New board: Elecrow CrowPanel Avance 2.8" (#224)

- Added new board
- Extracted ST7789 driver and backlight PWM driver into separate subprojects
- Refactored T-Deck to use the shared driver modules
- Fix bug in WiFi service: searching for APs was broken

Drivers/ST7789/CMakeLists.txt

@@ -0,0 +1,5 @@
+idf_component_register(
+    SRC_DIRS "Source"
+    INCLUDE_DIRS "Source"
+    REQUIRES Tactility esp_lvgl_port esp_lcd driver
+)

Drivers/ST7789/README.md

@@ -0,0 +1,3 @@
+# ST7789
+
+A basic ESP32 LVGL driver for ST7789 displays.

Drivers/ST7789/Source/St7789Display.cpp

@@ -0,0 +1,180 @@
+#include "St7789Display.h"
+
+#include <Tactility/Log.h>
+
+#include <esp_lcd_panel_commands.h>
+#include <esp_lcd_panel_dev.h>
+#include <esp_lcd_panel_st7789.h>
+#include <esp_lvgl_port.h>
+
+#define TAG "st7789"
+
+bool St7789Display::start() {
+    TT_LOG_I(TAG, "Starting");
+
+    const esp_lcd_panel_io_spi_config_t panel_io_config = {
+        .cs_gpio_num = configuration->csPin,
+        .dc_gpio_num = configuration->dcPin,
+        .spi_mode = 0,
+        .pclk_hz = configuration->pixelClockFrequency,
+        .trans_queue_depth = configuration->transactionQueueDepth,
+        .on_color_trans_done = nullptr,
+        .user_ctx = nullptr,
+        .lcd_cmd_bits = 8,
+        .lcd_param_bits = 8,
+        .cs_ena_pretrans = 0,
+        .cs_ena_posttrans = 0,
+        .flags = {
+            .dc_high_on_cmd = 0,
+            .dc_low_on_data = 0,
+            .dc_low_on_param = 0,
+            .octal_mode = 0,
+            .quad_mode = 0,
+            .sio_mode = 1,
+            .lsb_first = 0,
+            .cs_high_active = 0
+        }
+    };
+
+    if (esp_lcd_new_panel_io_spi(configuration->spiBusHandle, &panel_io_config, &ioHandle) != ESP_OK) {
+        TT_LOG_E(TAG, "Failed to create panel");
+        return false;
+    }
+
+    const esp_lcd_panel_dev_config_t panel_config = {
+        .reset_gpio_num = configuration->resetPin,
+        .rgb_ele_order = LCD_RGB_ELEMENT_ORDER_RGB,
+        .data_endian = LCD_RGB_DATA_ENDIAN_LITTLE,
+        .bits_per_pixel = 16,
+        .flags = {
+            .reset_active_high = false
+        },
+        .vendor_config = nullptr
+    };
+
+    if (esp_lcd_new_panel_st7789(ioHandle, &panel_config, &panelHandle) != ESP_OK) {
+        TT_LOG_E(TAG, "Failed to create panel");
+        return false;
+    }
+
+    if (esp_lcd_panel_reset(panelHandle) != ESP_OK) {
+        TT_LOG_E(TAG, "Failed to reset panel");
+        return false;
+    }
+
+    if (esp_lcd_panel_init(panelHandle) != ESP_OK) {
+        TT_LOG_E(TAG, "Failed to init panel");
+        return false;
+    }
+
+    if (esp_lcd_panel_invert_color(panelHandle, true) != ESP_OK) {
+        TT_LOG_E(TAG, "Failed to set panel to invert");
+        return false;
+    }
+
+    if (esp_lcd_panel_swap_xy(panelHandle, true) != ESP_OK) {
+        TT_LOG_E(TAG, "Failed to swap XY ");
+        return false;
+    }
+
+    if (esp_lcd_panel_mirror(panelHandle, true, false) != ESP_OK) {
+        TT_LOG_E(TAG, "Failed to set panel to mirror");
+        return false;
+    }
+
+    if (esp_lcd_panel_disp_on_off(panelHandle, true) != ESP_OK) {
+        TT_LOG_E(TAG, "Failed to turn display on");
+        return false;
+    }
+    uint32_t buffer_size;
+    if (configuration->bufferSize == 0) {
+        buffer_size = configuration->horizontalResolution * configuration->verticalResolution / 10;
+    } else {
+        buffer_size = configuration->bufferSize;
+    }
+
+    const lvgl_port_display_cfg_t disp_cfg = {
+        .io_handle = ioHandle,
+        .panel_handle = panelHandle,
+        .control_handle = nullptr,
+        .buffer_size = buffer_size,
+        .double_buffer = false,
+        .trans_size = 0,
+        .hres = configuration->horizontalResolution,
+        .vres = configuration->verticalResolution,
+        .monochrome = false,
+        .rotation = {
+            .swap_xy = true,
+            .mirror_x = true,
+            .mirror_y = false,
+        },
+        .color_format = LV_COLOR_FORMAT_RGB565,
+        .flags = {
+            .buff_dma = true,
+            .buff_spiram = false,
+            .sw_rotate = false,
+            .swap_bytes = false,
+            .full_refresh = false,
+            .direct_mode = false
+        }
+    };
+
+    displayHandle = lvgl_port_add_disp(&disp_cfg);
+
+    TT_LOG_I(TAG, "Finished");
+    return displayHandle != nullptr;
+}
+
+bool St7789Display::stop() {
+    assert(displayHandle != nullptr);
+
+    lvgl_port_remove_disp(displayHandle);
+
+    if (esp_lcd_panel_del(panelHandle) != ESP_OK) {
+        return false;
+    }
+
+    if (esp_lcd_panel_io_del(ioHandle) != ESP_OK) {
+        return false;
+    }
+
+    displayHandle = nullptr;
+    return true;
+}
+
+/**
+ * Note:
+ * The datasheet implies this should work, but it doesn't:
+ * https://www.digikey.com/htmldatasheets/production/1640716/0/0/1/ILI9341-Datasheet.pdf
+ *
+ * This repo claims it only has 1 curve:
+ * https://github.com/brucemack/hello-ili9341
+ *
+ * I'm leaving it in as I'm not sure if it's just my hardware that's problematic.
+ */
+void St7789Display::setGammaCurve(uint8_t index) {
+    uint8_t gamma_curve;
+    switch (index) {
+        case 0:
+            gamma_curve = 0x01;
+            break;
+        case 1:
+            gamma_curve = 0x04;
+            break;
+        case 2:
+            gamma_curve = 0x02;
+            break;
+        case 3:
+            gamma_curve = 0x08;
+            break;
+        default:
+            return;
+    }
+    const uint8_t param[] = {
+        gamma_curve
+    };
+
+    if (esp_lcd_panel_io_tx_param(ioHandle , LCD_CMD_GAMSET, param, 1) != ESP_OK) {
+        TT_LOG_E(TAG, "Failed to set gamma");
+    }
+}

Drivers/ST7789/Source/St7789Display.h

@@ -0,0 +1,84 @@
+#pragma once
+
+#include "Tactility/hal/display/DisplayDevice.h"
+
+#include <driver/spi_common.h>
+#include <driver/gpio.h>
+#include <esp_lcd_panel_io.h>
+#include <esp_lcd_types.h>
+#include <functional>
+#include <lvgl.h>
+
+class St7789Display final : public tt::hal::display::DisplayDevice {
+
+public:
+
+    class Configuration {
+
+    public:
+
+        Configuration(
+            esp_lcd_spi_bus_handle_t spi_bus_handle,
+            gpio_num_t csPin,
+            gpio_num_t dcPin,
+            unsigned int horizontalResolution,
+            unsigned int verticalResolution,
+            std::shared_ptr<tt::hal::touch::TouchDevice> touch
+        ) : spiBusHandle(spi_bus_handle),
+            csPin(csPin),
+            dcPin(dcPin),
+            horizontalResolution(horizontalResolution),
+            verticalResolution(verticalResolution),
+            touch(std::move(touch))
+        {}
+
+        esp_lcd_spi_bus_handle_t spiBusHandle;
+        gpio_num_t csPin;
+        gpio_num_t dcPin;
+        gpio_num_t resetPin = GPIO_NUM_NC;
+        unsigned int pixelClockFrequency = 80'000'000; // Hertz
+        size_t transactionQueueDepth = 10;
+        unsigned int horizontalResolution;
+        unsigned int verticalResolution;
+        uint32_t bufferSize = 0; // Size in pixel count. 0 means default, which is 1/10 of the screen size
+        std::shared_ptr<tt::hal::touch::TouchDevice> touch;
+        std::function<void(uint8_t)> _Nullable backlightDutyFunction = nullptr;
+    };
+
+private:
+
+    std::unique_ptr<Configuration> configuration;
+    esp_lcd_panel_io_handle_t ioHandle = nullptr;
+    esp_lcd_panel_handle_t panelHandle = nullptr;
+    lv_display_t* displayHandle = nullptr;
+
+public:
+
+    explicit St7789Display(std::unique_ptr<Configuration> inConfiguration) : configuration(std::move(inConfiguration)) {
+        assert(configuration != nullptr);
+    }
+
+    std::string getName() const final { return "ST7789"; }
+    std::string getDescription() const final { return "ST7789 display"; }
+
+    bool start() final;
+
+    bool stop() final;
+
+    std::shared_ptr<tt::hal::touch::TouchDevice> _Nullable createTouch() final { return configuration->touch; }
+
+    void setBacklightDuty(uint8_t backlightDuty) final {
+        if (configuration->backlightDutyFunction != nullptr) {
+            configuration->backlightDutyFunction(backlightDuty);
+        }
+    }
+
+    bool supportsBacklightDuty() const final { return configuration->backlightDutyFunction != nullptr; }
+
+    void setGammaCurve(uint8_t index) final;
+    uint8_t getGammaCurveCount() const final { return 4; };
+
+    lv_display_t* _Nullable getLvglDisplay() const final { return displayHandle; }
+};
+
+std::shared_ptr<tt::hal::display::DisplayDevice> createDisplay();