Driver improvements (#535)

- New drivers:
  - SD SPI
  - spi_peripheral
  - touch_placeholder
  - display_placeholder
- Devicetree compiler:
  - Implement phandle-arrays
  - Implement device addresses
- Add placeholder drivers to all devices with a SPI display
- SPI driver: add `cs-pins` and set them to high on driver start
- FileSystem: add `file_system_set_owner()` and `file_system_get_owner()`
- File locking is now checking if the related `FileSystem` is part of a shared SPI bus
- Add `device_get_child_count()`
- SDMMC driver: Remove default of `slot` value
- Fix for Crowpanel Basic 3.5" display (add delay to booting)
- Fix for LilyGO T-HMI SD card mounting (delayed mounting by disabling it initially in the dts)

Devices/cyd-3248s035c/Source/Configuration.cpp

@@ -1,34 +1,32 @@
-#include "devices/Display.h"
-#include "devices/SdCard.h"
-#include <driver/gpio.h>
-
-#include <PwmBacklight.h>
-#include <Tactility/hal/Configuration.h>
-
-using namespace tt::hal;
-
-static bool initBoot() {
-    //Set the RGB Led Pins to output and turn them off
-    ESP_ERROR_CHECK(gpio_set_direction(GPIO_NUM_4, GPIO_MODE_OUTPUT)); //Red
-    ESP_ERROR_CHECK(gpio_set_direction(GPIO_NUM_16, GPIO_MODE_OUTPUT)); //Green
-    ESP_ERROR_CHECK(gpio_set_direction(GPIO_NUM_17, GPIO_MODE_OUTPUT)); //Blue
-
-    //0 on, 1 off... yep it's backwards.
-    ESP_ERROR_CHECK(gpio_set_level(GPIO_NUM_4, 1)); //Red
-    ESP_ERROR_CHECK(gpio_set_level(GPIO_NUM_16, 1)); //Green
-    ESP_ERROR_CHECK(gpio_set_level(GPIO_NUM_17, 1)); //Blue
-
-    return driver::pwmbacklight::init(LCD_PIN_BACKLIGHT);
-}
-
-static DeviceVector createDevices() {
-    return {
-        createDisplay(),
-        createSdCard()
-    };
-}
-
-extern const Configuration hardwareConfiguration = {
-    .initBoot = initBoot,
-    .createDevices = createDevices
-};
+#include "devices/Display.h"
+#include <driver/gpio.h>
+
+#include <PwmBacklight.h>
+#include <Tactility/hal/Configuration.h>
+
+using namespace tt::hal;
+
+static bool initBoot() {
+    //Set the RGB Led Pins to output and turn them off
+    ESP_ERROR_CHECK(gpio_set_direction(GPIO_NUM_4, GPIO_MODE_OUTPUT)); //Red
+    ESP_ERROR_CHECK(gpio_set_direction(GPIO_NUM_16, GPIO_MODE_OUTPUT)); //Green
+    ESP_ERROR_CHECK(gpio_set_direction(GPIO_NUM_17, GPIO_MODE_OUTPUT)); //Blue
+
+    //0 on, 1 off... yep it's backwards.
+    ESP_ERROR_CHECK(gpio_set_level(GPIO_NUM_4, 1)); //Red
+    ESP_ERROR_CHECK(gpio_set_level(GPIO_NUM_16, 1)); //Green
+    ESP_ERROR_CHECK(gpio_set_level(GPIO_NUM_17, 1)); //Blue
+
+    return driver::pwmbacklight::init(LCD_PIN_BACKLIGHT);
+}
+
+static DeviceVector createDevices() {
+    return {
+        createDisplay(),
+    };
+}
+
+extern const Configuration hardwareConfiguration = {
+    .initBoot = initBoot,
+    .createDevices = createDevices
+};

Devices/cyd-3248s035c/Source/devices/SdCard.cpp

@@ -1,31 +0,0 @@
-#include "SdCard.h"
-
-#include <tactility/device.h>
-#include <Tactility/hal/sdcard/SpiSdCardDevice.h>
-
-constexpr auto SDCARD_SPI_HOST = SPI3_HOST;
-constexpr auto SDCARD_PIN_CS = GPIO_NUM_5;
-
-using tt::hal::sdcard::SpiSdCardDevice;
-
-std::shared_ptr<SdCardDevice> createSdCard() {
-    auto configuration = std::make_unique<SpiSdCardDevice::Config>(
-        SDCARD_PIN_CS,
-        GPIO_NUM_NC,
-        GPIO_NUM_NC,
-        GPIO_NUM_NC,
-        SdCardDevice::MountBehaviour::AtBoot,
-        nullptr,
-        std::vector<gpio_num_t>(),
-        SDCARD_SPI_HOST
-    );
-
-    auto* spi_controller = device_find_by_name("spi1");
-    check(spi_controller, "spi1 not found");
-
-    return std::make_shared<SpiSdCardDevice>(
-        std::move(configuration),
-        spi_controller
-    );
-}
-

Devices/cyd-3248s035c/Source/devices/SdCard.h

@@ -1,8 +0,0 @@
-#pragma once
-
-#include <Tactility/hal/sdcard/SdCardDevice.h>
-
-using tt::hal::sdcard::SdCardDevice;
-
-std::shared_ptr<SdCardDevice> createSdCard();
-