fix(rlcd): eliminate I2C CONFLICT + ES8311 probe + ST7305 reset race that froze screen

- DTS: migrate i2c0 from legacy esp32-i2c to esp32-i2c-master to avoid IDF CONFLICT warning (driver_ng vs old driver) which could stall boot
- Configuration.cpp: add 100ms power stabilize after GPIO46 amp on, probe ES8311 at 0x18 with has_device_at_address before full init (non-fatal), prevents bus lock if codec missing
- ST7305Display.cpp: add 150ms after reset + 50ms after init, prevents freeze on fast boot where SPI transaction too early (observed stuck on weird state)

Build 0x2b79c0 -> 0x2b79c0 with I2C master, ES8311 now initializes, display stable

Co-Authored-By: internal-model

Drivers/ST7305/Source/St7305Display.cpp

@@ -57,15 +57,18 @@ bool St7305Display::createPanelHandle(esp_lcd_panel_io_handle_t ioHandle, esp_lc
         return false;
     }
 
+    // ST7305 needs extra delay after reset before init — prevents freeze on fast boot
     if (esp_lcd_panel_reset(panelHandle) != ESP_OK) {
         LOGGER.error("Failed to reset st7305 panel");
         return false;
     }
+    vTaskDelay(pdMS_TO_TICKS(150));
 
     if (esp_lcd_panel_init(panelHandle) != ESP_OK) {
         LOGGER.error("Failed to init st7305 panel");
         return false;
     }
+    vTaskDelay(pdMS_TO_TICKS(50));
 
     return true;
 }