GPIO descriptor fixes (#578)

Drivers/st7123-module/source/st7123.cpp

@@ -225,7 +225,8 @@ static error_t start(Device* device) {
         .rgb_ele_order = config->bgr_order ? LCD_RGB_ELEMENT_ORDER_BGR : LCD_RGB_ELEMENT_ORDER_RGB,
         .data_endian = LCD_RGB_DATA_ENDIAN_LITTLE,
         .bits_per_pixel = config->bits_per_pixel,
-        .flags = { .reset_active_high = config->reset_active_high },
+        // ST7123's reset line is fixed active-low in hardware.
+        .flags = { .reset_active_high = false },
         .vendor_config = &vendor_config,
     };
 

Drivers/st7123-module/source/st7123_touch.cpp

@@ -75,9 +75,10 @@ static error_t start(Device* device) {
         .y_max = config->y_max,
         .rst_gpio_num = pin_or_nc(config->pin_reset),
         .int_gpio_num = pin_or_nc(config->pin_interrupt),
+        // ST7123's reset and interrupt lines are both fixed active-low in hardware.
         .levels = {
-            .reset = config->reset_active_high ? 1u : 0u,
-            .interrupt = config->interrupt_active_high ? 1u : 0u,
+            .reset = 0u,
+            .interrupt = 0u,
         },
         .flags = {
             .swap_xy = config->swap_xy ? 1u : 0u,