Migrated devices to kernel drivers:
- guition-jc3248w535c
- m5stack-core2
- m5stack-cores3
- m5stack-papers3
New drivers:
- axp192-module
- axp2101-module
Fixes:
- Fix SD card LDO for P4 devices
- Updated PowerOff app to work with kernel displays
- Fix for `lvgl_try_lock()` timing
- Fix for touch events with slow updating displays
Improvements:
- `GuiService` now keeps trying to lock to prevent silent failures caused by drivers.
- `GuiService` now uses lvgl-module calls for locking/unlocking
- display driver now has capability `DISPLAY_CAPABILITY_SLOW_REFRESH`
* **New Features**
* Added native display support for ST7796, ILI9341, and ST7789 panels across supported boards.
* Added FT5x06 and FT6x36 touchscreen support.
* Generic PWM driver
* ESP32 PWM driver
* Generic RGB LED driver
* RGB PWM LED driver
* RGB GPIO LED driver
* Implementation of RGB LED for various boards
* **Improvements**
* Updated board hardware descriptions to use explicit display/touch/backlight device-tree bindings and disabled deprecated HAL usage.
* Improved display and touch-driver cleanup to prevent stale resources and improve shutdown reliability.
* Pinned esp-hosted library to a fixed version
* **Deletions**
* Obsolete placeholder display
* Legacy ILI9488 support.
* ESP32-specific LEDC PWM implementation
- RGB display driver added
- display_driver API:
- Added software-based display rotation for screens without hardware rotation support.
- Improved display capability detection across supported display drivers.
- lvgl_display driver:
- Improved framebuffer handling for smoother, more reliable display updates.
- Display gap and rotation behavior now adapts more accurately to hardware capabilities.
- Migration Crowpanel 5" basic & advance to kernel drivers
- Improve KernelDisplay app: brightness controls are hidden for displays that only support on/off operation
- device.py now allows for (non-ambiguous) partial device IDs
- TactilityKernel: Implement more tests
- Added modular device support and devicetree bindings for ILI9341, ILI9488, CST816S, XPT2046, and GPIO button input, updating several board configurations for display/touch/backlight/keyboard/battery.
- Added a setting to control deprecated HAL usage (device property + Kconfig).
- Added kernel base drivers for: display, pointer (touch, mouse, etc.), keyboard, adc, power supply and backlight
- Implement new kernel driver modules: `st7789-module` and `gt911-module`
- Implement ESP32 ADC "oneshot" kernel driver
- Implement ESP32 backlight kernel driver with ledc API
- Implemented `battery-sense` driver that allows for voltage measurement and creates a power supply child device
- Updated github actions
- Updated flash scripts
- Fix for esp32 legacy driver conflict with ADC
- Created separate `lilygo-tdeck` and `lilygo-tdeck-plus` devices
- Created `lilygo-module` with LilyGO kernel drivers
- Fix for intermittent errors in build related to code generation of `devicetree.c`
- `lvgl-module` can now map kernel drivers onto LVGL devices
- Created `KernelDisplayApp` as a mirror of `HalDisplayApp` (formerly `DisplayApp`)
- Removed `struct` and `enum` prefix in a lot of kernel driver cpp source files
- `lilygo-tdeck` and `lilygo-tdeck-plus` are now fully relying on kernel drivers and don't use any of the old HAL
* Tab5 camera + other stuff
Tab5 camera driver - SC2356
Custom SliderBox widget - slider with plus and minus buttons + value label and snapping
Rtc Time service + rtc api
Sdk release - only include drivers built for that specific target, eg: sc2356 driver is mipi / p4 only.
No more hardcoded manual sdk cmakelists
New function to find device by compatible string match. no more static cast bool wildness when trying to match a single device (like M5Stack PaperS3 for example)
* feedback + fixes
Fixed external app user data path.
fix(gui): block app teardown until onHide() completes, preventing ELF unload racing a still-running app
added camera device type and api
* drain the snake sssem
---------
Co-authored-by: Ken Van Hoeylandt <git@kenvanhoeylandt.net>
- Disable BlueTooth driver by default, to ensure it doesn't allocate memory
- Update BlueTooth settings app behaviour to make sure it starts/stops the devices
- Disable SPI RAM usage for ST7789 as it broke App Hub
- Reduce T-Display and T-Deck display buffers from 1/3rd to 1/10th of resolution
- Enabled dynamic buffers for MbedTLS to optimize memory
- TLS 1.3 did not work with dynamic buffers: downgrade to 1.2 for now
- WiFi is now enabled from the Boot app callback to the WiFi service, instead of the WiFi service start() function. This avoids a lockup when WiFi is started by the service while the Boot app is updating the WiFi settings.
- New drivers:
- SD SPI
- spi_peripheral
- touch_placeholder
- display_placeholder
- Devicetree compiler:
- Implement phandle-arrays
- Implement device addresses
- Add placeholder drivers to all devices with a SPI display
- SPI driver: add `cs-pins` and set them to high on driver start
- FileSystem: add `file_system_set_owner()` and `file_system_get_owner()`
- File locking is now checking if the related `FileSystem` is part of a shared SPI bus
- Add `device_get_child_count()`
- SDMMC driver: Remove default of `slot` value
- Fix for Crowpanel Basic 3.5" display (add delay to booting)
- Fix for LilyGO T-HMI SD card mounting (delayed mounting by disabling it initially in the dts)
* Bluetooth LE addition
* fixes
* use the psram!
helps a little on S3 (t-deck)
* custom device name
* Update symbols.c
* Feedback + fixes
Fixes external app start/stop server (child devices)
Fixes BtManage causing a full system hang upon disabling bt when a device is connected to the host.
* updoot
* more updoot
* move back!
* Revert "move back!"
This reverts commit d3694365c634acc5db62ac59771c496cb971a727.
* fix some of the things
* Addressing feedback? hmm
* Fixes
Bug 1 — Reconnect loop / Reconnect not working fixed
Bug 2 — Name-only advertising overwrites HID advertising
Bug 3 — BleHidDeviceCtx leak on re-enable
Enhancement — HID device auto-start on radio re-enable
* stuff...
* update for consistency with others
* fix crashes
and some bonus symbols
* a few symbols, i2c speed, cdn message
100kHz i2c speed seems to be more compatible with m5stack modules...and probably in general.
cdn message no longer applies
* Hide BT Settings when bt not enabled
* Addressing things and device fixes
* Missed one!
* stuff
Font size set to 18 for 800x480 displays
Fix web server dashboard not rendering when sdcard isn't present
Added new driver modules
- BM8563 RTC
- RX8130CE RTC
- MPU6886 IMU
- QMI8658 IMU
- M5PM1 Power Management Chip
Applied the above modules to applicable devicetrees.
Added new device: M5Stack StickS3
Added new M5Stack Tab5 St7123 variant.
ButtonControl changed to use interupts and xQueue, added AppClose action.
And some bonus symbols of course, the apps are hungry for symbols.
- UiDensity moved to lvgl-module
- Deleted tt_hal and tt_hal_gpio (breaks apps, but will fix those right after merging)
- Added I2C 8 bit register operations
- Added device.properties to simulator
- Improved Tab5 hardware init, implement audio
- Add README.md to kernel
**New Features**
* Runtime font accessors and new symbol fonts for text, launcher, statusbar, and shared icons.
* Added font height base setting to device.properties
* Text fonts now have 3 sizes: small, default, large
**Improvements**
* Renamed `UiScale` to `UiDensity`
* Statusbar, toolbar and many UI components now compute heights and spacing from fonts/density.
* SSD1306 initialization sequence refined for more stable startup.
* Multiple image assets replaced by symbol-font rendering.
* Many layout improvements related to density, font scaling and icon scaling
* Updated folder name capitalization for newer style
Shadowtrance