Device migrations, drivers and fixes (#571)

Device migrations:

- cyd-4848S040c
- guition-jc1060p470ciwy
- guition-jc2432w328c
- guition-jc3248w535c (known issue with display and touch, Shadowtrance will look into it)
- guition-jc8048w550c
- heltec-wifi-lora-32-v3
- lilygo-tdeck-max (excluding graphics)
- lilygo-tdisplay
- lilygo-tdisplay-s3
- lilygo-tdongle-s3
- lilygo-tlora-pager

Driver migrations:

- Implemented haptic driver interface in kernel
- AXS15231b
- BQ25896
- BQ27220
- CST328
- CST6xx
- DRV2605
- JD9165
- Custom LilyGO driver for T-Lora Pager
- SSD1306
- ST7701
- ST7735
- SY6970
- TCA8418

Fixes/improvements:

- Boot app: support for multiple power devices, improved UI
- lvgl_devices and related code: fixes for mapping
- Support for arrays in dts parser

Drivers/cst66xx-module/bindings/hynitron,cst66xx.yaml

@@ -0,0 +1,41 @@
+description: >
+  Hynitron CST66xx capacitive touch controller. Vendor docs for the LilyGO T-Deck Max label
+  this chip "CST328", but the vendor HynTouch driver probes cst66xx first and that is what
+  answers on that board. This is a minimal, single-touch port of the vendor's
+  hyn_cst66xx.c protocol.
+
+include: ["i2c-device.yaml"]
+
+compatible: "hynitron,cst66xx"
+
+bus: i2c
+
+properties:
+  x-max:
+    type: int
+    required: true
+    description: Maximum X coordinate reported by the controller (typically the panel's horizontal resolution)
+  y-max:
+    type: int
+    required: true
+    description: Maximum Y coordinate reported by the controller (typically the panel's vertical resolution)
+  swap-xy:
+    type: boolean
+    default: false
+    description: Swap the X and Y axes
+  mirror-x:
+    type: boolean
+    default: false
+    description: Mirror the X axis
+  mirror-y:
+    type: boolean
+    default: false
+    description: Mirror the Y axis
+  pin-reset:
+    type: phandles
+    required: true
+    description: Reset GPIO pin. The chip only re-initializes into normal reporting mode after a clean reset pulse.
+  reset-active-high:
+    type: boolean
+    default: false
+    description: Whether the reset pin is active high