feat(es3c28p,es3c35p): restore ES8311 42dB mic gain, font size, flash script

- Re-apply input-gain-percent (100 = no digital boost) + 42dB HW
  max mapping lost in the upstream merge (was 340953b1/7788415e)
- es3c35p: lvgl.fontSize=16 (text 12/16/22, launcher icons 42)
- Add flash-es3c.sh build+flash helper for 28p/35p

Devices/es3c28p/es3c28p.dts

@@ -90,6 +90,7 @@
 			compatible = "everest,es8311";
 			reg = <0x18>;
 			i2s = <&i2s0>;
+			input-gain-percent = <100>;
 		};
 	};
 

Devices/es3c35p/device.properties

@@ -16,6 +16,7 @@ display.shape=rectangle
 display.dpi=165
 
 lvgl.colorDepth=16
+lvgl.fontSize=16
 
 storage.userDataLocation=SD
 

Devices/es3c35p/es3c35p.dts

@@ -86,6 +86,7 @@
 			compatible = "everest,es8311";
 			reg = <0x18>;
 			i2s = <&i2s0>;
+			input-gain-percent = <100>;
 		};
 	};
 

Drivers/es8311-module/bindings/everest,es8311.yaml

@@ -9,3 +9,7 @@ properties:
     type: phandle
     required: true
     description: "I2S controller device that carries audio data"
+  input-gain-percent:
+    type: int
+    default: 100
+    description: "Extra digital gain multiplier applied by audio_stream on top of the ES8311's own 42dB hardware ADC gain, as an integer percentage (100 = 1.0x / no extra boost). For quiet MEMS mic capsules that are still quiet even at max hardware gain."

Drivers/es8311-module/include/drivers/es8311.h

@@ -25,6 +25,14 @@ struct Es8311Config {
     uint8_t address;
     /** I2S controller device that carries audio data */
     struct Device* i2s_device;
+    /**
+     * Extra fixed digital gain multiplier applied by audio_stream on top of the ES8311's
+     * own hardware ADC gain (0..42dB), as an integer percentage (100 = 1.0x / no extra boost).
+     * Small MEMS mic capsules can still sound quiet even near max hardware gain; this is for
+     * boards where 42dB hardware gain alone isn't enough. devicetree has no float property type,
+     * hence the x100 integer encoding.
+     */
+    uint16_t input_gain_percent;
 };
 
 #ifdef __cplusplus

Drivers/es8311-module/source/es8311.cpp

@@ -31,6 +31,7 @@ struct Es8311Data {
     bool is_open = false;
     AudioCodecDirection open_direction = AUDIO_CODEC_DIR_BOTH;
     esp_codec_dev_sample_info_t open_sample_info = {};
+    float input_gain = 1.0f;
 };
 
 #define GET_CONFIG(device) (static_cast<const Es8311Config*>((device)->config))
@@ -144,8 +145,8 @@ error_t set_volume(Device* device, AudioCodecDirection direction, float volume_p
     }
 
     if (direction == AUDIO_CODEC_DIR_INPUT) {
-        // ES8311 ADC gain range is roughly 0..24 dB; map 0..100% linearly onto it.
+        // ES8311 ADC gain supports 0..42dB (0,6,12,18,24,30,36,42) in 6dB steps
-        float db = (volume_percent / 100.0f) * 24.0f;
+        float db = (volume_percent / 100.0f) * 42.0f;
         return (esp_codec_dev_set_in_gain(data->codec_device, db) == ESP_CODEC_DEV_OK) ? ERROR_NONE : ERROR_RESOURCE;
     }
 
@@ -172,7 +173,8 @@ error_t get_volume(Device* device, AudioCodecDirection direction, float* volume_
         if (esp_codec_dev_get_in_gain(data->codec_device, &db) != ESP_CODEC_DEV_OK) {
             return ERROR_RESOURCE;
         }
-        *volume_percent = (db / 24.0f) * 100.0f;
+        *volume_percent = (db / 42.0f) * 100.0f;
+        if (*volume_percent > 100.0f) *volume_percent = 100.0f;
         return ERROR_NONE;
     }
 
@@ -235,6 +237,12 @@ error_t get_capabilities(Device* device, AudioCodecDirection* supported_directio
     return ERROR_NONE;
 }
 
+error_t get_input_gain_multiplier(Device* device, float* gain) {
+    auto* data = GET_DATA(device);
+    *gain = data->input_gain;
+    return ERROR_NONE;
+}
+
 static const struct AudioCodecApi API = {
     .open = open,
     .close = close,
@@ -247,7 +255,7 @@ static const struct AudioCodecApi API = {
     .get_native_sample_rate = get_native_sample_rate,
     .get_native_channels = get_native_channels,
     .get_capabilities = get_capabilities,
-    .get_input_gain_multiplier = nullptr,
+    .get_input_gain_multiplier = get_input_gain_multiplier,
 };
 
 // endregion
@@ -257,6 +265,11 @@ static const struct AudioCodecApi API = {
 error_t start_device(Device* device) {
     const auto* config = GET_CONFIG(device);
 
+    if (config->input_gain_percent > 2000) {
+        LOG_E(TAG, "Invalid input_gain_percent %u (must be 0..2000)", config->input_gain_percent);
+        return ERROR_RESOURCE;
+    }
+
     auto* i2c_controller = device_get_parent(device);
     if (i2c_controller == nullptr || device_get_type(i2c_controller) != &I2C_CONTROLLER_TYPE) {
         LOG_E(TAG, "Parent is not an I2C controller");
@@ -270,6 +283,8 @@ error_t start_device(Device* device) {
     }
 
     auto* data = new Es8311Data();
+    data->input_gain = (float) config->input_gain_percent / 100.0f;
+    if (config->input_gain_percent == 0) data->input_gain = 1.0f; // 0 means unset
 
     data->ctrl_if = audio_codec_adapter_new_i2c_ctrl(i2c_controller, config->address);
     data->data_if = audio_codec_adapter_new_i2s_data(i2s_controller);

flash-es3c.sh

@@ -0,0 +1,77 @@
+#!/bin/zsh
+# Build and flash LCDWIKI ES3C28P / ES3C35P firmware.
+#
+# Usage:
+#   ./flash-es3c.sh 35p [port] [--build-only]
+#   ./flash-es3c.sh 28p [port] [--build-only]
+#
+# If port is omitted, the single /dev/cu.usbmodem* device is used.
+# Each board keeps its own build dir (build-es3c28p / build-es3c35p),
+# so switching boards only rewrites sdkconfig via device.py.
+set -eu -o pipefail
+
+FIRMWARE_DIR="$(cd "$(dirname "$0")" && pwd)"
+cd "$FIRMWARE_DIR"
+SCRIPT_NAME="$(basename "$0")"
+
+usage() {
+    echo "Usage: ${SCRIPT_NAME} <28p|35p> [port] [--build-only]"
+    echo "  port defaults to the single /dev/cu.usbmodem* device"
+}
+
+if (( $# == 0 )); then
+    usage
+    exit 1
+fi
+
+case "$1" in
+    28p|es3c28p) DEVICE_ID="es3c28p" ;;
+    35p|es3c35p) DEVICE_ID="es3c35p" ;;
+    -h|--help|help) usage; exit 0 ;;
+    *) echo "Unknown device '$1' (expected 28p or 35p)"; usage; exit 1 ;;
+esac
+shift
+
+PORT=""
+BUILD_ONLY=0
+for arg in "$@"; do
+    case "$arg" in
+        --build-only) BUILD_ONLY=1 ;;
+        *) PORT="$arg" ;;
+    esac
+done
+
+if (( ! BUILD_ONLY )) && [[ -z "$PORT" ]]; then
+    candidates=(/dev/cu.usbmodem*(N))
+    if (( ${#candidates} == 0 )); then
+        echo "No /dev/cu.usbmodem* device found. Connect the board or pass the port explicitly."
+        exit 1
+    fi
+    if (( ${#candidates} > 1 )); then
+        echo "Multiple USB modem devices found:"
+        printf '  %s\n' "${candidates[@]}"
+        echo "Unplug one board or pass the port explicitly."
+        exit 1
+    fi
+    PORT="${candidates[1]}"
+fi
+
+# IDF 5.5 environment (host venvs corrupt IDF tooling, so pin the IDF python env)
+unset VIRTUAL_ENV PYTHONPATH PYTHONHOME
+export IDF_PYTHON_ENV_PATH=/Users/adolforeyna/.espressif/python_env/idf5.5_py3.9_env
+source /Users/adolforeyna/esp/esp-idf/export.sh
+
+BUILD_DIR="build-${DEVICE_ID}"
+"$IDF_PYTHON_ENV_PATH/bin/python" device.py "$DEVICE_ID"
+idf.py -B "$BUILD_DIR" reconfigure build
+
+if (( BUILD_ONLY )); then
+    echo "Build done (${BUILD_DIR}/Tactility.bin). Skipping flash (--build-only)."
+    exit 0
+fi
+
+echo "=== Confirming board on ${PORT} ==="
+"$IDF_PYTHON_ENV_PATH/bin/python" -m esptool --chip esp32s3 -p "$PORT" chip_id | grep -E "Chip is|MAC:"
+
+idf.py -B "$BUILD_DIR" -p "$PORT" -b 460800 flash
+echo "Flashed ${DEVICE_ID} on ${PORT}."