Add initial support for LilyGO T-HMI S3 with device configuration and… (#509)

Devices/lilygo-thmi-s3/Source/Configuration.cpp

@@ -0,0 +1,24 @@
+#include "devices/Power.h"
+#include "devices/SdCard.h"
+#include "devices/Display.h"
+
+#include <ButtonControl.h>
+#include <Tactility/hal/Configuration.h>
+
+bool initBoot();
+
+using namespace tt::hal;
+
+static std::vector<std::shared_ptr<tt::hal::Device>> createDevices() {
+    return {
+        createPower(),
+        createSdCard(),
+        createDisplay(),
+        ButtonControl::createOneButtonControl(0)
+    };
+}
+
+extern const Configuration hardwareConfiguration = {
+    .initBoot = initBoot,
+    .createDevices = createDevices
+};

Devices/lilygo-thmi-s3/Source/Init.cpp

@@ -0,0 +1,47 @@
+#include "devices/Power.h"
+#include "devices/Display.h"
+
+#include "PwmBacklight.h"
+#include "Tactility/kernel/SystemEvents.h"
+#include <Tactility/TactilityCore.h>
+
+#define TAG "thmi-s3"
+
+static bool powerOn() {
+    gpio_config_t power_signal_config = {
+        .pin_bit_mask =  (1ULL << THMI_S3_POWERON_GPIO) | (1ULL << THMI_S3_POWEREN_GPIO),
+        .mode = GPIO_MODE_OUTPUT,
+        .pull_up_en = GPIO_PULLUP_DISABLE,
+        .pull_down_en = GPIO_PULLDOWN_DISABLE,
+        .intr_type = GPIO_INTR_DISABLE,
+    };
+
+    if (gpio_config(&power_signal_config) != ESP_OK) {
+        return false;
+    }
+
+    if (gpio_set_level(THMI_S3_POWERON_GPIO, 1) != ESP_OK) {
+        return false;
+    }
+    
+    if (gpio_set_level(THMI_S3_POWEREN_GPIO, 1) != ESP_OK) {
+        return false;
+    }
+
+    return true;
+}
+
+bool initBoot() {
+    ESP_LOGI(TAG, "Powering on the board...");
+    if (!powerOn()) {
+        ESP_LOGE(TAG, "Failed to power on the board.");
+        return false;
+    }
+
+    if (!driver::pwmbacklight::init(DISPLAY_BL, 30000)) {
+        ESP_LOGE(TAG, "Failed to initialize backlight.");
+        return false;
+    }
+
+    return true;
+}

Devices/lilygo-thmi-s3/Source/devices/Display.cpp

@@ -0,0 +1,45 @@
+#include <Xpt2046SoftSpi.h>
+#include <Tactility/hal/touch/TouchDevice.h>
+
+#include "Display.h"
+#include "PwmBacklight.h"
+#include "St7789i8080Display.h"
+
+static bool touchSpiInitialized = false;
+
+static std::shared_ptr<tt::hal::touch::TouchDevice> createTouch() {
+    auto config = std::make_unique<Xpt2046SoftSpi::Configuration>(
+        TOUCH_MOSI_PIN,
+        TOUCH_MISO_PIN,
+        TOUCH_SCK_PIN,
+        TOUCH_CS_PIN,
+        DISPLAY_HORIZONTAL_RESOLUTION,
+        DISPLAY_VERTICAL_RESOLUTION
+    );
+
+    return std::make_shared<Xpt2046SoftSpi>(std::move(config));
+}
+
+std::shared_ptr<tt::hal::display::DisplayDevice> createDisplay() {
+    // Create configuration
+    auto config = St7789i8080Display::Configuration(
+        DISPLAY_CS,   // CS
+        DISPLAY_DC,   // DC
+        DISPLAY_WR,   // WR
+        DISPLAY_RD,   // RD
+        { DISPLAY_I80_D0, DISPLAY_I80_D1, DISPLAY_I80_D2, DISPLAY_I80_D3,
+          DISPLAY_I80_D4, DISPLAY_I80_D5, DISPLAY_I80_D6, DISPLAY_I80_D7 }, // D0..D7
+        DISPLAY_RST,   // RST
+        DISPLAY_BL   // BL
+    );
+    
+    // Set resolution explicitly
+    config.horizontalResolution = DISPLAY_HORIZONTAL_RESOLUTION;
+    config.verticalResolution = DISPLAY_VERTICAL_RESOLUTION;
+    config.backlightDutyFunction = driver::pwmbacklight::setBacklightDuty;
+    config.touch = createTouch();
+    config.invertColor = false;
+    
+    auto display = std::make_shared<St7789i8080Display>(config);
+    return display;
+}

Devices/lilygo-thmi-s3/Source/devices/Display.h

@@ -0,0 +1,35 @@
+#pragma once
+#include <driver/gpio.h>
+#include <Tactility/hal/display/DisplayDevice.h>
+
+#include "driver/spi_common.h"
+
+class St7789i8080Display;
+
+constexpr auto DISPLAY_CS = GPIO_NUM_6;
+constexpr auto DISPLAY_DC = GPIO_NUM_7;
+constexpr auto DISPLAY_WR = GPIO_NUM_8;
+constexpr auto DISPLAY_RD = GPIO_NUM_NC;
+constexpr auto DISPLAY_RST = GPIO_NUM_NC;
+constexpr auto DISPLAY_BL = GPIO_NUM_38;
+constexpr auto DISPLAY_I80_D0 = GPIO_NUM_48;
+constexpr auto DISPLAY_I80_D1 = GPIO_NUM_47;
+constexpr auto DISPLAY_I80_D2 = GPIO_NUM_39;
+constexpr auto DISPLAY_I80_D3 = GPIO_NUM_40;
+constexpr auto DISPLAY_I80_D4 = GPIO_NUM_41;
+constexpr auto DISPLAY_I80_D5 = GPIO_NUM_42;
+constexpr auto DISPLAY_I80_D6 = GPIO_NUM_45;
+constexpr auto DISPLAY_I80_D7 = GPIO_NUM_46;
+constexpr auto DISPLAY_HORIZONTAL_RESOLUTION = 240;
+constexpr auto DISPLAY_VERTICAL_RESOLUTION = 320;
+
+// Touch (XPT2046, resistive)
+constexpr auto TOUCH_SPI_HOST = SPI2_HOST;
+constexpr auto TOUCH_MISO_PIN = GPIO_NUM_4;
+constexpr auto TOUCH_MOSI_PIN = GPIO_NUM_3;
+constexpr auto TOUCH_SCK_PIN = GPIO_NUM_1;
+constexpr auto TOUCH_CS_PIN = GPIO_NUM_2;
+constexpr auto TOUCH_IRQ_PIN = GPIO_NUM_9;
+
+// Factory function for registration
+std::shared_ptr<tt::hal::display::DisplayDevice> createDisplay();

Devices/lilygo-thmi-s3/Source/devices/Power.cpp

@@ -0,0 +1,12 @@
+#include "Power.h"
+
+#include <ChargeFromAdcVoltage.h>
+#include <EstimatedPower.h>
+
+std::shared_ptr<tt::hal::power::PowerDevice> createPower() {
+    ChargeFromAdcVoltage::Configuration configuration;
+    // 2.0 ratio, but +.11 added as display voltage sag compensation.
+    configuration.adcMultiplier = 2.11;
+
+    return std::make_shared<EstimatedPower>(configuration);
+}

Devices/lilygo-thmi-s3/Source/devices/Power.h

@@ -0,0 +1,10 @@
+#pragma once
+
+#include <memory>
+#include <Tactility/hal/power/PowerDevice.h>
+#include <driver/gpio.h>
+
+constexpr auto THMI_S3_POWEREN_GPIO = GPIO_NUM_10;
+constexpr auto THMI_S3_POWERON_GPIO = GPIO_NUM_14;
+
+std::shared_ptr<tt::hal::power::PowerDevice> createPower();

Devices/lilygo-thmi-s3/Source/devices/SdCard.cpp

@@ -0,0 +1,23 @@
+#include "SdCard.h"
+
+#include <Tactility/lvgl/LvglSync.h>
+#include <Tactility/hal/sdcard/SdmmcDevice.h>
+
+using tt::hal::sdcard::SdmmcDevice;
+
+std::shared_ptr<SdCardDevice> createSdCard() {
+    auto configuration = std::make_unique<SdmmcDevice::Config>(
+        SD_DIO_SCLK, //CLK
+        SD_DIO_CMD, //CMD
+        SD_DIO_DATA0, //D0
+        SD_DIO_NC, //D1
+        SD_DIO_NC, //D2
+        SD_DIO_NC, //D3
+        SdCardDevice::MountBehaviour::AtBoot,
+        SD_DIO_BUS_WIDTH
+    );
+
+    return std::make_shared<SdmmcDevice>(
+        std::move(configuration)
+    );
+}

Devices/lilygo-thmi-s3/Source/devices/SdCard.h

@@ -0,0 +1,15 @@
+#pragma once
+
+#include <driver/gpio.h>
+
+#include "Tactility/hal/sdcard/SdCardDevice.h"
+
+using tt::hal::sdcard::SdCardDevice;
+
+constexpr auto SD_DIO_CMD = GPIO_NUM_11;
+constexpr auto SD_DIO_SCLK = GPIO_NUM_12;
+constexpr auto SD_DIO_DATA0 = GPIO_NUM_13;
+constexpr auto SD_DIO_NC = GPIO_NUM_NC;
+constexpr auto SD_DIO_BUS_WIDTH = 1;
+
+std::shared_ptr<SdCardDevice> createSdCard();

Devices/lilygo-thmi-s3/Source/module.cpp

@@ -0,0 +1,23 @@
+#include <tactility/module.h>
+
+extern "C" {
+
+static error_t start() {
+    // Empty for now
+    return ERROR_NONE;
+}
+
+static error_t stop() {
+    // Empty for now
+    return ERROR_NONE;
+}
+
+struct Module lilygo_thmi_s3_module = {
+    .name = "lilygo-thmi-s3",
+    .start = start,
+    .stop = stop,
+    .symbols = nullptr,
+    .internal = nullptr
+};
+
+}