Device migrations, drivers and fixes (#571)

Device migrations:

- cyd-4848S040c
- guition-jc1060p470ciwy
- guition-jc2432w328c
- guition-jc3248w535c (known issue with display and touch, Shadowtrance will look into it)
- guition-jc8048w550c
- heltec-wifi-lora-32-v3
- lilygo-tdeck-max (excluding graphics)
- lilygo-tdisplay
- lilygo-tdisplay-s3
- lilygo-tdongle-s3
- lilygo-tlora-pager

Driver migrations:

- Implemented haptic driver interface in kernel
- AXS15231b
- BQ25896
- BQ27220
- CST328
- CST6xx
- DRV2605
- JD9165
- Custom LilyGO driver for T-Lora Pager
- SSD1306
- ST7701
- ST7735
- SY6970
- TCA8418

Fixes/improvements:

- Boot app: support for multiple power devices, improved UI
- lvgl_devices and related code: fixes for mapping
- Support for arrays in dts parser

Drivers/ssd1306-module/include/drivers/ssd1306.h

@@ -0,0 +1,38 @@
+// SPDX-License-Identifier: Apache-2.0
+#pragma once
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#include <stdint.h>
+#include <stdbool.h>
+
+#include <tactility/device.h>
+#include <tactility/drivers/gpio.h>
+
+struct Ssd1306Config {
+    // Devicetree address hint - unlike this repo's other I2C touch chips (which sit at a fixed
+    // address), the SSD1306's address genuinely varies by hardware strap (0x3C or 0x3D), so this
+    // is actually used, not just documentation.
+    uint8_t address;
+    uint16_t horizontal_resolution;
+    uint16_t vertical_resolution;
+    bool invert_color;
+
+    // Reset pin. GPIO_PIN_SPEC_NONE skips the reset toggle entirely.
+    struct GpioPinSpec pin_reset;
+    bool reset_active_high;
+
+    // See the 'power-on-delay-ms' binding property.
+    uint32_t power_on_delay_ms;
+
+    // Custom vendor init sequence: a flat list of command bytes, each sent as its own
+    // single-byte SSD1306 command. NULL/0 falls back to the standard esp_lcd_panel_init().
+    const uint8_t* init_sequence;
+    uint32_t init_sequence_length;
+};
+
+#ifdef __cplusplus
+}
+#endif