Rename Boards/ to Devices/ (#414)

2025-11-13 23:50:43 +01:00
parent c7c9618f48
commit c1ff024657
314 changed files with 105 additions and 99 deletions
@@ -0,0 +1,7 @@
+file(GLOB_RECURSE SOURCE_FILES Source/*.c*)
+
+idf_component_register(
+    SRCS ${SOURCE_FILES}
+    INCLUDE_DIRS "Source"
+    REQUIRES Tactility esp_lvgl_port RgbDisplay GT911 PwmBacklight driver
+)
@@ -0,0 +1,97 @@
+#include "devices/Display.h"
+#include "devices/SdCard.h"
+
+#include <Tactility/hal/Configuration.h>
+#include <PwmBacklight.h>
+
+using namespace tt::hal;
+
+static bool initBoot() {
+    // Note: I tried 100 Hz to 100 kHz and couldn't get the flickering to stop
+    return driver::pwmbacklight::init(GPIO_NUM_2);
+}
+
+static DeviceVector createDevices() {
+    return {
+        createDisplay(),
+        createSdCard(),
+    };
+}
+
+extern const Configuration hardwareConfiguration = {
+    .initBoot = initBoot,
+    .createDevices = createDevices,
+    .i2c = {
+        // There is only 1 (internal for touch, and also serves as "I2C-OUT" port)
+        // Note: You could repurpose 1 or more UART interfaces as I2C interfaces
+        i2c::Configuration {
+            .name = "Main",
+            .port = I2C_NUM_0,
+            .initMode = i2c::InitMode::ByTactility,
+            .isMutable = false,
+            .config = (i2c_config_t) {
+                .mode = I2C_MODE_MASTER,
+                .sda_io_num = GPIO_NUM_19,
+                .scl_io_num = GPIO_NUM_20,
+                .sda_pullup_en = true,
+                .scl_pullup_en = true,
+                .master = {
+                    .clk_speed = 400000
+                },
+                .clk_flags = 0
+            }
+        }
+    },
+    .spi {
+        // SD card
+        spi::Configuration {
+            .device = SPI2_HOST,
+            .dma = SPI_DMA_CH_AUTO,
+            .config = {
+                .mosi_io_num = GPIO_NUM_11,
+                .miso_io_num = GPIO_NUM_13,
+                .sclk_io_num = GPIO_NUM_12,
+                .quadwp_io_num = GPIO_NUM_NC,
+                .quadhd_io_num = GPIO_NUM_NC,
+                .data4_io_num = GPIO_NUM_NC,
+                .data5_io_num = GPIO_NUM_NC,
+                .data6_io_num = GPIO_NUM_NC,
+                .data7_io_num = GPIO_NUM_NC,
+                .data_io_default_level = false,
+                .max_transfer_sz = 8192,
+                .flags = 0,
+                .isr_cpu_id = ESP_INTR_CPU_AFFINITY_AUTO,
+                .intr_flags = 0
+            },
+            .initMode = spi::InitMode::ByTactility,
+            .isMutable = false,
+            .lock = nullptr
+        }
+    },
+    .uart {
+        // "UART1"
+        uart::Configuration {
+            .name = "UART1",
+            .port = UART_NUM_1,
+            .rxPin = GPIO_NUM_44,
+            .txPin = GPIO_NUM_43,
+            .rtsPin = GPIO_NUM_NC,
+            .ctsPin = GPIO_NUM_NC,
+            .rxBufferSize = 1024,
+            .txBufferSize = 1024,
+            .config = {
+                .baud_rate = 115200,
+                .data_bits = UART_DATA_8_BITS,
+                .parity    = UART_PARITY_DISABLE,
+                .stop_bits = UART_STOP_BITS_1,
+                .flow_ctrl = UART_HW_FLOWCTRL_DISABLE,
+                .rx_flow_ctrl_thresh = 0,
+                .source_clk = UART_SCLK_DEFAULT,
+                .flags = {
+                    .allow_pd = 0,
+                    .backup_before_sleep = 0,
+                }
+            }
+        }
+    }
+};
@@ -0,0 +1,106 @@
+#include "Display.h"
+
+#include <Gt911Touch.h>
+#include <PwmBacklight.h>
+#include <RgbDisplay.h>
+#include <Tactility/Log.h>
+
+std::shared_ptr<tt::hal::touch::TouchDevice> _Nullable createTouch() {
+    // Note for future changes: Reset pin is 38 and interrupt pin is 18
+    // or INT = NC, schematic and other info floating around is kinda conflicting...
+    auto configuration = std::make_unique<Gt911Touch::Configuration>(
+        I2C_NUM_0,
+        800,
+        480
+    );
+
+    return std::make_shared<Gt911Touch>(std::move(configuration));
+}
+
+std::shared_ptr<tt::hal::display::DisplayDevice> createDisplay() {
+    auto touch = createTouch();
+
+    constexpr uint32_t bufferPixels = 800 * 10;
+
+    esp_lcd_rgb_panel_config_t rgb_panel_config = {
+        .clk_src = LCD_CLK_SRC_DEFAULT,
+        .timings = {
+            .pclk_hz = 15000000,
+            .h_res = 800,
+            .v_res = 480,
+            .hsync_pulse_width = 4,
+            .hsync_back_porch = 43,
+            .hsync_front_porch = 8,
+            .vsync_pulse_width = 4,
+            .vsync_back_porch = 12,
+            .vsync_front_porch = 8,
+            .flags = {
+                .hsync_idle_low = false,
+                .vsync_idle_low = false,
+                .de_idle_high = false,
+                .pclk_active_neg = true,
+                .pclk_idle_high = false
+            }
+        },
+        .data_width = 16,
+        .bits_per_pixel = 0,
+        .num_fbs = 2,
+        .bounce_buffer_size_px = bufferPixels,
+        .sram_trans_align = 8,
+        .psram_trans_align = 64,
+        .hsync_gpio_num = GPIO_NUM_39,
+        .vsync_gpio_num = GPIO_NUM_41,
+        .de_gpio_num = GPIO_NUM_40 ,
+        .pclk_gpio_num = GPIO_NUM_0,
+        .disp_gpio_num = GPIO_NUM_NC,
+        .data_gpio_nums = {
+            GPIO_NUM_8, // B0
+            GPIO_NUM_3, // B1
+            GPIO_NUM_46, // B2
+            GPIO_NUM_9, // B3
+            GPIO_NUM_1, // B4
+            GPIO_NUM_5, // G0
+            GPIO_NUM_6, // G1
+            GPIO_NUM_7, // G2
+            GPIO_NUM_15, // G3
+            GPIO_NUM_16, // G4
+            GPIO_NUM_4, // G5
+            GPIO_NUM_45, // R0
+            GPIO_NUM_48, // R1
+            GPIO_NUM_47, // R2
+            GPIO_NUM_21, // R3
+            GPIO_NUM_14, // R4
+        },
+        .flags = {
+            .disp_active_low = false,
+            .refresh_on_demand = false,
+            .fb_in_psram = true,
+            .double_fb = true,
+            .no_fb = false,
+            .bb_invalidate_cache = false
+        }
+    };
+
+    RgbDisplay::BufferConfiguration buffer_config = {
+        .size = (800 * 480),
+        .useSpi = true,
+        .doubleBuffer = true,
+        .bounceBufferMode = true,
+        .avoidTearing = false
+    };
+
+    auto configuration = std::make_unique<RgbDisplay::Configuration>(
+        rgb_panel_config,
+        buffer_config,
+        touch,
+        LV_COLOR_FORMAT_RGB565,
+        false,
+        false,
+        false,
+        false,
+        driver::pwmbacklight::setBacklightDuty
+    );
+
+    auto display = std::make_shared<RgbDisplay>(std::move(configuration));
+    return std::reinterpret_pointer_cast<tt::hal::display::DisplayDevice>(display);
+}
@@ -0,0 +1,5 @@
+#pragma once
+
+#include <Tactility/hal/display/DisplayDevice.h>
+
+std::shared_ptr<tt::hal::display::DisplayDevice> createDisplay();
@@ -0,0 +1,19 @@
+#include "SdCard.h"
+
+#include <Tactility/hal/sdcard/SpiSdCardDevice.h>
+
+using tt::hal::sdcard::SpiSdCardDevice;
+
+std::shared_ptr<SdCardDevice> createSdCard() {
+    auto configuration = std::make_unique<SpiSdCardDevice::Config>(
+        GPIO_NUM_10,
+        GPIO_NUM_NC,
+        GPIO_NUM_NC,
+        GPIO_NUM_NC,
+        SdCardDevice::MountBehaviour::AtBoot
+    );
+
+    return std::make_shared<SpiSdCardDevice>(
+        std::move(configuration)
+    );
+}
@@ -0,0 +1,7 @@
+#pragma once
+
+#include <Tactility/hal/sdcard/SdCardDevice.h>
+
+using tt::hal::sdcard::SdCardDevice;
+
+std::shared_ptr<SdCardDevice> createSdCard();
@@ -0,0 +1,20 @@
+[general]
+vendor=Elecrow
+name=CrowPanel Basic 5.0"
+
+[hardware]
+target=ESP32S3
+flashSize=4MB
+spiRam=true
+spiRamMode=OCT
+spiRamSpeed=120M
+tinyUsb=true
+esptoolFlashFreq=120M
+
+[display]
+size=5.0"
+shape=rectangle
+dpi=187
+
+[lvgl]
+colorDepth=16