Board implementations and fixes (#247)

- Implemented Elecrow Crowpanel Basic 5.0" - Implemented Elecrow Crowpanel Advance 5.0" - Implemented CYD 2432S032C - Fix for CYD 4848S040C rendering drift (lower transfer speed) - Fix for SD card locking mechanism for various boards
2025-03-14 22:37:09 +01:00
parent 21936f7e9e
commit f85d0239ff
64 changed files with 1587 additions and 134 deletions
@@ -0,0 +1,91 @@
+#include "hal/CrowPanelDisplay.h"
+#include "hal/CrowPanelSdCard.h"
+
+#include <PwmBacklight.h>
+#include <Tactility/hal/Configuration.h>
+
+using namespace tt::hal;
+
+bool initBoot() {
+    return driver::pwmbacklight::init(GPIO_NUM_2);
+}
+
+extern const Configuration crowpanel_basic_50 = {
+    .initBoot = initBoot,
+    .createDisplay = createDisplay,
+    .sdcard = createSdCard(),
+    .i2c = {
+        // There is only 1 (internal for touch, and also serves as "I2C-OUT" port)
+        // Note: You could repurpose 1 or more UART interfaces as I2C interfaces
+        i2c::Configuration {
+            .name = "Main",
+            .port = I2C_NUM_0,
+            .initMode = i2c::InitMode::ByTactility,
+            .isMutable = false,
+            .config = (i2c_config_t) {
+                .mode = I2C_MODE_MASTER,
+                .sda_io_num = GPIO_NUM_19,
+                .scl_io_num = GPIO_NUM_20,
+                .sda_pullup_en = true,
+                .scl_pullup_en = true,
+                .master = {
+                    .clk_speed = 400000
+                },
+                .clk_flags = 0
+            }
+        }
+    },
+    .spi {
+        // SD card
+        spi::Configuration {
+            .device = SPI2_HOST,
+            .dma = SPI_DMA_CH_AUTO,
+            .config = {
+                .mosi_io_num = GPIO_NUM_11,
+                .miso_io_num = GPIO_NUM_13,
+                .sclk_io_num = GPIO_NUM_12,
+                .quadwp_io_num = GPIO_NUM_NC,
+                .quadhd_io_num = GPIO_NUM_NC,
+                .data4_io_num = GPIO_NUM_NC,
+                .data5_io_num = GPIO_NUM_NC,
+                .data6_io_num = GPIO_NUM_NC,
+                .data7_io_num = GPIO_NUM_NC,
+                .data_io_default_level = false,
+                .max_transfer_sz = 8192,
+                .flags = 0,
+                .isr_cpu_id = ESP_INTR_CPU_AFFINITY_AUTO,
+                .intr_flags = 0
+            },
+            .initMode = spi::InitMode::ByTactility,
+            .isMutable = false,
+            .lock = nullptr
+        }
+    },
+    .uart {
+        // "UART1"
+        uart::Configuration {
+            .name = "UART1",
+            .port = UART_NUM_1,
+            .rxPin = GPIO_NUM_44,
+            .txPin = GPIO_NUM_43,
+            .rtsPin = GPIO_NUM_NC,
+            .ctsPin = GPIO_NUM_NC,
+            .rxBufferSize = 1024,
+            .txBufferSize = 1024,
+            .config = {
+                .baud_rate = 115200,
+                .data_bits = UART_DATA_8_BITS,
+                .parity    = UART_PARITY_DISABLE,
+                .stop_bits = UART_STOP_BITS_1,
+                .flow_ctrl = UART_HW_FLOWCTRL_DISABLE,
+                .rx_flow_ctrl_thresh = 0,
+                .source_clk = UART_SCLK_DEFAULT,
+                .flags = {
+                    .allow_pd = 0,
+                    .backup_before_sleep = 0,
+                }
+            }
+        }
+    },
+    .gps = {}
+};