Created Drivers folder with ILI934x subproject (#209)
Refactored all existing boards to re-use the ILI934x driver code.
This commit is contained in:
Ken Van Hoeylandt
committed by
GitHub
GitHub
parent
8ccba15c25
commit
c74006f8b6
@@ -1,4 +1,5 @@
|
||||
#include "YellowDisplay.h"
|
||||
#include "Ili934xDisplay.h"
|
||||
#include "YellowDisplayConstants.h"
|
||||
#include "YellowTouch.h"
|
||||
|
||||
@@ -58,106 +59,7 @@ static bool setBacklight(uint8_t duty) {
|
||||
return true;
|
||||
}
|
||||
|
||||
bool YellowDisplay::start() {
|
||||
TT_LOG_I(TAG, "Starting");
|
||||
|
||||
const esp_lcd_panel_io_spi_config_t panel_io_config = ILI9341_PANEL_IO_SPI_CONFIG(
|
||||
TWODOTFOUR_LCD_PIN_CS,
|
||||
TWODOTFOUR_LCD_PIN_DC,
|
||||
nullptr,
|
||||
nullptr
|
||||
);
|
||||
|
||||
if (esp_lcd_new_panel_io_spi((esp_lcd_spi_bus_handle_t)TWODOTFOUR_LCD_SPI_HOST, &panel_io_config, &ioHandle) != ESP_OK) {
|
||||
TT_LOG_E(TAG, "Failed to create panel");
|
||||
return false;
|
||||
}
|
||||
|
||||
const esp_lcd_panel_dev_config_t panel_config = {
|
||||
.reset_gpio_num = GPIO_NUM_NC,
|
||||
.rgb_ele_order = LCD_RGB_ELEMENT_ORDER_BGR,
|
||||
.data_endian = LCD_RGB_DATA_ENDIAN_LITTLE,
|
||||
.bits_per_pixel = TWODOTFOUR_LCD_BITS_PER_PIXEL,
|
||||
.flags = {
|
||||
.reset_active_high = false
|
||||
},
|
||||
.vendor_config = nullptr
|
||||
};
|
||||
|
||||
if (esp_lcd_new_panel_ili9341(ioHandle, &panel_config, &panelHandle) != ESP_OK) {
|
||||
TT_LOG_E(TAG, "Failed to create ili9341");
|
||||
return false;
|
||||
}
|
||||
|
||||
if (esp_lcd_panel_reset(panelHandle) != ESP_OK) {
|
||||
TT_LOG_E(TAG, "Failed to reset panel");
|
||||
return false;
|
||||
}
|
||||
|
||||
if (esp_lcd_panel_init(panelHandle) != ESP_OK) {
|
||||
TT_LOG_E(TAG, "Failed to init panel");
|
||||
return false;
|
||||
}
|
||||
|
||||
if (esp_lcd_panel_mirror(panelHandle, true, false) != ESP_OK) {
|
||||
TT_LOG_E(TAG, "Failed to set panel to mirror");
|
||||
return false;
|
||||
}
|
||||
|
||||
if (esp_lcd_panel_disp_on_off(panelHandle, true) != ESP_OK) {
|
||||
TT_LOG_E(TAG, "Failed to turn display on");
|
||||
return false;
|
||||
}
|
||||
|
||||
const lvgl_port_display_cfg_t disp_cfg = {
|
||||
.io_handle = ioHandle,
|
||||
.panel_handle = panelHandle,
|
||||
.control_handle = nullptr,
|
||||
.buffer_size = TWODOTFOUR_LCD_DRAW_BUFFER_SIZE,
|
||||
.double_buffer = false,
|
||||
.trans_size = 0,
|
||||
.hres = TWODOTFOUR_LCD_HORIZONTAL_RESOLUTION,
|
||||
.vres = TWODOTFOUR_LCD_VERTICAL_RESOLUTION,
|
||||
.monochrome = false,
|
||||
.rotation = {
|
||||
.swap_xy = false,
|
||||
.mirror_x = true,
|
||||
.mirror_y = false,
|
||||
},
|
||||
.color_format = LV_COLOR_FORMAT_RGB565,
|
||||
.flags = {
|
||||
.buff_dma = true,
|
||||
.buff_spiram = false,
|
||||
.sw_rotate = false,
|
||||
.swap_bytes = true,
|
||||
.full_refresh = false,
|
||||
.direct_mode = false
|
||||
}
|
||||
};
|
||||
|
||||
displayHandle = lvgl_port_add_disp(&disp_cfg);
|
||||
TT_LOG_I(TAG, "Finished");
|
||||
return displayHandle != nullptr;
|
||||
}
|
||||
|
||||
bool YellowDisplay::stop() {
|
||||
assert(displayHandle != nullptr);
|
||||
|
||||
lvgl_port_remove_disp(displayHandle);
|
||||
|
||||
if (esp_lcd_panel_del(panelHandle) != ESP_OK) {
|
||||
return false;
|
||||
}
|
||||
|
||||
if (esp_lcd_panel_io_del(ioHandle) != ESP_OK) {
|
||||
return false;
|
||||
}
|
||||
|
||||
displayHandle = nullptr;
|
||||
return true;
|
||||
}
|
||||
|
||||
void YellowDisplay::setBacklightDuty(uint8_t backlightDuty) {
|
||||
void setBacklightDuty(uint8_t backlightDuty) {
|
||||
if (!isBacklightInitialized) {
|
||||
tt_check(initBacklight());
|
||||
isBacklightInitialized = true;
|
||||
@@ -168,47 +70,23 @@ void YellowDisplay::setBacklightDuty(uint8_t backlightDuty) {
|
||||
}
|
||||
}
|
||||
|
||||
/**
|
||||
* Note:
|
||||
* The datasheet implies this should work, but it doesn't:
|
||||
* https://www.digikey.com/htmldatasheets/production/1640716/0/0/1/ILI9341-Datasheet.pdf
|
||||
*
|
||||
* This repo claims it only has 1 curve:
|
||||
* https://github.com/brucemack/hello-ili9341
|
||||
*
|
||||
* I'm leaving it in as I'm not sure if it's just my hardware that's problematic.
|
||||
*/
|
||||
void YellowDisplay::setGammaCurve(uint8_t index) {
|
||||
uint8_t gamma_curve;
|
||||
switch (index) {
|
||||
case 0:
|
||||
gamma_curve = 0x01;
|
||||
break;
|
||||
case 1:
|
||||
gamma_curve = 0x04;
|
||||
break;
|
||||
case 2:
|
||||
gamma_curve = 0x02;
|
||||
break;
|
||||
case 3:
|
||||
gamma_curve = 0x08;
|
||||
break;
|
||||
default:
|
||||
return;
|
||||
}
|
||||
const uint8_t param[] = {
|
||||
gamma_curve
|
||||
};
|
||||
|
||||
if (esp_lcd_panel_io_tx_param(ioHandle , LCD_CMD_GAMSET, param, 1) != ESP_OK) {
|
||||
TT_LOG_E(TAG, "Failed to set gamma");
|
||||
}
|
||||
}
|
||||
|
||||
std::shared_ptr<tt::hal::Touch> _Nullable YellowDisplay::createTouch() {
|
||||
return std::make_shared<YellowTouch>();
|
||||
}
|
||||
|
||||
std::shared_ptr<tt::hal::Display> createDisplay() {
|
||||
return std::make_shared<YellowDisplay>();
|
||||
|
||||
auto touch = std::make_shared<YellowTouch>();
|
||||
|
||||
auto configuration = std::make_unique<Ili934xDisplay::Configuration>(
|
||||
TWODOTFOUR_LCD_SPI_HOST,
|
||||
TWODOTFOUR_LCD_PIN_CS,
|
||||
TWODOTFOUR_LCD_PIN_DC,
|
||||
TWODOTFOUR_LCD_HORIZONTAL_RESOLUTION,
|
||||
TWODOTFOUR_LCD_VERTICAL_RESOLUTION,
|
||||
touch
|
||||
);
|
||||
|
||||
configuration->mirrorX = true;
|
||||
configuration->invertColor = false;
|
||||
configuration->backlightDutyFunction = ::setBacklightDuty;
|
||||
|
||||
return std::make_shared<Ili934xDisplay>(std::move(configuration));
|
||||
}
|
||||
|
||||
Reference in New Issue
Block a user