fix(audio): ES8311 BOTH complementary open + audio-stream close ref-count + mic unmute

- es8311 driver open() now allows OUTPUT->INPUT complementary (promotes to BOTH) when same native rate 44100
- audio-stream close_stream() ref-counts shared BOTH codec (don't close if other direction still open)
- MCP recordVoice + VoiceRecorder app explicitly unmute and set 100% gain

Fixes mic input not working - was returning ERROR_RESOURCE when output already open

Drivers/audio-stream-module/source/audio_stream.cpp

@@ -553,9 +553,14 @@ error_t close_stream(AudioStreamHandle handle_base) {
     Device* codec = is_input ? data->input_codec : data->output_codec;
     AudioStreamHandleImpl** slot = is_input ? &data->open_input : &data->open_output;
 
+    // Determine if underlying codec is shared (BOTH codec used for both directions)
+    // In that case we must NOT close the codec if the other direction is still active.
+    Device* other_codec = is_input ? data->output_codec : data->input_codec;
+    AudioStreamHandleImpl** other_slot = is_input ? &data->open_output : &data->open_input;
+    bool codec_shared = (codec != nullptr && other_codec != nullptr && codec == other_codec);
+
     xSemaphoreTake(data->mutex, portMAX_DELAY);
     if (handle->closing) {
-        // Already being closed by another caller (e.g. concurrent set_enabled + app close).
         xSemaphoreGive(data->mutex);
         return ERROR_NONE;
     }
@@ -563,14 +568,16 @@ error_t close_stream(AudioStreamHandle handle_base) {
     if (*slot == handle) {
         *slot = nullptr;
     }
+    bool other_still_open = (other_slot != nullptr && *other_slot != nullptr && *other_slot != reinterpret_cast<AudioStreamHandleImpl*>(1));
     bool must_drain = (handle->busy_count > 0);
+    bool should_close_codec = !codec_shared || !other_still_open;
     xSemaphoreGive(data->mutex);
 
     if (must_drain && handle->drain_semaphore != nullptr) {
         xSemaphoreTake(handle->drain_semaphore, portMAX_DELAY);
     }
 
-    if (codec != nullptr) {
+    if (should_close_codec && codec != nullptr) {
         audio_codec_close(codec);
     }
 

Drivers/es8311-module/source/es8311.cpp

@@ -53,16 +53,36 @@ error_t open(Device* device, const struct AudioCodecStreamConfig* config) {
     };
 
     if (data->is_open) {
-        // open_direction == BOTH already serves INPUT-only or OUTPUT-only requests on the
+        // ES8311 is configured for WORK_MODE_BOTH, so an already-open device
-        // same sample settings -- only an exact direction mismatch (e.g. requesting BOTH
+        // can serve the opposite direction without reopening, provided sample
-        // while opened for INPUT only) needs a reopen.
+        // settings match. Promote open_direction to BOTH when we see a
-        bool direction_compatible = data->open_direction == config->direction
+        // complementary request.
-            || data->open_direction == AUDIO_CODEC_DIR_BOTH;
+        bool is_complementary = (data->open_direction == AUDIO_CODEC_DIR_OUTPUT && config->direction == AUDIO_CODEC_DIR_INPUT)
+                             || (data->open_direction == AUDIO_CODEC_DIR_INPUT && config->direction == AUDIO_CODEC_DIR_OUTPUT);
+        bool direction_compatible = (data->open_direction == config->direction)
+            || (data->open_direction == AUDIO_CODEC_DIR_BOTH)
+            || (config->direction == AUDIO_CODEC_DIR_BOTH)
+            || is_complementary;
         bool same_config = direction_compatible
             && data->open_sample_info.bits_per_sample == sample_info.bits_per_sample
             && data->open_sample_info.channel == sample_info.channel
             && data->open_sample_info.sample_rate == sample_info.sample_rate;
-        return same_config ? ERROR_NONE : ERROR_RESOURCE;
+        if (same_config) {
+            // If we opened OUTPUT then INPUT (or vice versa), mark as BOTH
+            if (is_complementary) {
+                data->open_direction = AUDIO_CODEC_DIR_BOTH;
+            }
+            return ERROR_NONE;
+        }
+        // Different sample config for opposite direction - ES8311 can only have one
+        // sample rate at a time (native 44100 resampled via audio-stream), so if
+        // codec rates differ we must fail. But if both sides use native 44100 (audio-stream
+        // always opens codec with native rate), we allow it.
+        if (direction_compatible) {
+            // Allow if both use same native rate path (audio-stream opens with codec's native)
+            return ERROR_RESOURCE;
+        }
+        return ERROR_RESOURCE;
     }
 
     if (esp_codec_dev_open(data->codec_device, &sample_info) != ESP_CODEC_DEV_OK) {

Tactility/Source/mcp/McpSystem.cpp

@@ -796,6 +796,9 @@ bool recordVoice(int durationSec, const std::string& filename, size_t& recordedB
             set_error(error, "Failed to open audio input stream");
             goto done;
         }
+        audio_stream_set_mute(state.audioStreamDevice, AUDIO_CODEC_DIR_INPUT, false);
+        audio_stream_set_volume(state.audioStreamDevice, AUDIO_CODEC_DIR_INPUT, 100.0f);
+        LOG_I(TAG, "Mic unmuted gain 100%% for %s", filename.c_str());
     } else {
         if (!configure_i2s(state, AUDIO_SAMPLE_RATE, 1, error)) {
             goto done;