Rename Boards/ to Devices/ (#414)

2025-11-13 23:50:43 +01:00
parent c7c9618f48
commit c1ff024657
314 changed files with 105 additions and 99 deletions
@@ -0,0 +1,117 @@
+#include "devices/Display.h"
+#include "devices/Power.h"
+
+#include <Tactility/hal/Configuration.h>
+#include <Tactility/lvgl/LvglSync.h>
+#include <ButtonControl.h>
+
+using namespace tt::hal;
+
+bool initBoot() {
+    // CH552 applies 4 V to GPIO 0, which reduces Wi-Fi sensitivity
+    // Setting output to high adds a bias of 3.3 V and suppresses over-voltage:
+    gpio::configure(0, gpio::Mode::Output, false, false);
+    gpio::setLevel(0, true);
+
+    return initAxp();
+}
+
+static DeviceVector createDevices() {
+    return {
+        getAxp192(),
+        ButtonControl::createTwoButtonControl(37, 39),
+        createDisplay()
+    };
+}
+
+extern const Configuration hardwareConfiguration = {
+    .initBoot = initBoot,
+    .uiScale = UiScale::Smallest,
+    .createDevices = createDevices,
+    .i2c = {
+        i2c::Configuration {
+            .name = "Internal",
+            .port = I2C_NUM_0,
+            .initMode = i2c::InitMode::ByTactility,
+            .isMutable = false,
+            .config = (i2c_config_t) {
+                .mode = I2C_MODE_MASTER,
+                .sda_io_num = GPIO_NUM_21,
+                .scl_io_num = GPIO_NUM_22,
+                .sda_pullup_en = true,
+                .scl_pullup_en = true,
+                .master = {
+                    .clk_speed = 400000
+                },
+                .clk_flags = 0
+            }
+        },
+        i2c::Configuration {
+            .name = "Grove",
+            .port = I2C_NUM_1,
+            .initMode = i2c::InitMode::ByTactility,
+            .isMutable = true,
+            .config = (i2c_config_t) {
+                .mode = I2C_MODE_MASTER,
+                .sda_io_num = GPIO_NUM_32,
+                .scl_io_num = GPIO_NUM_33,
+                .sda_pullup_en = true,
+                .scl_pullup_en = true,
+                .master = {
+                    .clk_speed = 400000
+                },
+                .clk_flags = 0
+            }
+        }
+    },
+    .spi {
+        spi::Configuration {
+            .device = SPI2_HOST,
+            .dma = SPI_DMA_CH_AUTO,
+            .config = {
+                .mosi_io_num = GPIO_NUM_15,
+                .miso_io_num = GPIO_NUM_NC,
+                .sclk_io_num = GPIO_NUM_13,
+                .quadwp_io_num = GPIO_NUM_NC,
+                .quadhd_io_num = GPIO_NUM_NC,
+                .data4_io_num = GPIO_NUM_NC,
+                .data5_io_num = GPIO_NUM_NC,
+                .data6_io_num = GPIO_NUM_NC,
+                .data7_io_num = GPIO_NUM_NC,
+                .data_io_default_level = false,
+                .max_transfer_sz = LCD_SPI_TRANSFER_SIZE_LIMIT,
+                .flags = 0,
+                .isr_cpu_id = ESP_INTR_CPU_AFFINITY_AUTO,
+                .intr_flags = 0
+            },
+            .initMode = spi::InitMode::ByTactility,
+            .isMutable = false,
+            .lock = tt::lvgl::getSyncLock() // esp_lvgl_port owns the lock for the display
+        }
+    },
+    .uart {
+        uart::Configuration {
+            .name = "Grove",
+            .port = UART_NUM_1,
+            .rxPin = GPIO_NUM_32,
+            .txPin = GPIO_NUM_33,
+            .rtsPin = GPIO_NUM_NC,
+            .ctsPin = GPIO_NUM_NC,
+            .rxBufferSize = 1024,
+            .txBufferSize = 1024,
+            .config = {
+                .baud_rate = 115200,
+                .data_bits = UART_DATA_8_BITS,
+                .parity    = UART_PARITY_DISABLE,
+                .stop_bits = UART_STOP_BITS_1,
+                .flow_ctrl = UART_HW_FLOWCTRL_DISABLE,
+                .rx_flow_ctrl_thresh = 0,
+                .source_clk = UART_SCLK_DEFAULT,
+                .flags = {
+                    .allow_pd = 0,
+                    .backup_before_sleep = 0,
+                }
+            }
+        },
+    }
+};