Driver improvements (#535)

- New drivers:
  - SD SPI
  - spi_peripheral
  - touch_placeholder
  - display_placeholder
- Devicetree compiler:
  - Implement phandle-arrays
  - Implement device addresses
- Add placeholder drivers to all devices with a SPI display
- SPI driver: add `cs-pins` and set them to high on driver start
- FileSystem: add `file_system_set_owner()` and `file_system_get_owner()`
- File locking is now checking if the related `FileSystem` is part of a shared SPI bus
- Add `device_get_child_count()`
- SDMMC driver: Remove default of `slot` value
- Fix for Crowpanel Basic 3.5" display (add delay to booting)
- Fix for LilyGO T-HMI SD card mounting (delayed mounting by disabling it initially in the dts)

Devices/m5stack-stickc-plus2/Source/Configuration.cpp

@@ -1,5 +1,4 @@
 #include "devices/Display.h"
-#include <driver/gpio.h>
 
 #include <Tactility/hal/Configuration.h>
 #include <ButtonControl.h>

Devices/m5stack-stickc-plus2/m5stack,stickc-plus2.dts

@@ -6,6 +6,7 @@
 #include <tactility/bindings/esp32_uart.h>
 #include <bindings/mpu6886.h>
 #include <bindings/bm8563.h>
+#include <tactility/bindings/display_placeholder.h>
 
 / {
 	compatible = "root";
@@ -45,8 +46,13 @@
 	spi0 {
 		compatible = "espressif,esp32-spi";
 		host = <SPI2_HOST>;
+		cs-gpios = <&gpio0 5 GPIO_FLAG_NONE>;
 		pin-mosi = <&gpio0 15 GPIO_FLAG_NONE>;
 		pin-sclk = <&gpio0 13 GPIO_FLAG_NONE>;
+	
+		display {
+			compatible = "display-placeholder";
+		};
 	};
 
 	uart_grove: uart1 {