fix(es3c28p): address PR#569 feedback - CYD vendor, explicit srcs, no HAL

- device.properties: vendor LCDWIKI -> CYD (lcdwiki is info source, per Ken)
- device.properties: dependencies.useDeprecatedHal=false
- CMakeLists.txt: GLOB_RECURSE -> explicit SRCS "source/module.cpp", REQUIRES TactilityKernel only
- source/module.cpp: remove Tactility/hal/Configuration.h and hardwareConfiguration placeholder
- Verified: boots on ES3C28P /dev/cu.usbmodem101, touch/display/audio/SD ok

Devices/es3c28p/CMakeLists.txt

@@ -0,0 +1,4 @@
+idf_component_register(
+    SRCS "source/module.cpp"
+    REQUIRES TactilityKernel
+)

Devices/es3c28p/device.properties

@@ -0,0 +1,23 @@
+general.vendor=CYD
+general.name=ES3C28P
+
+apps.launcherAppId=Launcher
+
+hardware.target=ESP32S3
+hardware.flashSize=16MB
+hardware.spiRam=true
+hardware.spiRamMode=OCT
+hardware.spiRamSpeed=120M
+hardware.esptoolFlashFreq=120M
+hardware.tinyUsb=true
+hardware.bluetooth=true
+
+display.size=2.8"
+display.shape=rectangle
+display.dpi=143
+
+lvgl.colorDepth=16
+
+storage.userDataLocation=SD
+
+dependencies.useDeprecatedHal=false

Devices/es3c28p/devicetree.yaml

@@ -0,0 +1,7 @@
+dependencies:
+  - Platforms/platform-esp32
+  - Drivers/ili9341-module
+  - Drivers/ft5x06-module
+  - Drivers/es8311-module
+  - Drivers/audio-stream-module
+dts: es3c28p.dts

Devices/es3c28p/es3c28p.dts

@@ -0,0 +1,142 @@
+/dts-v1/;
+
+#include <tactility/bindings/root.h>
+#include <tactility/bindings/esp32_adc_oneshot.h>
+#include <tactility/bindings/esp32_ble.h>
+#include <tactility/bindings/esp32_gpio.h>
+#include <tactility/bindings/esp32_i2c.h>
+#include <tactility/bindings/esp32_i2s.h>
+#include <tactility/bindings/esp32_pwm_ledc.h>
+#include <tactility/bindings/esp32_sdmmc.h>
+#include <tactility/bindings/esp32_spi.h>
+#include <tactility/bindings/esp32_wifi_pinned.h>
+#include <tactility/bindings/battery_sense.h>
+#include <tactility/bindings/gpio_hog.h>
+#include <tactility/bindings/pwm_backlight.h>
+#include <bindings/ili9341.h>
+#include <bindings/ft5x06.h>
+#include <bindings/es8311.h>
+
+/ {
+	compatible = "root";
+	model = "LCDWIKI ES3C28P";
+
+	wifi0 {
+		compatible = "espressif,esp32-wifi-pinned";
+		status = "disabled";
+	};
+
+	ble0 {
+		compatible = "espressif,esp32-ble";
+		status = "disabled";
+	};
+
+	gpio0 {
+		compatible = "espressif,esp32-gpio";
+		gpio-count = <49>;
+	};
+
+	/* FM8002E speaker amp enable, active-low on GPIO1 */
+	amp_enable {
+		compatible = "gpio-hog";
+		pin = <&gpio0 1 GPIO_FLAG_NONE>;
+		mode = <GPIO_HOG_MODE_OUTPUT_LOW>;
+	};
+
+	adc0 {
+		compatible = "espressif,esp32-adc-oneshot";
+		unit-id = <ADC_UNIT_1>;
+		clk-src = <ADC_RTC_CLK_SRC_DEFAULT>;
+		channels = <ADC_CHANNEL_8 ADC_ATTEN_DB_12 ADC_BITWIDTH_DEFAULT>;
+	};
+
+	/* BAT+ through 200K/200K divider into GPIO9 ADC1_CH8 */
+	battery-sense {
+		compatible = "battery-sense";
+		io-channel = <&adc0 0>;
+		reference-voltage-mv = <3300>;
+		multiplier = <2000>;
+	};
+
+	/* i2s0 must be before i2c0 so codec can reference it */
+	i2s0 {
+		compatible = "espressif,esp32-i2s";
+		port = <I2S_NUM_0>;
+		pin-bclk = <&gpio0 5 GPIO_FLAG_NONE>;
+		pin-ws = <&gpio0 7 GPIO_FLAG_NONE>;
+		pin-data-out = <&gpio0 8 GPIO_FLAG_NONE>;
+		pin-data-in = <&gpio0 6 GPIO_FLAG_NONE>;
+		pin-mclk = <&gpio0 4 GPIO_FLAG_NONE>;
+	};
+
+	i2c0 {
+		compatible = "espressif,esp32-i2c";
+		port = <I2C_NUM_0>;
+		clock-frequency = <100000>;
+		pin-sda = <&gpio0 16 GPIO_FLAG_NONE>;
+		pin-scl = <&gpio0 15 GPIO_FLAG_NONE>;
+
+		ft5x06@38 {
+			compatible = "focaltech,ft5x06";
+			reg = <0x38>;
+			x-max = <240>;
+			y-max = <320>;
+			swap-xy;
+			mirror-x;
+			pin-reset = <&gpio0 18 GPIO_FLAG_NONE>;
+			pin-interrupt = <&gpio0 17 GPIO_FLAG_NONE>;
+		};
+
+		es8311: es8311@18 {
+			compatible = "everest,es8311";
+			reg = <0x18>;
+			i2s = <&i2s0>;
+		};
+	};
+
+	display_backlight_pwm {
+		compatible = "espressif,esp32-pwm-ledc";
+		pin = <&gpio0 45 GPIO_FLAG_NONE>;
+		period-ns = <500000>;
+		ledc-timer = <0>;
+		ledc-channel = <0>;
+	};
+
+	display_backlight {
+		compatible = "pwm-backlight";
+		status = "disabled";
+		pwm = <&display_backlight_pwm>;
+	};
+
+	spi0 {
+		compatible = "espressif,esp32-spi";
+		host = <SPI2_HOST>;
+		pin-mosi = <&gpio0 11 GPIO_FLAG_NONE>;
+		pin-sclk = <&gpio0 12 GPIO_FLAG_NONE>;
+		cs-gpios = <&gpio0 10 GPIO_FLAG_NONE>;
+
+		display@0 {
+			compatible = "ilitek,ili9341";
+			horizontal-resolution = <320>;
+			vertical-resolution = <240>;
+			swap-xy;
+			invert-color;
+			bgr-order;
+			pixel-clock-hz = <40000000>;
+			pin-dc = <&gpio0 46 GPIO_FLAG_NONE>;
+			backlight = <&display_backlight>;
+		};
+	};
+
+	sdmmc0 {
+		compatible = "espressif,esp32-sdmmc";
+		pin-clk = <&gpio0 38 GPIO_FLAG_NONE>;
+		pin-cmd = <&gpio0 40 GPIO_FLAG_NONE>;
+		pin-d0 = <&gpio0 39 GPIO_FLAG_NONE>;
+		pin-d1 = <&gpio0 41 GPIO_FLAG_NONE>;
+		pin-d2 = <&gpio0 48 GPIO_FLAG_NONE>;
+		pin-d3 = <&gpio0 47 GPIO_FLAG_NONE>;
+		slot = <SDMMC_HOST_SLOT_1>;
+		bus-width = <4>;
+	};
+};

Devices/es3c28p/source/module.cpp

@@ -0,0 +1,21 @@
+#include <tactility/module.h>
+
+extern "C" {
+
+static error_t start() {
+    return ERROR_NONE;
+}
+
+static error_t stop() {
+    return ERROR_NONE;
+}
+
+struct Module es3c28p_module = {
+    .name = "es3c28p",
+    .start = start,
+    .stop = stop,
+    .symbols = nullptr,
+    .internal = nullptr
+};
+
+}