Device migrations, drivers and fixes (#571)

Device migrations:

- cyd-4848S040c
- guition-jc1060p470ciwy
- guition-jc2432w328c
- guition-jc3248w535c (known issue with display and touch, Shadowtrance will look into it)
- guition-jc8048w550c
- heltec-wifi-lora-32-v3
- lilygo-tdeck-max (excluding graphics)
- lilygo-tdisplay
- lilygo-tdisplay-s3
- lilygo-tdongle-s3
- lilygo-tlora-pager

Driver migrations:

- Implemented haptic driver interface in kernel
- AXS15231b
- BQ25896
- BQ27220
- CST328
- CST6xx
- DRV2605
- JD9165
- Custom LilyGO driver for T-Lora Pager
- SSD1306
- ST7701
- ST7735
- SY6970
- TCA8418

Fixes/improvements:

- Boot app: support for multiple power devices, improved UI
- lvgl_devices and related code: fixes for mapping
- Support for arrays in dts parser

Drivers/axs15231b-module/include/drivers/axs15231b_display.h

@@ -0,0 +1,48 @@
+// SPDX-License-Identifier: Apache-2.0
+#pragma once
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#include <stdint.h>
+#include <stdbool.h>
+
+#include <tactility/device.h>
+#include <tactility/drivers/gpio.h>
+
+struct Axs15231bDisplayConfig {
+    uint16_t horizontal_resolution;
+    uint16_t vertical_resolution;
+    bool mirror_x;
+    bool mirror_y;
+    bool invert_color;
+    bool bgr_order;
+    uint32_t pixel_clock_hz;
+    uint32_t transaction_queue_depth;
+
+    // Reset pin. GPIO_PIN_SPEC_NONE means no reset line is wired up (matches the original
+    // deprecated-HAL config for the boards using this chip so far).
+    struct GpioPinSpec pin_reset;
+    bool reset_active_high;
+
+    // Optional Tearing-Effect GPIO pin. When set (not GPIO_PIN_SPEC_NONE), draw_bitmap() waits
+    // (best-effort, up to 20ms) for a V-blank pulse on this pin before starting each transfer, to
+    // reduce visible tearing. GPIO_PIN_SPEC_NONE skips TE sync entirely.
+    struct GpioPinSpec pin_te;
+
+    // Custom vendor init sequence, flattened as bytes: a run of
+    // [cmd, data_len, delay_ms, data_len bytes of data...] entries. NULL/0 falls back to the
+    // AXS15231B component's own built-in default sequence.
+    const uint8_t* init_sequence;
+    uint32_t init_sequence_length;
+
+    bool requires_full_frame;
+
+    // Optional reference to this display's backlight device, NULL if none.
+    struct Device* backlight;
+};
+
+#ifdef __cplusplus
+}
+#endif

Drivers/axs15231b-module/include/drivers/axs15231b_touch.h

@@ -0,0 +1,31 @@
+// SPDX-License-Identifier: Apache-2.0
+#pragma once
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#include <stdint.h>
+#include <stdbool.h>
+
+#include <tactility/device.h>
+#include <tactility/drivers/gpio.h>
+
+struct Axs15231bTouchConfig {
+    // Devicetree address hint. Unused by the driver: the AXS15231B always sits at a fixed
+    // I2C address (see ESP_LCD_TOUCH_IO_I2C_AXS15231B_ADDRESS in esp_lcd_axs15231b.h).
+    uint8_t address;
+    uint16_t x_max;
+    uint16_t y_max;
+    bool swap_xy;
+    bool mirror_x;
+    bool mirror_y;
+    struct GpioPinSpec pin_reset;
+    struct GpioPinSpec pin_interrupt;
+    bool reset_active_high;
+    bool interrupt_active_high;
+};
+
+#ifdef __cplusplus
+}
+#endif