_TT_BOARD_ELECROW_CROWPANEL_BASIC_35))
-#define TT_BOARD_HARDWARE &crowpanel_basic_35
-#include "CrowPanelBasic35.h"
-#elif (defined(CONFIG_TT_BOARD_ELECROW_CROWPANEL_BASIC_50))
-#define TT_BOARD_HARDWARE &crowpanel_basic_50
-#include "CrowPanelBasic50.h"
-#elif defined(CONFIG_TT_BOARD_M5STACK_CORE2)
-#include "M5stackCore2.h"
-#define TT_BOARD_HARDWARE &m5stack_core2
-#elif defined(CONFIG_TT_BOARD_M5STACK_CORES3)
-#include "M5stackCoreS3.h"
-#define TT_BOARD_HARDWARE &m5stack_cores3
-#elif defined(CONFIG_TT_BOARD_UNPHONE)
-#include "UnPhone.h"
-#define TT_BOARD_HARDWARE &unPhone
-#elif defined(CONFIG_TT_BOARD_CYD_JC2432W328C)
-#include "JC2432W328C.h"
-#define TT_BOARD_HARDWARE &cyd_jc2432w328c_config
-#elif defined(CONFIG_TT_BOARD_CYD_8048S043C)
-#include "CYD8048S043C.h"
-#define TT_BOARD_HARDWARE &cyd_8048s043c_config
-#elif defined(CONFIG_TT_BOARD_CYD_JC8048W550C)
-#include "JC8048W550C.h"
-#define TT_BOARD_HARDWARE &cyd_jc8048w550c_config
-#elif defined(CONFIG_TT_BOARD_CYD_4848S040C)
-#include "CYD4848S040C.h"
-#define TT_BOARD_HARDWARE &cyd_4848s040c_config
-#elif defined(CONFIG_TT_BOARD_WAVESHARE_S3_TOUCH_43)
-#include "WaveshareS3Touch43.h"
-#define TT_BOARD_HARDWARE &waveshare_s3_touch_43
-#else
-#define TT_BOARD_HARDWARE NULL
-#error Replace TT_BOARD_HARDWARE in main.c with your own. Or copy one of the ./sdkconfig.board.* files into ./sdkconfig.
-#endif
-
-#else // else simulator
-
-#include "Simulator.h"
-
-extern tt::hal::Configuration hardware;
-#define TT_BOARD_HARDWARE &hardware
-
-#endif // ESP_PLATFORM

App/Source/HelloWorld/HelloWorld.cpp

@@ -1,23 +0,0 @@
-#include <Tactility/app/AppManifest.h>
-#include <Tactility/lvgl/Toolbar.h>
-#include <lvgl.h>
-
-using namespace tt::app;
-
-class HelloWorldApp : public App {
-
-    void onShow(AppContext& context, lv_obj_t* parent) override {
-        lv_obj_t* toolbar = tt::lvgl::toolbar_create(parent, context);
-        lv_obj_align(toolbar, LV_ALIGN_TOP_MID, 0, 0);
-
-        lv_obj_t* label = lv_label_create(parent);
-        lv_label_set_text(label, "Hello, world!");
-        lv_obj_align(label, LV_ALIGN_CENTER, 0, 0);
-    }
-};
-
-extern const AppManifest hello_world_app = {
-    .id = "HelloWorld",
-    .name = "Hello World",
-    .createApp = create<HelloWorldApp>
-};

Boards/CYD-2432S024C/Source/CYD2432S024C.h

@@ -1,6 +0,0 @@
-#pragma once
-
-#include <Tactility/hal/Configuration.h>
-
-// Capacitive touch version of the 2.4" yellow board
-extern const tt::hal::Configuration cyd_2432s024c_config;

Boards/CYD-2432S024C/Source/devices/Display.cpp

@@ -1,36 +0,0 @@
-#include "Display.h"
-#include "Cst816Touch.h"
-
-#include <Ili934xDisplay.h>
-#include <PwmBacklight.h>
-
-static std::shared_ptr<tt::hal::touch::TouchDevice> createTouch() {
-    // Note: GPIO 25 for reset and GPIO 21 for interrupt?
-    auto configuration = std::make_unique<Cst816sTouch::Configuration>(
-        I2C_NUM_0,
-        240,
-        320
-    );
-
-    return std::make_shared<Cst816sTouch>(std::move(configuration));
-}
-
-std::shared_ptr<tt::hal::display::DisplayDevice> createDisplay() {
-
-    auto touch = createTouch();
-
-    auto configuration = std::make_unique<Ili934xDisplay::Configuration>(
-        TWODOTFOUR_LCD_SPI_HOST,
-        TWODOTFOUR_LCD_PIN_CS,
-        TWODOTFOUR_LCD_PIN_DC,
-        TWODOTFOUR_LCD_HORIZONTAL_RESOLUTION,
-        TWODOTFOUR_LCD_VERTICAL_RESOLUTION,
-        touch
-    );
-
-    configuration->mirrorX = true;
-    configuration->backlightDutyFunction = driver::pwmbacklight::setBacklightDuty;
-
-    auto display = std::make_shared<Ili934xDisplay>(std::move(configuration));
-    return std::reinterpret_pointer_cast<tt::hal::display::DisplayDevice>(display);
-}

Boards/CYD-2432S024C/Source/devices/Display.h

@@ -1,17 +0,0 @@
-#pragma once
-
-#include "Tactility/hal/display/DisplayDevice.h"
-#include <memory>
-
-#define TWODOTFOUR_LCD_PIN_BACKLIGHT GPIO_NUM_27
-
-// Display
-#define TWODOTFOUR_LCD_SPI_HOST SPI2_HOST
-#define TWODOTFOUR_LCD_HORIZONTAL_RESOLUTION 240
-#define TWODOTFOUR_LCD_VERTICAL_RESOLUTION 320
-#define TWODOTFOUR_LCD_DRAW_BUFFER_HEIGHT (TWODOTFOUR_LCD_VERTICAL_RESOLUTION / 10)
-#define TWODOTFOUR_LCD_DRAW_BUFFER_SIZE (TWODOTFOUR_LCD_HORIZONTAL_RESOLUTION * TWODOTFOUR_LCD_DRAW_BUFFER_HEIGHT)
-#define TWODOTFOUR_LCD_PIN_CS GPIO_NUM_15
-#define TWODOTFOUR_LCD_PIN_DC GPIO_NUM_2
-
-std::shared_ptr<tt::hal::display::DisplayDevice> createDisplay();

Boards/CYD-2432S028R/Source/CYD2432S028R.h

@@ -1,6 +0,0 @@
-#pragma once
-
-#include <Tactility/hal/Configuration.h>
-
-// Resistive touch version of the 2.8" yellow board
-extern const tt::hal::Configuration cyd_2432s028r_config;

Boards/CYD-2432S028R/Source/devices/Display.cpp

@@ -1,54 +0,0 @@
-#include "Display.h"
-#include "Xpt2046SoftSpi.h"
-#include <Ili934xDisplay.h>
-#include <PwmBacklight.h>
-
-constexpr auto* TAG = "CYD";
-
-static std::shared_ptr<tt::hal::touch::TouchDevice> createTouch() {
-    auto configuration = std::make_unique<Xpt2046SoftSpi::Configuration>(
-        CYD_TOUCH_MOSI_PIN,
-        CYD_TOUCH_MISO_PIN,
-        CYD_TOUCH_SCK_PIN,
-        CYD_TOUCH_CS_PIN,
-        CYD2432S028R_LCD_HORIZONTAL_RESOLUTION, // 240
-        CYD2432S028R_LCD_VERTICAL_RESOLUTION, // 320
-        false, // swapXY
-        true, // mirrorX
-        false // mirrorY
-    );
-
-    // Allocate the driver
-    auto touch = std::make_shared<Xpt2046SoftSpi>(std::move(configuration));
-    
-    // Start the driver
-    if (!touch->start()) {
-        ESP_LOGE(TAG, "Touch driver start failed");
-        return nullptr;
-    }
-
-    return touch;
-}
-
-std::shared_ptr<tt::hal::display::DisplayDevice> createDisplay() {
-    auto touch = createTouch();
-
-    auto configuration = std::make_unique<Ili934xDisplay::Configuration>(
-        CYD2432S028R_LCD_SPI_HOST,
-        CYD2432S028R_LCD_PIN_CS,
-        CYD2432S028R_LCD_PIN_DC,
-        CYD2432S028R_LCD_HORIZONTAL_RESOLUTION,
-        CYD2432S028R_LCD_VERTICAL_RESOLUTION,
-        touch,
-        false, // swapXY
-        true, // mirrorX
-        false, // mirrorY
-        false,
-        CYD2432S028R_LCD_DRAW_BUFFER_SIZE
-    );
-
-    configuration->backlightDutyFunction = driver::pwmbacklight::setBacklightDuty;
-
-    auto display = std::make_shared<Ili934xDisplay>(std::move(configuration));
-    return std::reinterpret_pointer_cast<tt::hal::display::DisplayDevice>(display);
-}

Boards/CYD-2432S028R/Source/devices/Display.h

@@ -1,22 +0,0 @@
-#pragma once
-
-#include "Tactility/hal/display/DisplayDevice.h"
-#include <memory>
-
-// Display
-#define CYD2432S028R_LCD_SPI_HOST SPI2_HOST
-#define CYD2432S028R_LCD_HORIZONTAL_RESOLUTION 240
-#define CYD2432S028R_LCD_VERTICAL_RESOLUTION 320
-#define CYD2432S028R_LCD_DRAW_BUFFER_HEIGHT (CYD2432S028R_LCD_VERTICAL_RESOLUTION / 10)
-#define CYD2432S028R_LCD_DRAW_BUFFER_SIZE (CYD2432S028R_LCD_HORIZONTAL_RESOLUTION * CYD2432S028R_LCD_DRAW_BUFFER_HEIGHT)
-#define CYD2432S028R_LCD_PIN_CS GPIO_NUM_15
-#define CYD2432S028R_LCD_PIN_DC GPIO_NUM_2
-
-// Touch (Software SPI)
-#define CYD_TOUCH_MISO_PIN GPIO_NUM_39
-#define CYD_TOUCH_MOSI_PIN GPIO_NUM_32
-#define CYD_TOUCH_SCK_PIN GPIO_NUM_25
-#define CYD_TOUCH_CS_PIN GPIO_NUM_33
-#define CYD_TOUCH_IRQ_PIN GPIO_NUM_36
-
-std::shared_ptr<tt::hal::display::DisplayDevice> createDisplay();

Boards/CYD-2432S032C/Source/CYD2432S032C.h

@@ -1,6 +0,0 @@
-#pragma once
-
-#include <Tactility/hal/Configuration.h>
-
-// Capacitive touch version of the 2.4" yellow board
-extern const tt::hal::Configuration cyd_2432S032c_config;

Boards/CYD-2432S032C/Source/devices/Display.cpp

@@ -1,40 +0,0 @@
-#include "Display.h"
-
-#include <Gt911Touch.h>
-#include <Ili934xDisplay.h>
-#include <PwmBacklight.h>
-
-static std::shared_ptr<tt::hal::touch::TouchDevice> createTouch() {
-    auto configuration = std::make_unique<Gt911Touch::Configuration>(
-        I2C_NUM_0,
-        240,
-        320
-    );
-
-    return std::make_shared<Gt911Touch>(std::move(configuration));
-}
-
-std::shared_ptr<tt::hal::display::DisplayDevice> createDisplay() {
-
-    auto touch = createTouch();
-
-    auto configuration = std::make_unique<Ili934xDisplay::Configuration>(
-        SPI2_HOST,
-        GPIO_NUM_15,
-        GPIO_NUM_2,
-        240,
-        320,
-        touch,
-        true,
-        true,
-        true,
-        true,
-        0,
-        LCD_RGB_ELEMENT_ORDER_RGB
-    );
-
-    configuration->backlightDutyFunction = driver::pwmbacklight::setBacklightDuty;
-
-    auto display = std::make_shared<Ili934xDisplay>(std::move(configuration));
-    return std::reinterpret_pointer_cast<tt::hal::display::DisplayDevice>(display);
-}

Boards/CYD-4848S040C/Source/CYD4848S040C.h

@@ -1,6 +0,0 @@
-#pragma once
-
-#include <Tactility/hal/Configuration.h>
-
-// Capacitive touch version of the 4" square yellow board
-extern const tt::hal::Configuration cyd_4848s040c_config;

Boards/CYD-8048S043C/Source/CYD8048S043C.h

@@ -1,6 +0,0 @@
-#pragma once
-
-#include <Tactility/hal/Configuration.h>
-
-// Capacitive touch version of the 4.3" yellow board
-extern const tt::hal::Configuration cyd_8048s043c_config;

Boards/CYD-E32R28T/Source/E32R28T.h

@@ -1,6 +0,0 @@
-#pragma once
-
-#include <Tactility/hal/Configuration.h>
-
-// Resistive touch version of the waveshare 2.8" yellow board
-extern const tt::hal::Configuration cyd_e32r28t_config;

Boards/CYD-E32R28T/Source/devices/Display.cpp

@@ -1,41 +0,0 @@
-#include "Display.h"
-
-#include <Xpt2046SoftSpi.h>
-#include <Ili934xDisplay.h>
-#include <PwmBacklight.h>
-#include <Tactility/hal/touch/TouchDevice.h>
-
-static std::shared_ptr<tt::hal::touch::TouchDevice> createTouch() {
-    auto config = std::make_unique<Xpt2046SoftSpi::Configuration>(
-        CYD_TOUCH_MOSI_PIN,
-        CYD_TOUCH_MISO_PIN,
-        CYD_TOUCH_SCK_PIN,
-        CYD_TOUCH_CS_PIN,
-        CYD_DISPLAY_HORIZONTAL_RESOLUTION,
-        CYD_DISPLAY_VERTICAL_RESOLUTION,
-        false,
-        true,
-        false
-    );
-
-    return std::make_shared<Xpt2046SoftSpi>(std::move(config));
-}
-
-std::shared_ptr<tt::hal::display::DisplayDevice> createDisplay() {
-    auto configuration = std::make_unique<Ili934xDisplay::Configuration>(
-        CYD_DISPLAY_SPI_HOST,
-        CYD_DISPLAY_PIN_CS,
-        CYD_DISPLAY_PIN_DC,
-        CYD_DISPLAY_HORIZONTAL_RESOLUTION,
-        CYD_DISPLAY_VERTICAL_RESOLUTION,
-        createTouch(),
-        false,
-        true,
-        false,
-        false,
-        0,
-        LCD_RGB_ELEMENT_ORDER_BGR
-    );
-    configuration->backlightDutyFunction = driver::pwmbacklight::setBacklightDuty;
-    return std::make_shared<Ili934xDisplay>(std::move(configuration));
-}

Boards/CYD-E32R28T/Source/devices/Display.h

@@ -1,25 +0,0 @@
-#pragma once
-
-#include <Tactility/hal/display/DisplayDevice.h>
-#include <memory>
-
-// Display
-#define CYD_DISPLAY_SPI_HOST SPI2_HOST
-#define CYD_DISPLAY_PIN_CS GPIO_NUM_15
-#define CYD_DISPLAY_PIN_DC GPIO_NUM_2
-#define CYD_DISPLAY_HORIZONTAL_RESOLUTION 240
-#define CYD_DISPLAY_VERTICAL_RESOLUTION 320
-#define CYD_DISPLAY_DRAW_BUFFER_HEIGHT (CYD_DISPLAY_VERTICAL_RESOLUTION / 10)
-#define CYD_DISPLAY_DRAW_BUFFER_SIZE (CYD_DISPLAY_HORIZONTAL_RESOLUTION * CYD_DISPLAY_DRAW_BUFFER_HEIGHT)
-
-// Touch (Software SPI)
-#define CYD_TOUCH_MISO_PIN GPIO_NUM_39
-#define CYD_TOUCH_MOSI_PIN GPIO_NUM_32
-#define CYD_TOUCH_SCK_PIN GPIO_NUM_25
-#define CYD_TOUCH_CS_PIN GPIO_NUM_33
-#define CYD_TOUCH_IRQ_PIN GPIO_NUM_36
-
-// Backlight
-#define CYD_BACKLIGHT_PIN GPIO_NUM_21
-
-std::shared_ptr<tt::hal::display::DisplayDevice> createDisplay();

Boards/CYD-JC2432W328C/Source/JC2432W328C.h

@@ -1,6 +0,0 @@
-#pragma once
-
-#include <Tactility/hal/Configuration.h>
-
-// Capacitive touch version of the 2.8" yellow board
-extern const tt::hal::Configuration cyd_jc2432w328c_config;

Boards/CYD-JC2432W328C/Source/devices/Display.h

@@ -1,18 +0,0 @@
-#pragma once
-
-#include "Tactility/hal/display/DisplayDevice.h"
-#include <memory>
-
-// Display backlight (PWM)
-#define JC2432W328C_LCD_PIN_BACKLIGHT GPIO_NUM_27
-
-// Display
-#define JC2432W328C_LCD_SPI_HOST SPI2_HOST
-#define JC2432W328C_LCD_HORIZONTAL_RESOLUTION 240
-#define JC2432W328C_LCD_VERTICAL_RESOLUTION 320
-#define JC2432W328C_LCD_DRAW_BUFFER_HEIGHT (JC2432W328C_LCD_VERTICAL_RESOLUTION / 10)
-#define JC2432W328C_LCD_DRAW_BUFFER_SIZE (JC2432W328C_LCD_HORIZONTAL_RESOLUTION * JC2432W328C_LCD_DRAW_BUFFER_HEIGHT)
-#define JC2432W328C_LCD_PIN_CS GPIO_NUM_15
-#define JC2432W328C_LCD_PIN_DC GPIO_NUM_2
-
-std::shared_ptr<tt::hal::display::DisplayDevice> createDisplay();

Boards/CYD-JC8048W550C/Source/JC8048W550C.h

@@ -1,6 +0,0 @@
-#pragma once
-
-#include <Tactility/hal/Configuration.h>
-
-// Capacitive touch version of the 5" black board
-extern const tt::hal::Configuration cyd_jc8048w550c_config;

Boards/ElecrowCrowpanelAdvance28/Source/CrowPanelAdvance28.h

@@ -1,5 +0,0 @@
-#pragma once
-
-#include <Tactility/hal/Configuration.h>
-
-extern const tt::hal::Configuration crowpanel_advance_28;

Boards/ElecrowCrowpanelAdvance28/Source/devices/Display.cpp

@@ -1,41 +0,0 @@
-#include "Display.h"
-
-#include <Ft5x06Touch.h>
-#include <PwmBacklight.h>
-#include <St7789Display.h>
-
-static std::shared_ptr<tt::hal::touch::TouchDevice> createTouch() {
-    // Note for future changes: Reset pin is 48 and interrupt pin is 47
-    auto configuration = std::make_unique<Ft5x06Touch::Configuration>(
-        I2C_NUM_0,
-        240,
-        320,
-        false,
-        false,
-        false
-    );
-
-    return std::make_shared<Ft5x06Touch>(std::move(configuration));
-}
-
-std::shared_ptr<tt::hal::display::DisplayDevice> createDisplay() {
-    auto touch = createTouch();
-
-    auto configuration = std::make_unique<St7789Display::Configuration>(
-        CROWPANEL_LCD_SPI_HOST,
-        CROWPANEL_LCD_PIN_CS,
-        CROWPANEL_LCD_PIN_DC,
-        240,
-        320,
-        touch,
-        false,
-        false,
-        false,
-        true
-    );
-
-    configuration->backlightDutyFunction = driver::pwmbacklight::setBacklightDuty;
-
-    auto display = std::make_shared<St7789Display>(std::move(configuration));
-    return std::reinterpret_pointer_cast<tt::hal::display::DisplayDevice>(display);
-}

Boards/ElecrowCrowpanelAdvance28/Source/devices/Display.h

@@ -1,12 +0,0 @@
-#pragma once
-
-#include <Tactility/hal/display/DisplayDevice.h>
-
-#define CROWPANEL_LCD_SPI_HOST SPI2_HOST
-#define CROWPANEL_LCD_PIN_CS GPIO_NUM_40
-#define CROWPANEL_LCD_PIN_DC GPIO_NUM_41 // RS
-#define CROWPANEL_LCD_HORIZONTAL_RESOLUTION 320
-#define CROWPANEL_LCD_VERTICAL_RESOLUTION 240
-#define CROWPANEL_LCD_SPI_TRANSFER_HEIGHT (CROWPANEL_LCD_VERTICAL_RESOLUTION / 10)
-
-std::shared_ptr<tt::hal::display::DisplayDevice> createDisplay();

Boards/ElecrowCrowpanelAdvance35/Source/CrowPanelAdvance35.h

@@ -1,5 +0,0 @@
-#pragma once
-
-#include <Tactility/hal/Configuration.h>
-
-extern const tt::hal::Configuration crowpanel_advance_35;

Boards/ElecrowCrowpanelAdvance50/Source/CrowPanelAdvance50.h

@@ -1,5 +0,0 @@
-#pragma once
-
-#include <Tactility/hal/Configuration.h>
-
-extern const tt::hal::Configuration crowpanel_advance_50;

Boards/ElecrowCrowpanelBasic28/Source/CrowPanelBasic28.h

@@ -1,5 +0,0 @@
-#pragma once
-
-#include <Tactility/hal/Configuration.h>
-
-extern const tt::hal::Configuration crowpanel_basic_28;

Boards/ElecrowCrowpanelBasic28/Source/devices/Display.cpp

@@ -1,39 +0,0 @@
-#include "Display.h"
-
-#include <Ili934xDisplay.h>
-#include <Xpt2046Touch.h>
-
-#include <PwmBacklight.h>
-
-std::shared_ptr<Xpt2046Touch> createTouch() {
-    auto configuration = std::make_unique<Xpt2046Touch::Configuration>(
-        CROWPANEL_LCD_SPI_HOST,
-        CROWPANEL_TOUCH_PIN_CS,
-        240,
-        320,
-        false,
-        true,
-        false
-    );
-
-    return std::make_shared<Xpt2046Touch>(std::move(configuration));
-}
-
-std::shared_ptr<tt::hal::display::DisplayDevice> createDisplay() {
-    auto touch = createTouch();
-
-    auto configuration = std::make_unique<Ili934xDisplay::Configuration>(
-        CROWPANEL_LCD_SPI_HOST,
-        CROWPANEL_LCD_PIN_CS,
-        CROWPANEL_LCD_PIN_DC,
-        240,
-        320,
-        touch
-    );
-
-    configuration->mirrorX = true;
-    configuration->backlightDutyFunction = driver::pwmbacklight::setBacklightDuty;
-
-    auto display = std::make_shared<Ili934xDisplay>(std::move(configuration));
-    return std::reinterpret_pointer_cast<tt::hal::display::DisplayDevice>(display);
-}

Boards/ElecrowCrowpanelBasic28/Source/devices/Display.h

@@ -1,13 +0,0 @@
-#pragma once
-
-#include <Tactility/hal/display/DisplayDevice.h>
-
-#define CROWPANEL_LCD_SPI_HOST SPI2_HOST
-#define CROWPANEL_LCD_PIN_CS GPIO_NUM_15
-#define CROWPANEL_TOUCH_PIN_CS GPIO_NUM_33
-#define CROWPANEL_LCD_PIN_DC GPIO_NUM_2 // RS
-#define CROWPANEL_LCD_HORIZONTAL_RESOLUTION 320
-#define CROWPANEL_LCD_VERTICAL_RESOLUTION 240
-#define CROWPANEL_LCD_SPI_TRANSFER_HEIGHT (CROWPANEL_LCD_VERTICAL_RESOLUTION / 10)
-
-std::shared_ptr<tt::hal::display::DisplayDevice> createDisplay();

Boards/ElecrowCrowpanelBasic35/Source/CrowPanelBasic35.h

@@ -1,5 +0,0 @@
-#pragma once
-
-#include <Tactility/hal/Configuration.h>
-
-extern const tt::hal::Configuration crowpanel_basic_35;

Boards/ElecrowCrowpanelBasic50/Source/CrowPanelBasic50.h

@@ -1,5 +0,0 @@
-#pragma once
-
-#include <Tactility/hal/Configuration.h>
-
-extern const tt::hal::Configuration crowpanel_basic_50;

Boards/LilygoTLoraPager/Source/LilygoTloraPager.h

@@ -1,5 +0,0 @@
-#pragma once
-
-#include <Tactility/hal/Configuration.h>
-
-extern const tt::hal::Configuration lilygo_tlora_pager;

Boards/LilygoTdeck/Source/LilygoTdeck.h

@@ -1,5 +0,0 @@
-#pragma once
-
-#include <Tactility/hal/Configuration.h>
-
-extern const tt::hal::Configuration lilygo_tdeck;

Boards/LilygoTdeck/Source/devices/Display.cpp

@@ -1,48 +0,0 @@
-#include "Display.h"
-
-#include <Gt911Touch.h>
-#include <PwmBacklight.h>
-#include <St7789Display.h>
-
-#define TDECK_LCD_SPI_HOST SPI2_HOST
-#define TDECK_LCD_PIN_CS GPIO_NUM_12
-#define TDECK_LCD_PIN_DC GPIO_NUM_11 // RS
-#define TDECK_LCD_HORIZONTAL_RESOLUTION 320
-#define TDECK_LCD_VERTICAL_RESOLUTION 240
-#define TDECK_LCD_SPI_TRANSFER_HEIGHT (TDECK_LCD_VERTICAL_RESOLUTION / 10)
-
-static std::shared_ptr<tt::hal::touch::TouchDevice> createTouch() {
-    // Note for future changes: Reset pin is 48 and interrupt pin is 47
-    auto configuration = std::make_unique<Gt911Touch::Configuration>(
-        I2C_NUM_0,
-        240,
-        320,
-        true,
-        true,
-        false
-    );
-
-    return std::make_shared<Gt911Touch>(std::move(configuration));
-}
-
-std::shared_ptr<tt::hal::display::DisplayDevice> createDisplay() {
-    auto touch = createTouch();
-
-    auto configuration = std::make_unique<St7789Display::Configuration>(
-        TDECK_LCD_SPI_HOST,
-        TDECK_LCD_PIN_CS,
-        TDECK_LCD_PIN_DC,
-        320,
-        240,
-        touch,
-        true,
-        true,
-        false,
-        true
-    );
-
-    configuration->backlightDutyFunction = driver::pwmbacklight::setBacklightDuty;
-
-    auto display = std::make_shared<St7789Display>(std::move(configuration));
-    return std::reinterpret_pointer_cast<tt::hal::display::DisplayDevice>(display);
-}

Boards/M5stackCore2/Source/InitBoot.cpp

@@ -1,51 +0,0 @@
-#include "axp192/axp192.h"
-
-#include <Tactility/Log.h>
-#include <Tactility/hal/i2c/I2c.h>
-#include <Tactility/CoreDefines.h>
-
-#include <driver/i2c.h>
-#include <driver/spi_master.h>
-
-constexpr auto* TAG = "Core2";
-
-axp192_t axpDevice;
-
-static int32_t axpI2cRead(TT_UNUSED void* handle, uint8_t address, uint8_t reg, uint8_t* buffer, uint16_t size) {
-    if (tt::hal::i2c::masterReadRegister(I2C_NUM_0, address, reg, buffer, size, 50 / portTICK_PERIOD_MS)) {
-        return AXP192_OK;
-    } else {
-        return 1;
-    }
-}
-
-static int32_t axpI2cWrite(TT_UNUSED void* handle, uint8_t address, uint8_t reg, const uint8_t* buffer, uint16_t size) {
-    if (tt::hal::i2c::masterWriteRegister(I2C_NUM_0, address, reg, buffer, size, 50 / portTICK_PERIOD_MS)) {
-        return AXP192_OK;
-    } else {
-        return 1;
-    }
-}
-
-void initAxp() {
-    axpDevice.read = axpI2cRead;
-    axpDevice.write = axpI2cWrite;
-
-    axp192_ioctl(&axpDevice, AXP192_LDO2_SET_VOLTAGE, 3300); // LCD + SD
-    axp192_ioctl(&axpDevice, AXP192_LDO3_SET_VOLTAGE, 0); // VIB_MOTOR STOP
-    axp192_ioctl(&axpDevice, AXP192_DCDC3_SET_VOLTAGE, 3300);
-
-    axp192_ioctl(&axpDevice, AXP192_LDO2_ENABLE);
-    axp192_ioctl(&axpDevice, AXP192_LDO3_DISABLE);
-    axp192_ioctl(&axpDevice, AXP192_DCDC3_ENABLE);
-
-    axp192_write(&axpDevice, AXP192_PWM1_DUTY_CYCLE_2, 255); // PWM 255 (LED OFF)
-    axp192_write(&axpDevice, AXP192_GPIO1_CONTROL, 0x02); // GPIO1 PWM
-    // TODO: We could charge at 390mA according to the M5Unified code, but the AXP driver in M5Unified limits to 132mA, so it's unclear what the AXP supports.
-}
-
-bool initBoot() {
-    TT_LOG_I(TAG, "initBoot");
-    initAxp();
-    return true;
-}

Boards/M5stackCore2/Source/InitBoot.h

@@ -1,3 +0,0 @@
-#pragma once
-
-bool initBoot();

Boards/M5stackCore2/Source/M5stackCore2.h

@@ -1,5 +0,0 @@
-#pragma once
-
-#include <Tactility/hal/Configuration.h>
-
-extern const tt::hal::Configuration m5stack_core2;

Boards/M5stackCore2/Source/devices/Core2Power.h

@@ -1,26 +0,0 @@
-#pragma once
-
-#include "Tactility/hal/power/PowerDevice.h"
-#include <memory>
-
-using tt::hal::power::PowerDevice;
-
-class Core2Power : public PowerDevice {
-
-public:
-
-    Core2Power() = default;
-    ~Core2Power() override = default;
-
-    std::string getName() const final { return "AXP192 Power"; }
-    std::string getDescription() const final { return "Power management via I2C"; }
-
-    bool supportsMetric(MetricType type) const override;
-    bool getMetric(MetricType type, MetricData& data) override;
-
-    bool supportsChargeControl() const override { return true; }
-    bool isAllowedToCharge() const override;
-    void setAllowedToCharge(bool canCharge) override;
-};
-
-std::shared_ptr<PowerDevice> createPower();

Boards/M5stackCore2/Source/devices/Display.cpp

@@ -1,36 +0,0 @@
-#include "Display.h"
-
-#include <Ft6x36Touch.h>
-#include <Ili934xDisplay.h>
-
-std::shared_ptr<tt::hal::touch::TouchDevice> createTouch() {
-    auto configuration = std::make_unique<Ft6x36Touch::Configuration>(
-        I2C_NUM_0,
-        GPIO_NUM_39,
-        CORE2_LCD_HORIZONTAL_RESOLUTION,
-        CORE2_LCD_VERTICAL_RESOLUTION
-    );
-
-    auto touch = std::make_shared<Ft6x36Touch>(std::move(configuration));
-    return std::reinterpret_pointer_cast<tt::hal::touch::TouchDevice>(touch);
-}
-
-std::shared_ptr<tt::hal::display::DisplayDevice> createDisplay() {
-    auto touch = createTouch();
-
-    auto configuration = std::make_unique<Ili934xDisplay::Configuration>(
-        CORE2_LCD_SPI_HOST,
-        CORE2_LCD_PIN_CS,
-        CORE2_LCD_PIN_DC,
-        CORE2_LCD_HORIZONTAL_RESOLUTION,
-        CORE2_LCD_VERTICAL_RESOLUTION,
-        touch,
-        false,
-        false,
-        false,
-        true
-    );
-
-    auto display = std::make_shared<Ili934xDisplay>(std::move(configuration));
-    return std::reinterpret_pointer_cast<tt::hal::display::DisplayDevice>(display);
-}

Boards/M5stackCore2/Source/devices/Display.h

@@ -1,14 +0,0 @@
-#pragma once
-
-#include "Tactility/hal/display/DisplayDevice.h"
-#include <memory>
-
-#define CORE2_LCD_SPI_HOST SPI2_HOST
-#define CORE2_LCD_PIN_CS GPIO_NUM_5
-#define CORE2_LCD_PIN_DC GPIO_NUM_15
-#define CORE2_LCD_HORIZONTAL_RESOLUTION 320
-#define CORE2_LCD_VERTICAL_RESOLUTION 240
-#define CORE2_LCD_DRAW_BUFFER_HEIGHT (CORE2_LCD_VERTICAL_RESOLUTION / 10)
-#define CORE2_LCD_DRAW_BUFFER_SIZE (CORE2_LCD_HORIZONTAL_RESOLUTION * CORE2_LCD_DRAW_BUFFER_HEIGHT)
-
-std::shared_ptr<tt::hal::display::DisplayDevice> createDisplay();

Boards/M5stackCoreS3/Source/M5stackCoreS3.h

@@ -1,5 +0,0 @@
-#pragma once
-
-#include <Tactility/hal/Configuration.h>
-
-extern const tt::hal::Configuration m5stack_cores3;

Boards/M5stackCoreS3/Source/devices/Display.h

@@ -1,14 +0,0 @@
-#pragma once
-
-#include <Tactility/hal/display/DisplayDevice.h>
-
-// Display
-#define CORES3_LCD_SPI_HOST SPI3_HOST
-#define CORES3_LCD_PIN_CS GPIO_NUM_3
-#define CORES3_LCD_PIN_DC GPIO_NUM_35
-#define CORES3_LCD_HORIZONTAL_RESOLUTION 320
-#define CORES3_LCD_VERTICAL_RESOLUTION 240
-#define CORES3_LCD_DRAW_BUFFER_HEIGHT (CORES3_LCD_VERTICAL_RESOLUTION / 10)
-#define CORES3_LCD_DRAW_BUFFER_SIZE (CORES3_LCD_HORIZONTAL_RESOLUTION * CORES3_LCD_DRAW_BUFFER_HEIGHT)
-
-std::shared_ptr<tt::hal::display::DisplayDevice> createDisplay();

Boards/UnPhone/Source/UnPhone.h

@@ -1,5 +0,0 @@
-#pragma once
-
-#include <Tactility/hal/Configuration.h>
-
-extern const tt::hal::Configuration unPhone;

Boards/WaveshareS3Touch43/Source/WaveshareS3Touch43.h

@@ -1,5 +0,0 @@
-#pragma once
-
-#include <Tactility/hal/Configuration.h>
-
-extern const tt::hal::Configuration waveshare_s3_touch_43;

Boards/cyd-2432s024c/Source/Configuration.cpp

@@ -1,14 +1,22 @@
-#include "CYD2432S024C.h"
 #include "devices/Display.h"
 #include "devices/SdCard.h"
 
+#include <Tactility/hal/Configuration.h>
 #include <Tactility/lvgl/LvglSync.h>
 #include <PwmBacklight.h>
 
-#define CYD_SPI_TRANSFER_SIZE_LIMIT (TWODOTFOUR_LCD_DRAW_BUFFER_SIZE * LV_COLOR_DEPTH / 8)
-
 static bool initBoot() {
-    return driver::pwmbacklight::init(TWODOTFOUR_LCD_PIN_BACKLIGHT);
+    // Set the RGB LED Pins to output and turn them off
+    ESP_ERROR_CHECK(gpio_set_direction(GPIO_NUM_4, GPIO_MODE_OUTPUT)); // Red
+    ESP_ERROR_CHECK(gpio_set_direction(GPIO_NUM_16, GPIO_MODE_OUTPUT)); // Green
+    ESP_ERROR_CHECK(gpio_set_direction(GPIO_NUM_17, GPIO_MODE_OUTPUT)); // Blue
+
+    // 0 on, 1 off
+    ESP_ERROR_CHECK(gpio_set_level(GPIO_NUM_4, 1)); // Red
+    ESP_ERROR_CHECK(gpio_set_level(GPIO_NUM_16, 1)); // Green
+    ESP_ERROR_CHECK(gpio_set_level(GPIO_NUM_17, 1)); // Blue
+
+    return driver::pwmbacklight::init(LCD_PIN_BACKLIGHT);
 }
 
 static tt::hal::DeviceVector createDevices() {
@@ -18,7 +26,7 @@ static tt::hal::DeviceVector createDevices() {
     };
 }
 
-const tt::hal::Configuration cyd_2432s024c_config = {
+extern const tt::hal::Configuration hardwareConfiguration = {
     .initBoot = initBoot,
     .createDevices = createDevices,
     .i2c = {
@@ -72,7 +80,7 @@ const tt::hal::Configuration cyd_2432s024c_config = {
                 .data6_io_num = GPIO_NUM_NC,
                 .data7_io_num = GPIO_NUM_NC,
                 .data_io_default_level = false,
-                .max_transfer_sz = CYD_SPI_TRANSFER_SIZE_LIMIT,
+                .max_transfer_sz = LCD_SPI_TRANSFER_SIZE_LIMIT,
                 .flags = 0,
                 .isr_cpu_id = ESP_INTR_CPU_AFFINITY_AUTO,
                 .intr_flags = 0

Boards/cyd-2432s024c/Source/devices/Display.cpp

@@ -0,0 +1,45 @@
+#include "Display.h"
+#include "Cst816Touch.h"
+
+#include <Ili934xDisplay.h>
+#include <PwmBacklight.h>
+
+static std::shared_ptr<tt::hal::touch::TouchDevice> createTouch() {
+    // Note: GPIO 25 for reset and GPIO 21 for interrupt?
+    auto configuration = std::make_unique<Cst816sTouch::Configuration>(
+        I2C_NUM_0,
+        240,
+        320
+    );
+
+    return std::make_shared<Cst816sTouch>(std::move(configuration));
+}
+
+std::shared_ptr<tt::hal::display::DisplayDevice> createDisplay() {
+    Ili934xDisplay::Configuration panel_configuration = {
+        .horizontalResolution = LCD_HORIZONTAL_RESOLUTION,
+        .verticalResolution = LCD_VERTICAL_RESOLUTION,
+        .gapX = 0,
+        .gapY = 0,
+        .swapXY = false,
+        .mirrorX = true,
+        .mirrorY = false,
+        .invertColor = false,
+        .swapBytes = true,
+        .bufferSize = LCD_BUFFER_SIZE,
+        .touch = createTouch(),
+        .backlightDutyFunction = driver::pwmbacklight::setBacklightDuty,
+        .resetPin = GPIO_NUM_NC,
+        .rgbElementOrder = LCD_RGB_ELEMENT_ORDER_BGR
+    };
+
+    auto spi_configuration = std::make_shared<Ili934xDisplay::SpiConfiguration>(Ili934xDisplay::SpiConfiguration {
+        .spiHostDevice = LCD_SPI_HOST,
+        .csPin = LCD_PIN_CS,
+        .dcPin = LCD_PIN_DC,
+        .pixelClockFrequency = 40'000'000,
+        .transactionQueueDepth = 10
+    });
+
+    return std::make_shared<Ili934xDisplay>(panel_configuration, spi_configuration, true);
+}

Boards/cyd-2432s024c/Source/devices/Display.h

@@ -0,0 +1,19 @@
+#pragma once
+
+#include <Tactility/hal/display/DisplayDevice.h>
+#include <driver/gpio.h>
+#include <driver/spi_common.h>
+#include <memory>
+
+// Display
+constexpr auto LCD_PIN_BACKLIGHT = GPIO_NUM_27;
+constexpr auto LCD_SPI_HOST = SPI2_HOST;
+constexpr auto LCD_PIN_CS = GPIO_NUM_15;
+constexpr auto LCD_PIN_DC = GPIO_NUM_2;
+constexpr auto LCD_HORIZONTAL_RESOLUTION = 240;
+constexpr auto LCD_VERTICAL_RESOLUTION = 320;
+constexpr auto LCD_BUFFER_HEIGHT = LCD_VERTICAL_RESOLUTION / 10;
+constexpr auto LCD_BUFFER_SIZE = LCD_HORIZONTAL_RESOLUTION * LCD_BUFFER_HEIGHT;
+constexpr auto LCD_SPI_TRANSFER_SIZE_LIMIT = LCD_BUFFER_SIZE * LV_COLOR_DEPTH / 8;
+
+std::shared_ptr<tt::hal::display::DisplayDevice> createDisplay();

Boards/cyd-2432s024c/Source/devices/SdCard.cpp

@@ -16,7 +16,7 @@ std::shared_ptr<SdCardDevice> createSdCard() {
         GPIO_NUM_NC,
         GPIO_NUM_NC,
         SdCardDevice::MountBehaviour::AtBoot,
-        std::make_shared<tt::Mutex>(),
+        std::make_shared<tt::Mutex>(tt::Mutex::Type::Recursive),
         std::vector<gpio_num_t>(),
         SDCARD_SPI_HOST
     );

Boards/cyd-2432s028r/Source/Configuration.cpp

@@ -0,0 +1,129 @@
+#include "devices/Display.h"
+#include "devices/SdCard.h"
+
+#include <Tactility/hal/Configuration.h>
+#include <Tactility/lvgl/LvglSync.h>
+#include <PwmBacklight.h>
+
+using namespace tt::hal;
+
+static bool initBoot() {
+    // Set the RGB LED Pins to output and turn them off
+    ESP_ERROR_CHECK(gpio_set_direction(GPIO_NUM_4, GPIO_MODE_OUTPUT)); // Red
+    ESP_ERROR_CHECK(gpio_set_direction(GPIO_NUM_16, GPIO_MODE_OUTPUT)); // Green
+    ESP_ERROR_CHECK(gpio_set_direction(GPIO_NUM_17, GPIO_MODE_OUTPUT)); // Blue
+
+    // 0 on, 1 off
+    ESP_ERROR_CHECK(gpio_set_level(GPIO_NUM_4, 1)); // Red
+    ESP_ERROR_CHECK(gpio_set_level(GPIO_NUM_16, 1)); // Green
+    ESP_ERROR_CHECK(gpio_set_level(GPIO_NUM_17, 1)); // Blue
+
+    return driver::pwmbacklight::init(LCD_PIN_BACKLIGHT);
+}
+
+static DeviceVector createDevices() {
+    return {
+        createDisplay(),
+        createSdCard()
+    };
+}
+
+extern const Configuration hardwareConfiguration = {
+    .initBoot = initBoot,
+    .createDevices = createDevices,
+    .i2c = {
+        i2c::Configuration {
+            .name = "CN1",
+            .port = I2C_NUM_0,
+            .initMode = i2c::InitMode::ByTactility,
+            .isMutable = true,
+            .config = (i2c_config_t) {
+                .mode = I2C_MODE_MASTER,
+                .sda_io_num = GPIO_NUM_27,
+                .scl_io_num = GPIO_NUM_22,
+                .sda_pullup_en = false,
+                .scl_pullup_en = false,
+                .master = {
+                    .clk_speed = 400000
+                },
+                .clk_flags = 0
+            }
+        }
+    },
+    .spi {
+        // Display
+        spi::Configuration {
+            .device = SPI2_HOST,
+            .dma = SPI_DMA_CH_AUTO,
+            .config = {
+                .mosi_io_num = GPIO_NUM_13,
+                .miso_io_num = GPIO_NUM_12,
+                .sclk_io_num = GPIO_NUM_14,
+                .quadwp_io_num = GPIO_NUM_NC,
+                .quadhd_io_num = GPIO_NUM_NC,
+                .data4_io_num = GPIO_NUM_NC,
+                .data5_io_num = GPIO_NUM_NC,
+                .data6_io_num = GPIO_NUM_NC,
+                .data7_io_num = GPIO_NUM_NC,
+                .data_io_default_level = false,
+                .max_transfer_sz = LCD_SPI_TRANSFER_SIZE_LIMIT,
+                .flags = 0,
+                .isr_cpu_id = ESP_INTR_CPU_AFFINITY_AUTO,
+                .intr_flags = 0
+            },
+            .initMode = spi::InitMode::ByTactility,
+            .isMutable = false,
+            .lock = tt::lvgl::getSyncLock()
+        },
+        // SDCard
+        spi::Configuration {
+            .device = SPI3_HOST,
+            .dma = SPI_DMA_CH_AUTO,
+            .config = {
+                .mosi_io_num = GPIO_NUM_23,
+                .miso_io_num = GPIO_NUM_19,
+                .sclk_io_num = GPIO_NUM_18,
+                .quadwp_io_num = GPIO_NUM_NC,
+                .quadhd_io_num = GPIO_NUM_NC,
+                .data4_io_num = GPIO_NUM_NC,
+                .data5_io_num = GPIO_NUM_NC,
+                .data6_io_num = GPIO_NUM_NC,
+                .data7_io_num = GPIO_NUM_NC,
+                .data_io_default_level = false,
+                .max_transfer_sz = 0,
+                .flags = 0,
+                .isr_cpu_id = ESP_INTR_CPU_AFFINITY_AUTO,
+                .intr_flags = 0
+            },
+            .initMode = spi::InitMode::ByTactility,
+            .isMutable = false,
+            .lock = tt::lvgl::getSyncLock() // esp_lvgl_port owns the lock for the display
+        },
+    },
+
+    .uart {
+        uart::Configuration {
+            .name = "P1",
+            .port = UART_NUM_1,
+            .rxPin = GPIO_NUM_1,
+            .txPin = GPIO_NUM_3,
+            .rtsPin = GPIO_NUM_NC,
+            .ctsPin = GPIO_NUM_NC,
+            .rxBufferSize = 1024,
+            .txBufferSize = 1024,
+            .config = {
+                .baud_rate = 115200,
+                .data_bits = UART_DATA_8_BITS,
+                .parity    = UART_PARITY_DISABLE,
+                .stop_bits = UART_STOP_BITS_1,
+                .flow_ctrl = UART_HW_FLOWCTRL_DISABLE,
+                .rx_flow_ctrl_thresh = 0,
+                .source_clk = UART_SCLK_DEFAULT,
+                .flags = {
+                    .allow_pd = 0,
+                    .backup_before_sleep = 0,
+                }
+            }
+        }
+    }
+};

Boards/cyd-2432s028r/Source/devices/Display.cpp

@@ -0,0 +1,49 @@
+#include "Display.h"
+#include "Xpt2046SoftSpi.h"
+#include <Ili934xDisplay.h>
+#include <PwmBacklight.h>
+
+static std::shared_ptr<tt::hal::touch::TouchDevice> createTouch() {
+    auto configuration = std::make_unique<Xpt2046SoftSpi::Configuration>(
+        TOUCH_MOSI_PIN,
+        TOUCH_MISO_PIN,
+        TOUCH_SCK_PIN,
+        TOUCH_CS_PIN,
+        LCD_HORIZONTAL_RESOLUTION,
+        LCD_VERTICAL_RESOLUTION,
+        false, // swapXY
+        true, // mirrorX
+        false // mirrorY
+    );
+
+    return std::make_shared<Xpt2046SoftSpi>(std::move(configuration));
+}
+
+std::shared_ptr<tt::hal::display::DisplayDevice> createDisplay() {
+    Ili934xDisplay::Configuration panel_configuration = {
+        .horizontalResolution = LCD_HORIZONTAL_RESOLUTION,
+        .verticalResolution = LCD_VERTICAL_RESOLUTION,
+        .gapX = 0,
+        .gapY = 0,
+        .swapXY = false,
+        .mirrorX = true,
+        .mirrorY = false,
+        .invertColor = false,
+        .swapBytes = true,
+        .bufferSize = LCD_BUFFER_SIZE,
+        .touch = createTouch(),
+        .backlightDutyFunction = driver::pwmbacklight::setBacklightDuty,
+        .resetPin = GPIO_NUM_NC,
+        .rgbElementOrder = LCD_RGB_ELEMENT_ORDER_BGR
+    };
+
+    auto spi_configuration = std::make_shared<Ili934xDisplay::SpiConfiguration>(Ili934xDisplay::SpiConfiguration {
+        .spiHostDevice = LCD_SPI_HOST,
+        .csPin = LCD_PIN_CS,
+        .dcPin = LCD_PIN_DC,
+        .pixelClockFrequency = 40'000'000,
+        .transactionQueueDepth = 10
+    });
+
+    return std::make_shared<Ili934xDisplay>(panel_configuration, spi_configuration, true);
+}

Boards/cyd-2432s028r/Source/devices/Display.h

@@ -0,0 +1,28 @@
+#pragma once
+
+#include <Tactility/hal/display/DisplayDevice.h>
+#include <driver/gpio.h>
+#include <driver/spi_common.h>
+#include <memory>
+
+// Display
+constexpr auto LCD_SPI_HOST = SPI2_HOST;
+constexpr auto LCD_PIN_CS = GPIO_NUM_15;
+constexpr auto LCD_PIN_DC = GPIO_NUM_2;
+constexpr auto LCD_HORIZONTAL_RESOLUTION = 240;
+constexpr auto LCD_VERTICAL_RESOLUTION = 320;
+constexpr auto LCD_BUFFER_HEIGHT = LCD_VERTICAL_RESOLUTION / 10;
+constexpr auto LCD_BUFFER_SIZE = LCD_HORIZONTAL_RESOLUTION * LCD_BUFFER_HEIGHT;
+constexpr auto LCD_SPI_TRANSFER_SIZE_LIMIT = LCD_BUFFER_SIZE * LV_COLOR_DEPTH / 8;
+
+// Display backlight (PWM)
+constexpr auto LCD_PIN_BACKLIGHT = GPIO_NUM_21;
+
+// Touch (Software SPI)
+constexpr auto TOUCH_MISO_PIN = GPIO_NUM_39;
+constexpr auto TOUCH_MOSI_PIN = GPIO_NUM_32;
+constexpr auto TOUCH_SCK_PIN = GPIO_NUM_25;
+constexpr auto TOUCH_CS_PIN = GPIO_NUM_33;
+constexpr auto TOUCH_IRQ_PIN = GPIO_NUM_36;
+
+std::shared_ptr<tt::hal::display::DisplayDevice> createDisplay();

Boards/cyd-2432s028r/Source/devices/SdCard.cpp

@@ -11,7 +11,7 @@ std::shared_ptr<SdCardDevice> createSdCard() {
         GPIO_NUM_NC,
         GPIO_NUM_NC,
         SdCardDevice::MountBehaviour::AtBoot,
-        std::make_shared<tt::Mutex>(),
+        std::make_shared<tt::Mutex>(tt::Mutex::Type::Recursive),
         std::vector<gpio_num_t>(),
         SPI3_HOST
     );

Boards/cyd-2432s028rv3/CMakeLists.txt

@@ -0,0 +1,7 @@
+file(GLOB_RECURSE SOURCE_FILES Source/*.c*)
+
+idf_component_register(
+    SRCS ${SOURCE_FILES}
+    INCLUDE_DIRS "Source"
+    REQUIRES Tactility esp_lvgl_port ST7789 XPT2046SoftSPI PwmBacklight driver vfs fatfs
+)

Boards/cyd-2432s028rv3/Source/Configuration.cpp

@@ -0,0 +1,129 @@
+#include "devices/Display.h"
+#include "devices/SdCard.h"
+
+#include <Tactility/hal/Configuration.h>
+#include <Tactility/lvgl/LvglSync.h>
+#include <PwmBacklight.h>
+
+using namespace tt::hal;
+
+static bool initBoot() {
+    // Set the RGB LED Pins to output and turn them off
+    ESP_ERROR_CHECK(gpio_set_direction(GPIO_NUM_4, GPIO_MODE_OUTPUT)); // Red
+    ESP_ERROR_CHECK(gpio_set_direction(GPIO_NUM_16, GPIO_MODE_OUTPUT)); // Green
+    ESP_ERROR_CHECK(gpio_set_direction(GPIO_NUM_17, GPIO_MODE_OUTPUT)); // Blue
+
+    // 0 on, 1 off
+    ESP_ERROR_CHECK(gpio_set_level(GPIO_NUM_4, 1)); // Red
+    ESP_ERROR_CHECK(gpio_set_level(GPIO_NUM_16, 1)); // Green
+    ESP_ERROR_CHECK(gpio_set_level(GPIO_NUM_17, 1)); // Blue
+
+    return driver::pwmbacklight::init(LCD_PIN_BACKLIGHT);
+}
+
+static DeviceVector createDevices() {
+    return {
+        createDisplay(),
+        createSdCard()
+    };
+}
+
+extern const Configuration hardwareConfiguration = {
+    .initBoot = initBoot,
+    .createDevices = createDevices,
+    .i2c = {
+        i2c::Configuration {
+            .name = "CN1",
+            .port = I2C_NUM_0,
+            .initMode = i2c::InitMode::ByTactility,
+            .isMutable = true,
+            .config = (i2c_config_t) {
+                .mode = I2C_MODE_MASTER,
+                .sda_io_num = GPIO_NUM_27,
+                .scl_io_num = GPIO_NUM_22,
+                .sda_pullup_en = false,
+                .scl_pullup_en = false,
+                .master = {
+                    .clk_speed = 400000
+                },
+                .clk_flags = 0
+            }
+        }
+    },
+    .spi {
+        // Display
+        spi::Configuration {
+            .device = SPI2_HOST,
+            .dma = SPI_DMA_CH_AUTO,
+            .config = {
+                .mosi_io_num = GPIO_NUM_13,
+                .miso_io_num = GPIO_NUM_12,
+                .sclk_io_num = GPIO_NUM_14,
+                .quadwp_io_num = GPIO_NUM_NC,
+                .quadhd_io_num = GPIO_NUM_NC,
+                .data4_io_num = GPIO_NUM_NC,
+                .data5_io_num = GPIO_NUM_NC,
+                .data6_io_num = GPIO_NUM_NC,
+                .data7_io_num = GPIO_NUM_NC,
+                .data_io_default_level = false,
+                .max_transfer_sz = LCD_SPI_TRANSFER_SIZE_LIMIT,
+                .flags = 0,
+                .isr_cpu_id = ESP_INTR_CPU_AFFINITY_AUTO,
+                .intr_flags = 0
+            },
+            .initMode = spi::InitMode::ByTactility,
+            .isMutable = false,
+            .lock = tt::lvgl::getSyncLock()
+        },
+        // SDCard
+        spi::Configuration {
+            .device = SPI3_HOST,
+            .dma = SPI_DMA_CH_AUTO,
+            .config = {
+                .mosi_io_num = GPIO_NUM_23,
+                .miso_io_num = GPIO_NUM_19,
+                .sclk_io_num = GPIO_NUM_18,
+                .quadwp_io_num = GPIO_NUM_NC,
+                .quadhd_io_num = GPIO_NUM_NC,
+                .data4_io_num = GPIO_NUM_NC,
+                .data5_io_num = GPIO_NUM_NC,
+                .data6_io_num = GPIO_NUM_NC,
+                .data7_io_num = GPIO_NUM_NC,
+                .data_io_default_level = false,
+                .max_transfer_sz = 0,
+                .flags = 0,
+                .isr_cpu_id = ESP_INTR_CPU_AFFINITY_AUTO,
+                .intr_flags = 0
+            },
+            .initMode = spi::InitMode::ByTactility,
+            .isMutable = false,
+            .lock = tt::lvgl::getSyncLock() // esp_lvgl_port owns the lock for the display
+        },
+    },
+
+    .uart {
+        uart::Configuration {
+            .name = "P1",
+            .port = UART_NUM_1,
+            .rxPin = GPIO_NUM_1,
+            .txPin = GPIO_NUM_3,
+            .rtsPin = GPIO_NUM_NC,
+            .ctsPin = GPIO_NUM_NC,
+            .rxBufferSize = 1024,
+            .txBufferSize = 1024,
+            .config = {
+                .baud_rate = 115200,
+                .data_bits = UART_DATA_8_BITS,
+                .parity    = UART_PARITY_DISABLE,
+                .stop_bits = UART_STOP_BITS_1,
+                .flow_ctrl = UART_HW_FLOWCTRL_DISABLE,
+                .rx_flow_ctrl_thresh = 0,
+                .source_clk = UART_SCLK_DEFAULT,
+                .flags = {
+                    .allow_pd = 0,
+                    .backup_before_sleep = 0,
+                }
+            }
+        }
+    }
+};

Boards/cyd-2432s028rv3/Source/devices/Display.cpp

@@ -0,0 +1,49 @@
+#include "Display.h"
+#include "Xpt2046SoftSpi.h"
+#include <St7789Display.h>
+#include <PwmBacklight.h>
+
+constexpr auto* TAG = "CYD";
+
+static std::shared_ptr<tt::hal::touch::TouchDevice> createTouch() {
+    auto configuration = std::make_unique<Xpt2046SoftSpi::Configuration>(
+        TOUCH_MOSI_PIN,
+        TOUCH_MISO_PIN,
+        TOUCH_SCK_PIN,
+        TOUCH_CS_PIN,
+        LCD_HORIZONTAL_RESOLUTION,
+        LCD_VERTICAL_RESOLUTION,
+        false, // swapXY
+        true, // mirrorX
+        false // mirrorY
+    );
+
+    return std::make_shared<Xpt2046SoftSpi>(std::move(configuration));
+}
+
+std::shared_ptr<tt::hal::display::DisplayDevice> createDisplay() {
+    St7789Display::Configuration panel_configuration = {
+        .horizontalResolution = LCD_HORIZONTAL_RESOLUTION,
+        .verticalResolution = LCD_VERTICAL_RESOLUTION,
+        .gapX = 0,
+        .gapY = 0,
+        .swapXY = false,
+        .mirrorX = false,
+        .mirrorY = false,
+        .invertColor = false,
+        .bufferSize = LCD_BUFFER_SIZE,
+        .touch = createTouch(),
+        .backlightDutyFunction = driver::pwmbacklight::setBacklightDuty,
+        .resetPin = GPIO_NUM_NC
+    };
+
+    auto spi_configuration = std::make_shared<St7789Display::SpiConfiguration>(St7789Display::SpiConfiguration {
+        .spiHostDevice = LCD_SPI_HOST,
+        .csPin = LCD_PIN_CS,
+        .dcPin = LCD_PIN_DC,
+        .pixelClockFrequency = 62'500'000,
+        .transactionQueueDepth = 10
+    });
+
+    return std::make_shared<St7789Display>(panel_configuration, spi_configuration);
+}

Boards/cyd-2432s028rv3/Source/devices/Display.h

@@ -0,0 +1,28 @@
+#pragma once
+
+#include <Tactility/hal/display/DisplayDevice.h>
+
+#include <driver/gpio.h>
+#include <driver/spi_common.h>
+
+#include <memory>
+
+// Display
+constexpr auto LCD_SPI_HOST = SPI2_HOST;
+constexpr auto LCD_PIN_CS = GPIO_NUM_15;
+constexpr auto LCD_PIN_DC = GPIO_NUM_2;
+constexpr auto LCD_PIN_BACKLIGHT = GPIO_NUM_21;
+constexpr auto LCD_HORIZONTAL_RESOLUTION = 240;
+constexpr auto LCD_VERTICAL_RESOLUTION = 320;
+constexpr auto LCD_BUFFER_HEIGHT = LCD_VERTICAL_RESOLUTION / 10;
+constexpr auto LCD_BUFFER_SIZE = LCD_HORIZONTAL_RESOLUTION * LCD_BUFFER_HEIGHT;
+constexpr auto LCD_SPI_TRANSFER_SIZE_LIMIT = LCD_BUFFER_SIZE * LV_COLOR_DEPTH / 8;
+
+// Touch (Software SPI)
+constexpr auto TOUCH_MISO_PIN = GPIO_NUM_39;
+constexpr auto TOUCH_MOSI_PIN = GPIO_NUM_32;
+constexpr auto TOUCH_SCK_PIN = GPIO_NUM_25;
+constexpr auto TOUCH_CS_PIN = GPIO_NUM_33;
+constexpr auto TOUCH_IRQ_PIN = GPIO_NUM_36;
+
+std::shared_ptr<tt::hal::display::DisplayDevice> createDisplay();

Boards/cyd-2432s028rv3/Source/devices/SdCard.cpp

@@ -0,0 +1,21 @@
+#include "SdCard.h"
+#include <Tactility/hal/sdcard/SpiSdCardDevice.h>
+#include <Tactility/lvgl/LvglSync.h>
+
+using tt::hal::sdcard::SpiSdCardDevice;
+
+std::shared_ptr<SdCardDevice> createSdCard() {
+    auto config = std::make_unique<SpiSdCardDevice::Config>(
+        GPIO_NUM_5,
+        GPIO_NUM_NC,
+        GPIO_NUM_NC,
+        GPIO_NUM_NC,
+        SdCardDevice::MountBehaviour::AtBoot,
+        std::make_shared<tt::Mutex>(tt::Mutex::Type::Recursive),
+        std::vector<gpio_num_t>(),
+        SPI3_HOST
+    );
+
+    return std::make_shared<SpiSdCardDevice>(std::move(config));
+}
+

Boards/cyd-2432s032c/Source/Configuration.cpp

@@ -1,17 +1,27 @@
-#include "CYD2432S032C.h"
-#include "Tactility/lvgl/LvglSync.h"
 #include "devices/Display.h"
 #include "devices/SdCard.h"
 
+#include <Tactility/hal/Configuration.h>
 #include <Tactility/kernel/SystemEvents.h>
+#include <Tactility/lvgl/LvglSync.h>
 
 #include <PwmBacklight.h>
 
 bool initBoot() {
-    if (!driver::pwmbacklight::init(GPIO_NUM_27)) {
+    if (!driver::pwmbacklight::init(LCD_PIN_BACKLIGHT)) {
         return false;
     }
 
+    // Set the RGB LED Pins to output and turn them off
+    ESP_ERROR_CHECK(gpio_set_direction(GPIO_NUM_4, GPIO_MODE_OUTPUT)); // Red
+    ESP_ERROR_CHECK(gpio_set_direction(GPIO_NUM_16, GPIO_MODE_OUTPUT)); // Green
+    ESP_ERROR_CHECK(gpio_set_direction(GPIO_NUM_17, GPIO_MODE_OUTPUT)); // Blue
+
+    // 0 on, 1 off
+    ESP_ERROR_CHECK(gpio_set_level(GPIO_NUM_4, 1)); // Red
+    ESP_ERROR_CHECK(gpio_set_level(GPIO_NUM_16, 1)); // Green
+    ESP_ERROR_CHECK(gpio_set_level(GPIO_NUM_17, 1)); // Blue
+
     // This display has a weird glitch with gamma during boot, which results in uneven dark gray colours.
     // Setting gamma curve index to 0 doesn't work at boot for an unknown reason, so we set the curve index to 1:
     tt::kernel::subscribeSystemEvent(tt::kernel::SystemEvent::BootSplash, [](auto) {
@@ -32,7 +42,7 @@ static tt::hal::DeviceVector createDevices() {
     };
 }
 
-const tt::hal::Configuration cyd_2432S032c_config = {
+extern const tt::hal::Configuration hardwareConfiguration = {
     .initBoot = initBoot,
     .createDevices = createDevices,
     .i2c = {
@@ -55,6 +65,7 @@ const tt::hal::Configuration cyd_2432S032c_config = {
         }
     },
     .spi {
+        // Display
         tt::hal::spi::Configuration {
             .device = SPI2_HOST,
             .dma = SPI_DMA_CH_AUTO,
@@ -69,7 +80,7 @@ const tt::hal::Configuration cyd_2432S032c_config = {
                 .data6_io_num = GPIO_NUM_NC,
                 .data7_io_num = GPIO_NUM_NC,
                 .data_io_default_level = false,
-                .max_transfer_sz = 0,
+                .max_transfer_sz = LCD_SPI_TRANSFER_SIZE_LIMIT,
                 .flags = 0,
                 .isr_cpu_id = ESP_INTR_CPU_AFFINITY_AUTO,
                 .intr_flags = 0
@@ -78,6 +89,7 @@ const tt::hal::Configuration cyd_2432S032c_config = {
             .isMutable = false,
             .lock = tt::lvgl::getSyncLock() // esp_lvgl_port owns the lock for the display
         },
+        // SD card
         tt::hal::spi::Configuration {
             .device = SPI3_HOST,
             .dma = SPI_DMA_CH_AUTO,

Boards/cyd-2432s032c/Source/devices/Display.cpp

@@ -0,0 +1,44 @@
+#include "Display.h"
+
+#include <Gt911Touch.h>
+#include <Ili934xDisplay.h>
+#include <PwmBacklight.h>
+
+static std::shared_ptr<tt::hal::touch::TouchDevice> createTouch() {
+    auto configuration = std::make_unique<Gt911Touch::Configuration>(
+        I2C_NUM_0,
+        LCD_HORIZONTAL_RESOLUTION,
+        LCD_VERTICAL_RESOLUTION
+    );
+
+    return std::make_shared<Gt911Touch>(std::move(configuration));
+}
+
+std::shared_ptr<tt::hal::display::DisplayDevice> createDisplay() {
+    Ili934xDisplay::Configuration panel_configuration = {
+        .horizontalResolution = LCD_HORIZONTAL_RESOLUTION,
+        .verticalResolution = LCD_VERTICAL_RESOLUTION,
+        .gapX = 0,
+        .gapY = 0,
+        .swapXY = true,
+        .mirrorX = true,
+        .mirrorY = true,
+        .invertColor = true,
+        .swapBytes = true,
+        .bufferSize = LCD_BUFFER_SIZE,
+        .touch = createTouch(),
+        .backlightDutyFunction = driver::pwmbacklight::setBacklightDuty,
+        .resetPin = GPIO_NUM_NC,
+        .rgbElementOrder = LCD_RGB_ELEMENT_ORDER_RGB
+    };
+
+    auto spi_configuration = std::make_shared<Ili934xDisplay::SpiConfiguration>(Ili934xDisplay::SpiConfiguration {
+        .spiHostDevice = LCD_SPI_HOST,
+        .csPin = LCD_PIN_CS,
+        .dcPin = LCD_PIN_DC,
+        .pixelClockFrequency = 40'000'000,
+        .transactionQueueDepth = 10
+    });
+
+    return std::make_shared<Ili934xDisplay>(panel_configuration, spi_configuration, true);
+}

Boards/cyd-2432s032c/Source/devices/Display.h

@@ -0,0 +1,19 @@
+#pragma once
+
+#include <Tactility/hal/display/DisplayDevice.h>
+#include <driver/gpio.h>
+#include <driver/spi_common.h>
+#include <memory>
+
+// Display
+constexpr auto LCD_SPI_HOST = SPI2_HOST;
+constexpr auto LCD_PIN_CS = GPIO_NUM_15;
+constexpr auto LCD_PIN_DC = GPIO_NUM_2;
+constexpr auto LCD_PIN_BACKLIGHT = GPIO_NUM_27;
+constexpr auto LCD_HORIZONTAL_RESOLUTION = 240;
+constexpr auto LCD_VERTICAL_RESOLUTION = 320;
+constexpr auto LCD_BUFFER_HEIGHT = LCD_VERTICAL_RESOLUTION / 10;
+constexpr auto LCD_BUFFER_SIZE = LCD_HORIZONTAL_RESOLUTION * LCD_BUFFER_HEIGHT;
+constexpr auto LCD_SPI_TRANSFER_SIZE_LIMIT = LCD_BUFFER_SIZE * LV_COLOR_DEPTH / 8;
+
+std::shared_ptr<tt::hal::display::DisplayDevice> createDisplay();

Boards/cyd-2432s032c/Source/devices/SdCard.cpp

@@ -15,7 +15,7 @@ std::shared_ptr<SdCardDevice> createSdCard() {
         GPIO_NUM_NC,
         GPIO_NUM_NC,
         SdCardDevice::MountBehaviour::AtBoot,
-        std::make_shared<tt::Mutex>(),
+        std::make_shared<tt::Mutex>(tt::Mutex::Type::Recursive),
         std::vector<gpio_num_t>(),
         SDCARD_SPI_HOST
     );

Boards/cyd-4848s040c/Source/Configuration.cpp

@@ -1,7 +1,9 @@
-#include "CYD4848S040C.h"
 #include "devices/St7701Display.h"
 #include "devices/SdCard.h"
 
+#include <Tactility/hal/Configuration.h>
+#include <Tactility/kernel/SystemEvents.h>
+#include <Tactility/lvgl/LvglSync.h>
 #include <PwmBacklight.h>
 
 using namespace tt::hal;
@@ -12,12 +14,12 @@ static bool initBoot() {
 
 static DeviceVector createDevices() {
     return {
-        std::reinterpret_pointer_cast<Device>(std::make_shared<St7701Display>()),
+        std::make_shared<St7701Display>(),
         createSdCard()
     };
 }
 
-const Configuration cyd_4848s040c_config = {
+extern const Configuration hardwareConfiguration = {
     .initBoot = initBoot,
     .createDevices = createDevices,
     .i2c = {
@@ -59,7 +61,7 @@ const Configuration cyd_4848s040c_config = {
         }
     },
     .spi {
-        //SD Card
+        // SD Card & display init
         spi::Configuration {
             .device = SPI2_HOST,
             .dma = SPI_DMA_CH_AUTO,
@@ -68,20 +70,20 @@ const Configuration cyd_4848s040c_config = {
                 .miso_io_num = GPIO_NUM_41,
                 .sclk_io_num = GPIO_NUM_48,
                 .quadwp_io_num = -1,
-                .quadhd_io_num = -1,
+                .quadhd_io_num = GPIO_NUM_42,
                 .data4_io_num = -1,
                 .data5_io_num = -1,
                 .data6_io_num = -1,
                 .data7_io_num = -1,
                 .data_io_default_level = false,
-                .max_transfer_sz = 8192,
+                .max_transfer_sz = 1024 * 128,
                 .flags = 0,
                 .isr_cpu_id = ESP_INTR_CPU_AFFINITY_AUTO,
                 .intr_flags = 0
             },
             .initMode = spi::InitMode::ByTactility,
             .isMutable = false,
-            .lock = nullptr
+            .lock = tt::lvgl::getSyncLock()
         }
     }
 };

Boards/cyd-4848s040c/Source/devices/SdCard.cpp

@@ -11,7 +11,9 @@ std::shared_ptr<SdCardDevice> createSdCard() {
         GPIO_NUM_NC,
         GPIO_NUM_NC,
         GPIO_NUM_NC,
-        SdCardDevice::MountBehaviour::AtBoot
+        SdCardDevice::MountBehaviour::AtBoot,
+        tt::lvgl::getSyncLock(),
+        std::vector { GPIO_NUM_39 }
     );
 
     auto sdcard = std::make_shared<SpiSdCardDevice>(

Boards/cyd-8048s043c/Source/Configuration.cpp

@@ -1,8 +1,9 @@
-#include "CYD8048S043C.h" // Don't remove, or we get a linker error ("undefined reference to `cyd_8048s043c_config'" - GCC bug?)
 #include "PwmBacklight.h"
 #include "devices/Display.h"
 #include "devices/SdCard.h"
 
+#include <Tactility/hal/Configuration.h>
+
 using namespace tt::hal;
 
 static bool initBoot() {
@@ -17,7 +18,7 @@ static DeviceVector createDevices() {
     };
 }
 
-const Configuration cyd_8048s043c_config = {
+extern const Configuration hardwareConfiguration = {
     .initBoot = initBoot,
     .createDevices = createDevices,
     .i2c = {

Boards/cyd-e32r28t/Source/Configuration.cpp

@@ -1,13 +1,12 @@
-#include "E32R28T.h"
 #include "devices/SdCard.h"
 #include "devices/Display.h"
+
+#include <Tactility/hal/Configuration.h>
 #include <Tactility/lvgl/LvglSync.h>
 #include <PwmBacklight.h>
 
-#define CYD_SPI_TRANSFER_SIZE_LIMIT (240 * 320 / 4 * 2)
-
 static bool initBoot() {
-    return driver::pwmbacklight::init(CYD_BACKLIGHT_PIN);
+    return driver::pwmbacklight::init(LCD_BACKLIGHT_PIN);
 }
 
 static tt::hal::DeviceVector createDevices() {
@@ -17,7 +16,7 @@ static tt::hal::DeviceVector createDevices() {
     };
 }
 
-const tt::hal::Configuration cyd_e32r28t_config = {
+extern const tt::hal::Configuration hardwareConfiguration = {
     .initBoot = initBoot,
     .createDevices = createDevices,
     .i2c = {},
@@ -36,7 +35,7 @@ const tt::hal::Configuration cyd_e32r28t_config = {
                 .data6_io_num = GPIO_NUM_NC,
                 .data7_io_num = GPIO_NUM_NC,
                 .data_io_default_level = false,
-                .max_transfer_sz = CYD_SPI_TRANSFER_SIZE_LIMIT,
+                .max_transfer_sz = LCD_SPI_TRANSFER_SIZE_LIMIT,
                 .flags = 0,
                 .isr_cpu_id = ESP_INTR_CPU_AFFINITY_AUTO,
                 .intr_flags = 0
@@ -59,7 +58,7 @@ const tt::hal::Configuration cyd_e32r28t_config = {
                 .data6_io_num = GPIO_NUM_NC,
                 .data7_io_num = GPIO_NUM_NC,
                 .data_io_default_level = false,
-                .max_transfer_sz = CYD_SPI_TRANSFER_SIZE_LIMIT,
+                .max_transfer_sz = 0,
                 .flags = 0,
                 .isr_cpu_id = ESP_INTR_CPU_AFFINITY_AUTO,
                 .intr_flags = 0

Boards/cyd-e32r28t/Source/devices/Display.cpp

@@ -0,0 +1,51 @@
+#include "Display.h"
+
+#include <Xpt2046SoftSpi.h>
+#include <Ili934xDisplay.h>
+#include <PwmBacklight.h>
+#include <Tactility/hal/touch/TouchDevice.h>
+
+static std::shared_ptr<tt::hal::touch::TouchDevice> createTouch() {
+    auto config = std::make_unique<Xpt2046SoftSpi::Configuration>(
+        TOUCH_MOSI_PIN,
+        TOUCH_MISO_PIN,
+        TOUCH_SCK_PIN,
+        TOUCH_CS_PIN,
+        LCD_HORIZONTAL_RESOLUTION,
+        LCD_VERTICAL_RESOLUTION,
+        false,
+        true,
+        false
+    );
+
+    return std::make_shared<Xpt2046SoftSpi>(std::move(config));
+}
+
+std::shared_ptr<tt::hal::display::DisplayDevice> createDisplay() {
+    Ili934xDisplay::Configuration panel_configuration = {
+        .horizontalResolution = LCD_HORIZONTAL_RESOLUTION,
+        .verticalResolution = LCD_VERTICAL_RESOLUTION,
+        .gapX = 0,
+        .gapY = 0,
+        .swapXY = false,
+        .mirrorX = true,
+        .mirrorY = false,
+        .invertColor = false,
+        .swapBytes = true,
+        .bufferSize = LCD_BUFFER_SIZE,
+        .touch = createTouch(),
+        .backlightDutyFunction = driver::pwmbacklight::setBacklightDuty,
+        .resetPin = GPIO_NUM_NC,
+        .rgbElementOrder = LCD_RGB_ELEMENT_ORDER_BGR
+    };
+
+    auto spi_configuration = std::make_shared<Ili934xDisplay::SpiConfiguration>(Ili934xDisplay::SpiConfiguration {
+        .spiHostDevice = LCD_SPI_HOST,
+        .csPin = LCD_PIN_CS,
+        .dcPin = LCD_PIN_DC,
+        .pixelClockFrequency = 40'000'000,
+        .transactionQueueDepth = 10
+    });
+
+    return std::make_shared<Ili934xDisplay>(panel_configuration, spi_configuration, true);
+}

Boards/cyd-e32r28t/Source/devices/Display.h

@@ -0,0 +1,28 @@
+#pragma once
+
+#include <Tactility/hal/display/DisplayDevice.h>
+#include <driver/gpio.h>
+#include <driver/spi_common.h>
+#include <memory>
+
+// Display
+constexpr auto LCD_SPI_HOST = SPI2_HOST;
+constexpr auto LCD_PIN_CS = GPIO_NUM_15;
+constexpr auto LCD_PIN_DC = GPIO_NUM_2;
+constexpr auto LCD_HORIZONTAL_RESOLUTION = 240;
+constexpr auto LCD_VERTICAL_RESOLUTION = 320;
+constexpr auto LCD_BUFFER_HEIGHT = (LCD_VERTICAL_RESOLUTION / 10);
+constexpr auto LCD_BUFFER_SIZE = (LCD_HORIZONTAL_RESOLUTION * LCD_BUFFER_HEIGHT);
+constexpr auto LCD_SPI_TRANSFER_SIZE_LIMIT = LCD_BUFFER_SIZE * LV_COLOR_DEPTH / 8;
+
+// Touch (Software SPI)
+constexpr auto TOUCH_MISO_PIN = GPIO_NUM_39;
+constexpr auto TOUCH_MOSI_PIN = GPIO_NUM_32;
+constexpr auto TOUCH_SCK_PIN = GPIO_NUM_25;
+constexpr auto TOUCH_CS_PIN = GPIO_NUM_33;
+constexpr auto TOUCH_IRQ_PIN = GPIO_NUM_36;
+
+// Backlight
+constexpr auto LCD_BACKLIGHT_PIN = GPIO_NUM_21;
+
+std::shared_ptr<tt::hal::display::DisplayDevice> createDisplay();

Boards/cyd-e32r28t/Source/devices/SdCard.cpp

@@ -10,7 +10,7 @@ std::shared_ptr<SdCardDevice> createSdCard() {
         GPIO_NUM_NC,
         GPIO_NUM_NC,
         SdCardDevice::MountBehaviour::AtBoot,
-        std::make_shared<tt::Mutex>(),
+        std::make_shared<tt::Mutex>(tt::Mutex::Type::Recursive),
         std::vector<gpio_num_t>(),
         SPI3_HOST
     );

Boards/cyd-e32r32p/CMakeLists.txt

@@ -0,0 +1,7 @@
+file(GLOB_RECURSE SOURCE_FILES Source/*.c*)
+
+idf_component_register(
+    SRCS ${SOURCE_FILES}
+    INCLUDE_DIRS "Source"
+    REQUIRES Tactility esp_lvgl_port ST7789 XPT2046 PwmBacklight EstimatedPower driver vfs fatfs
+)

Boards/cyd-e32r32p/Source/Configuration.cpp

@@ -1,45 +1,50 @@
-#include "CYD2432S028R.h"
-#include "devices/Display.h"
 #include "devices/SdCard.h"
+#include "devices/Display.h"
+#include "devices/Power.h"
+
+#include <Tactility/hal/Configuration.h>
 #include <Tactility/lvgl/LvglSync.h>
 #include <PwmBacklight.h>
-#include <Tactility/hal/Configuration.h>
-
-// SPI Transfer
-#define CYD_SPI_TRANSFER_SIZE_LIMIT (CYD2432S028R_LCD_DRAW_BUFFER_SIZE * LV_COLOR_DEPTH / 8)
-// Display backlight (PWM)
-#define CYD2432S028R_LCD_PIN_BACKLIGHT GPIO_NUM_21
 
 using namespace tt::hal;
 
 static bool initBoot() {
-    //Set the RGB Led Pins to output and turn them off
+    return driver::pwmbacklight::init(DISPLAY_BACKLIGHT_PIN);
-    ESP_ERROR_CHECK(gpio_set_direction(GPIO_NUM_4, GPIO_MODE_OUTPUT)); //Red
-    ESP_ERROR_CHECK(gpio_set_direction(GPIO_NUM_16, GPIO_MODE_OUTPUT)); //Green
-    ESP_ERROR_CHECK(gpio_set_direction(GPIO_NUM_17, GPIO_MODE_OUTPUT)); //Blue
-
-    //0 on, 1 off... yep it's backwards.
-    ESP_ERROR_CHECK(gpio_set_level(GPIO_NUM_4, 1)); //Red
-    ESP_ERROR_CHECK(gpio_set_level(GPIO_NUM_16, 1)); //Green
-    ESP_ERROR_CHECK(gpio_set_level(GPIO_NUM_17, 1)); //Blue
-
-    return driver::pwmbacklight::init(CYD2432S028R_LCD_PIN_BACKLIGHT);
 }
 
-static DeviceVector createDevices() {
+static tt::hal::DeviceVector createDevices() {
     return {
+        createPower(),
         createDisplay(),
         createSdCard()
     };
 }
 
-const Configuration cyd_2432s028r_config = {
+extern const Configuration hardwareConfiguration = {
     .initBoot = initBoot,
     .createDevices = createDevices,
-    .i2c = {},
+    .i2c = {
-    .spi {
+        tt::hal::i2c::Configuration {
-        //Display
+            .name = "External",
-        spi::Configuration {
+            .port = I2C_NUM_0,
+            .initMode = tt::hal::i2c::InitMode::ByTactility,
+            .isMutable = true,
+            .config = (i2c_config_t) {
+                .mode = I2C_MODE_MASTER,
+                .sda_io_num = GPIO_NUM_32,
+                .scl_io_num = GPIO_NUM_25,
+                .sda_pullup_en = false,
+                .scl_pullup_en = false,
+                .master = {
+                    .clk_speed = 400000
+                },
+                .clk_flags = 0
+            }
+        },
+    },
+    // Display
+    .spi = {
+        tt::hal::spi::Configuration {
             .device = SPI2_HOST,
             .dma = SPI_DMA_CH_AUTO,
             .config = {
@@ -53,18 +58,17 @@ const Configuration cyd_2432s028r_config = {
                 .data6_io_num = GPIO_NUM_NC,
                 .data7_io_num = GPIO_NUM_NC,
                 .data_io_default_level = false,
-                .max_transfer_sz = CYD_SPI_TRANSFER_SIZE_LIMIT,
+                .max_transfer_sz = DISPLAY_SPI_TRANSFER_SIZE_LIMIT,
                 .flags = 0,
                 .isr_cpu_id = ESP_INTR_CPU_AFFINITY_AUTO,
                 .intr_flags = 0
             },
-            .initMode = spi::InitMode::ByTactility,
+            .initMode = tt::hal::spi::InitMode::ByTactility,
             .isMutable = false,
             .lock = tt::lvgl::getSyncLock()
         },
-        
+        // SD Card
-        // SDCard
+        tt::hal::spi::Configuration {
-        spi::Configuration {
             .device = SPI3_HOST,
             .dma = SPI_DMA_CH_AUTO,
             .config = {
@@ -78,14 +82,15 @@ const Configuration cyd_2432s028r_config = {
                 .data6_io_num = GPIO_NUM_NC,
                 .data7_io_num = GPIO_NUM_NC,
                 .data_io_default_level = false,
-                .max_transfer_sz = 0,
+                .max_transfer_sz = 8192,
                 .flags = 0,
                 .isr_cpu_id = ESP_INTR_CPU_AFFINITY_AUTO,
                 .intr_flags = 0
             },
-            .initMode = spi::InitMode::ByTactility,
+            .initMode = tt::hal::spi::InitMode::ByTactility,
             .isMutable = false,
-            .lock = tt::lvgl::getSyncLock() // esp_lvgl_port owns the lock for the display
+            .lock = nullptr
         },
+
     }
 };

Boards/cyd-e32r32p/Source/devices/Display.cpp

@@ -0,0 +1,51 @@
+#include "Display.h"
+
+#include <Xpt2046Touch.h>
+#include <St7789Display.h>
+#include <PwmBacklight.h>
+#include <Tactility/hal/touch/TouchDevice.h>
+
+// Create the XPT2046 touch device (hardware/esp_lcd driver)
+static std::shared_ptr<tt::hal::touch::TouchDevice> createTouch() {
+    auto config = std::make_unique<Xpt2046Touch::Configuration>(
+        DISPLAY_SPI_HOST,                                // spi device / bus (SPI2_HOST)
+        TOUCH_CS_PIN,                                    // touch CS (IO33)
+        (uint16_t)DISPLAY_HORIZONTAL_RESOLUTION,         // x max
+        (uint16_t)DISPLAY_VERTICAL_RESOLUTION,           // y max
+        false,                                               // swapXy
+        true,                                                // mirrorX
+        true                                                 // mirrorY
+    );
+
+    return std::make_shared<Xpt2046Touch>(std::move(config));
+}
+
+std::shared_ptr<tt::hal::display::DisplayDevice> createDisplay() {
+    // Create the ST7789 panel configuration
+    St7789Display::Configuration panel_configuration = {
+        .horizontalResolution = DISPLAY_HORIZONTAL_RESOLUTION,
+        .verticalResolution = DISPLAY_VERTICAL_RESOLUTION,
+        .gapX = 0,
+        .gapY = 0,
+        .swapXY = false,
+        .mirrorX = false,
+        .mirrorY = false,
+        .invertColor = false,
+        .bufferSize = DISPLAY_DRAW_BUFFER_SIZE,  // 0 -> default 1/10 screen
+        .touch = createTouch(),
+        .backlightDutyFunction = driver::pwmbacklight::setBacklightDuty,
+        .resetPin = GPIO_NUM_NC,
+        .rgbElementOrder = LCD_RGB_ELEMENT_ORDER_BGR  // BGR for this display
+    };
+
+    // Create the SPI configuration (from EspLcdSpiDisplay base class)
+    auto spi_configuration = std::make_shared<EspLcdSpiDisplay::SpiConfiguration>(EspLcdSpiDisplay::SpiConfiguration {
+        .spiHostDevice = DISPLAY_SPI_HOST,
+        .csPin = DISPLAY_PIN_CS,
+        .dcPin = DISPLAY_PIN_DC,
+        .pixelClockFrequency = 40'000'000,
+        .transactionQueueDepth = 10
+    });
+
+    return std::make_shared<St7789Display>(panel_configuration, spi_configuration);
+}

Boards/cyd-e32r32p/Source/devices/Display.h

@@ -0,0 +1,27 @@
+#pragma once
+
+#include <Tactility/hal/display/DisplayDevice.h>
+#include "driver/gpio.h"
+#include "driver/spi_common.h"
+#include <memory>
+
+// Display (ST7789P3 on this board)
+constexpr auto DISPLAY_SPI_HOST = SPI2_HOST;
+constexpr auto DISPLAY_PIN_CS = GPIO_NUM_15;
+constexpr auto DISPLAY_PIN_DC = GPIO_NUM_2;
+constexpr auto DISPLAY_HORIZONTAL_RESOLUTION = 240;
+constexpr auto DISPLAY_VERTICAL_RESOLUTION = 320;
+constexpr auto DISPLAY_DRAW_BUFFER_HEIGHT = (DISPLAY_VERTICAL_RESOLUTION / 10);
+constexpr auto DISPLAY_DRAW_BUFFER_SIZE = (DISPLAY_HORIZONTAL_RESOLUTION * DISPLAY_DRAW_BUFFER_HEIGHT);
+constexpr auto DISPLAY_BACKLIGHT_PIN = GPIO_NUM_27;
+constexpr auto DISPLAY_SPI_TRANSFER_SIZE_LIMIT = DISPLAY_DRAW_BUFFER_SIZE * sizeof(lv_color_t);
+
+// Touch (XPT2046, resistive, shared SPI with display)
+constexpr auto TOUCH_MISO_PIN = GPIO_NUM_12;
+constexpr auto TOUCH_MOSI_PIN = GPIO_NUM_13;
+constexpr auto TOUCH_SCK_PIN = GPIO_NUM_14;
+constexpr auto TOUCH_CS_PIN = GPIO_NUM_33;
+constexpr auto TOUCH_IRQ_PIN = GPIO_NUM_36;
+
+
+std::shared_ptr<tt::hal::display::DisplayDevice> createDisplay();

Boards/cyd-e32r32p/Source/devices/Power.cpp

@@ -0,0 +1,12 @@
+#include "Power.h"
+
+#include <ChargeFromAdcVoltage.h>
+#include <EstimatedPower.h>
+
+std::shared_ptr<tt::hal::power::PowerDevice> createPower() {
+    ChargeFromAdcVoltage::Configuration configuration;
+    // 2.0 ratio, but +.11 added as display voltage sag compensation.
+    configuration.adcMultiplier = 2.11;
+
+    return std::make_shared<EstimatedPower>(configuration);
+}

Boards/cyd-e32r32p/Source/devices/Power.h

@@ -0,0 +1,6 @@
+#pragma once
+
+#include <memory>
+#include <Tactility/hal/power/PowerDevice.h>
+
+std::shared_ptr<tt::hal::power::PowerDevice> createPower();

Boards/cyd-e32r32p/Source/devices/SdCard.cpp

@@ -0,0 +1,22 @@
+#include "SdCard.h"
+#include <Tactility/hal/sdcard/SpiSdCardDevice.h>
+
+using tt::hal::sdcard::SpiSdCardDevice;
+using SdCardDevice = tt::hal::sdcard::SdCardDevice;
+
+std::shared_ptr<SdCardDevice> createSdCard() {
+    auto configuration = std::make_unique<SpiSdCardDevice::Config>(
+        SD_CS_PIN,                         // CS pin (IO5 on the module)
+        GPIO_NUM_NC,                           // MOSI override: leave NC to use SPI host pins
+        GPIO_NUM_NC,                           // MISO override: leave NC
+        GPIO_NUM_NC,                           // SCLK override: leave NC
+        SdCardDevice::MountBehaviour::AtBoot,
+        std::make_shared<tt::Mutex>(tt::Mutex::Type::Recursive),
+        std::vector<gpio_num_t>(),
+        SD_SPI_HOST                        // SPI host for SD card (SPI3_HOST)
+    );
+
+    return std::make_shared<SpiSdCardDevice>(
+        std::move(configuration)
+    );
+}

Boards/cyd-e32r32p/Source/devices/SdCard.h

@@ -0,0 +1,13 @@
+#pragma once
+
+#include <Tactility/hal/sdcard/SdCardDevice.h>
+#include "driver/gpio.h"
+#include "driver/spi_common.h"
+
+using tt::hal::sdcard::SdCardDevice;
+
+// SD card (microSD)
+constexpr auto SD_CS_PIN = GPIO_NUM_5;
+constexpr auto SD_SPI_HOST = SPI3_HOST;
+
+std::shared_ptr<SdCardDevice> createSdCard();

Boards/cyd-jc2432w328c/Source/Configuration.cpp

@@ -1,4 +1,3 @@
-#include "JC2432W328C.h"
 #include "devices/Display.h"
 #include "devices/SdCard.h"
 
@@ -8,8 +7,6 @@
 
 using namespace tt::hal;
 
-#define CYD_SPI_TRANSFER_SIZE_LIMIT (JC2432W328C_LCD_DRAW_BUFFER_SIZE * LV_COLOR_DEPTH / 8)
-
 static bool initBoot() {
     //Set the RGB Led Pins to output and turn them off
     ESP_ERROR_CHECK(gpio_set_direction(GPIO_NUM_4, GPIO_MODE_OUTPUT)); //Red
@@ -21,7 +18,7 @@ static bool initBoot() {
     ESP_ERROR_CHECK(gpio_set_level(GPIO_NUM_16, 1)); //Green
     ESP_ERROR_CHECK(gpio_set_level(GPIO_NUM_17, 1)); //Blue
 
-    return driver::pwmbacklight::init(JC2432W328C_LCD_PIN_BACKLIGHT);
+    return driver::pwmbacklight::init(LCD_PIN_BACKLIGHT);
 }
 
 static DeviceVector createDevices() {
@@ -31,7 +28,7 @@ static DeviceVector createDevices() {
     };
 }
 
-const Configuration cyd_jc2432w328c_config = {
+extern const Configuration hardwareConfiguration = {
     .initBoot = initBoot,
     .createDevices = createDevices,
     .i2c = {
@@ -88,7 +85,7 @@ const Configuration cyd_jc2432w328c_config = {
                 .data6_io_num = GPIO_NUM_NC,
                 .data7_io_num = GPIO_NUM_NC,
                 .data_io_default_level = false,
-                .max_transfer_sz = CYD_SPI_TRANSFER_SIZE_LIMIT,
+                .max_transfer_sz = LCD_SPI_TRANSFER_SIZE_LIMIT,
                 .flags = 0,
                 .isr_cpu_id = ESP_INTR_CPU_AFFINITY_AUTO,
                 .intr_flags = 0

Boards/cyd-jc2432w328c/Source/devices/Display.cpp

@@ -0,0 +1,42 @@
+#include "Display.h"
+
+#include <Cst816Touch.h>
+#include <PwmBacklight.h>
+#include <St7789Display.h>
+
+static std::shared_ptr<tt::hal::touch::TouchDevice> createTouch() {
+    auto configuration = std::make_unique<Cst816sTouch::Configuration>(
+        I2C_NUM_0,
+        LCD_HORIZONTAL_RESOLUTION,
+        LCD_VERTICAL_RESOLUTION
+    );
+
+    return std::make_shared<Cst816sTouch>(std::move(configuration));
+}
+
+std::shared_ptr<tt::hal::display::DisplayDevice> createDisplay() {
+    St7789Display::Configuration panel_configuration = {
+        .horizontalResolution = LCD_HORIZONTAL_RESOLUTION,
+        .verticalResolution = LCD_VERTICAL_RESOLUTION,
+        .gapX = 0,
+        .gapY = 0,
+        .swapXY = false,
+        .mirrorX = false,
+        .mirrorY = false,
+        .invertColor = false,
+        .bufferSize = LCD_BUFFER_SIZE,
+        .touch = createTouch(),
+        .backlightDutyFunction = driver::pwmbacklight::setBacklightDuty,
+        .resetPin = GPIO_NUM_NC
+    };
+
+    auto spi_configuration = std::make_shared<St7789Display::SpiConfiguration>(St7789Display::SpiConfiguration {
+        .spiHostDevice = LCD_SPI_HOST,
+        .csPin = LCD_PIN_CS,
+        .dcPin = LCD_PIN_DC,
+        .pixelClockFrequency = 62'500'000,
+        .transactionQueueDepth = 10
+    });
+
+    return std::make_shared<St7789Display>(panel_configuration, spi_configuration);
+}