Rename Boards/ to Devices/ (#414)
This commit is contained in:
Ken Van Hoeylandt
committed by
GitHub
GitHub
parent
c7c9618f48
commit
c1ff024657
@@ -0,0 +1,7 @@
|
||||
file(GLOB_RECURSE SOURCE_FILES Source/*.c*)
|
||||
|
||||
idf_component_register(
|
||||
SRCS ${SOURCE_FILES}
|
||||
INCLUDE_DIRS "Source"
|
||||
REQUIRES Tactility esp_lvgl_port esp_lcd ST7789 PwmBacklight ButtonControl
|
||||
)
|
||||
@@ -0,0 +1,119 @@
|
||||
#include "devices/Display.h"
|
||||
|
||||
#include <Tactility/hal/Configuration.h>
|
||||
#include <Tactility/lvgl/LvglSync.h>
|
||||
#include <ButtonControl.h>
|
||||
#include <PwmBacklight.h>
|
||||
|
||||
using namespace tt::hal;
|
||||
|
||||
bool initBoot() {
|
||||
// CH552 applies 4 V to GPIO 0, which reduces Wi-Fi sensitivity
|
||||
// Setting output to high adds a bias of 3.3 V and suppresses over-voltage:
|
||||
gpio::configure(0, gpio::Mode::Output, false, false);
|
||||
gpio::setLevel(0, true);
|
||||
|
||||
// "Hold power" pin: must be set to high to keep the device powered on:
|
||||
gpio::configure(4, gpio::Mode::Output, false, false);
|
||||
gpio::setLevel(4, true);
|
||||
return driver::pwmbacklight::init(GPIO_NUM_27, 512);
|
||||
}
|
||||
|
||||
static DeviceVector createDevices() {
|
||||
return {
|
||||
ButtonControl::createTwoButtonControl(37, 39),
|
||||
createDisplay()
|
||||
};
|
||||
}
|
||||
|
||||
extern const Configuration hardwareConfiguration = {
|
||||
.initBoot = initBoot,
|
||||
.uiScale = UiScale::Smallest,
|
||||
.createDevices = createDevices,
|
||||
.i2c = {
|
||||
i2c::Configuration {
|
||||
.name = "Internal",
|
||||
.port = I2C_NUM_0,
|
||||
.initMode = i2c::InitMode::ByTactility,
|
||||
.isMutable = false,
|
||||
.config = (i2c_config_t) {
|
||||
.mode = I2C_MODE_MASTER,
|
||||
.sda_io_num = GPIO_NUM_21,
|
||||
.scl_io_num = GPIO_NUM_22,
|
||||
.sda_pullup_en = true,
|
||||
.scl_pullup_en = true,
|
||||
.master = {
|
||||
.clk_speed = 400000
|
||||
},
|
||||
.clk_flags = 0
|
||||
}
|
||||
},
|
||||
i2c::Configuration {
|
||||
.name = "Grove",
|
||||
.port = I2C_NUM_1,
|
||||
.initMode = i2c::InitMode::ByTactility,
|
||||
.isMutable = true,
|
||||
.config = (i2c_config_t) {
|
||||
.mode = I2C_MODE_MASTER,
|
||||
.sda_io_num = GPIO_NUM_32,
|
||||
.scl_io_num = GPIO_NUM_33,
|
||||
.sda_pullup_en = true,
|
||||
.scl_pullup_en = true,
|
||||
.master = {
|
||||
.clk_speed = 400000
|
||||
},
|
||||
.clk_flags = 0
|
||||
}
|
||||
}
|
||||
},
|
||||
.spi {
|
||||
spi::Configuration {
|
||||
.device = SPI2_HOST,
|
||||
.dma = SPI_DMA_CH_AUTO,
|
||||
.config = {
|
||||
.mosi_io_num = GPIO_NUM_15,
|
||||
.miso_io_num = GPIO_NUM_NC,
|
||||
.sclk_io_num = GPIO_NUM_13,
|
||||
.quadwp_io_num = GPIO_NUM_NC,
|
||||
.quadhd_io_num = GPIO_NUM_NC,
|
||||
.data4_io_num = GPIO_NUM_NC,
|
||||
.data5_io_num = GPIO_NUM_NC,
|
||||
.data6_io_num = GPIO_NUM_NC,
|
||||
.data7_io_num = GPIO_NUM_NC,
|
||||
.data_io_default_level = false,
|
||||
.max_transfer_sz = LCD_SPI_TRANSFER_SIZE_LIMIT,
|
||||
.flags = 0,
|
||||
.isr_cpu_id = ESP_INTR_CPU_AFFINITY_AUTO,
|
||||
.intr_flags = 0
|
||||
},
|
||||
.initMode = spi::InitMode::ByTactility,
|
||||
.isMutable = false,
|
||||
.lock = tt::lvgl::getSyncLock() // esp_lvgl_port owns the lock for the display
|
||||
}
|
||||
},
|
||||
.uart {
|
||||
uart::Configuration {
|
||||
.name = "Grove",
|
||||
.port = UART_NUM_1,
|
||||
.rxPin = GPIO_NUM_32,
|
||||
.txPin = GPIO_NUM_33,
|
||||
.rtsPin = GPIO_NUM_NC,
|
||||
.ctsPin = GPIO_NUM_NC,
|
||||
.rxBufferSize = 1024,
|
||||
.txBufferSize = 1024,
|
||||
.config = {
|
||||
.baud_rate = 115200,
|
||||
.data_bits = UART_DATA_8_BITS,
|
||||
.parity = UART_PARITY_DISABLE,
|
||||
.stop_bits = UART_STOP_BITS_1,
|
||||
.flow_ctrl = UART_HW_FLOWCTRL_DISABLE,
|
||||
.rx_flow_ctrl_thresh = 0,
|
||||
.source_clk = UART_SCLK_DEFAULT,
|
||||
.flags = {
|
||||
.allow_pd = 0,
|
||||
.backup_before_sleep = 0,
|
||||
}
|
||||
}
|
||||
},
|
||||
}
|
||||
};
|
||||
@@ -0,0 +1,32 @@
|
||||
#include "Display.h"
|
||||
|
||||
#include <PwmBacklight.h>
|
||||
#include <St7789Display.h>
|
||||
|
||||
std::shared_ptr<tt::hal::display::DisplayDevice> createDisplay() {
|
||||
St7789Display::Configuration panel_configuration = {
|
||||
.horizontalResolution = LCD_HORIZONTAL_RESOLUTION,
|
||||
.verticalResolution = LCD_VERTICAL_RESOLUTION,
|
||||
.gapX = 52,
|
||||
.gapY = 40,
|
||||
.swapXY = false,
|
||||
.mirrorX = false,
|
||||
.mirrorY = false,
|
||||
.invertColor = true,
|
||||
.bufferSize = LCD_BUFFER_SIZE,
|
||||
.touch = nullptr,
|
||||
.backlightDutyFunction = driver::pwmbacklight::setBacklightDuty,
|
||||
.resetPin = LCD_PIN_RESET,
|
||||
.lvglSwapBytes = false
|
||||
};
|
||||
|
||||
auto spi_configuration = std::make_shared<St7789Display::SpiConfiguration>(St7789Display::SpiConfiguration {
|
||||
.spiHostDevice = LCD_SPI_HOST,
|
||||
.csPin = LCD_PIN_CS,
|
||||
.dcPin = LCD_PIN_DC,
|
||||
.pixelClockFrequency = 40'000'000,
|
||||
.transactionQueueDepth = 10
|
||||
});
|
||||
|
||||
return std::make_shared<St7789Display>(panel_configuration, spi_configuration);
|
||||
}
|
||||
@@ -0,0 +1,18 @@
|
||||
#pragma once
|
||||
|
||||
#include "Tactility/hal/display/DisplayDevice.h"
|
||||
#include <memory>
|
||||
#include <driver/gpio.h>
|
||||
#include <driver/spi_common.h>
|
||||
|
||||
constexpr auto LCD_SPI_HOST = SPI2_HOST;
|
||||
constexpr auto LCD_PIN_CS = GPIO_NUM_5;
|
||||
constexpr auto LCD_PIN_DC = GPIO_NUM_14;
|
||||
constexpr auto LCD_PIN_RESET = GPIO_NUM_12;
|
||||
constexpr auto LCD_HORIZONTAL_RESOLUTION = 135;
|
||||
constexpr auto LCD_VERTICAL_RESOLUTION = 240;
|
||||
constexpr auto LCD_BUFFER_HEIGHT = LCD_VERTICAL_RESOLUTION / 3;
|
||||
constexpr auto LCD_BUFFER_SIZE = LCD_HORIZONTAL_RESOLUTION * LCD_BUFFER_HEIGHT;
|
||||
constexpr auto LCD_SPI_TRANSFER_SIZE_LIMIT = LCD_BUFFER_SIZE * LV_COLOR_DEPTH / 8;
|
||||
|
||||
std::shared_ptr<tt::hal::display::DisplayDevice> createDisplay();
|
||||
@@ -0,0 +1,20 @@
|
||||
[general]
|
||||
vendor=M5Stack
|
||||
name=StickC Plus2
|
||||
incubating=true
|
||||
|
||||
[hardware]
|
||||
target=ESP32
|
||||
flashSize=8MB
|
||||
spiRam=true
|
||||
spiRamMode=QUAD
|
||||
spiRamSpeed=80M
|
||||
esptoolFlashFreq=80M
|
||||
|
||||
[display]
|
||||
size=1.14"
|
||||
shape=rectangle
|
||||
dpi=242
|
||||
|
||||
[lvgl]
|
||||
colorDepth=16
|
||||
Reference in New Issue
Block a user