- es8311 driver open() now allows OUTPUT->INPUT complementary (promotes to BOTH) when same native rate 44100
- audio-stream close_stream() ref-counts shared BOTH codec (don't close if other direction still open)
- MCP recordVoice + VoiceRecorder app explicitly unmute and set 100% gain
Fixes mic input not working - was returning ERROR_RESOURCE when output already open
- SupportedFiles: add isSupportedAudioFile (.mp3/.wav/.ogg/.flac)
- Files View::viewFile: if audio file, loader->start one.tactility.mp3player with file bundle
- Tactility.cpp: hide mcpoverride (screensaver internal), keep mcpsettings visible
- Fixes MP3 no longer running from file explorer, plus audio fast playback already fixed via audio-stream (Mp3Player/BookPlayer/VoiceRecorder use audio_stream_open_output not direct i2s_controller_write)
- MCP dev coexistence already fixed: DisplayIdle lock inversion 3629ffef, WebServer serverEnabled=ws||mcp, unauth /api/mcp, video 8081/8083 vs dev 6666
- Restore MCP system (McpSystem 1900+ LOC, McpHandler, McpScreensaver, McpSettings, McpOverride apps)
- Use audio-stream instead of direct I2S for MP3 playback (fixes fast playback, uses native resampler)
- Register McpSettings + McpOverride in Tactility.cpp so Settings shows MCP Screen
- DisplaySettings: add ScreensaverType::McpScreen and disableScreensaverWhenCharging flag
- Display app: add 'Disable on charging' toggle, handles McpScreen screensaver type
- DisplayIdle: skip screensaver while charging, support McpScreen screensaver, isDeviceCharging check via PowerDevice
- WebServer: coexistence with MCP (McpHandler)
- Avoid formatting churn from previous commits
Squashed from range eaa248b0..8970143f (6 commits) into single clean commit
Migrated devices to kernel drivers:
- guition-jc3248w535c
- m5stack-core2
- m5stack-cores3
- m5stack-papers3
New drivers:
- axp192-module
- axp2101-module
Fixes:
- Fix SD card LDO for P4 devices
- Updated PowerOff app to work with kernel displays
- Fix for `lvgl_try_lock()` timing
- Fix for touch events with slow updating displays
Improvements:
- `GuiService` now keeps trying to lock to prevent silent failures caused by drivers.
- `GuiService` now uses lvgl-module calls for locking/unlocking
- display driver now has capability `DISPLAY_CAPABILITY_SLOW_REFRESH`
- RGB display driver added
- display_driver API:
- Added software-based display rotation for screens without hardware rotation support.
- Improved display capability detection across supported display drivers.
- lvgl_display driver:
- Improved framebuffer handling for smoother, more reliable display updates.
- Display gap and rotation behavior now adapts more accurately to hardware capabilities.
- Migration Crowpanel 5" basic & advance to kernel drivers
- Improve KernelDisplay app: brightness controls are hidden for displays that only support on/off operation
- device.py now allows for (non-ambiguous) partial device IDs
- TactilityKernel: Implement more tests
- Added kernel base drivers for: display, pointer (touch, mouse, etc.), keyboard, adc, power supply and backlight
- Implement new kernel driver modules: `st7789-module` and `gt911-module`
- Implement ESP32 ADC "oneshot" kernel driver
- Implement ESP32 backlight kernel driver with ledc API
- Implemented `battery-sense` driver that allows for voltage measurement and creates a power supply child device
- Updated github actions
- Updated flash scripts
- Fix for esp32 legacy driver conflict with ADC
- Created separate `lilygo-tdeck` and `lilygo-tdeck-plus` devices
- Created `lilygo-module` with LilyGO kernel drivers
- Fix for intermittent errors in build related to code generation of `devicetree.c`
- `lvgl-module` can now map kernel drivers onto LVGL devices
- Created `KernelDisplayApp` as a mirror of `HalDisplayApp` (formerly `DisplayApp`)
- Removed `struct` and `enum` prefix in a lot of kernel driver cpp source files
- `lilygo-tdeck` and `lilygo-tdeck-plus` are now fully relying on kernel drivers and don't use any of the old HAL
* Tab5 camera + other stuff
Tab5 camera driver - SC2356
Custom SliderBox widget - slider with plus and minus buttons + value label and snapping
Rtc Time service + rtc api
Sdk release - only include drivers built for that specific target, eg: sc2356 driver is mipi / p4 only.
No more hardcoded manual sdk cmakelists
New function to find device by compatible string match. no more static cast bool wildness when trying to match a single device (like M5Stack PaperS3 for example)
* feedback + fixes
Fixed external app user data path.
fix(gui): block app teardown until onHide() completes, preventing ELF unload racing a still-running app
added camera device type and api
* drain the snake sssem
---------
Co-authored-by: Ken Van Hoeylandt <git@kenvanhoeylandt.net>
- Fixed crash when returning to Setup app (from any of the steps)
- Fixed crash when returning to TimeDateSettings app (after locale selection)
- Fixed GuiService inconsistent behaviour: now always perform operations async (e.g. to show/hide apps). This fixes crashes in some onHide() calls where onHide() might be called before onShow() was called.
- Fix for incorrect WebServService path
- Remove CYD-4848S040C SD card functionality, but added a GPIO fix for releasing 3-wire SPI pin sharing.
- Fix for saving/loading settings for various apps
- Implement Setup app for device's first boot
- Implement device simple name and vendor name variables
- Remove region setting (locale setting is already available)
- Disable BlueTooth driver by default, to ensure it doesn't allocate memory
- Update BlueTooth settings app behaviour to make sure it starts/stops the devices
- Disable SPI RAM usage for ST7789 as it broke App Hub
- Reduce T-Display and T-Deck display buffers from 1/3rd to 1/10th of resolution
- Enabled dynamic buffers for MbedTLS to optimize memory
- TLS 1.3 did not work with dynamic buffers: downgrade to 1.2 for now
- WiFi is now enabled from the Boot app callback to the WiFi service, instead of the WiFi service start() function. This avoids a lockup when WiFi is started by the service while the Boot app is updating the WiFi settings.
- New drivers:
- SD SPI
- spi_peripheral
- touch_placeholder
- display_placeholder
- Devicetree compiler:
- Implement phandle-arrays
- Implement device addresses
- Add placeholder drivers to all devices with a SPI display
- SPI driver: add `cs-pins` and set them to high on driver start
- FileSystem: add `file_system_set_owner()` and `file_system_get_owner()`
- File locking is now checking if the related `FileSystem` is part of a shared SPI bus
- Add `device_get_child_count()`
- SDMMC driver: Remove default of `slot` value
- Fix for Crowpanel Basic 3.5" display (add delay to booting)
- Fix for LilyGO T-HMI SD card mounting (delayed mounting by disabling it initially in the dts)
* Bluetooth LE addition
* fixes
* use the psram!
helps a little on S3 (t-deck)
* custom device name
* Update symbols.c
* Feedback + fixes
Fixes external app start/stop server (child devices)
Fixes BtManage causing a full system hang upon disabling bt when a device is connected to the host.
* updoot
* more updoot
* move back!
* Revert "move back!"
This reverts commit d3694365c634acc5db62ac59771c496cb971a727.
* fix some of the things
* Addressing feedback? hmm
* Fixes
Bug 1 — Reconnect loop / Reconnect not working fixed
Bug 2 — Name-only advertising overwrites HID advertising
Bug 3 — BleHidDeviceCtx leak on re-enable
Enhancement — HID device auto-start on radio re-enable
* stuff...
* update for consistency with others
* fix crashes
and some bonus symbols
* a few symbols, i2c speed, cdn message
100kHz i2c speed seems to be more compatible with m5stack modules...and probably in general.
cdn message no longer applies
* Hide BT Settings when bt not enabled
* Addressing things and device fixes
* Missed one!
* stuff
* Optional internal pull-ups for SD/MMC pins in DTS
* Selectable on‑chip LDO channel for SD/MMC power (can be disabled)
* Added several sensor/driver modules to generic ESP32 device configurations so that they become part of the SDKs
* SD card mount now prints card information for clearer diagnostics
* Fix for bug DTS boolean parsing. Improved tests to catch these issues.
* Expanded SDK integration test to include new modules and headers
* Modularized packaging to generate per‑module build files and include driver assets
- UiDensity moved to lvgl-module
- Deleted tt_hal and tt_hal_gpio (breaks apps, but will fix those right after merging)
- Added I2C 8 bit register operations
- Added device.properties to simulator
- Improved Tab5 hardware init, implement audio
- Add README.md to kernel
**New Features**
* Runtime font accessors and new symbol fonts for text, launcher, statusbar, and shared icons.
* Added font height base setting to device.properties
* Text fonts now have 3 sizes: small, default, large
**Improvements**
* Renamed `UiScale` to `UiDensity`
* Statusbar, toolbar and many UI components now compute heights and spacing from fonts/density.
* SSD1306 initialization sequence refined for more stable startup.
* Multiple image assets replaced by symbol-font rendering.
* Many layout improvements related to density, font scaling and icon scaling
* Updated folder name capitalization for newer style
* **New Features**
* Added Material Design symbol fonts and LVGL font aliases for launcher, status bar, and shared UI icons.
* **Style**
* Migrated app icons across the UI to the new symbol font system.
* Updated launcher button sizing, font styling, recoloring and icon text color for consistency.
* Default text/icon font macros set for consistent sizing across the UI.
* **Documentation**
* Updated third‑party notices to include Material Design Icons links.
Auto starts the web server in AP mode with generated SSID and Password.
For small devices.... or any i guess.
Hidden by default.
May need adjustments to suit even smaller screens than the waveshare GEEK.
And a few symbols for good measure. :)
* **Refactor**
* GPIO subsystem moved to a descriptor-based model for per-pin ownership and runtime pin management; many platform drivers now acquire/release descriptors.
* Device trees and drivers now use GPIO phandle-style pin specifications across all boards and all drivers.
* **Behavior**
* Device list now encodes per-device status (ok/disabled); boot will skip disabled devices accordingly.
* **Deprecation**
* Legacy GPIO HAL marked deprecated and replaced with descriptor-based interfaces.
* **Chores**
* Bindings and platform configs updated to the new GPIO pin-spec format.
* Updated runtime gating to enable LilyGO T-Deck specific apps and services
* New device compatibility and model-detection APIs
* Added a buffer-overflow error code and message
* Updated GitHub Actions checkout to v4
* Adjusted an LVGL-related library version
* Device config now emits a T-Deck workaround flag when applicable
* Removed internal developer comments and minor cleanups
- Implement SPI devices in dts files for all devices
- Removed `tt::hal::spi` HAL and its configurations
- Fix for devicetree generator "boolean" support
- Remove unused custom locks in all `DisplayDevice` implementations
- Fixed some bugs with devices
- Updated XPT2046 driver
- Fix for `WifiEsp` deadlock
- Export a lot of new `math.h` symbols with `tt_init.cpp`
- Created `SpiDeviceLock` in `TactilityCore` as a wrapper for kernel SPI locking
- Improved `TactilityKernel` SPI driver.
- Add kernel support for SPI driver
- Add kernel support for UART driver
- Implemented ESP32 UART kernel driver
- Update existing UART-related code in Tactility to use new kernel driver
- Remove UART from tt::hal::Configuration
- Remove tt_hal_uart functionality but keep functions for now
- Update devicetrees for UART changes
- Kernel mutex and recursive mutex: improved locking API design
- Other kernel improvements
- Added device_exists_of_type() and device_find_by_name()
* Implement pagination for file entries in View class
* Add resolveDirentFromListIndex method and refactor entry handling in View class
* Fix current_start_index calculation in View::update to prevent out-of-bounds access
Adolfo Reyna