Rename Boards/ to Devices/ (#414)

2025-11-13 23:50:43 +01:00
parent c7c9618f48
commit c1ff024657
314 changed files with 105 additions and 99 deletions
@@ -0,0 +1,71 @@
+#include "devices/Display.h"
+#include "devices/Power.h"
+#include "devices/Constants.h"
+
+#include <Tactility/hal/Configuration.h>
+#include <Tactility/lvgl/LvglSync.h>
+#include <ButtonControl.h>
+
+#include "driver/gpio.h"
+#include "driver/i2c.h"
+#include <Tactility/Log.h>
+#include "freertos/FreeRTOS.h"
+#include "freertos/task.h"
+
+static void enableOledPower() {
+    gpio_config_t io_conf = {
+        .pin_bit_mask = (1ULL << DISPLAY_PIN_POWER),
+        .mode = GPIO_MODE_OUTPUT,
+        .pull_up_en = GPIO_PULLUP_DISABLE, // The board has an external pull-up
+        .pull_down_en = GPIO_PULLDOWN_DISABLE,
+        .intr_type = GPIO_INTR_DISABLE,
+    };
+    gpio_config(&io_conf);
+    gpio_set_level(DISPLAY_PIN_POWER, 0); // Active low
+
+    vTaskDelay(pdMS_TO_TICKS(500)); // Add a small delay for power to stabilize
+    TT_LOG_I("OLED_POWER", "OLED power enabled");
+}
+
+static bool initBoot() {
+    // Enable power to the OLED before doing anything else
+    enableOledPower();
+
+    return true;
+}
+
+using namespace tt::hal;
+
+static std::vector<std::shared_ptr<Device>> createDevices() {
+    return {
+        createPower(),
+        ButtonControl::createOneButtonControl(0),
+        createDisplay()
+    };
+}
+
+extern const Configuration hardwareConfiguration = {
+    .initBoot = initBoot,
+    .uiScale = UiScale::Smallest,
+    .createDevices = createDevices,
+    .i2c = {
+        tt::hal::i2c::Configuration {
+            .name = "Internal",
+            .port = DISPLAY_I2C_PORT,
+            .initMode = tt::hal::i2c::InitMode::ByTactility,
+            .isMutable = true,
+            .config = (i2c_config_t) {
+                .mode = I2C_MODE_MASTER,
+                .sda_io_num = DISPLAY_PIN_SDA,
+                .scl_io_num = DISPLAY_PIN_SCL,
+                .sda_pullup_en = GPIO_PULLUP_ENABLE,
+                .scl_pullup_en = GPIO_PULLUP_ENABLE,
+                .master = {
+                    .clk_speed = DISPLAY_I2C_SPEED
+                },
+                .clk_flags = 0
+            }
+        }
+    },
+    .spi {},
+};