single repo

CMakeLists.txt

@@ -40,6 +40,12 @@ if (TARGET tinyusb_host)
                 hello_usb.cpp
                 display.cpp
                 commands/echo.cpp
+                keyboard_input.cpp
+                command_processor.cpp
+                epaper_manager.cpp
+                wifi_manager.cpp
+                tcp_debug.cpp
+                keyboard_stdio.cpp
                 )
 
     add_subdirectory(pico-ssd1306 commands)
@@ -58,7 +64,7 @@ if (TARGET tinyusb_host)
     )
 
     # pull in common dependencies
-    target_link_libraries(hello_usb pico_stdlib pico_ssd1306 hardware_i2c Config ePaper GUI Fonts hardware_spi pico_multicore tinyusb_host tinyusb_board)
+    target_link_libraries(hello_usb pico_stdlib pico_ssd1306 hardware_i2c Config ePaper GUI Fonts hardware_spi pico_multicore pico_flash tinyusb_host tinyusb_board pico_cyw43_arch_lwip_threadsafe_background)
 
     # enable usb output, disable uart output
     pico_enable_stdio_usb(hello_usb 0)

DISPLAY_REFRESH.md

@@ -0,0 +1,84 @@
+# Display Refresh Mechanism
+
+This document explains the dual-core architecture used to handle USB keyboard input and e-Paper display updates efficiently on the Raspberry Pi Pico.
+
+## Architecture Overview
+
+The system utilizes both cores of the RP2040 to ensure that the slow refresh rate of the e-Paper display does not block or lag the USB keyboard input.
+
+### Core 0: Input Handling (Producer)
+
+*   **Role:** Handles USB Host tasks, processes keyboard reports, and manages the text buffer.
+*   **Behavior:**
+    1.  Receives key presses via TinyUSB callbacks.
+    2.  Updates the local text buffer (`g_entry_list`).
+    3.  Triggers a display update via `send_display_update()`.
+*   **Non-Blocking Transmission:**
+    *   When an update is needed, Core 0 allocates a `DisplayMessage` on the heap.
+    *   It attempts to push the message pointer to the Multicore FIFO.
+    *   **Critical Optimization:** It uses `multicore_fifo_wready()` to check if the FIFO has space.
+        *   **If Ready:** Pushes the message.
+        *   **If Full:** Immediately frees the message and skips the update. This ensures Core 0 never waits for Core 1, keeping typing responsive.
+
+### Core 1: Display Driver (Consumer)
+
+*   **Role:** Manages the e-Paper hardware and performs the actual drawing operations.
+*   **Behavior:**
+    1.  Initializes the e-Paper display.
+    2.  Waits for messages in the Multicore FIFO.
+*   **Smart Refresh (Accumulation):**
+    *   When Core 1 wakes up to process a message, it first checks if *more* messages have arrived while it was sleeping or busy.
+    *   **FIFO Draining:** It loops through the FIFO, popping and freeing all intermediate messages, keeping only the **latest** one.
+    *   This ensures that if the user types "Hello World" quickly, Core 1 might skip rendering "Hello " and jump straight to rendering "Hello World", preventing a queue of obsolete updates from slowing down the display.
+
+## Data Flow Diagram
+
+```mermaid
+sequenceDiagram
+    participant User
+    participant Core0 as Core 0 (USB/Input)
+    participant FIFO as Multicore FIFO
+    participant Core1 as Core 1 (Display)
+
+    User->>Core0: Types 'A'
+    Core0->>FIFO: Push Msg('A')
+    
+    User->>Core0: Types 'B'
+    Core0->>FIFO: Push Msg('AB')
+    
+    Note over Core1: Busy refreshing...
+    
+    User->>Core0: Types 'C'
+    alt FIFO is Full
+        Core0->>Core0: Drop Msg('ABC') (Free memory)
+    else FIFO has space
+        Core0->>FIFO: Push Msg('ABC')
+    end
+
+    Core1->>FIFO: Pop Msg('A')
+    Note over Core1: Checks FIFO for newer msgs
+    FIFO->>Core1: Msg('AB') exists
+    Core1->>Core1: Free Msg('A'), use Msg('AB')
+    
+    FIFO->>Core1: Msg('ABC') exists
+    Core1->>Core1: Free Msg('AB'), use Msg('ABC')
+    
+    Core1->>Display: Render('ABC')
+```
+
+## Key Functions
+
+*   **`send_display_update(const char *entry, bool finish_line)`**: 
+    *   Allocates memory.
+    *   Checks FIFO status.
+    *   Pushes or drops message.
+*   **`core1_display_init()`**: 
+    *   Main loop for Core 1.
+    *   Drains FIFO to find the latest message.
+    *   Calls e-Paper drawing functions.
+
+## Memory Management
+
+*   Messages are `malloc`'d by Core 0.
+*   Messages are `free`'d by Core 1 (after processing or dropping).
+*   If Core 0 drops a message because the FIFO is full, it `free`s it immediately.

Pico_ePaper_Code/.gitignore

@@ -0,0 +1 @@
+build/

Pico_ePaper_Code/LICENSE

@@ -0,0 +1,674 @@
+                    GNU GENERAL PUBLIC LICENSE
+                       Version 3, 29 June 2007
+
+ Copyright (C) 2007 Free Software Foundation, Inc. <https://fsf.org/>
+ Everyone is permitted to copy and distribute verbatim copies
+ of this license document, but changing it is not allowed.
+
+                            Preamble
+
+  The GNU General Public License is a free, copyleft license for
+software and other kinds of works.
+
+  The licenses for most software and other practical works are designed
+to take away your freedom to share and change the works.  By contrast,
+the GNU General Public License is intended to guarantee your freedom to
+share and change all versions of a program--to make sure it remains free
+software for all its users.  We, the Free Software Foundation, use the
+GNU General Public License for most of our software; it applies also to
+any other work released this way by its authors.  You can apply it to
+your programs, too.
+
+  When we speak of free software, we are referring to freedom, not
+price.  Our General Public Licenses are designed to make sure that you
+have the freedom to distribute copies of free software (and charge for
+them if you wish), that you receive source code or can get it if you
+want it, that you can change the software or use pieces of it in new
+free programs, and that you know you can do these things.
+
+  To protect your rights, we need to prevent others from denying you
+these rights or asking you to surrender the rights.  Therefore, you have
+certain responsibilities if you distribute copies of the software, or if
+you modify it: responsibilities to respect the freedom of others.
+
+  For example, if you distribute copies of such a program, whether
+gratis or for a fee, you must pass on to the recipients the same
+freedoms that you received.  You must make sure that they, too, receive
+or can get the source code.  And you must show them these terms so they
+know their rights.
+
+  Developers that use the GNU GPL protect your rights with two steps:
+(1) assert copyright on the software, and (2) offer you this License
+giving you legal permission to copy, distribute and/or modify it.
+
+  For the developers' and authors' protection, the GPL clearly explains
+that there is no warranty for this free software.  For both users' and
+authors' sake, the GPL requires that modified versions be marked as
+changed, so that their problems will not be attributed erroneously to
+authors of previous versions.
+
+  Some devices are designed to deny users access to install or run
+modified versions of the software inside them, although the manufacturer
+can do so.  This is fundamentally incompatible with the aim of
+protecting users' freedom to change the software.  The systematic
+pattern of such abuse occurs in the area of products for individuals to
+use, which is precisely where it is most unacceptable.  Therefore, we
+have designed this version of the GPL to prohibit the practice for those
+products.  If such problems arise substantially in other domains, we
+stand ready to extend this provision to those domains in future versions
+of the GPL, as needed to protect the freedom of users.
+
+  Finally, every program is threatened constantly by software patents.
+States should not allow patents to restrict development and use of
+software on general-purpose computers, but in those that do, we wish to
+avoid the special danger that patents applied to a free program could
+make it effectively proprietary.  To prevent this, the GPL assures that
+patents cannot be used to render the program non-free.
+
+  The precise terms and conditions for copying, distribution and
+modification follow.
+
+                       TERMS AND CONDITIONS
+
+  0. Definitions.
+
+  "This License" refers to version 3 of the GNU General Public License.
+
+  "Copyright" also means copyright-like laws that apply to other kinds of
+works, such as semiconductor masks.
+
+  "The Program" refers to any copyrightable work licensed under this
+License.  Each licensee is addressed as "you".  "Licensees" and
+"recipients" may be individuals or organizations.
+
+  To "modify" a work means to copy from or adapt all or part of the work
+in a fashion requiring copyright permission, other than the making of an
+exact copy.  The resulting work is called a "modified version" of the
+earlier work or a work "based on" the earlier work.
+
+  A "covered work" means either the unmodified Program or a work based
+on the Program.
+
+  To "propagate" a work means to do anything with it that, without
+permission, would make you directly or secondarily liable for
+infringement under applicable copyright law, except executing it on a
+computer or modifying a private copy.  Propagation includes copying,
+distribution (with or without modification), making available to the
+public, and in some countries other activities as well.
+
+  To "convey" a work means any kind of propagation that enables other
+parties to make or receive copies.  Mere interaction with a user through
+a computer network, with no transfer of a copy, is not conveying.
+
+  An interactive user interface displays "Appropriate Legal Notices"
+to the extent that it includes a convenient and prominently visible
+feature that (1) displays an appropriate copyright notice, and (2)
+tells the user that there is no warranty for the work (except to the
+extent that warranties are provided), that licensees may convey the
+work under this License, and how to view a copy of this License.  If
+the interface presents a list of user commands or options, such as a
+menu, a prominent item in the list meets this criterion.
+
+  1. Source Code.
+
+  The "source code" for a work means the preferred form of the work
+for making modifications to it.  "Object code" means any non-source
+form of a work.
+
+  A "Standard Interface" means an interface that either is an official
+standard defined by a recognized standards body, or, in the case of
+interfaces specified for a particular programming language, one that
+is widely used among developers working in that language.
+
+  The "System Libraries" of an executable work include anything, other
+than the work as a whole, that (a) is included in the normal form of
+packaging a Major Component, but which is not part of that Major
+Component, and (b) serves only to enable use of the work with that
+Major Component, or to implement a Standard Interface for which an
+implementation is available to the public in source code form.  A
+"Major Component", in this context, means a major essential component
+(kernel, window system, and so on) of the specific operating system
+(if any) on which the executable work runs, or a compiler used to
+produce the work, or an object code interpreter used to run it.
+
+  The "Corresponding Source" for a work in object code form means all
+the source code needed to generate, install, and (for an executable
+work) run the object code and to modify the work, including scripts to
+control those activities.  However, it does not include the work's
+System Libraries, or general-purpose tools or generally available free
+programs which are used unmodified in performing those activities but
+which are not part of the work.  For example, Corresponding Source
+includes interface definition files associated with source files for
+the work, and the source code for shared libraries and dynamically
+linked subprograms that the work is specifically designed to require,
+such as by intimate data communication or control flow between those
+subprograms and other parts of the work.
+
+  The Corresponding Source need not include anything that users
+can regenerate automatically from other parts of the Corresponding
+Source.
+
+  The Corresponding Source for a work in source code form is that
+same work.
+
+  2. Basic Permissions.
+
+  All rights granted under this License are granted for the term of
+copyright on the Program, and are irrevocable provided the stated
+conditions are met.  This License explicitly affirms your unlimited
+permission to run the unmodified Program.  The output from running a
+covered work is covered by this License only if the output, given its
+content, constitutes a covered work.  This License acknowledges your
+rights of fair use or other equivalent, as provided by copyright law.
+
+  You may make, run and propagate covered works that you do not
+convey, without conditions so long as your license otherwise remains
+in force.  You may convey covered works to others for the sole purpose
+of having them make modifications exclusively for you, or provide you
+with facilities for running those works, provided that you comply with
+the terms of this License in conveying all material for which you do
+not control copyright.  Those thus making or running the covered works
+for you must do so exclusively on your behalf, under your direction
+and control, on terms that prohibit them from making any copies of
+your copyrighted material outside their relationship with you.
+
+  Conveying under any other circumstances is permitted solely under
+the conditions stated below.  Sublicensing is not allowed; section 10
+makes it unnecessary.
+
+  3. Protecting Users' Legal Rights From Anti-Circumvention Law.
+
+  No covered work shall be deemed part of an effective technological
+measure under any applicable law fulfilling obligations under article
+11 of the WIPO copyright treaty adopted on 20 December 1996, or
+similar laws prohibiting or restricting circumvention of such
+measures.
+
+  When you convey a covered work, you waive any legal power to forbid
+circumvention of technological measures to the extent such circumvention
+is effected by exercising rights under this License with respect to
+the covered work, and you disclaim any intention to limit operation or
+modification of the work as a means of enforcing, against the work's
+users, your or third parties' legal rights to forbid circumvention of
+technological measures.
+
+  4. Conveying Verbatim Copies.
+
+  You may convey verbatim copies of the Program's source code as you
+receive it, in any medium, provided that you conspicuously and
+appropriately publish on each copy an appropriate copyright notice;
+keep intact all notices stating that this License and any
+non-permissive terms added in accord with section 7 apply to the code;
+keep intact all notices of the absence of any warranty; and give all
+recipients a copy of this License along with the Program.
+
+  You may charge any price or no price for each copy that you convey,
+and you may offer support or warranty protection for a fee.
+
+  5. Conveying Modified Source Versions.
+
+  You may convey a work based on the Program, or the modifications to
+produce it from the Program, in the form of source code under the
+terms of section 4, provided that you also meet all of these conditions:
+
+    a) The work must carry prominent notices stating that you modified
+    it, and giving a relevant date.
+
+    b) The work must carry prominent notices stating that it is
+    released under this License and any conditions added under section
+    7.  This requirement modifies the requirement in section 4 to
+    "keep intact all notices".
+
+    c) You must license the entire work, as a whole, under this
+    License to anyone who comes into possession of a copy.  This
+    License will therefore apply, along with any applicable section 7
+    additional terms, to the whole of the work, and all its parts,
+    regardless of how they are packaged.  This License gives no
+    permission to license the work in any other way, but it does not
+    invalidate such permission if you have separately received it.
+
+    d) If the work has interactive user interfaces, each must display
+    Appropriate Legal Notices; however, if the Program has interactive
+    interfaces that do not display Appropriate Legal Notices, your
+    work need not make them do so.
+
+  A compilation of a covered work with other separate and independent
+works, which are not by their nature extensions of the covered work,
+and which are not combined with it such as to form a larger program,
+in or on a volume of a storage or distribution medium, is called an
+"aggregate" if the compilation and its resulting copyright are not
+used to limit the access or legal rights of the compilation's users
+beyond what the individual works permit.  Inclusion of a covered work
+in an aggregate does not cause this License to apply to the other
+parts of the aggregate.
+
+  6. Conveying Non-Source Forms.
+
+  You may convey a covered work in object code form under the terms
+of sections 4 and 5, provided that you also convey the
+machine-readable Corresponding Source under the terms of this License,
+in one of these ways:
+
+    a) Convey the object code in, or embodied in, a physical product
+    (including a physical distribution medium), accompanied by the
+    Corresponding Source fixed on a durable physical medium
+    customarily used for software interchange.
+
+    b) Convey the object code in, or embodied in, a physical product
+    (including a physical distribution medium), accompanied by a
+    written offer, valid for at least three years and valid for as
+    long as you offer spare parts or customer support for that product
+    model, to give anyone who possesses the object code either (1) a
+    copy of the Corresponding Source for all the software in the
+    product that is covered by this License, on a durable physical
+    medium customarily used for software interchange, for a price no
+    more than your reasonable cost of physically performing this
+    conveying of source, or (2) access to copy the
+    Corresponding Source from a network server at no charge.
+
+    c) Convey individual copies of the object code with a copy of the
+    written offer to provide the Corresponding Source.  This
+    alternative is allowed only occasionally and noncommercially, and
+    only if you received the object code with such an offer, in accord
+    with subsection 6b.
+
+    d) Convey the object code by offering access from a designated
+    place (gratis or for a charge), and offer equivalent access to the
+    Corresponding Source in the same way through the same place at no
+    further charge.  You need not require recipients to copy the
+    Corresponding Source along with the object code.  If the place to
+    copy the object code is a network server, the Corresponding Source
+    may be on a different server (operated by you or a third party)
+    that supports equivalent copying facilities, provided you maintain
+    clear directions next to the object code saying where to find the
+    Corresponding Source.  Regardless of what server hosts the
+    Corresponding Source, you remain obligated to ensure that it is
+    available for as long as needed to satisfy these requirements.
+
+    e) Convey the object code using peer-to-peer transmission, provided
+    you inform other peers where the object code and Corresponding
+    Source of the work are being offered to the general public at no
+    charge under subsection 6d.
+
+  A separable portion of the object code, whose source code is excluded
+from the Corresponding Source as a System Library, need not be
+included in conveying the object code work.
+
+  A "User Product" is either (1) a "consumer product", which means any
+tangible personal property which is normally used for personal, family,
+or household purposes, or (2) anything designed or sold for incorporation
+into a dwelling.  In determining whether a product is a consumer product,
+doubtful cases shall be resolved in favor of coverage.  For a particular
+product received by a particular user, "normally used" refers to a
+typical or common use of that class of product, regardless of the status
+of the particular user or of the way in which the particular user
+actually uses, or expects or is expected to use, the product.  A product
+is a consumer product regardless of whether the product has substantial
+commercial, industrial or non-consumer uses, unless such uses represent
+the only significant mode of use of the product.
+
+  "Installation Information" for a User Product means any methods,
+procedures, authorization keys, or other information required to install
+and execute modified versions of a covered work in that User Product from
+a modified version of its Corresponding Source.  The information must
+suffice to ensure that the continued functioning of the modified object
+code is in no case prevented or interfered with solely because
+modification has been made.
+
+  If you convey an object code work under this section in, or with, or
+specifically for use in, a User Product, and the conveying occurs as
+part of a transaction in which the right of possession and use of the
+User Product is transferred to the recipient in perpetuity or for a
+fixed term (regardless of how the transaction is characterized), the
+Corresponding Source conveyed under this section must be accompanied
+by the Installation Information.  But this requirement does not apply
+if neither you nor any third party retains the ability to install
+modified object code on the User Product (for example, the work has
+been installed in ROM).
+
+  The requirement to provide Installation Information does not include a
+requirement to continue to provide support service, warranty, or updates
+for a work that has been modified or installed by the recipient, or for
+the User Product in which it has been modified or installed.  Access to a
+network may be denied when the modification itself materially and
+adversely affects the operation of the network or violates the rules and
+protocols for communication across the network.
+
+  Corresponding Source conveyed, and Installation Information provided,
+in accord with this section must be in a format that is publicly
+documented (and with an implementation available to the public in
+source code form), and must require no special password or key for
+unpacking, reading or copying.
+
+  7. Additional Terms.
+
+  "Additional permissions" are terms that supplement the terms of this
+License by making exceptions from one or more of its conditions.
+Additional permissions that are applicable to the entire Program shall
+be treated as though they were included in this License, to the extent
+that they are valid under applicable law.  If additional permissions
+apply only to part of the Program, that part may be used separately
+under those permissions, but the entire Program remains governed by
+this License without regard to the additional permissions.
+
+  When you convey a copy of a covered work, you may at your option
+remove any additional permissions from that copy, or from any part of
+it.  (Additional permissions may be written to require their own
+removal in certain cases when you modify the work.)  You may place
+additional permissions on material, added by you to a covered work,
+for which you have or can give appropriate copyright permission.
+
+  Notwithstanding any other provision of this License, for material you
+add to a covered work, you may (if authorized by the copyright holders of
+that material) supplement the terms of this License with terms:
+
+    a) Disclaiming warranty or limiting liability differently from the
+    terms of sections 15 and 16 of this License; or
+
+    b) Requiring preservation of specified reasonable legal notices or
+    author attributions in that material or in the Appropriate Legal
+    Notices displayed by works containing it; or
+
+    c) Prohibiting misrepresentation of the origin of that material, or
+    requiring that modified versions of such material be marked in
+    reasonable ways as different from the original version; or
+
+    d) Limiting the use for publicity purposes of names of licensors or
+    authors of the material; or
+
+    e) Declining to grant rights under trademark law for use of some
+    trade names, trademarks, or service marks; or
+
+    f) Requiring indemnification of licensors and authors of that
+    material by anyone who conveys the material (or modified versions of
+    it) with contractual assumptions of liability to the recipient, for
+    any liability that these contractual assumptions directly impose on
+    those licensors and authors.
+
+  All other non-permissive additional terms are considered "further
+restrictions" within the meaning of section 10.  If the Program as you
+received it, or any part of it, contains a notice stating that it is
+governed by this License along with a term that is a further
+restriction, you may remove that term.  If a license document contains
+a further restriction but permits relicensing or conveying under this
+License, you may add to a covered work material governed by the terms
+of that license document, provided that the further restriction does
+not survive such relicensing or conveying.
+
+  If you add terms to a covered work in accord with this section, you
+must place, in the relevant source files, a statement of the
+additional terms that apply to those files, or a notice indicating
+where to find the applicable terms.
+
+  Additional terms, permissive or non-permissive, may be stated in the
+form of a separately written license, or stated as exceptions;
+the above requirements apply either way.
+
+  8. Termination.
+
+  You may not propagate or modify a covered work except as expressly
+provided under this License.  Any attempt otherwise to propagate or
+modify it is void, and will automatically terminate your rights under
+this License (including any patent licenses granted under the third
+paragraph of section 11).
+
+  However, if you cease all violation of this License, then your
+license from a particular copyright holder is reinstated (a)
+provisionally, unless and until the copyright holder explicitly and
+finally terminates your license, and (b) permanently, if the copyright
+holder fails to notify you of the violation by some reasonable means
+prior to 60 days after the cessation.
+
+  Moreover, your license from a particular copyright holder is
+reinstated permanently if the copyright holder notifies you of the
+violation by some reasonable means, this is the first time you have
+received notice of violation of this License (for any work) from that
+copyright holder, and you cure the violation prior to 30 days after
+your receipt of the notice.
+
+  Termination of your rights under this section does not terminate the
+licenses of parties who have received copies or rights from you under
+this License.  If your rights have been terminated and not permanently
+reinstated, you do not qualify to receive new licenses for the same
+material under section 10.
+
+  9. Acceptance Not Required for Having Copies.
+
+  You are not required to accept this License in order to receive or
+run a copy of the Program.  Ancillary propagation of a covered work
+occurring solely as a consequence of using peer-to-peer transmission
+to receive a copy likewise does not require acceptance.  However,
+nothing other than this License grants you permission to propagate or
+modify any covered work.  These actions infringe copyright if you do
+not accept this License.  Therefore, by modifying or propagating a
+covered work, you indicate your acceptance of this License to do so.
+
+  10. Automatic Licensing of Downstream Recipients.
+
+  Each time you convey a covered work, the recipient automatically
+receives a license from the original licensors, to run, modify and
+propagate that work, subject to this License.  You are not responsible
+for enforcing compliance by third parties with this License.
+
+  An "entity transaction" is a transaction transferring control of an
+organization, or substantially all assets of one, or subdividing an
+organization, or merging organizations.  If propagation of a covered
+work results from an entity transaction, each party to that
+transaction who receives a copy of the work also receives whatever
+licenses to the work the party's predecessor in interest had or could
+give under the previous paragraph, plus a right to possession of the
+Corresponding Source of the work from the predecessor in interest, if
+the predecessor has it or can get it with reasonable efforts.
+
+  You may not impose any further restrictions on the exercise of the
+rights granted or affirmed under this License.  For example, you may
+not impose a license fee, royalty, or other charge for exercise of
+rights granted under this License, and you may not initiate litigation
+(including a cross-claim or counterclaim in a lawsuit) alleging that
+any patent claim is infringed by making, using, selling, offering for
+sale, or importing the Program or any portion of it.
+
+  11. Patents.
+
+  A "contributor" is a copyright holder who authorizes use under this
+License of the Program or a work on which the Program is based.  The
+work thus licensed is called the contributor's "contributor version".
+
+  A contributor's "essential patent claims" are all patent claims
+owned or controlled by the contributor, whether already acquired or
+hereafter acquired, that would be infringed by some manner, permitted
+by this License, of making, using, or selling its contributor version,
+but do not include claims that would be infringed only as a
+consequence of further modification of the contributor version.  For
+purposes of this definition, "control" includes the right to grant
+patent sublicenses in a manner consistent with the requirements of
+this License.
+
+  Each contributor grants you a non-exclusive, worldwide, royalty-free
+patent license under the contributor's essential patent claims, to
+make, use, sell, offer for sale, import and otherwise run, modify and
+propagate the contents of its contributor version.
+
+  In the following three paragraphs, a "patent license" is any express
+agreement or commitment, however denominated, not to enforce a patent
+(such as an express permission to practice a patent or covenant not to
+sue for patent infringement).  To "grant" such a patent license to a
+party means to make such an agreement or commitment not to enforce a
+patent against the party.
+
+  If you convey a covered work, knowingly relying on a patent license,
+and the Corresponding Source of the work is not available for anyone
+to copy, free of charge and under the terms of this License, through a
+publicly available network server or other readily accessible means,
+then you must either (1) cause the Corresponding Source to be so
+available, or (2) arrange to deprive yourself of the benefit of the
+patent license for this particular work, or (3) arrange, in a manner
+consistent with the requirements of this License, to extend the patent
+license to downstream recipients.  "Knowingly relying" means you have
+actual knowledge that, but for the patent license, your conveying the
+covered work in a country, or your recipient's use of the covered work
+in a country, would infringe one or more identifiable patents in that
+country that you have reason to believe are valid.
+
+  If, pursuant to or in connection with a single transaction or
+arrangement, you convey, or propagate by procuring conveyance of, a
+covered work, and grant a patent license to some of the parties
+receiving the covered work authorizing them to use, propagate, modify
+or convey a specific copy of the covered work, then the patent license
+you grant is automatically extended to all recipients of the covered
+work and works based on it.
+
+  A patent license is "discriminatory" if it does not include within
+the scope of its coverage, prohibits the exercise of, or is
+conditioned on the non-exercise of one or more of the rights that are
+specifically granted under this License.  You may not convey a covered
+work if you are a party to an arrangement with a third party that is
+in the business of distributing software, under which you make payment
+to the third party based on the extent of your activity of conveying
+the work, and under which the third party grants, to any of the
+parties who would receive the covered work from you, a discriminatory
+patent license (a) in connection with copies of the covered work
+conveyed by you (or copies made from those copies), or (b) primarily
+for and in connection with specific products or compilations that
+contain the covered work, unless you entered into that arrangement,
+or that patent license was granted, prior to 28 March 2007.
+
+  Nothing in this License shall be construed as excluding or limiting
+any implied license or other defenses to infringement that may
+otherwise be available to you under applicable patent law.
+
+  12. No Surrender of Others' Freedom.
+
+  If conditions are imposed on you (whether by court order, agreement or
+otherwise) that contradict the conditions of this License, they do not
+excuse you from the conditions of this License.  If you cannot convey a
+covered work so as to satisfy simultaneously your obligations under this
+License and any other pertinent obligations, then as a consequence you may
+not convey it at all.  For example, if you agree to terms that obligate you
+to collect a royalty for further conveying from those to whom you convey
+the Program, the only way you could satisfy both those terms and this
+License would be to refrain entirely from conveying the Program.
+
+  13. Use with the GNU Affero General Public License.
+
+  Notwithstanding any other provision of this License, you have
+permission to link or combine any covered work with a work licensed
+under version 3 of the GNU Affero General Public License into a single
+combined work, and to convey the resulting work.  The terms of this
+License will continue to apply to the part which is the covered work,
+but the special requirements of the GNU Affero General Public License,
+section 13, concerning interaction through a network will apply to the
+combination as such.
+
+  14. Revised Versions of this License.
+
+  The Free Software Foundation may publish revised and/or new versions of
+the GNU General Public License from time to time.  Such new versions will
+be similar in spirit to the present version, but may differ in detail to
+address new problems or concerns.
+
+  Each version is given a distinguishing version number.  If the
+Program specifies that a certain numbered version of the GNU General
+Public License "or any later version" applies to it, you have the
+option of following the terms and conditions either of that numbered
+version or of any later version published by the Free Software
+Foundation.  If the Program does not specify a version number of the
+GNU General Public License, you may choose any version ever published
+by the Free Software Foundation.
+
+  If the Program specifies that a proxy can decide which future
+versions of the GNU General Public License can be used, that proxy's
+public statement of acceptance of a version permanently authorizes you
+to choose that version for the Program.
+
+  Later license versions may give you additional or different
+permissions.  However, no additional obligations are imposed on any
+author or copyright holder as a result of your choosing to follow a
+later version.
+
+  15. Disclaimer of Warranty.
+
+  THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED BY
+APPLICABLE LAW.  EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT
+HOLDERS AND/OR OTHER PARTIES PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY
+OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO,
+THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
+PURPOSE.  THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM
+IS WITH YOU.  SHOULD THE PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF
+ALL NECESSARY SERVICING, REPAIR OR CORRECTION.
+
+  16. Limitation of Liability.
+
+  IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING
+WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MODIFIES AND/OR CONVEYS
+THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY
+GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE
+USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED TO LOSS OF
+DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD
+PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS),
+EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF
+SUCH DAMAGES.
+
+  17. Interpretation of Sections 15 and 16.
+
+  If the disclaimer of warranty and limitation of liability provided
+above cannot be given local legal effect according to their terms,
+reviewing courts shall apply local law that most closely approximates
+an absolute waiver of all civil liability in connection with the
+Program, unless a warranty or assumption of liability accompanies a
+copy of the Program in return for a fee.
+
+                     END OF TERMS AND CONDITIONS
+
+            How to Apply These Terms to Your New Programs
+
+  If you develop a new program, and you want it to be of the greatest
+possible use to the public, the best way to achieve this is to make it
+free software which everyone can redistribute and change under these terms.
+
+  To do so, attach the following notices to the program.  It is safest
+to attach them to the start of each source file to most effectively
+state the exclusion of warranty; and each file should have at least
+the "copyright" line and a pointer to where the full notice is found.
+
+    <one line to give the program's name and a brief idea of what it does.>
+    Copyright (C) <year>  <name of author>
+
+    This program is free software: you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation, either version 3 of the License, or
+    (at your option) any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License
+    along with this program.  If not, see <https://www.gnu.org/licenses/>.
+
+Also add information on how to contact you by electronic and paper mail.
+
+  If the program does terminal interaction, make it output a short
+notice like this when it starts in an interactive mode:
+
+    <program>  Copyright (C) <year>  <name of author>
+    This program comes with ABSOLUTELY NO WARRANTY; for details type `show w'.
+    This is free software, and you are welcome to redistribute it
+    under certain conditions; type `show c' for details.
+
+The hypothetical commands `show w' and `show c' should show the appropriate
+parts of the General Public License.  Of course, your program's commands
+might be different; for a GUI interface, you would use an "about box".
+
+  You should also get your employer (if you work as a programmer) or school,
+if any, to sign a "copyright disclaimer" for the program, if necessary.
+For more information on this, and how to apply and follow the GNU GPL, see
+<https://www.gnu.org/licenses/>.
+
+  The GNU General Public License does not permit incorporating your program
+into proprietary programs.  If your program is a subroutine library, you
+may consider it more useful to permit linking proprietary applications with
+the library.  If this is what you want to do, use the GNU Lesser General
+Public License instead of this License.  But first, please read
+<https://www.gnu.org/licenses/why-not-lgpl.html>.

Pico_ePaper_Code/README.md

@@ -0,0 +1,15 @@
+# Pico_ePaper_Code
+## waveshare electronics
+![waveshare_logo.png](waveshare_logo.png)
+
+## 中文：
+微雪电子 Pico-ePaper 系列驱动代码，支持C和Python
+
+更多资料请在官网搜索相关产品：
+> https://www.waveshare.net or https://www.waveshare.net/wiki
+***
+## English:
+Waveshrae Pico-ePaper series drivers code, Support C and Python.
+
+For more information, please search on the official website:
+> https://www.waveshare.com or https://www.waveshare.com/wiki/Main_Page

Pico_ePaper_Code/Version_CN.txt

@@ -0,0 +1,16 @@
+2021-02-04：新创建，添加2.13 & 2.9程序
+2021-03-17：新添加2.13-B、2.13-C、2.9-B、2.9-C程序
+2021-05-12：新添加2.66程序，解决python程序自启动乱码的问题
+2021-05-14：新添加2.66-B、2.13-D、2.9-D程序
+2021-05-27：新添加5.83、5.83-B、7.5、7.5-B程序
+2021-06-01：新添加3.7程序
+2021-06-15：新添加2.7程序
+2021-07-13：新添加4.2、4.2-B、5.65程序
+2021-11-01：添加新程序2.13inch V3 e-Paper例程。
+2022-08-22：添加新程序2.13Binch V4 e-Paper例程。
+2023-03-16：添加新程序2.7inch V2 e-Paper例程。
+2023-08-12：添加新程序2.13inch V4 e-Paper例程。
+2023-08-31：更新 2.9inch V2 e-Paper 的例程，添加四灰度显示
+2023-09-13：添加新程序4.2inch V2 e-Paper例程。
+2024-04-22：添加新程序2.9inch e-Paper (B) V4 例程。
+2024-04-22：更新4.2inch e-Paper (B) V2 例程。

Pico_ePaper_Code/Version_EN.txt

@@ -0,0 +1,16 @@
+2021-02-04: newly built, add 2.13 & 2.9 programs.
+2021-03-17: add 2.13-B & 2.13-C & 2.9-B & 2.9-C programs.
+2021-05-12: add 2.66 program, Solve the Python program to start the problem of garbled code
+2021-05-14: add 2.66-B & 2.13-D & 2.9-D programs.
+2021-05-27：add 5.83 & 5.83-B & 7.5 & 7.5-B programs.
+2021-06-01：add 3.7 programs.
+2021-06-15：add 2.7 programs.
+2021-07-13：add 4.2 & 4.2-B & 5.65 programs.
+2021-11-01: Added new program 2.13inch V3 e-Paper routine.
+2022-08-22: Added new program 2.13Binch V4 e-Paper routine.
+2023-03-16: Added new program 2.7inch V2 e-Paper routine.
+2023-08-12: Added new program 2.13inch V4 e-Paper routine.
+2023-08-31: Update the routines of the 2.9inch V2 e-Paper to add a four-grayscale display
+2023-09-13: Added new program 4.2inch V2 e-Paper routine.
+2024-04-22: Added new program 2.9inch e-Paper (B) V4 routine added.
+2024-04-22: Update 4.2inch e-Paper (B) V2 routine.

Pico_ePaper_Code/c/CMakeLists.txt

@@ -0,0 +1,30 @@
+cmake_minimum_required(VERSION 3.12)
+include(pico_sdk_import.cmake)
+project(Pico_ePaper_Code)
+pico_sdk_init()
+
+# add a compilation subdirectory
+add_subdirectory(lib/Config)
+add_subdirectory(lib/e-Paper)
+add_subdirectory(lib/Fonts)
+add_subdirectory(lib/GUI)
+add_subdirectory(examples)
+
+# add a header directory
+include_directories(examples)
+include_directories(./lib/Config)
+include_directories(./lib/GUI)
+
+# generate an executable file
+add_executable(epd 
+main.c
+)
+
+# enable usb output, disable uart output
+pico_enable_stdio_usb(epd 1)
+pico_enable_stdio_uart(epd 0)
+
+# create map/bin/hex/uf2 file etc.
+pico_add_extra_outputs(epd)
+
+target_link_libraries(epd examples ePaper GUI Fonts Config pico_stdlib hardware_spi)

Pico_ePaper_Code/c/ReadmeCN.txt

@@ -0,0 +1,88 @@
+/*****************************************************************************
+* | File      	:   Readme_CN.txt
+* | Author      :   Waveshare team
+* | Function    :   Help with use
+* | Info        :
+*----------------
+* |	This version:   V1.0
+* | Date        :   2021-02-04
+* | Info        :   在这里提供一个中文版本的使用文档，以便你的快速使用
+******************************************************************************/
+这个文件是帮助您使用本例程。
+由于我们的墨水屏越来越多，不便于我们的维护，因此把所有的墨水屏程序做成一个工程。
+在这里简略的描述本工程的使用：
+
+1.基本信息：
+本例程使用相对应的模块搭配Pico进行了验证，你可以在工程的examples\中查看对应的测试例程;
+
+2.管脚连接：
+管脚连接你可以在\lib\Config目录下查看DEV_Config.c/h中查看，这里也再重述一次：
+EPD    =>    Pico
+VCC    ->    VSYS
+GND    ->    GND
+DIN    ->    11
+CLK    ->    10
+CS     ->    9
+DC     ->    8
+RST    ->    12
+BUSY   ->    13
+
+3.基本使用：
+由于本工程是一个综合工程，对于使用而言，你可能需要阅读以下内容：
+你可以在main.c中的12行到22行看到已经进行了注释的9个函数，
+请注意你购买的是哪一款的墨水屏。
+栗子1：
+    如果你购买的 Pico-ePaper-2.13，那么你应该把对应的18(或19，取决于您屏幕的版本)行代码的注释去掉，即：
+		// EPD_2in13_V2_test();
+    修改成：
+		EPD_2in13_V2_test();
+栗子2：
+    如果你购买的 Pico-ePaper-2.9-B，那么你应该把对应的21行代码的注释去掉，即：
+		// EPD_2in13b_V3_test();
+    修改成：
+		EPD_2in13b_V3_test();
+注意：对于屏幕的版本请注意你的屏幕背面是否贴有V2/V3等标识。
+
+然后你需要执行：
+	创建build目录：打开终端，在 Pico_ePaper_Code/c 目录下输入：
+		mkdir build
+	进入build目录，在终端输入：
+		cd build
+	执行cmake，自动生成Makefile文件，在终端输入：
+		cmake ..
+	执行make，生成可执行文件，在终端输入：
+		make -j4
+
+4.目录结构（选读）：
+如果你经常使用我们的产品，对我们的程序目录结构会十分熟悉，关于具体的函数的我们有一份
+函数的API手册，你可以在我们的WIKI上下载或像售后客服索取，这里简单介绍一次：
+\lib\Config\:此目录为硬件接口层文件，在DEV_Config.c(.h)可以看到很多定义，包括：
+    数据类型;
+    GPIO;
+    读写GPIO;
+    延时：注意：此延时函数并未使用示波器测量具体数值,因此会不准;
+    模块初始化与退出的处理：
+        void DEV_Module_Init(void);
+        void DEV_Module_Exit(void);
+        注意：1.这里是处理使用墨水屏前与使用完之后一些GPIO的处理。
+              2.对于PCB带有Rev2.1的，DEV_Module_Exit()之后整个模块会进入低功耗，经过测试这个功耗基本为0;
+              
+\lib\GUI\:此目录为一些基本的图像处理函数，在GUI_Paint.c(.h)中：
+    常用图像处理：创建图形、翻转图形、镜像图形、设置像素点、清屏等;
+    常用画图处理：画点、线、框、圆、中文字符、英文字符、数字等;
+    常用时间显示：提供一个常用的显示时间函数;
+    常用显示图片：提供一个显示位图的函数;
+    
+\lib\Fonts\:为一些常用的字体：
+    Ascii:
+        font8: 5*8 
+        font12: 7*12
+        font16: 11*16 
+        font20: 14*20 
+        font24: 17*24
+    中文：
+        font12CN: 16*21 
+        font24CN: 32*41
+        
+\lib\e-paper\:此目录下为墨水屏驱动函数;
+examples\:此目录下为墨水屏的测试程序，你可在其中看到具体的使用方法;

Pico_ePaper_Code/c/ReadmeEN.txt

@@ -0,0 +1,91 @@
+/*****************************************************************************
+* | File      	:   Readme_EN.txt
+* | Author      :   Waveshare team
+* | Function    :   Help with use
+* | Info        :
+*----------------
+* |	This version:   V1.0
+* | Date        :   2021-02-04
+* | Info        :   Here is an English version of the documentation for your quick use.
+******************************************************************************/
+This file is to help you use this routine.
+Since our ink screens are getting more and more, it is not convenient for our maintenance, so all the ink screen programs are made into one project.
+A brief description of the use of this project is here:
+
+1. Basic information:
+This routine is verified using the corresponding module with the PICO. 
+You can see the corresponding test routine in the examples\ of the project.
+
+2. Pin connection:
+Pin connection You can look at dev_config.c/h in \lib\Config. Again, here:
+EPD    =>    Pico
+VCC    ->    VSYS
+GND    ->    GND
+DIN    ->    11
+CLK    ->    10
+CS     ->    9
+DC     ->    8
+RST    ->    12
+BUSY   ->    13
+
+3. Basic use:
+As this project is a comprehensive project, for use, you may need to read the following:
+You can see the nine functions that have been commented in main.c on lines 12 through 22,
+Please pay attention to which type of ink screen you buy.
+eg.1：
+    If you purchased pico-epaper 2.13, 
+	then you should uncomment the corresponding 18(or 19, depending on the version of your screen) lines of code, i.e. :
+		// EPD_2in13_V2_test();
+    change to：
+		EPD_2in13_V2_test();
+eg.2：
+    If you bought pico-epaper 2.9-b, 
+	then you should uncomment the corresponding 21 lines of code, i.e. :
+		// EPD_2in13b_V3_test();
+    change to：
+		EPD_2in13b_V3_test();
+Note: For the version of the screen, please pay attention to whether the back of your screen is labeled with V2/V3 etc.
+
+Then you need to implement:
+	Create the build directory: Open the terminal and type in the Pico_ePaper_Code/c directory:
+		mkdir build
+	Go to the build directory and type:
+		cd build
+	Execute cmake to automatically generate the Makefile file and type:
+		cmake ..
+	To create an executable file, type:
+		make -j4
+
+4. Directory structure (selection):
+If you use our products frequently, we will be very familiar with our program directory structure. We have a copy of the specific function.
+The API manual for the function, you can download it on our WIKI or request it as an after-sales customer service. Here is a brief introduction:
+Config\: This directory is a hardware interface layer file. You can see many definitions in DEV_Config.c(.h), including:
+   type of data;
+    GPIO;
+    Read and write GPIO;
+    Delay: Note: This delay function does not use an oscilloscope to measure specific values.
+    Module Init and exit processing:
+        void DEV_Module_Init(void);
+        void DEV_Module_Exit(void);
+        Note: 1. Here is the processing of some GPIOs before and after using the ink screen.
+              2. For the PCB with Rev2.1, the entire module will enter low power consumption after DEV_Module_Exit(). After testing, the power consumption is basically 0;
+             
+\lib\GUI\: This directory is some basic image processing functions, in GUI_Paint.c(.h):
+    Common image processing: creating graphics, flipping graphics, mirroring graphics, setting pixels, clearing screens, etc.
+    Common drawing processing: drawing points, lines, boxes, circles, Chinese characters, English characters, numbers, etc.;
+    Common time display: Provide a common display time function;
+    Commonly used display pictures: provide a function to display bitmaps;
+    
+\lib\Fonts\: for some commonly used fonts:
+    Ascii:
+        Font8: 5*8
+        Font12: 7*12
+        Font16: 11*16
+        Font20: 14*20
+        Font24: 17*24
+    Chinese:
+        font12CN: 16*21
+        font24CN: 32*41
+        
+\lib\e-paper\: This screen is the ink screen driver function;
+examples\: This is the test program for the ink screen. You can see the specific usage method in it.

Pico_ePaper_Code/c/examples/CMakeLists.txt

@@ -0,0 +1,11 @@
+# Find all source files in a single current directory
+# Save the name to DIR_examples_SRCS
+aux_source_directory(. DIR_examples_SRCS)
+
+include_directories(../lib/Config)
+include_directories(../lib/GUI)
+include_directories(../lib/e-Paper)
+
+# Generate the link library
+add_library(examples ${DIR_examples_SRCS})
+target_link_libraries(examples PUBLIC Config)

Pico_ePaper_Code/c/examples/EPD_2in13_V2_test.c

@@ -0,0 +1,196 @@
+/*****************************************************************************
+* | File      	:   EPD_2IN13_V2_test.c
+* | Author      :   Waveshare team
+* | Function    :   2.13inch e-paper(V2) test demo
+* | Info        :
+*----------------
+* |	This version:   V1.0
+* | Date        :   2019-06-13
+* | Info        :
+#
+# Permission is hereby granted, free of charge, to any person obtaining a copy
+# of this software and associated documnetation files (the "Software"), to deal
+# in the Software without restriction, including without limitation the rights
+# to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+# copies of the Software, and to permit persons to  whom the Software is
+# furished to do so, subject to the following conditions:
+#
+# The above copyright notice and this permission notice shall be included in
+# all copies or substantial portions of the Software.
+#
+# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+# FITNESS OR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+# AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+# LIABILITY WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+# OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+# THE SOFTWARE.
+#
+******************************************************************************/
+#include "EPD_Test.h"
+#include "EPD_2in13_V2.h"
+
+int EPD_2in13_V2_test(void)
+{
+    printf("EPD_2IN13_V2_test Demo\r\n");
+    if(DEV_Module_Init()!=0){
+        return -1;
+    }
+
+    printf("e-Paper Init and Clear...\r\n");
+    EPD_2IN13_V2_Init(EPD_2IN13_V2_FULL);
+    EPD_2IN13_V2_Clear();
+    DEV_Delay_ms(500);
+
+    //Create a new image cache
+    UBYTE *BlackImage;
+    /* you have to edit the startup_stm32fxxx.s file and set a big enough heap size */
+    UWORD Imagesize = ((EPD_2IN13_V2_WIDTH % 8 == 0)? (EPD_2IN13_V2_WIDTH / 8 ): (EPD_2IN13_V2_WIDTH / 8 + 1)) * EPD_2IN13_V2_HEIGHT;
+    if((BlackImage = (UBYTE *)malloc(Imagesize)) == NULL) {
+        printf("Failed to apply for black memory...\r\n");
+        return -1;
+    }
+    printf("Paint_NewImage\r\n");
+    Paint_NewImage(BlackImage, EPD_2IN13_V2_WIDTH, EPD_2IN13_V2_HEIGHT, 270, WHITE);
+    Paint_SelectImage(BlackImage);
+    Paint_SetMirroring(MIRROR_HORIZONTAL); //
+    Paint_Clear(WHITE);
+
+#if 1   //show image for array    
+    printf("show image for array\r\n");
+    Paint_SelectImage(BlackImage);
+    Paint_Clear(WHITE);
+    Paint_DrawBitMap(gImage_2in13);
+
+    EPD_2IN13_V2_Display(BlackImage);
+    DEV_Delay_ms(2000);
+#endif
+
+#if 1   // Drawing on the image
+    printf("Drawing\r\n");
+    //1.Select Image
+    Paint_SelectImage(BlackImage);
+    Paint_Clear(WHITE);
+
+    // 2.Drawing on the image
+    Paint_DrawPoint(5, 10, BLACK, DOT_PIXEL_1X1, DOT_STYLE_DFT);
+    Paint_DrawPoint(5, 25, BLACK, DOT_PIXEL_2X2, DOT_STYLE_DFT);
+    Paint_DrawPoint(5, 40, BLACK, DOT_PIXEL_3X3, DOT_STYLE_DFT);
+    Paint_DrawPoint(5, 55, BLACK, DOT_PIXEL_4X4, DOT_STYLE_DFT);
+
+    Paint_DrawLine(20, 10, 70, 60, BLACK, DOT_PIXEL_1X1, LINE_STYLE_SOLID);
+    Paint_DrawLine(70, 10, 20, 60, BLACK, DOT_PIXEL_1X1, LINE_STYLE_SOLID);
+    Paint_DrawRectangle(20, 10, 70, 60, BLACK, DOT_PIXEL_1X1, DRAW_FILL_EMPTY);
+    Paint_DrawRectangle(85, 10, 135, 60, BLACK, DOT_PIXEL_1X1, DRAW_FILL_FULL);
+
+    Paint_DrawLine(45, 15, 45, 55, BLACK, DOT_PIXEL_1X1, LINE_STYLE_DOTTED);
+    Paint_DrawLine(25, 35, 70, 35, BLACK, DOT_PIXEL_1X1, LINE_STYLE_DOTTED);
+    Paint_DrawCircle(45, 35, 20, BLACK, DOT_PIXEL_1X1, DRAW_FILL_EMPTY);
+    Paint_DrawCircle(110, 35, 20, WHITE, DOT_PIXEL_1X1, DRAW_FILL_FULL);
+
+    Paint_DrawString_EN(140, 15, "waveshare", &Font16, BLACK, WHITE);
+    Paint_DrawNum(140, 40, 123456789, &Font16, BLACK, WHITE);
+
+    Paint_DrawString_CN(140, 60, "<EFBFBD><EFBFBD><EFBFBD><EFBFBD>abc", &Font12CN, BLACK, WHITE);
+    Paint_DrawString_CN(5, 65, "΢ѩ<EFBFBD><EFBFBD><EFBFBD><EFBFBD>", &Font24CN, WHITE, BLACK);
+
+    EPD_2IN13_V2_Display(BlackImage);
+    DEV_Delay_ms(2000);
+#endif
+
+#if 1   // Drawing on the image
+    printf("Drawing\r\n");
+    //1.Select Image
+    Paint_SelectImage(BlackImage);
+    Paint_Clear(WHITE);
+
+    // 2.Drawing on the image
+    Paint_DrawLine(1,	1,	250,1,		BLACK, DOT_PIXEL_1X1, LINE_STYLE_SOLID);
+    Paint_DrawLine(250, 1,	250,122,	BLACK, DOT_PIXEL_1X1, LINE_STYLE_SOLID);
+    Paint_DrawLine(250, 122,1,	122,	BLACK, DOT_PIXEL_1X1, LINE_STYLE_SOLID);
+    Paint_DrawLine(1, 	122,1,	1,		BLACK, DOT_PIXEL_1X1, LINE_STYLE_SOLID);
+
+    Paint_DrawLine(3,	3,	248,3,		BLACK, DOT_PIXEL_1X1, LINE_STYLE_SOLID);
+    Paint_DrawLine(248, 3,	248,120,	BLACK, DOT_PIXEL_1X1, LINE_STYLE_SOLID);
+    Paint_DrawLine(248, 120,3,	120,	BLACK, DOT_PIXEL_1X1, LINE_STYLE_SOLID);
+    Paint_DrawLine(3, 	120,3,	3,		BLACK, DOT_PIXEL_1X1, LINE_STYLE_SOLID);
+	
+    Paint_DrawLine(5,	5,	246,5,		BLACK, DOT_PIXEL_1X1, LINE_STYLE_SOLID);
+    Paint_DrawLine(246, 5,	246,118,	BLACK, DOT_PIXEL_1X1, LINE_STYLE_SOLID);
+    Paint_DrawLine(246, 118,5,	118,	BLACK, DOT_PIXEL_1X1, LINE_STYLE_SOLID);
+    Paint_DrawLine(5, 	118,5,	5,		BLACK, DOT_PIXEL_1X1, LINE_STYLE_SOLID);
+	
+    Paint_DrawLine(7,	7,	244,7,		BLACK, DOT_PIXEL_1X1, LINE_STYLE_SOLID);
+    Paint_DrawLine(244, 7,	244,116,	BLACK, DOT_PIXEL_1X1, LINE_STYLE_SOLID);
+    Paint_DrawLine(244, 116,7,	116,	BLACK, DOT_PIXEL_1X1, LINE_STYLE_SOLID);
+    Paint_DrawLine(7, 	116,7,	7,		BLACK, DOT_PIXEL_1X1, LINE_STYLE_SOLID);
+	
+    Paint_DrawLine(9,	9,	242,9,		BLACK, DOT_PIXEL_1X1, LINE_STYLE_SOLID);
+    Paint_DrawLine(242, 9,	242,114,	BLACK, DOT_PIXEL_1X1, LINE_STYLE_SOLID);
+    Paint_DrawLine(242, 114,9,	114,	BLACK, DOT_PIXEL_1X1, LINE_STYLE_SOLID);
+    Paint_DrawLine(9, 	114,9,	9,		BLACK, DOT_PIXEL_1X1, LINE_STYLE_SOLID);
+
+    Paint_DrawString_EN(60, 25, "waveshare", &Font16, BLACK, WHITE);
+    Paint_DrawString_CN(60, 55, "΢ѩ<EFBFBD><EFBFBD><EFBFBD><EFBFBD>", &Font24CN, WHITE, BLACK);
+
+    EPD_2IN13_V2_Display(BlackImage);
+    DEV_Delay_ms(2000);
+#endif
+
+#if 1   //Partial refresh, example shows time    		
+    printf("Partial refresh\r\n");
+    EPD_2IN13_V2_Init(EPD_2IN13_V2_FULL);
+    EPD_2IN13_V2_DisplayPartBaseImage(BlackImage);
+
+    EPD_2IN13_V2_Init(EPD_2IN13_V2_PART);
+    Paint_SelectImage(BlackImage);
+    PAINT_TIME sPaint_time;
+    sPaint_time.Hour = 12;
+    sPaint_time.Min = 34;
+    sPaint_time.Sec = 56;
+    UBYTE num = 20;
+    for (;;) {
+        sPaint_time.Sec = sPaint_time.Sec + 1;
+        if (sPaint_time.Sec == 60) {
+            sPaint_time.Min = sPaint_time.Min + 1;
+            sPaint_time.Sec = 0;
+            if (sPaint_time.Min == 60) {
+                sPaint_time.Hour =  sPaint_time.Hour + 1;
+                sPaint_time.Min = 0;
+                if (sPaint_time.Hour == 24) {
+                    sPaint_time.Hour = 0;
+                    sPaint_time.Min = 0;
+                    sPaint_time.Sec = 0;
+                }
+            }
+        }
+        Paint_ClearWindows(140, 90, 140 + Font20.Width * 7, 90 + Font20.Height, WHITE);
+        Paint_DrawTime(140, 90, &sPaint_time, &Font20, WHITE, BLACK);
+
+        num = num - 1;
+        if(num == 0) {
+            break;
+        }
+        EPD_2IN13_V2_DisplayPart(BlackImage);
+        DEV_Delay_ms(500);//Analog clock 1s
+    }
+
+#endif
+    printf("Clear...\r\n");
+
+    EPD_2IN13_V2_Init(EPD_2IN13_V2_FULL);
+    EPD_2IN13_V2_Clear();
+    DEV_Delay_ms(2000);//Analog clock 1s
+
+    printf("Goto Sleep...\r\n");
+    EPD_2IN13_V2_Sleep();
+    free(BlackImage);
+    BlackImage = NULL;
+    DEV_Delay_ms(2000);//important, at least 2s
+    // close 5V
+    printf("close 5V, Module enters 0 power consumption ...\r\n");
+    DEV_Module_Exit();
+    
+    return 0;
+}
+

Pico_ePaper_Code/c/examples/EPD_2in13_V3_test.c

@@ -0,0 +1,149 @@
+/*****************************************************************************
+* | File      	:   EPD_2in13_V3_test.c
+* | Author      :   Waveshare team
+* | Function    :   2.13inch e-paper V3 test demo
+* | Info        :
+*----------------
+* |	This version:   V1.0
+* | Date        :   2020-12-22
+* | Info        :
+#
+# Permission is hereby granted, free of charge, to any person obtaining a copy
+# of this software and associated documnetation files (the "Software"), to deal
+# in the Software without restriction, including without limitation the rights
+# to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+# copies of the Software, and to permit persons to  whom the Software is
+# furished to do so, subject to the following conditions:
+#
+# The above copyright notice and this permission notice shall be included in
+# all copies or substantial portions of the Software.
+#
+# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+# FITNESS OR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+# AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+# LIABILITY WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+# OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+# THE SOFTWARE.
+#
+******************************************************************************/
+#include "EPD_Test.h"
+#include "EPD_2in13_V3.h"
+
+int EPD_2in13_V3_test(void)
+{
+    printf("EPD_2in13_V3_test Demo\r\n");
+    if(DEV_Module_Init()!=0){
+        return -1;
+    }
+
+    printf("e-Paper Init and Clear...\r\n");
+	EPD_2in13_V3_Init();
+    EPD_2in13_V3_Clear();
+
+    //Create a new image cache
+    UBYTE *BlackImage;
+    UWORD Imagesize = ((EPD_2in13_V3_WIDTH % 8 == 0)? (EPD_2in13_V3_WIDTH / 8 ): (EPD_2in13_V3_WIDTH / 8 + 1)) * EPD_2in13_V3_HEIGHT;
+    if((BlackImage = (UBYTE *)malloc(Imagesize)) == NULL) {
+        printf("Failed to apply for black memory...\r\n");
+        return -1;
+    }
+    printf("Paint_NewImage\r\n");
+    Paint_NewImage(BlackImage, EPD_2in13_V3_WIDTH, EPD_2in13_V3_HEIGHT, 90, WHITE);
+	Paint_Clear(WHITE);
+
+#if 1   //show image for array    
+    printf("show image for array\r\n");
+    Paint_SelectImage(BlackImage);
+    Paint_Clear(WHITE);
+    Paint_DrawBitMap(gImage_2in13_2);
+
+    EPD_2in13_V3_Display(BlackImage);
+    DEV_Delay_ms(2000);
+#endif
+
+#if 1  // Drawing on the image
+	Paint_NewImage(BlackImage, EPD_2in13_V3_WIDTH, EPD_2in13_V3_HEIGHT, 90, WHITE);  	
+    printf("Drawing\r\n");
+    //1.Select Image
+    Paint_SelectImage(BlackImage);
+    Paint_Clear(WHITE);
+	
+    // 2.Drawing on the image
+    Paint_DrawPoint(5, 10, BLACK, DOT_PIXEL_1X1, DOT_STYLE_DFT);
+    Paint_DrawPoint(5, 25, BLACK, DOT_PIXEL_2X2, DOT_STYLE_DFT);
+    Paint_DrawPoint(5, 40, BLACK, DOT_PIXEL_3X3, DOT_STYLE_DFT);
+    Paint_DrawPoint(5, 55, BLACK, DOT_PIXEL_4X4, DOT_STYLE_DFT);
+
+    Paint_DrawLine(20, 10, 70, 60, BLACK, DOT_PIXEL_1X1, LINE_STYLE_SOLID);
+    Paint_DrawLine(70, 10, 20, 60, BLACK, DOT_PIXEL_1X1, LINE_STYLE_SOLID);
+    Paint_DrawRectangle(20, 10, 70, 60, BLACK, DOT_PIXEL_1X1, DRAW_FILL_EMPTY);
+    Paint_DrawRectangle(85, 10, 135, 60, BLACK, DOT_PIXEL_1X1, DRAW_FILL_FULL);
+
+    Paint_DrawLine(45, 15, 45, 55, BLACK, DOT_PIXEL_1X1, LINE_STYLE_DOTTED);
+    Paint_DrawLine(25, 35, 70, 35, BLACK, DOT_PIXEL_1X1, LINE_STYLE_DOTTED);
+    Paint_DrawCircle(45, 35, 20, BLACK, DOT_PIXEL_1X1, DRAW_FILL_EMPTY);
+    Paint_DrawCircle(110, 35, 20, WHITE, DOT_PIXEL_1X1, DRAW_FILL_FULL);
+
+    Paint_DrawString_EN(140, 15, "waveshare", &Font16, BLACK, WHITE);
+    Paint_DrawNum(140, 40, 123456789, &Font16, BLACK, WHITE);
+
+    Paint_DrawString_CN(140, 60, "<EFBFBD><EFBFBD><EFBFBD><EFBFBD>abc", &Font12CN, BLACK, WHITE);
+    Paint_DrawString_CN(5, 65, "΢ѩ<EFBFBD><EFBFBD><EFBFBD><EFBFBD>", &Font24CN, WHITE, BLACK);
+
+    EPD_2in13_V3_Display_Base(BlackImage);
+    DEV_Delay_ms(3000);
+#endif
+
+#if 1   //Partial refresh, example shows time    		
+	Paint_NewImage(BlackImage, EPD_2in13_V3_WIDTH, EPD_2in13_V3_HEIGHT, 90, WHITE);  
+    printf("Partial refresh\r\n");
+    Paint_SelectImage(BlackImage);
+	
+    PAINT_TIME sPaint_time;
+    sPaint_time.Hour = 12;
+    sPaint_time.Min = 34;
+    sPaint_time.Sec = 56;
+    UBYTE num = 10;
+    for (;;) {
+        sPaint_time.Sec = sPaint_time.Sec + 1;
+        if (sPaint_time.Sec == 60) {
+            sPaint_time.Min = sPaint_time.Min + 1;
+            sPaint_time.Sec = 0;
+            if (sPaint_time.Min == 60) {
+                sPaint_time.Hour =  sPaint_time.Hour + 1;
+                sPaint_time.Min = 0;
+                if (sPaint_time.Hour == 24) {
+                    sPaint_time.Hour = 0;
+                    sPaint_time.Min = 0;
+                    sPaint_time.Sec = 0;
+                }
+            }
+        }
+        Paint_ClearWindows(150, 80, 150 + Font20.Width * 7, 80 + Font20.Height, WHITE);
+        Paint_DrawTime(150, 80, &sPaint_time, &Font20, WHITE, BLACK);
+
+        num = num - 1;
+        if(num == 0) {
+            break;
+        }
+		EPD_2in13_V3_Display_Partial(BlackImage);
+        DEV_Delay_ms(500);//Analog clock 1s
+    }
+#endif
+
+	printf("Clear...\r\n");
+	EPD_2in13_V3_Init();
+    EPD_2in13_V3_Clear();
+	
+    printf("Goto Sleep...\r\n");
+    EPD_2in13_V3_Sleep();
+    free(BlackImage);
+    BlackImage = NULL;
+    DEV_Delay_ms(2000);//important, at least 2s
+    // close 5V
+    printf("close 5V, Module enters 0 power consumption ...\r\n");
+    DEV_Module_Exit();
+    return 0;
+}
+

Pico_ePaper_Code/c/examples/EPD_2in13_V4_test.c

@@ -0,0 +1,152 @@
+/*****************************************************************************
+* | File      	:   EPD_2in13_V4_test.c
+* | Author      :   Waveshare team
+* | Function    :   2.13inch e-paper V4 test demo
+* | Info        :
+*----------------
+* |	This version:   V1.0
+* | Date        :   2023-08-12
+* | Info        :
+#
+# Permission is hereby granted, free of charge, to any person obtaining a copy
+# of this software and associated documnetation files (the "Software"), to deal
+# in the Software without restriction, including without limitation the rights
+# to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+# copies of the Software, and to permit persons to  whom the Software is
+# furished to do so, subject to the following conditions:
+#
+# The above copyright notice and this permission notice shall be included in
+# all copies or substantial portions of the Software.
+#
+# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+# FITNESS OR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+# AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+# LIABILITY WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+# OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+# THE SOFTWARE.
+#
+******************************************************************************/
+#include "EPD_Test.h"
+#include "EPD_2in13_V4.h"
+
+int EPD_2in13_V4_test(void)
+{
+
+    Debug("EPD_2in13_V4_test Demo\r\n");
+    if(DEV_Module_Init()!=0){
+        return -1;
+    }
+
+    Debug("e-Paper Init and Clear...\r\n");
+	EPD_2in13_V4_Init();
+    EPD_2in13_V4_Clear();
+
+    //Create a new image cache
+    UBYTE *BlackImage;
+    UWORD Imagesize = ((EPD_2in13_V4_WIDTH % 8 == 0)? (EPD_2in13_V4_WIDTH / 8 ): (EPD_2in13_V4_WIDTH / 8 + 1)) * EPD_2in13_V4_HEIGHT;
+    if((BlackImage = (UBYTE *)malloc(Imagesize)) == NULL) {
+        Debug("Failed to apply for black memory...\r\n");
+        return -1;
+    }
+    Debug("Paint_NewImage\r\n");
+    Paint_NewImage(BlackImage, EPD_2in13_V4_WIDTH, EPD_2in13_V4_HEIGHT, 90, WHITE);
+	Paint_Clear(WHITE);
+
+#if 1   //show image for array    
+    Debug("show image for array\r\n");
+    EPD_2in13_V4_Init_Fast();
+    Paint_SelectImage(BlackImage);
+    Paint_Clear(WHITE);
+    Paint_DrawBitMap(gImage_2in13_2);
+
+    EPD_2in13_V4_Display_Fast(BlackImage);
+    DEV_Delay_ms(2000);
+#endif
+
+#if 1  // Drawing on the image
+	Paint_NewImage(BlackImage, EPD_2in13_V4_WIDTH, EPD_2in13_V4_HEIGHT, 90, WHITE);  	
+    Debug("Drawing\r\n");
+    //1.Select Image
+    EPD_2in13_V4_Init();
+    Paint_SelectImage(BlackImage);
+    Paint_Clear(WHITE);
+	
+    // 2.Drawing on the image
+    Paint_DrawPoint(5, 10, BLACK, DOT_PIXEL_1X1, DOT_STYLE_DFT);
+    Paint_DrawPoint(5, 25, BLACK, DOT_PIXEL_2X2, DOT_STYLE_DFT);
+    Paint_DrawPoint(5, 40, BLACK, DOT_PIXEL_3X3, DOT_STYLE_DFT);
+    Paint_DrawPoint(5, 55, BLACK, DOT_PIXEL_4X4, DOT_STYLE_DFT);
+
+    Paint_DrawLine(20, 10, 70, 60, BLACK, DOT_PIXEL_1X1, LINE_STYLE_SOLID);
+    Paint_DrawLine(70, 10, 20, 60, BLACK, DOT_PIXEL_1X1, LINE_STYLE_SOLID);
+    Paint_DrawRectangle(20, 10, 70, 60, BLACK, DOT_PIXEL_1X1, DRAW_FILL_EMPTY);
+    Paint_DrawRectangle(85, 10, 135, 60, BLACK, DOT_PIXEL_1X1, DRAW_FILL_FULL);
+
+    Paint_DrawLine(45, 15, 45, 55, BLACK, DOT_PIXEL_1X1, LINE_STYLE_DOTTED);
+    Paint_DrawLine(25, 35, 70, 35, BLACK, DOT_PIXEL_1X1, LINE_STYLE_DOTTED);
+    Paint_DrawCircle(45, 35, 20, BLACK, DOT_PIXEL_1X1, DRAW_FILL_EMPTY);
+    Paint_DrawCircle(110, 35, 20, WHITE, DOT_PIXEL_1X1, DRAW_FILL_FULL);
+
+    Paint_DrawString_EN(140, 15, "waveshare", &Font16, BLACK, WHITE);
+    Paint_DrawNum(140, 40, 123456789, &Font16, BLACK, WHITE);
+
+    Paint_DrawString_CN(140, 60, "<EFBFBD><EFBFBD><EFBFBD><EFBFBD>abc", &Font12CN, BLACK, WHITE);
+    Paint_DrawString_CN(5, 65, "΢ѩ<EFBFBD><EFBFBD><EFBFBD><EFBFBD>", &Font24CN, WHITE, BLACK);
+
+    EPD_2in13_V4_Display_Base(BlackImage);
+    DEV_Delay_ms(3000);
+#endif
+
+#if 1   //Partial refresh, example shows time
+	Paint_NewImage(BlackImage, EPD_2in13_V4_WIDTH, EPD_2in13_V4_HEIGHT, 90, WHITE);  
+    Debug("Partial refresh\r\n");
+    Paint_SelectImage(BlackImage);
+	
+    PAINT_TIME sPaint_time;
+    sPaint_time.Hour = 12;
+    sPaint_time.Min = 34;
+    sPaint_time.Sec = 56;
+    UBYTE num = 10;
+    for (;;) {
+        sPaint_time.Sec = sPaint_time.Sec + 1;
+        if (sPaint_time.Sec == 60) {
+            sPaint_time.Min = sPaint_time.Min + 1;
+            sPaint_time.Sec = 0;
+            if (sPaint_time.Min == 60) {
+                sPaint_time.Hour =  sPaint_time.Hour + 1;
+                sPaint_time.Min = 0;
+                if (sPaint_time.Hour == 24) {
+                    sPaint_time.Hour = 0;
+                    sPaint_time.Min = 0;
+                    sPaint_time.Sec = 0;
+                }
+            }
+        }
+        Paint_ClearWindows(150, 80, 150 + Font20.Width * 7, 80 + Font20.Height, WHITE);
+        Paint_DrawTime(150, 80, &sPaint_time, &Font20, WHITE, BLACK);
+
+        num = num - 1;
+        if(num == 0) {
+            break;
+        }
+		EPD_2in13_V4_Display_Partial(BlackImage);
+        DEV_Delay_ms(500);//Analog clock 1s
+    }
+#endif
+
+	Debug("Clear...\r\n");
+	EPD_2in13_V4_Init();
+    EPD_2in13_V4_Clear();
+	
+    Debug("Goto Sleep...\r\n");
+    EPD_2in13_V4_Sleep();
+    free(BlackImage);
+    BlackImage = NULL;
+    DEV_Delay_ms(2000);//important, at least 2s
+    // close 5V
+    Debug("close 5V, Module enters 0 power consumption ...\r\n");
+    DEV_Module_Exit();
+    return 0;
+}
+

Pico_ePaper_Code/c/examples/EPD_2in13b_V3_test.c

@@ -0,0 +1,123 @@
+/*****************************************************************************
+* | File      	:   EPD_2in13b_V3_test.c
+* | Author      :   Waveshare team
+* | Function    :   2.13inch B V3 e-paper test demo
+* | Info        :
+*----------------
+* |	This version:   V1.0
+* | Date        :   2020-04-13
+* | Info        :
+* -----------------------------------------------------------------------------
+#
+# Permission is hereby granted, free of charge, to any person obtaining a copy
+# of this software and associated documnetation files (the "Software"), to deal
+# in the Software without restriction, including without limitation the rights
+# to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+# copies of the Software, and to permit persons to  whom the Software is
+# furished to do so, subject to the following conditions:
+#
+# The above copyright notice and this permission notice shall be included in
+# all copies or substantial portions of the Software.
+#
+# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+# FITNESS OR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+# AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+# LIABILITY WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+# OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+# THE SOFTWARE.
+#
+******************************************************************************/
+#include "EPD_Test.h"
+#include "EPD_2in13b_V3.h"
+
+int EPD_2in13b_V3_test(void)
+{
+    printf("EPD_2IN13B_V3_test Demo\r\n");
+    if(DEV_Module_Init()!=0){
+        return -1;
+    }
+
+    printf("e-Paper Init and Clear...\r\n");
+    EPD_2IN13B_V3_Init();
+    EPD_2IN13B_V3_Clear();
+    DEV_Delay_ms(500);
+
+    //Create a new image cache named IMAGE_BW and fill it with white
+    UBYTE *BlackImage, *RYImage; // Red or Yellow
+    UWORD Imagesize = ((EPD_2IN13B_V3_WIDTH % 8 == 0)? (EPD_2IN13B_V3_WIDTH / 8 ): (EPD_2IN13B_V3_WIDTH / 8 + 1)) * EPD_2IN13B_V3_HEIGHT;
+    if((BlackImage = (UBYTE *)malloc(Imagesize)) == NULL) {
+        printf("Failed to apply for black memory...\r\n");
+        return -1;
+    }
+    if((RYImage = (UBYTE *)malloc(Imagesize)) == NULL) {
+        printf("Failed to apply for red memory...\r\n");
+        return -1;
+    }
+    printf("NewImage:BlackImage and RYImage\r\n");
+    Paint_NewImage(BlackImage, EPD_2IN13B_V3_WIDTH, EPD_2IN13B_V3_HEIGHT, 270, WHITE);
+    Paint_NewImage(RYImage, EPD_2IN13B_V3_WIDTH, EPD_2IN13B_V3_HEIGHT, 270, WHITE);
+
+    //Select Image
+    Paint_SelectImage(BlackImage);
+    Paint_Clear(WHITE);
+    Paint_SelectImage(RYImage);
+    Paint_Clear(WHITE); 
+    
+#if 1   // show image for array    
+    printf("show image for array\r\n");
+//    EPD_2IN13B_V3_Display(gImage_2in13b_b, gImage_2in13b_r);
+
+    EPD_2IN13B_V3_Display(gImage_2in13c_b, gImage_2in13c_y);
+    DEV_Delay_ms(2000);
+#endif
+
+#if 0   // Drawing on the image
+    /*Horizontal screen*/
+    //1.Draw black image
+    printf("Draw black image\r\n");
+    Paint_SelectImage(BlackImage);
+    Paint_Clear(WHITE);
+    Paint_DrawPoint(5, 70, BLACK, DOT_PIXEL_1X1, DOT_STYLE_DFT);
+    Paint_DrawPoint(5, 80, BLACK, DOT_PIXEL_2X2, DOT_STYLE_DFT);
+    Paint_DrawLine(20, 70, 50, 100, BLACK, DOT_PIXEL_1X1, LINE_STYLE_SOLID);
+    Paint_DrawLine(50, 70, 20, 100, BLACK, DOT_PIXEL_1X1, LINE_STYLE_SOLID);
+    Paint_DrawRectangle(60, 70, 90, 100, BLACK, DOT_PIXEL_1X1, DRAW_FILL_FULL);
+    Paint_DrawCircle(125, 85, 15, BLACK, DOT_PIXEL_1X1, DRAW_FILL_EMPTY);
+    Paint_DrawString_CN(5, 15, "<22><><EFBFBD><EFBFBD>abc", &Font12CN, WHITE, BLACK);
+
+    //2.Draw red image
+    printf("Draw red image\r\n");
+    Paint_SelectImage(RYImage);
+    Paint_Clear(WHITE);
+    Paint_DrawPoint(5, 90, RED, DOT_PIXEL_3X3, DOT_STYLE_DFT);
+    Paint_DrawPoint(5, 100, RED, DOT_PIXEL_4X4, DOT_STYLE_DFT);
+    Paint_DrawLine(125, 70, 125, 100, RED, DOT_PIXEL_1X1, LINE_STYLE_DOTTED);
+    Paint_DrawLine(110, 85, 140, 85, RED, DOT_PIXEL_1X1, LINE_STYLE_DOTTED);
+    Paint_DrawRectangle(20, 70, 50, 100, RED, DOT_PIXEL_1X1, DRAW_FILL_EMPTY);
+    Paint_DrawCircle(165, 85, 15, RED, DOT_PIXEL_1X1, DRAW_FILL_FULL);
+    Paint_DrawString_EN(5, 0, "waveshare Electronics", &Font12, BLACK, WHITE);
+    Paint_DrawNum(5, 50, 987654321, &Font16, WHITE, RED);
+
+    printf("EPD_Display\r\n");
+    EPD_2IN13B_V3_Display(BlackImage, RYImage);
+    DEV_Delay_ms(2000);
+#endif
+
+    printf("Clear...\r\n");
+    EPD_2IN13B_V3_Clear();
+
+    printf("Goto Sleep...\r\n");
+    EPD_2IN13B_V3_Sleep();
+    free(BlackImage);
+    free(RYImage);
+    BlackImage = NULL;
+    RYImage = NULL;
+    DEV_Delay_ms(2000);//important, at least 2s
+    // close 5V
+    printf("close 5V, Module enters 0 power consumption ...\r\n");
+    DEV_Module_Exit();
+    
+    return 0;
+}
+

Pico_ePaper_Code/c/examples/EPD_2in13b_V4_test.c

@@ -0,0 +1,122 @@
+/*****************************************************************************
+* | File      	:   EPD_2in13b_V4_test.c
+* | Author      :   Waveshare team
+* | Function    :   2.13inch B V4 e-paper test demo
+* | Info        :
+*----------------
+* |	This version:   V1.0
+* | Date        :   2022-08-20
+* | Info        :
+* -----------------------------------------------------------------------------
+#
+# Permission is hereby granted, free of charge, to any person obtaining a copy
+# of this software and associated documnetation files (the "Software"), to deal
+# in the Software without restriction, including without limitation the rights
+# to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+# copies of the Software, and to permit persons to  whom the Software is
+# furished to do so, subject to the following conditions:
+#
+# The above copyright notice and this permission notice shall be included in
+# all copies or substantial portions of the Software.
+#
+# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+# FITNESS OR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+# AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+# LIABILITY WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+# OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+# THE SOFTWARE.
+#
+******************************************************************************/
+#include "EPD_Test.h"
+#include "EPD_2in13b_V4.h"
+#include "time.h"
+
+int EPD_2in13b_V4_test(void)
+{
+    printf("EPD_2IN13B_V4_test Demo\r\n");
+    if(DEV_Module_Init()!=0){
+        return -1;
+    }
+
+    printf("e-Paper Init and Clear...\r\n");
+    EPD_2IN13B_V4_Init();
+    EPD_2IN13B_V4_Clear();
+    DEV_Delay_ms(500);
+
+    //Create a new image cache named IMAGE_BW and fill it with white
+    UBYTE *BlackImage, *RYImage; // Red or Yellow
+    UWORD Imagesize = ((EPD_2IN13B_V4_WIDTH % 8 == 0)? (EPD_2IN13B_V4_WIDTH / 8 ): (EPD_2IN13B_V4_WIDTH / 8 + 1)) * EPD_2IN13B_V4_HEIGHT;
+    if((BlackImage = (UBYTE *)malloc(Imagesize)) == NULL) {
+        printf("Failed to apply for black memory...\r\n");
+        return -1;
+    }
+    if((RYImage = (UBYTE *)malloc(Imagesize)) == NULL) {
+        printf("Failed to apply for red memory...\r\n");
+        return -1;
+    }
+    printf("NewImage:BlackImage and RYImage\r\n");
+    Paint_NewImage(BlackImage, EPD_2IN13B_V4_WIDTH, EPD_2IN13B_V4_HEIGHT, 90, WHITE);
+    Paint_NewImage(RYImage, EPD_2IN13B_V4_WIDTH, EPD_2IN13B_V4_HEIGHT, 90, WHITE);
+
+    //Select Image
+    Paint_SelectImage(BlackImage);
+    Paint_Clear(WHITE);
+    Paint_SelectImage(RYImage);
+    Paint_Clear(WHITE);
+
+#if 1   // show image for array    
+    printf("show image for array\r\n");
+    EPD_2IN13B_V4_Display(gImage_2in13b_V4b, gImage_2in13b_V4r);
+    DEV_Delay_ms(2000);
+#endif
+
+#if 1   // Drawing on the image
+    /*Horizontal screen*/
+    //1.Draw black image
+    printf("Draw black image\r\n");
+    Paint_SelectImage(BlackImage);
+    Paint_Clear(WHITE);
+    Paint_DrawPoint(5, 70, BLACK, DOT_PIXEL_1X1, DOT_STYLE_DFT);
+    Paint_DrawPoint(5, 80, BLACK, DOT_PIXEL_2X2, DOT_STYLE_DFT);
+    Paint_DrawLine(20, 70, 50, 100, BLACK, DOT_PIXEL_1X1, LINE_STYLE_SOLID);
+    Paint_DrawLine(50, 70, 20, 100, BLACK, DOT_PIXEL_1X1, LINE_STYLE_SOLID);
+    Paint_DrawRectangle(60, 70, 90, 100, BLACK, DOT_PIXEL_1X1, DRAW_FILL_FULL);
+    Paint_DrawCircle(125, 85, 15, BLACK, DOT_PIXEL_1X1, DRAW_FILL_EMPTY);
+    Paint_DrawString_CN(5, 15, "<EFBFBD><EFBFBD><EFBFBD><EFBFBD>abc", &Font12CN, WHITE, BLACK);
+
+    //2.Draw red image
+    printf("Draw red image\r\n");
+    Paint_SelectImage(RYImage);
+    Paint_Clear(WHITE);
+    Paint_DrawPoint(5, 90, RED, DOT_PIXEL_3X3, DOT_STYLE_DFT);
+    Paint_DrawPoint(5, 100, RED, DOT_PIXEL_4X4, DOT_STYLE_DFT);
+    Paint_DrawLine(125, 70, 125, 100, RED, DOT_PIXEL_1X1, LINE_STYLE_DOTTED);
+    Paint_DrawLine(110, 85, 140, 85, RED, DOT_PIXEL_1X1, LINE_STYLE_DOTTED);
+    Paint_DrawRectangle(20, 70, 50, 100, RED, DOT_PIXEL_1X1, DRAW_FILL_EMPTY);
+    Paint_DrawCircle(165, 85, 15, RED, DOT_PIXEL_1X1, DRAW_FILL_FULL);
+    Paint_DrawString_EN(5, 0, "waveshare Electronics", &Font12, BLACK, WHITE);
+    Paint_DrawNum(5, 50, 987654321, &Font16, WHITE, RED);
+
+    printf("EPD_Display\r\n");
+    EPD_2IN13B_V4_Display(BlackImage, RYImage);
+    DEV_Delay_ms(5000);
+#endif
+
+    printf("Clear...\r\n");
+    EPD_2IN13B_V4_Clear();
+
+    printf("Goto Sleep...\r\n");
+    EPD_2IN13B_V4_Sleep();
+    free(BlackImage);
+    free(RYImage);
+    BlackImage = NULL;
+    RYImage = NULL;
+    DEV_Delay_ms(2000);//important, at least 2s
+    // close 5V
+    printf("close 5V, Module enters 0 power consumption ...\r\n");
+    DEV_Module_Exit();
+    
+    return 0;
+}
+

Pico_ePaper_Code/c/examples/EPD_2in13bc_test.c

@@ -0,0 +1,122 @@
+/*****************************************************************************
+* | File      	:   EPD_2in13bc_test.c
+* | Author      :   Waveshare team
+* | Function    :   2.13inch B&C e-paper test demo
+* | Info        :
+*----------------
+* |	This version:   V1.0
+* | Date        :   2019-06-13
+* | Info        :
+#
+# Permission is hereby granted, free of charge, to any person obtaining a copy
+# of this software and associated documnetation files (the "Software"), to deal
+# in the Software without restriction, including without limitation the rights
+# to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+# copies of the Software, and to permit persons to  whom the Software is
+# furished to do so, subject to the following conditions:
+#
+# The above copyright notice and this permission notice shall be included in
+# all copies or substantial portions of the Software.
+#
+# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+# FITNESS OR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+# AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+# LIABILITY WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+# OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+# THE SOFTWARE.
+#
+******************************************************************************/
+#include "EPD_Test.h"
+#include "EPD_2in13bc.h"
+
+int EPD_2in13bc_test(void)
+{
+    printf("EPD_2IN13BC_test Demo\r\n");
+    if(DEV_Module_Init()!=0){
+        return -1;
+    }
+
+    printf("e-Paper Init and Clear...\r\n");
+    EPD_2IN13BC_Init();
+    EPD_2IN13BC_Clear();
+    DEV_Delay_ms(500);
+
+    //Create a new image cache named IMAGE_BW and fill it with white
+    UBYTE *BlackImage, *RYImage; // Red or Yellow
+    UWORD Imagesize = ((EPD_2IN13BC_WIDTH % 8 == 0)? (EPD_2IN13BC_WIDTH / 8 ): (EPD_2IN13BC_WIDTH / 8 + 1)) * EPD_2IN13BC_HEIGHT;
+    if((BlackImage = (UBYTE *)malloc(Imagesize)) == NULL) {
+        printf("Failed to apply for black memory...\r\n");
+        return -1;
+    }
+    if((RYImage = (UBYTE *)malloc(Imagesize)) == NULL) {
+        printf("Failed to apply for red memory...\r\n");
+        return -1;
+    }
+    printf("NewImage:BlackImage and RYImage\r\n");
+    Paint_NewImage(BlackImage, EPD_2IN13BC_WIDTH, EPD_2IN13BC_HEIGHT, 270, WHITE);
+    Paint_NewImage(RYImage, EPD_2IN13BC_WIDTH, EPD_2IN13BC_HEIGHT, 270, WHITE);
+
+    //Select Image
+    Paint_SelectImage(BlackImage);
+    Paint_Clear(WHITE);
+    Paint_SelectImage(RYImage);
+    Paint_Clear(WHITE); 
+    
+#if 1   // show image for array    
+    printf("show image for array\r\n");
+//    EPD_2IN13BC_Display(gImage_2in13b_b, gImage_2in13b_r);
+
+    EPD_2IN13BC_Display(gImage_2in13c_b, gImage_2in13c_y);
+    DEV_Delay_ms(2000);
+#endif
+
+#if 1   // Drawing on the image
+    /*Horizontal screen*/
+    //1.Draw black image
+    printf("Draw black image\r\n");
+    Paint_SelectImage(BlackImage);
+    Paint_Clear(WHITE);
+    Paint_DrawPoint(5, 70, BLACK, DOT_PIXEL_1X1, DOT_STYLE_DFT);
+    Paint_DrawPoint(5, 80, BLACK, DOT_PIXEL_2X2, DOT_STYLE_DFT);
+    Paint_DrawLine(20, 70, 50, 100, BLACK, DOT_PIXEL_1X1, LINE_STYLE_SOLID);
+    Paint_DrawLine(50, 70, 20, 100, BLACK, DOT_PIXEL_1X1, LINE_STYLE_SOLID);
+    Paint_DrawRectangle(60, 70, 90, 100, BLACK, DOT_PIXEL_1X1, DRAW_FILL_FULL);
+    Paint_DrawCircle(125, 85, 15, BLACK, DOT_PIXEL_1X1, DRAW_FILL_EMPTY);
+    Paint_DrawString_CN(5, 15, "<EFBFBD><EFBFBD><EFBFBD><EFBFBD>abc", &Font12CN, WHITE, BLACK);
+
+    //2.Draw red image
+    printf("Draw red image\r\n");
+    Paint_SelectImage(RYImage);
+    Paint_Clear(WHITE);
+    Paint_DrawPoint(5, 90, RED, DOT_PIXEL_3X3, DOT_STYLE_DFT);
+    Paint_DrawPoint(5, 100, RED, DOT_PIXEL_4X4, DOT_STYLE_DFT);
+    Paint_DrawLine(125, 70, 125, 100, RED, DOT_PIXEL_1X1, LINE_STYLE_DOTTED);
+    Paint_DrawLine(110, 85, 140, 85, RED, DOT_PIXEL_1X1, LINE_STYLE_DOTTED);
+    Paint_DrawRectangle(20, 70, 50, 100, RED, DOT_PIXEL_1X1, DRAW_FILL_EMPTY);
+    Paint_DrawCircle(165, 85, 15, RED, DOT_PIXEL_1X1, DRAW_FILL_FULL);
+    Paint_DrawString_EN(5, 0, "waveshare Electronics", &Font12, BLACK, WHITE);
+    Paint_DrawNum(5, 50, 987654321, &Font16, WHITE, RED);
+
+    printf("EPD_Display\r\n");
+    EPD_2IN13BC_Display(BlackImage, RYImage);
+    DEV_Delay_ms(2000);
+#endif
+
+    printf("Clear...\r\n");
+    EPD_2IN13BC_Clear();
+
+    printf("Goto Sleep...\r\n");
+    EPD_2IN13BC_Sleep();
+    free(BlackImage);
+    free(RYImage);
+    BlackImage = NULL;
+    RYImage = NULL;
+    DEV_Delay_ms(2000);//important, at least 2s
+    // close 5V
+    printf("close 5V, Module enters 0 power consumption ...\r\n");
+    DEV_Module_Exit();
+    
+    return 0;
+}
+

Pico_ePaper_Code/c/examples/EPD_2in13d_test.c

@@ -0,0 +1,147 @@
+/*****************************************************************************
+* | File      	:   EPD_2in13d_test.c
+* | Author      :   Waveshare team
+* | Function    :   2.9inch e-paper test demo
+* | Info        :
+*----------------
+* |	This version:   V1.0
+* | Date        :   2019-06-13
+* | Info        :
+#
+# Permission is hereby granted, free of charge, to any person obtaining a copy
+# of this software and associated documnetation files (the "Software"), to deal
+# in the Software without restriction, including without limitation the rights
+# to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+# copies of the Software, and to permit persons to  whom the Software is
+# furished to do so, subject to the following conditions:
+#
+# The above copyright notice and this permission notice shall be included in
+# all copies or substantial portions of the Software.
+#
+# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+# FITNESS OR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+# AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+# LIABILITY WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+# OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+# THE SOFTWARE.
+#
+******************************************************************************/
+#include "EPD_Test.h"
+#include "EPD_2in13d.h"
+
+int EPD_2in13d_test(void)
+{
+    printf("EPD_2IN13D_test Demo\r\n");
+    if(DEV_Module_Init()!=0){
+        return -1;
+    }
+
+    printf("e-Paper Init and Clear...\r\n");
+    EPD_2IN13D_Init();
+    EPD_2IN13D_Clear();
+    DEV_Delay_ms(500);
+
+    //Create a new image cache
+    UBYTE *BlackImage;
+    /* you have to edit the startup_stm32fxxx.s file and set a big enough heap size */
+    UWORD Imagesize = ((EPD_2IN13D_WIDTH % 8 == 0)? (EPD_2IN13D_WIDTH / 8 ): (EPD_2IN13D_WIDTH / 8 + 1)) * EPD_2IN13D_HEIGHT;
+    if((BlackImage = (UBYTE *)malloc(Imagesize)) == NULL) {
+        printf("Failed to apply for black memory...\r\n");
+        return -1;
+    }
+    printf("Paint_NewImage\r\n");
+    Paint_NewImage(BlackImage, EPD_2IN13D_WIDTH, EPD_2IN13D_HEIGHT, 270, WHITE);
+    
+#if 1   //show image for array    
+    printf("show image for array\r\n");
+    Paint_SelectImage(BlackImage);
+    Paint_Clear(WHITE);
+    Paint_DrawBitMap(gImage_2in13d);
+
+    EPD_2IN13D_Display(BlackImage);
+    DEV_Delay_ms(2000);
+#endif
+
+#if 1   // Drawing on the image
+    printf("Drawing\r\n");
+    //1.Select Image
+    Paint_SelectImage(BlackImage);
+    Paint_Clear(WHITE);
+
+    // 2.Drawing on the image
+    Paint_DrawString_EN(5, 5, "waveshare", &Font16, BLACK, WHITE);
+    Paint_DrawNum(5, 25, 123456789, &Font16, BLACK, WHITE);
+    Paint_DrawString_CN(5, 35,"<EFBFBD><EFBFBD><EFBFBD><EFBFBD>abc", &Font12CN, BLACK, WHITE);
+    Paint_DrawString_CN(5, 60,"΢ѩ<EFBFBD><EFBFBD><EFBFBD><EFBFBD>", &Font24CN, WHITE, BLACK);
+    EPD_2IN13D_Display(BlackImage);
+    DEV_Delay_ms(1000);
+
+    Paint_Clear(WHITE);
+    Paint_DrawPoint(5, 10, BLACK, DOT_PIXEL_1X1, DOT_STYLE_DFT);
+    Paint_DrawPoint(5, 25, BLACK, DOT_PIXEL_2X2, DOT_STYLE_DFT);
+    Paint_DrawPoint(5, 40, BLACK, DOT_PIXEL_3X3, DOT_STYLE_DFT);
+    Paint_DrawPoint(5, 55, BLACK, DOT_PIXEL_4X4, DOT_STYLE_DFT);
+    Paint_DrawLine(20, 10, 70, 60, BLACK, DOT_PIXEL_1X1, LINE_STYLE_SOLID);
+    Paint_DrawLine(70, 10, 20, 60, BLACK, DOT_PIXEL_1X1, LINE_STYLE_SOLID);
+    Paint_DrawLine(170, 15, 170, 55, BLACK, DOT_PIXEL_1X1, LINE_STYLE_DOTTED);
+    Paint_DrawLine(150, 35, 190, 35, BLACK, DOT_PIXEL_1X1, LINE_STYLE_DOTTED);
+    Paint_DrawRectangle(20, 10, 70, 60, BLACK, DOT_PIXEL_1X1, DRAW_FILL_EMPTY);
+    Paint_DrawRectangle(85, 10, 130, 60, BLACK, DOT_PIXEL_1X1, DRAW_FILL_FULL);
+    Paint_DrawCircle(170, 35, 20, BLACK, DOT_PIXEL_1X1, DRAW_FILL_EMPTY);
+    Paint_DrawCircle(170, 80, 20, BLACK, DOT_PIXEL_1X1, DRAW_FILL_FULL);
+    EPD_2IN13D_Display(BlackImage);
+    DEV_Delay_ms(2000);
+#endif
+
+#if 0   //Partial refresh, example shows time    		
+    printf("Partial refresh\r\n");
+    Paint_SelectImage(BlackImage);
+    PAINT_TIME sPaint_time;
+    sPaint_time.Hour = 12;
+    sPaint_time.Min = 34;
+    sPaint_time.Sec = 56;
+    UBYTE num = 10;
+    for (;;) {
+        sPaint_time.Sec = sPaint_time.Sec + 1;
+        if (sPaint_time.Sec == 60) {
+            sPaint_time.Min = sPaint_time.Min + 1;
+            sPaint_time.Sec = 0;
+            if (sPaint_time.Min == 60) {
+                sPaint_time.Hour =  sPaint_time.Hour + 1;
+                sPaint_time.Min = 0;
+                if (sPaint_time.Hour == 24) {
+                    sPaint_time.Hour = 0;
+                    sPaint_time.Min = 0;
+                    sPaint_time.Sec = 0;
+                }
+            }
+        }
+        Paint_ClearWindows(15, 65, 15 + Font20.Width * 7, 65 + Font20.Height, WHITE);
+        Paint_DrawTime(15, 65, &sPaint_time, &Font20, WHITE, BLACK);
+
+        num = num - 1;
+        if(num == 0) {
+            break;
+        }
+        EPD_2IN13D_DisplayPart(BlackImage);
+        DEV_Delay_ms(500);//Analog clock 1s
+    }
+#endif
+    printf("Clear...\r\n");
+    EPD_2IN13D_Init();
+    EPD_2IN13D_Clear();
+	
+    printf("Goto Sleep...\r\n");
+    EPD_2IN13D_Sleep();
+    free(BlackImage);
+    BlackImage = NULL;
+    DEV_Delay_ms(2000);//important, at least 2s
+
+    // close 5V
+    printf("close 5V, Module enters 0 power consumption ...\r\n");
+    DEV_Module_Exit();
+    
+    return 0;
+}
+

Pico_ePaper_Code/c/examples/EPD_2in66_test.c

@@ -0,0 +1,160 @@
+/*****************************************************************************
+* | File      	:   EPD_2IN66_test.c
+* | Author      :   Waveshare team
+* | Function    :   2.66inch e-paper test demo
+* | Info        :
+*----------------
+* |	This version:   V1.0
+* | Date        :   2020-07-29
+* | Info        :
+#
+# Permission is hereby granted, free of charge, to any person obtaining a copy
+# of this software and associated documnetation files (the "Software"), to deal
+# in the Software without restriction, including without limitation the rights
+# to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+# copies of the Software, and to permit persons to  whom the Software is
+# furished to do so, subject to the following conditions:
+#
+# The above copyright notice and this permission notice shall be included in
+# all copies or substantial portions of the Software.
+#
+# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+# FITNESS OR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+# AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+# LIABILITY WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+# OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+# THE SOFTWARE.
+#
+******************************************************************************/
+#include "EPD_Test.h"
+#include "EPD_2in66.h"
+
+int EPD_2in66_test(void)
+{
+    printf("EPD_2IN66_test Demo\r\n");
+    if(DEV_Module_Init()!=0){
+        return -1;
+    }
+
+    printf("e-Paper Init and Clear...\r\n");
+    EPD_2IN66_Init();
+    EPD_2IN66_Clear();
+    DEV_Delay_ms(500);
+
+    //Create a new image cache
+    UBYTE *BlackImage;
+    /* you have to edit the startup_stm32fxxx.s file and set a big enough heap size */
+    UWORD Imagesize = ((EPD_2IN66_WIDTH % 8 == 0)? (EPD_2IN66_WIDTH / 8 ): (EPD_2IN66_WIDTH / 8 + 1)) * EPD_2IN66_HEIGHT;
+    if((BlackImage = (UBYTE *)malloc(Imagesize)) == NULL) {
+        printf("Failed to apply for black memory...\r\n");
+        return -1;
+    }
+    printf("Paint_NewImage\r\n");
+    Paint_NewImage(BlackImage, EPD_2IN66_WIDTH, EPD_2IN66_HEIGHT, 270, WHITE);
+
+#if 1   //show image for array    
+    printf("show image for array\r\n");
+    Paint_SelectImage(BlackImage);
+    Paint_Clear(WHITE);
+    Paint_DrawBitMap(gImage_2in66);
+
+    EPD_2IN66_Display(BlackImage);
+    DEV_Delay_ms(2000);
+#endif
+
+#if 1   // Drawing on the image
+    //1.Select Image
+    Paint_SelectImage(BlackImage);
+    Paint_Clear(WHITE);
+
+    // 2.Drawing on the image
+    printf("Drawing:BlackImage\r\n");
+    Paint_DrawPoint(10, 80, BLACK, DOT_PIXEL_1X1, DOT_STYLE_DFT);
+    Paint_DrawPoint(10, 90, BLACK, DOT_PIXEL_2X2, DOT_STYLE_DFT);
+    Paint_DrawPoint(10, 100, BLACK, DOT_PIXEL_3X3, DOT_STYLE_DFT);
+
+    Paint_DrawLine(20, 70, 70, 120, BLACK, DOT_PIXEL_1X1, LINE_STYLE_SOLID);
+    Paint_DrawLine(70, 70, 20, 120, BLACK, DOT_PIXEL_1X1, LINE_STYLE_SOLID);
+
+    Paint_DrawRectangle(20, 70, 70, 120, BLACK, DOT_PIXEL_1X1, DRAW_FILL_EMPTY);
+    Paint_DrawRectangle(80, 70, 130, 120, BLACK, DOT_PIXEL_1X1, DRAW_FILL_FULL);
+	
+    Paint_DrawCircle(45, 95, 20, BLACK, DOT_PIXEL_1X1, DRAW_FILL_EMPTY);
+    Paint_DrawCircle(105, 95, 20, WHITE, DOT_PIXEL_1X1, DRAW_FILL_FULL);
+
+    Paint_DrawLine(85, 95, 125, 95, BLACK, DOT_PIXEL_1X1, LINE_STYLE_DOTTED);
+    Paint_DrawLine(105, 75, 105, 115, BLACK, DOT_PIXEL_1X1, LINE_STYLE_DOTTED);
+
+    Paint_DrawString_EN(10, 0, "waveshare", &Font16, BLACK, WHITE);
+    Paint_DrawString_EN(10, 20, "hello world", &Font12, WHITE, BLACK);
+
+    Paint_DrawNum(10, 33, 123456789, &Font12, BLACK, WHITE);
+    Paint_DrawNum(10, 50, 987654321, &Font16, WHITE, BLACK);
+
+    Paint_DrawString_CN(130, 0,"<EFBFBD><EFBFBD><EFBFBD><EFBFBD>abc", &Font12CN, BLACK, WHITE);
+    Paint_DrawString_CN(130, 20, "΢ѩ<EFBFBD><EFBFBD><EFBFBD><EFBFBD>", &Font24CN, WHITE, BLACK);
+
+    EPD_2IN66_Display(BlackImage);
+    DEV_Delay_ms(4000);   
+#endif
+
+#if 1	//partial refresh, show time
+    printf("EPD_2IN66_DisplayPart\r\n");
+    EPD_2IN66_Init_Partial();
+	
+	Paint_SelectImage(BlackImage);
+	
+	PAINT_TIME sPaint_time;	//time struct
+    sPaint_time.Hour = 12;
+    sPaint_time.Min = 34;
+    sPaint_time.Sec = 56;
+    UWORD num = 10;
+    for (;;) {
+        sPaint_time.Sec = sPaint_time.Sec + 1;
+        if (sPaint_time.Sec == 60) {
+            sPaint_time.Min = sPaint_time.Min + 1;
+            sPaint_time.Sec = 0;
+            if (sPaint_time.Min == 60) {
+                sPaint_time.Hour =  sPaint_time.Hour + 1;
+                sPaint_time.Min = 0;
+                if (sPaint_time.Hour == 24) {
+                    sPaint_time.Hour = 0;
+                    sPaint_time.Min = 0;
+                    sPaint_time.Sec = 0;
+                }
+            }
+        }
+		
+        Paint_ClearWindows(180, 100, 296, 152, WHITE);
+        Paint_DrawTime(180, 110, &sPaint_time, &Font20, WHITE, BLACK);
+
+        //num = num - 1;
+        if(num == 0) {
+            break;
+        }
+		
+	printf("Part refresh...\r\n");
+    EPD_2IN66_Display(BlackImage);
+
+	DEV_Delay_ms(500);
+	}
+	EPD_2IN66_Clear();
+#endif
+	
+    printf("Clear...\r\n");
+	EPD_2IN66_Init();
+	EPD_2IN66_Clear();
+	
+    printf("Goto Sleep...\r\n");
+	EPD_2IN66_Sleep();
+	
+    free(BlackImage);
+    BlackImage = NULL;
+    // close 5V
+    printf("close 5V, Module enters 0 power consumption ...\r\n");
+    DEV_Module_Exit();
+    
+    return 0;
+}
+

Pico_ePaper_Code/c/examples/EPD_2in66b_test.c

@@ -0,0 +1,129 @@
+/*****************************************************************************
+* | File      	:   EPD_2IN66b_test.c
+* | Author      :   Waveshare team
+* | Function    :   2.66inch e-paper b test demo
+* | Info        :
+*----------------
+* |	This version:   V1.0
+* | Date        :   2020-12-02
+* | Info        :
+#
+# Permission is hereby granted, free of charge, to any person obtaining a copy
+# of this software and associated documnetation files (the "Software"), to deal
+# in the Software without restriction, including without limitation the rights
+# to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+# copies of the Software, and to permit persons to  whom the Software is
+# furished to do so, subject to the following conditions:
+#
+# The above copyright notice and this permission notice shall be included in
+# all copies or substantial portions of the Software.
+#
+# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+# FITNESS OR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+# AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+# LIABILITY WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+# OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+# THE SOFTWARE.
+#
+******************************************************************************/
+#include "EPD_Test.h"
+#include "EPD_2in66b.h"
+
+int EPD_2in66b_test(void)
+{
+    printf("EPD_2IN66B_test Demo\r\n");
+    if(DEV_Module_Init()!=0){
+        return -1;
+    }
+
+    printf("e-Paper Init and Clear...\r\n");
+    EPD_2IN66B_Init();
+    EPD_2IN66B_Clear();
+    DEV_Delay_ms(500);
+
+    //Create a new image cache
+    UBYTE *BlackImage, *RedImage;
+    /* you have to edit the startup_stm32fxxx.s file and set a big enough heap size */
+    UWORD Imagesize = ((EPD_2IN66B_WIDTH % 8 == 0)? (EPD_2IN66B_WIDTH / 8 ): (EPD_2IN66B_WIDTH / 8 + 1)) * EPD_2IN66B_HEIGHT;
+    if((BlackImage = (UBYTE *)malloc(Imagesize)) == NULL) {
+        printf("Failed to apply for black memory...\r\n");
+        return -1;
+    }
+    if((RedImage = (UBYTE *)malloc(Imagesize)) == NULL) {
+        printf("Failed to apply for red memory...\r\n");
+        return -1;
+    }
+    printf("Paint_NewImage\r\n");
+    Paint_NewImage(BlackImage, EPD_2IN66B_WIDTH, EPD_2IN66B_HEIGHT, 270, WHITE);
+	Paint_Clear(WHITE);
+	Paint_NewImage(RedImage, EPD_2IN66B_WIDTH, EPD_2IN66B_HEIGHT, 270, WHITE);
+	Paint_Clear(WHITE);
+
+
+#if 1   //show image for array    
+    printf("show image for array\r\n");
+    Paint_SelectImage(BlackImage);
+    Paint_Clear(WHITE);
+    Paint_DrawBitMap(gImage_2in66bb);
+
+	Paint_SelectImage(RedImage);
+    Paint_Clear(WHITE);
+    Paint_DrawBitMap(gImage_2in66br);
+	
+    EPD_2IN66B_Display(BlackImage, RedImage);
+    DEV_Delay_ms(3000);
+#endif
+	
+#if 1   // Drawing on the image
+    printf("Drawing\r\n");
+
+    //1.Draw black image
+    Paint_SelectImage(BlackImage);
+    Paint_Clear(WHITE);
+    Paint_DrawPoint(10, 80, BLACK, DOT_PIXEL_1X1, DOT_STYLE_DFT);
+    Paint_DrawPoint(10, 90, BLACK, DOT_PIXEL_2X2, DOT_STYLE_DFT);
+    Paint_DrawPoint(10, 100, BLACK, DOT_PIXEL_3X3, DOT_STYLE_DFT);
+    Paint_DrawPoint(10, 110, BLACK, DOT_PIXEL_3X3, DOT_STYLE_DFT);
+    Paint_DrawLine(20, 70, 70, 120, BLACK, DOT_PIXEL_1X1, LINE_STYLE_SOLID);
+    Paint_DrawLine(70, 70, 20, 120, BLACK, DOT_PIXEL_1X1, LINE_STYLE_SOLID);
+    Paint_DrawRectangle(20, 70, 70, 120, BLACK, DOT_PIXEL_1X1, DRAW_FILL_EMPTY);
+    Paint_DrawRectangle(80, 70, 130, 120, BLACK, DOT_PIXEL_1X1, DRAW_FILL_FULL);
+    Paint_DrawString_EN(10, 0, "waveshare", &Font16, BLACK, WHITE);
+    Paint_DrawString_CN(130, 20, "΢ѩ<EFBFBD><EFBFBD><EFBFBD><EFBFBD>", &Font24CN, WHITE, BLACK);
+    Paint_DrawNum(10, 50, 987654321, &Font16, WHITE, BLACK);
+
+    //2.Draw red image
+    Paint_SelectImage(RedImage);
+    Paint_Clear(WHITE);
+    Paint_DrawCircle(160, 95, 20, BLACK, DOT_PIXEL_1X1, DRAW_FILL_EMPTY);
+    Paint_DrawCircle(210, 95, 20, BLACK, DOT_PIXEL_1X1, DRAW_FILL_FULL);
+    Paint_DrawLine(85, 95, 125, 95, BLACK, DOT_PIXEL_1X1, LINE_STYLE_DOTTED);
+    Paint_DrawLine(105, 75, 105, 115, BLACK, DOT_PIXEL_1X1, LINE_STYLE_DOTTED);
+    Paint_DrawString_CN(130, 0,"<EFBFBD><EFBFBD><EFBFBD><EFBFBD>abc", &Font12CN, BLACK, WHITE);
+    Paint_DrawString_EN(10, 20, "hello world", &Font12, WHITE, BLACK);
+    Paint_DrawNum(10, 33, 123456789, &Font12, BLACK, WHITE);
+
+    EPD_2IN66B_Display(BlackImage, RedImage);
+    DEV_Delay_ms(3000);
+#endif
+
+    printf("Clear...\r\n");
+    EPD_2IN66B_Clear();
+
+    printf("Goto Sleep...\r\n");
+    EPD_2IN66B_Sleep();
+    free(BlackImage);
+    BlackImage = NULL;
+    free(RedImage);
+    RedImage = NULL;
+	
+    DEV_Delay_ms(2000);//important, at least 2s
+    // close 5V
+    printf("close 5V, Module enters 0 power consumption ...\r\n");
+    DEV_Module_Exit();
+
+    return 0;
+}
+
+

Pico_ePaper_Code/c/examples/EPD_2in7_V2_test.c

@@ -0,0 +1,325 @@
+/*****************************************************************************
+* | File      	:   EPD_2in7_V2.c
+* | Author      :   Waveshare team
+* | Function    :   2.7inch V2 e-paper
+* | Info        :
+*----------------
+* |	This version:   V1.0
+* | Date        :   2022-08-18
+* | Info        :
+* -----------------------------------------------------------------------------
+#
+# Permission is hereby granted, free of charge, to any person obtaining a copy
+# of this software and associated documnetation files (the "Software"), to deal
+# in the Software without restriction, including without limitation the rights
+# to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+# copies of the Software, and to permit persons to  whom the Software is
+# furished to do so, subject to the following conditions:
+#
+# The above copyright notice and this permission notice shall be included in
+# all copies or substantial portions of the Software.
+#
+# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+# FITNESS OR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+# AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+# LIABILITY WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+# OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+# THE SOFTWARE.
+#
+******************************************************************************/
+#include "EPD_Test.h"
+#include "EPD_2in7_V2.h"
+
+int EPD_2in7_V2_test(void)
+{
+    printf("EPD_2IN7_V2_test Demo\r\n");
+    if(DEV_Module_Init()!=0){
+        return -1;
+    }
+
+    printf("e-Paper Init and Clear...\r\n");
+	EPD_2IN7_V2_Init();
+    EPD_2IN7_V2_Clear();
+
+
+    //Create a new image cache
+    UBYTE *BlackImage;
+    UWORD Imagesize = ((EPD_2IN7_V2_WIDTH % 8 == 0)? (EPD_2IN7_V2_WIDTH / 8 ): (EPD_2IN7_V2_WIDTH / 8 + 1)) * EPD_2IN7_V2_HEIGHT;
+    if((BlackImage = (UBYTE *)malloc(Imagesize)) == NULL) {
+        printf("Failed to apply for black memory...\r\n");
+        return -1;
+    }
+    printf("Paint_NewImage\r\n");
+    Paint_NewImage(BlackImage, EPD_2IN7_V2_WIDTH, EPD_2IN7_V2_HEIGHT, 90, WHITE);
+	Paint_Clear(WHITE);
+	
+#if 1   // show bmp
+    printf("show image for array\r\n");
+    Paint_SelectImage(BlackImage);
+    Paint_Clear(WHITE);
+    Paint_DrawBitMap(gImage_2in7);
+    EPD_2IN7_V2_Display(BlackImage);
+    DEV_Delay_ms(500);
+
+#endif
+
+#if 1  // Drawing on the image
+	Paint_NewImage(BlackImage, EPD_2IN7_V2_WIDTH, EPD_2IN7_V2_HEIGHT, 90, WHITE);  	
+    printf("Drawing\r\n");
+    //1.Select Image
+    Paint_SelectImage(BlackImage);
+    Paint_Clear(WHITE);
+	
+    // 2.Drawing on the image
+    printf("Drawing:BlackImage\r\n");
+    Paint_DrawPoint(10, 80, BLACK, DOT_PIXEL_1X1, DOT_STYLE_DFT);
+    Paint_DrawPoint(10, 90, BLACK, DOT_PIXEL_2X2, DOT_STYLE_DFT);
+    Paint_DrawPoint(10, 100, BLACK, DOT_PIXEL_3X3, DOT_STYLE_DFT);
+
+    Paint_DrawLine(20, 70, 70, 120, BLACK, DOT_PIXEL_1X1, LINE_STYLE_SOLID);
+    Paint_DrawLine(70, 70, 20, 120, BLACK, DOT_PIXEL_1X1, LINE_STYLE_SOLID);
+
+    Paint_DrawRectangle(20, 70, 70, 120, BLACK, DOT_PIXEL_1X1, DRAW_FILL_EMPTY);
+    Paint_DrawRectangle(80, 70, 130, 120, BLACK, DOT_PIXEL_1X1, DRAW_FILL_FULL);
+
+    Paint_DrawCircle(45, 95, 20, BLACK, DOT_PIXEL_1X1, DRAW_FILL_EMPTY);
+    Paint_DrawCircle(105, 95, 20, WHITE, DOT_PIXEL_1X1, DRAW_FILL_FULL);
+
+    Paint_DrawLine(85, 95, 125, 95, BLACK, DOT_PIXEL_1X1, LINE_STYLE_DOTTED);
+    Paint_DrawLine(105, 75, 105, 115, BLACK, DOT_PIXEL_1X1, LINE_STYLE_DOTTED);
+
+    Paint_DrawString_EN(10, 0, "waveshare", &Font16, BLACK, WHITE);
+    Paint_DrawString_EN(10, 20, "hello world", &Font12, WHITE, BLACK);
+
+    Paint_DrawNum(10, 33, 123456789, &Font12, BLACK, WHITE);
+    Paint_DrawNum(10, 50, 987654321, &Font16, WHITE, BLACK);
+
+    Paint_DrawString_CN(130, 0,"<EFBFBD><EFBFBD><EFBFBD><EFBFBD>abc", &Font12CN, BLACK, WHITE);
+    Paint_DrawString_CN(130, 20, "΢ѩ<EFBFBD><EFBFBD><EFBFBD><EFBFBD>", &Font24CN, WHITE, BLACK);
+
+    EPD_2IN7_V2_Display_Base(BlackImage);
+    DEV_Delay_ms(3000);
+#endif
+
+#if 1  // Fast Drawing on the image
+    // Fast refresh
+    printf("This is followed by a quick refresh demo\r\n");
+    printf("First, clear the screen\r\n");
+    EPD_2IN7_V2_Init();
+    EPD_2IN7_V2_Clear();
+
+    printf("e-Paper Init Fast\r\n");
+    EPD_2IN7_V2_Init_Fast();
+	Paint_NewImage(BlackImage, EPD_2IN7_V2_WIDTH, EPD_2IN7_V2_HEIGHT, 90, WHITE);  	
+    printf("Drawing\r\n");
+    //1.Select Image
+    Paint_SelectImage(BlackImage);
+    Paint_Clear(WHITE);
+
+    printf("show window BMP-----------------\r\n");
+    Paint_SelectImage(BlackImage);
+    Paint_Clear(WHITE);
+    Paint_DrawBitMap(gImage_2in7);
+    EPD_2IN7_V2_Display_Fast(BlackImage);
+    DEV_Delay_ms(500);
+
+    // 2.Drawing on the image
+    Paint_Clear(WHITE);
+    printf("Drawing:BlackImage\r\n");
+    Paint_DrawPoint(10, 80, BLACK, DOT_PIXEL_1X1, DOT_STYLE_DFT);
+    Paint_DrawPoint(10, 90, BLACK, DOT_PIXEL_2X2, DOT_STYLE_DFT);
+    Paint_DrawPoint(10, 100, BLACK, DOT_PIXEL_3X3, DOT_STYLE_DFT);
+
+    Paint_DrawLine(20, 70, 70, 120, BLACK, DOT_PIXEL_1X1, LINE_STYLE_SOLID);
+    Paint_DrawLine(70, 70, 20, 120, BLACK, DOT_PIXEL_1X1, LINE_STYLE_SOLID);
+
+    Paint_DrawRectangle(20, 70, 70, 120, BLACK, DOT_PIXEL_1X1, DRAW_FILL_EMPTY);
+    Paint_DrawRectangle(80, 70, 130, 120, BLACK, DOT_PIXEL_1X1, DRAW_FILL_FULL);
+
+    Paint_DrawCircle(45, 95, 20, BLACK, DOT_PIXEL_1X1, DRAW_FILL_EMPTY);
+    Paint_DrawCircle(105, 95, 20, WHITE, DOT_PIXEL_1X1, DRAW_FILL_FULL);
+
+    Paint_DrawLine(85, 95, 125, 95, BLACK, DOT_PIXEL_1X1, LINE_STYLE_DOTTED);
+    Paint_DrawLine(105, 75, 105, 115, BLACK, DOT_PIXEL_1X1, LINE_STYLE_DOTTED);
+
+    Paint_DrawString_EN(10, 0, "waveshare", &Font16, BLACK, WHITE);
+    Paint_DrawString_EN(10, 20, "hello world", &Font12, WHITE, BLACK);
+
+    Paint_DrawNum(10, 33, 123456789, &Font12, BLACK, WHITE);
+    Paint_DrawNum(10, 50, 987654321, &Font16, WHITE, BLACK);
+
+    Paint_DrawString_CN(130, 0,"<EFBFBD><EFBFBD><EFBFBD><EFBFBD>abc", &Font12CN, BLACK, WHITE);
+    Paint_DrawString_CN(130, 20, "΢ѩ<EFBFBD><EFBFBD><EFBFBD><EFBFBD>", &Font24CN, WHITE, BLACK);
+
+    EPD_2IN7_V2_Display_Fast(BlackImage);
+    DEV_Delay_ms(3000);
+
+    
+
+#endif
+
+#if 1   //Partial refresh, example shows time    	
+    // If you didn't use the EPD_2IN7_V2_Display_Base() function to refresh the image before,
+    // use the EPD_2IN7_V2_Display_Base_color() function to refresh the background color, 
+    // otherwise the background color will be garbled 
+    EPD_2IN7_V2_Init();
+    // EPD_2IN7_V2_Display_Base_color(WHITE);
+	Paint_NewImage(BlackImage, 50, 120, 90, WHITE);
+    
+    printf("Partial refresh\r\n");
+    Paint_SelectImage(BlackImage);
+	Paint_SetScale(2);
+    Paint_Clear(WHITE);
+    
+    PAINT_TIME sPaint_time;
+    sPaint_time.Hour = 12;
+    sPaint_time.Min = 34;
+    sPaint_time.Sec = 56;
+    UBYTE num = 15;
+    for (;;) {
+        sPaint_time.Sec = sPaint_time.Sec + 1;
+        if (sPaint_time.Sec == 60) {
+            sPaint_time.Min = sPaint_time.Min + 1;
+            sPaint_time.Sec = 0;
+            if (sPaint_time.Min == 60) {
+                sPaint_time.Hour =  sPaint_time.Hour + 1;
+                sPaint_time.Min = 0;
+                if (sPaint_time.Hour == 24) {
+                    sPaint_time.Hour = 0;
+                    sPaint_time.Min = 0;
+                    sPaint_time.Sec = 0;
+                }
+            }
+        }
+        
+        Paint_Clear(WHITE);
+		Paint_DrawRectangle(1, 1, 120, 50, BLACK, DOT_PIXEL_1X1, DRAW_FILL_EMPTY);
+        Paint_DrawTime(10, 15, &sPaint_time, &Font20, WHITE, BLACK);
+
+        num = num - 1;
+        if(num == 0) {
+            break;
+        }
+		printf("Part refresh...\r\n");
+        EPD_2IN7_V2_Display_Partial(BlackImage, 60, 134, 110, 254); // Xstart must be a multiple of 8
+        DEV_Delay_ms(500);
+    }
+#endif
+
+#if 1 // show image for array
+    free(BlackImage);
+    printf("show Gray------------------------\r\n");
+    Imagesize = ((EPD_2IN7_V2_WIDTH % 4 == 0)? (EPD_2IN7_V2_WIDTH / 4 ): (EPD_2IN7_V2_WIDTH / 4 + 1)) * EPD_2IN7_V2_HEIGHT;
+    if((BlackImage = (UBYTE *)malloc(Imagesize)) == NULL) {
+        printf("Failed to apply for black memory...\r\n");
+        return -1;
+    }
+    EPD_2IN7_V2_Init_4GRAY();
+    printf("4 grayscale display\r\n");
+    Paint_NewImage(BlackImage, EPD_2IN7_V2_WIDTH, EPD_2IN7_V2_HEIGHT, 90, WHITE);
+    Paint_SetScale(4);
+    Paint_Clear(0xff);
+    
+    Paint_DrawPoint(10, 80, GRAY4, DOT_PIXEL_1X1, DOT_STYLE_DFT);
+    Paint_DrawPoint(10, 90, GRAY4, DOT_PIXEL_2X2, DOT_STYLE_DFT);
+    Paint_DrawPoint(10, 100, GRAY4, DOT_PIXEL_3X3, DOT_STYLE_DFT);
+    Paint_DrawLine(20, 70, 70, 120, GRAY4, DOT_PIXEL_1X1, LINE_STYLE_SOLID);
+    Paint_DrawLine(70, 70, 20, 120, GRAY4, DOT_PIXEL_1X1, LINE_STYLE_SOLID);
+    Paint_DrawRectangle(20, 70, 70, 120, GRAY4, DOT_PIXEL_1X1, DRAW_FILL_EMPTY);
+    Paint_DrawRectangle(80, 70, 130, 120, GRAY4, DOT_PIXEL_1X1, DRAW_FILL_FULL);
+    Paint_DrawCircle(45, 95, 20, GRAY4, DOT_PIXEL_1X1, DRAW_FILL_EMPTY);
+    Paint_DrawCircle(105, 95, 20, GRAY2, DOT_PIXEL_1X1, DRAW_FILL_FULL);
+    Paint_DrawLine(85, 95, 125, 95, GRAY4, DOT_PIXEL_1X1, LINE_STYLE_DOTTED);
+    Paint_DrawLine(105, 75, 105, 115, GRAY4, DOT_PIXEL_1X1, LINE_STYLE_DOTTED);
+    Paint_DrawString_EN(10, 0, "waveshare", &Font16, GRAY4, GRAY1);
+    Paint_DrawString_EN(10, 20, "hello world", &Font12, GRAY3, GRAY1);
+    Paint_DrawNum(10, 33, 123456789, &Font12, GRAY4, GRAY2);
+    Paint_DrawNum(10, 50, 987654321, &Font16, GRAY1, GRAY4);
+     Paint_DrawString_CN(150, 0,"<EFBFBD><EFBFBD><EFBFBD><EFBFBD>abc", &Font12CN, GRAY4, GRAY1);
+    Paint_DrawString_CN(150, 20,"<EFBFBD><EFBFBD><EFBFBD><EFBFBD>abc", &Font12CN, GRAY3, GRAY2);
+    Paint_DrawString_CN(150, 40,"<EFBFBD><EFBFBD><EFBFBD><EFBFBD>abc", &Font12CN, GRAY2, GRAY3);
+    Paint_DrawString_CN(150, 60,"<EFBFBD><EFBFBD><EFBFBD><EFBFBD>abc", &Font12CN, GRAY1, GRAY4);
+    Paint_DrawString_CN(10, 130, "΢ѩ<EFBFBD><EFBFBD><EFBFBD><EFBFBD>", &Font24CN, GRAY1, GRAY4);
+    EPD_2IN7_V2_4GrayDisplay(BlackImage);
+    DEV_Delay_ms(3000);
+
+    Paint_NewImage(BlackImage, EPD_2IN7_V2_WIDTH, EPD_2IN7_V2_HEIGHT, 0, WHITE);
+    Paint_SetScale(4);
+    Paint_Clear(WHITE);
+    EPD_2IN7_V2_4GrayDisplay(gImage_2in7_4Gray);
+    DEV_Delay_ms(3000);
+
+#endif
+
+#if 1
+
+    EPD_2IN7_V2_Init();
+    EPD_2IN7_V2_Clear();
+    printf("Goto Sleep...\r\n");
+    EPD_2IN7_V2_Sleep();
+
+    int key=0; 
+
+    gpio_set_dir(KEY0, GPIO_IN);
+    gpio_pull_up(KEY0);//Need to pull up
+
+    gpio_set_dir(KEY1, GPIO_IN);
+    gpio_pull_up(KEY1);//Need to pull up
+
+    gpio_set_dir(KEY2, GPIO_IN);
+    gpio_pull_up(KEY2);//Need to pull up
+    while(1)
+    {
+        if(DEV_Digital_Read(KEY0 ) == 0 && key==0)
+        {
+            key=1;
+            EPD_2IN7_V2_Init();
+            Paint_DrawBitMap(gImage_2in7);
+            EPD_2IN7_V2_Display(BlackImage);
+            DEV_Delay_ms(3000);
+        }
+
+        if(DEV_Digital_Read(KEY1 ) == 0 && key==0)
+        {
+            key=1;
+            EPD_2IN7_V2_Init_4GRAY();
+            EPD_2IN7_V2_4GrayDisplay(gImage_2in7_4Gray);
+            DEV_Delay_ms(3000);
+        }
+
+        if(DEV_Digital_Read(KEY2 ) == 0 && key==0)
+        {
+            key=1;
+            EPD_2IN7_V2_Init_4GRAY();
+            EPD_2IN7_V2_4GrayDisplay(gImage_2in7_4Gray_1);
+            DEV_Delay_ms(3000);
+        }
+
+        if(DEV_Digital_Read(KEY0 ) == 1&&DEV_Digital_Read(KEY1 ) == 1&&DEV_Digital_Read(KEY2 ) == 1 && key == 1 )
+        {
+            key=0;
+            EPD_2IN7_V2_Init();
+            EPD_2IN7_V2_Clear();
+            printf("Goto Sleep...\r\n");
+            EPD_2IN7_V2_Sleep();
+        }
+            
+    }
+
+#endif
+
+	printf("Clear...\r\n");
+	EPD_2IN7_V2_Init();
+    EPD_2IN7_V2_Clear();
+	
+    printf("Goto Sleep...\r\n");
+    EPD_2IN7_V2_Sleep();
+    free(BlackImage);
+    BlackImage = NULL;
+    DEV_Delay_ms(2000);//important, at least 2s
+    // close 5V
+    printf("close 5V, Module enters 0 power consumption ...\r\n");
+    DEV_Module_Exit();
+    return 0;
+}

Pico_ePaper_Code/c/examples/EPD_2in7_test.c

@@ -0,0 +1,206 @@
+/*****************************************************************************
+* | File      	:   EPD_2IN7_test.c
+* | Author      :   Waveshare team
+* | Function    :   2.9inch e-paper V2 test demo
+* | Info        :
+*----------------
+* |	This version:   V1.0
+* | Date        :   2021-06-03
+* | Info        :
+#
+# Permission is hereby granted, free of charge, to any person obtaining a copy
+# of this software and associated documnetation files (the "Software"), to deal
+# in the Software without restriction, including without limitation the rights
+# to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+# copies of the Software, and to permit persons to  whom the Software is
+# furished to do so, subject to the following conditions:
+#
+# The above copyright notice and this permission notice shall be included in
+# all copies or substantial portions of the Software.
+#
+# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+# FITNESS OR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+# AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+# LIABILITY WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+# OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+# THE SOFTWARE.
+#
+******************************************************************************/
+#include "EPD_Test.h"
+#include "EPD_2in7.h"
+
+int EPD_2in7_test(void)
+{
+    printf("EPD_2IN7_test Demo\r\n");
+    DEV_Module_Init();
+
+    printf("e-Paper Init and Clear...\r\n");
+    EPD_2IN7_Init();
+    EPD_2IN7_Clear();
+    DEV_Delay_ms(500);
+
+    //Create a new image cache
+    UBYTE *BlackImage;
+    /* you have to edit the startup_stm32fxxx.s file and set a big enough heap size */
+    UWORD Imagesize = ((EPD_2IN7_WIDTH % 8 == 0)? (EPD_2IN7_WIDTH / 8 ): (EPD_2IN7_WIDTH / 8 + 1)) * EPD_2IN7_HEIGHT;
+    if((BlackImage = (UBYTE *)malloc(Imagesize)) == NULL) {
+        printf("Failed to apply for black memory...\r\n");
+        return -1;
+    }
+    printf("Paint_NewImage\r\n");
+    Paint_NewImage(BlackImage, EPD_2IN7_WIDTH, EPD_2IN7_HEIGHT, 270, WHITE);
+
+#if 0   // show image for array   
+    printf("show image for array\r\n");
+    Paint_SelectImage(BlackImage);
+    Paint_Clear(WHITE);
+    Paint_DrawBitMap(gImage_2in7);
+    EPD_2IN7_Display(BlackImage);
+    DEV_Delay_ms(500);
+#endif
+
+#if 1   // Drawing on the image
+    //1.Select Image
+    printf("SelectImage:BlackImage\r\n");
+    Paint_SelectImage(BlackImage);
+    Paint_Clear(WHITE);
+
+    // 2.Drawing on the image
+    printf("Drawing:BlackImage\r\n");
+    Paint_DrawPoint(10, 80, BLACK, DOT_PIXEL_1X1, DOT_STYLE_DFT);
+    Paint_DrawPoint(10, 90, BLACK, DOT_PIXEL_2X2, DOT_STYLE_DFT);
+    Paint_DrawPoint(10, 100, BLACK, DOT_PIXEL_3X3, DOT_STYLE_DFT);
+    Paint_DrawLine(20, 70, 70, 120, BLACK, DOT_PIXEL_1X1, LINE_STYLE_SOLID);
+    Paint_DrawLine(70, 70, 20, 120, BLACK, DOT_PIXEL_1X1, LINE_STYLE_SOLID);
+    Paint_DrawRectangle(20, 70, 70, 120, BLACK, DOT_PIXEL_1X1, DRAW_FILL_EMPTY);
+    Paint_DrawRectangle(80, 70, 130, 120, BLACK, DOT_PIXEL_1X1, DRAW_FILL_FULL);
+    Paint_DrawCircle(45, 95, 20, BLACK, DOT_PIXEL_1X1, DRAW_FILL_EMPTY);
+    Paint_DrawCircle(105, 95, 20, WHITE, DOT_PIXEL_1X1, DRAW_FILL_FULL);
+    Paint_DrawLine(85, 95, 125, 95, BLACK, DOT_PIXEL_1X1, LINE_STYLE_DOTTED);
+    Paint_DrawLine(105, 75, 105, 115, BLACK, DOT_PIXEL_1X1, LINE_STYLE_DOTTED);
+    Paint_DrawString_EN(10, 0, "waveshare", &Font16, BLACK, WHITE);
+    Paint_DrawString_EN(10, 20, "hello world", &Font12, WHITE, BLACK);
+    Paint_DrawNum(10, 33, 123456789, &Font12, BLACK, WHITE);
+    Paint_DrawNum(10, 50, 987654321, &Font16, WHITE, BLACK);
+    Paint_DrawString_CN(130, 0,"<EFBFBD><EFBFBD><EFBFBD><EFBFBD>abc", &Font12CN, BLACK, WHITE);
+    Paint_DrawString_CN(130, 20, "΢ѩ<EFBFBD><EFBFBD><EFBFBD><EFBFBD>", &Font24CN, WHITE, BLACK);
+
+    printf("EPD_Display\r\n");
+    EPD_2IN7_Display(BlackImage);
+    DEV_Delay_ms(2000);
+#endif
+		free(BlackImage);
+#if 1 // show image for array
+    printf("show Gray------------------------\r\n");
+    Imagesize = ((EPD_2IN7_WIDTH % 4 == 0)? (EPD_2IN7_WIDTH / 4 ): (EPD_2IN7_WIDTH / 4 + 1)) * EPD_2IN7_HEIGHT;
+    if((BlackImage = (UBYTE *)malloc(Imagesize)) == NULL) {
+        printf("Failed to apply for black memory...\r\n");
+        return -1;
+    }
+    printf("4 grayscale display\r\n");
+    EPD_2IN7_Init_4Gray();
+    Paint_NewImage(BlackImage, EPD_2IN7_WIDTH, EPD_2IN7_HEIGHT, 270, WHITE);
+    Paint_SetScale(4);
+    Paint_Clear(WHITE);
+    
+    Paint_DrawPoint(10, 80, GRAY4, DOT_PIXEL_1X1, DOT_STYLE_DFT);
+    Paint_DrawPoint(10, 90, GRAY4, DOT_PIXEL_2X2, DOT_STYLE_DFT);
+    Paint_DrawPoint(10, 100, GRAY4, DOT_PIXEL_3X3, DOT_STYLE_DFT);
+    Paint_DrawLine(20, 70, 70, 120, GRAY4, DOT_PIXEL_1X1, LINE_STYLE_SOLID);
+    Paint_DrawLine(70, 70, 20, 120, GRAY4, DOT_PIXEL_1X1, LINE_STYLE_SOLID);
+    Paint_DrawRectangle(20, 70, 70, 120, GRAY4, DOT_PIXEL_1X1, DRAW_FILL_EMPTY);
+    Paint_DrawRectangle(80, 70, 130, 120, GRAY4, DOT_PIXEL_1X1, DRAW_FILL_FULL);
+    Paint_DrawCircle(45, 95, 20, GRAY4, DOT_PIXEL_1X1, DRAW_FILL_EMPTY);
+    Paint_DrawCircle(105, 95, 20, GRAY2, DOT_PIXEL_1X1, DRAW_FILL_FULL);
+    Paint_DrawLine(85, 95, 125, 95, GRAY4, DOT_PIXEL_1X1, LINE_STYLE_DOTTED);
+    Paint_DrawLine(105, 75, 105, 115, GRAY4, DOT_PIXEL_1X1, LINE_STYLE_DOTTED);
+    Paint_DrawString_EN(10, 0, "waveshare", &Font16, GRAY4, GRAY1);
+    Paint_DrawString_EN(10, 20, "hello world", &Font12, GRAY3, GRAY1);
+    Paint_DrawNum(10, 33, 123456789, &Font12, GRAY4, GRAY2);
+    Paint_DrawNum(10, 50, 987654321, &Font16, GRAY1, GRAY4);
+    Paint_DrawString_CN(150, 0,"<EFBFBD><EFBFBD><EFBFBD><EFBFBD>abc", &Font12CN, GRAY4, GRAY1);
+    Paint_DrawString_CN(150, 20,"<EFBFBD><EFBFBD><EFBFBD><EFBFBD>abc", &Font12CN, GRAY3, GRAY2);
+    Paint_DrawString_CN(150, 40,"<EFBFBD><EFBFBD><EFBFBD><EFBFBD>abc", &Font12CN, GRAY2, GRAY3);
+    Paint_DrawString_CN(150, 60,"<EFBFBD><EFBFBD><EFBFBD><EFBFBD>abc", &Font12CN, GRAY1, GRAY4);
+    Paint_DrawString_CN(10, 130, "΢ѩ<EFBFBD><EFBFBD><EFBFBD><EFBFBD>", &Font24CN, GRAY1, GRAY4);
+    EPD_2IN7_4GrayDisplay(BlackImage);
+    DEV_Delay_ms(3000);
+    /*
+    EPD_2IN7_4GrayDisplay(gImage_2in7_4Gray);
+    DEV_Delay_ms(3000);*/
+#endif
+    
+
+#if 1 
+
+    EPD_2IN7_Init();
+    EPD_2IN7_Clear();
+    printf("Goto Sleep...\r\n");
+    EPD_2IN7_Sleep();
+
+    int key=0; 
+
+    gpio_set_dir(KEY0, GPIO_IN);
+    gpio_pull_up(KEY0);//Need to pull up
+
+    gpio_set_dir(KEY1, GPIO_IN);
+    gpio_pull_up(KEY1);//Need to pull up
+
+    gpio_set_dir(KEY2, GPIO_IN);
+    gpio_pull_up(KEY2);//Need to pull up
+    while(1)
+    {
+        if(DEV_Digital_Read(KEY0 ) == 0 && key==0)
+        {
+            key=1;
+            EPD_2IN7_Init();
+            Paint_DrawBitMap(gImage_2in7);
+            EPD_2IN7_Display(BlackImage);
+            DEV_Delay_ms(3000);
+        }
+
+        if(DEV_Digital_Read(KEY1 ) == 0 && key==0)
+        {
+            key=1;
+            EPD_2IN7_Init_4Gray();
+            EPD_2IN7_4GrayDisplay(gImage_2in7_4Gray);
+            DEV_Delay_ms(3000);
+        }
+
+        if(DEV_Digital_Read(KEY2 ) == 0 && key==0)
+        {
+            key=1;
+            EPD_2IN7_Init_4Gray();
+            EPD_2IN7_4GrayDisplay(gImage_2in7_4Gray_1);
+            DEV_Delay_ms(3000);
+        }
+
+        if(DEV_Digital_Read(KEY0 ) == 1&&DEV_Digital_Read(KEY1 ) == 1&&DEV_Digital_Read(KEY2 ) == 1 && key == 1 )
+        {
+            key=0;
+            EPD_2IN7_Init();
+            EPD_2IN7_Clear();
+            printf("Goto Sleep...\r\n");
+            EPD_2IN7_Sleep();
+        }
+            
+    }
+
+#endif
+
+    EPD_2IN7_Init();
+    printf("Clear...\r\n");
+    EPD_2IN7_Clear();
+
+    printf("Goto Sleep...\r\n");
+    EPD_2IN7_Sleep();
+    free(BlackImage);
+    BlackImage = NULL;
+
+    // close 5V
+    printf("close 5V, Module enters 0 power consumption ...\r\n");
+    DEV_Module_Exit();
+    
+    return 0;
+}

Pico_ePaper_Code/c/examples/EPD_2in9_V2_test.c

@@ -0,0 +1,204 @@
+/*****************************************************************************
+* | File      	:   EPD_2IN9_V2_test.c
+* | Author      :   Waveshare team
+* | Function    :   2.9inch e-paper V2 test demo
+* | Info        :
+*----------------
+* |	This version:   V1.0
+* | Date        :   2020-10-20
+* | Info        :
+#
+# Permission is hereby granted, free of charge, to any person obtaining a copy
+# of this software and associated documnetation files (the "Software"), to deal
+# in the Software without restriction, including without limitation the rights
+# to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+# copies of the Software, and to permit persons to  whom the Software is
+# furished to do so, subject to the following conditions:
+#
+# The above copyright notice and this permission notice shall be included in
+# all copies or substantial portions of the Software.
+#
+# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+# FITNESS OR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+# AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+# LIABILITY WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+# OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+# THE SOFTWARE.
+#
+******************************************************************************/
+#include "EPD_Test.h"
+#include "EPD_2in9_V2.h"
+
+int EPD_2in9_V2_test(void)
+{
+    printf("EPD_2IN9_V2_test Demo\r\n");
+    if(DEV_Module_Init()!=0){
+        return -1;
+    }
+
+    printf("e-Paper Init and Clear...\r\n");
+	EPD_2IN9_V2_Init();
+    EPD_2IN9_V2_Clear();
+
+    //Create a new image cache
+    UBYTE *BlackImage;
+    // Additional `*2` on the end to account for four-colour images
+    UWORD Imagesize = ((EPD_2IN9_V2_WIDTH % 8 == 0)? (EPD_2IN9_V2_WIDTH / 8 ): (EPD_2IN9_V2_WIDTH / 8 + 1)) * EPD_2IN9_V2_HEIGHT * 2;
+    if((BlackImage = (UBYTE *)malloc(Imagesize)) == NULL) {
+        printf("Failed to apply for black memory...\r\n");
+        return -1;
+    }
+    printf("Paint_NewImage\r\n");
+    Paint_NewImage(BlackImage, EPD_2IN9_V2_WIDTH, EPD_2IN9_V2_HEIGHT, 90, WHITE);
+    Paint_SetScale(2); // b&w
+	Paint_Clear(WHITE);
+
+#if 1  //show image for array  
+    Paint_NewImage(BlackImage, EPD_2IN9_V2_WIDTH, EPD_2IN9_V2_HEIGHT, 90, WHITE);
+    Paint_SetScale(2); // b&w
+    printf("show image for array\r\n");
+    Paint_SelectImage(BlackImage);
+    Paint_Clear(WHITE);
+    Paint_DrawBitMap(gImage_2in9);
+
+    EPD_2IN9_V2_Display(BlackImage);
+    DEV_Delay_ms(3000);
+#endif
+
+#if 1  // Drawing on the image
+	Paint_NewImage(BlackImage, EPD_2IN9_V2_WIDTH, EPD_2IN9_V2_HEIGHT, 90, WHITE);
+    Paint_SetScale(2); // b&w
+    printf("Drawing\r\n");
+    //1.Select Image
+    Paint_SelectImage(BlackImage);
+    Paint_Clear(WHITE);
+	
+    // 2.Drawing on the image
+    printf("Drawing:BlackImage\r\n");
+    Paint_DrawPoint(10, 80, BLACK, DOT_PIXEL_1X1, DOT_STYLE_DFT);
+    Paint_DrawPoint(10, 90, BLACK, DOT_PIXEL_2X2, DOT_STYLE_DFT);
+    Paint_DrawPoint(10, 100, BLACK, DOT_PIXEL_3X3, DOT_STYLE_DFT);
+
+    Paint_DrawLine(20, 70, 70, 120, BLACK, DOT_PIXEL_1X1, LINE_STYLE_SOLID);
+    Paint_DrawLine(70, 70, 20, 120, BLACK, DOT_PIXEL_1X1, LINE_STYLE_SOLID);
+
+    Paint_DrawRectangle(20, 70, 70, 120, BLACK, DOT_PIXEL_1X1, DRAW_FILL_EMPTY);
+    Paint_DrawRectangle(80, 70, 130, 120, BLACK, DOT_PIXEL_1X1, DRAW_FILL_FULL);
+
+    Paint_DrawCircle(45, 95, 20, BLACK, DOT_PIXEL_1X1, DRAW_FILL_EMPTY);
+    Paint_DrawCircle(105, 95, 20, WHITE, DOT_PIXEL_1X1, DRAW_FILL_FULL);
+
+    Paint_DrawLine(85, 95, 125, 95, BLACK, DOT_PIXEL_1X1, LINE_STYLE_DOTTED);
+    Paint_DrawLine(105, 75, 105, 115, BLACK, DOT_PIXEL_1X1, LINE_STYLE_DOTTED);
+
+    Paint_DrawString_EN(10, 0, "waveshare", &Font16, BLACK, WHITE);
+    Paint_DrawString_EN(10, 20, "hello world", &Font12, WHITE, BLACK);
+
+    Paint_DrawNum(10, 33, 123456789, &Font12, BLACK, WHITE);
+    Paint_DrawNum(10, 50, 987654321, &Font16, WHITE, BLACK);
+
+    Paint_DrawString_CN(130, 0,"<EFBFBD><EFBFBD><EFBFBD><EFBFBD>abc", &Font12CN, BLACK, WHITE);
+    Paint_DrawString_CN(130, 20, "΢ѩ<EFBFBD><EFBFBD><EFBFBD><EFBFBD>", &Font24CN, WHITE, BLACK);
+
+    EPD_2IN9_V2_Display_Base(BlackImage);
+    DEV_Delay_ms(3000);
+#endif
+
+#if 1   //Partial refresh, example shows time    		
+	Paint_NewImage(BlackImage, EPD_2IN9_V2_WIDTH, EPD_2IN9_V2_HEIGHT, 90, WHITE);  
+    printf("Partial refresh\r\n");
+    Paint_SelectImage(BlackImage);
+	
+    PAINT_TIME sPaint_time;
+    sPaint_time.Hour = 12;
+    sPaint_time.Min = 34;
+    sPaint_time.Sec = 56;
+    UBYTE num = 10;
+    for (;;) {
+        sPaint_time.Sec = sPaint_time.Sec + 1;
+        if (sPaint_time.Sec == 60) {
+            sPaint_time.Min = sPaint_time.Min + 1;
+            sPaint_time.Sec = 0;
+            if (sPaint_time.Min == 60) {
+                sPaint_time.Hour =  sPaint_time.Hour + 1;
+                sPaint_time.Min = 0;
+                if (sPaint_time.Hour == 24) {
+                    sPaint_time.Hour = 0;
+                    sPaint_time.Min = 0;
+                    sPaint_time.Sec = 0;
+                }
+            }
+        }
+        Paint_ClearWindows(150, 80, 150 + Font20.Width * 7, 80 + Font20.Height, WHITE);
+        Paint_DrawTime(150, 80, &sPaint_time, &Font20, WHITE, BLACK);
+
+        num = num - 1;
+        if(num == 0) {
+            break;
+        }
+		EPD_2IN9_V2_Display_Partial(BlackImage);
+        DEV_Delay_ms(500);//Analog clock 1s
+    }
+#endif
+
+#if 1 //show 4colour image for array
+    free(BlackImage);
+    printf("show Gray------------------------\r\n");
+    Imagesize = ((EPD_2IN9_V2_WIDTH % 4 == 0)? (EPD_2IN9_V2_WIDTH / 4 ): (EPD_2IN9_V2_WIDTH / 4 + 1)) * EPD_2IN9_V2_HEIGHT;
+    if((BlackImage = (UBYTE *)malloc(Imagesize)) == NULL) {
+        printf("Failed to apply for black memory...\r\n");
+        return -1;
+    }
+    EPD_2IN9_V2_Gray4_Init();
+    printf("4 grayscale display\r\n");
+    Paint_NewImage(BlackImage, EPD_2IN9_V2_WIDTH, EPD_2IN9_V2_HEIGHT, 90, WHITE);
+    Paint_SetScale(4);
+    Paint_Clear(0xff);
+    
+    Paint_DrawPoint(10, 80, GRAY4, DOT_PIXEL_1X1, DOT_STYLE_DFT);
+    Paint_DrawPoint(10, 90, GRAY4, DOT_PIXEL_2X2, DOT_STYLE_DFT);
+    Paint_DrawPoint(10, 100, GRAY4, DOT_PIXEL_3X3, DOT_STYLE_DFT);
+    Paint_DrawLine(20, 70, 70, 120, GRAY4, DOT_PIXEL_1X1, LINE_STYLE_SOLID);
+    Paint_DrawLine(70, 70, 20, 120, GRAY4, DOT_PIXEL_1X1, LINE_STYLE_SOLID);
+    Paint_DrawRectangle(20, 70, 70, 120, GRAY4, DOT_PIXEL_1X1, DRAW_FILL_EMPTY);
+    Paint_DrawRectangle(80, 70, 130, 120, GRAY4, DOT_PIXEL_1X1, DRAW_FILL_FULL);
+    Paint_DrawCircle(45, 95, 20, GRAY4, DOT_PIXEL_1X1, DRAW_FILL_EMPTY);
+    Paint_DrawCircle(105, 95, 20, GRAY2, DOT_PIXEL_1X1, DRAW_FILL_FULL);
+    Paint_DrawLine(85, 95, 125, 95, GRAY4, DOT_PIXEL_1X1, LINE_STYLE_DOTTED);
+    Paint_DrawLine(105, 75, 105, 115, GRAY4, DOT_PIXEL_1X1, LINE_STYLE_DOTTED);
+    Paint_DrawString_EN(10, 0, "waveshare", &Font16, GRAY4, GRAY1);
+    Paint_DrawString_EN(10, 20, "hello world", &Font12, GRAY3, GRAY1);
+    Paint_DrawNum(10, 33, 123456789, &Font12, GRAY4, GRAY2);
+    Paint_DrawNum(10, 50, 987654321, &Font16, GRAY1, GRAY4);
+    Paint_DrawString_CN(150, 0,"<EFBFBD><EFBFBD><EFBFBD><EFBFBD>abc", &Font12CN, GRAY4, GRAY1);
+    Paint_DrawString_CN(150, 20,"<EFBFBD><EFBFBD><EFBFBD><EFBFBD>abc", &Font12CN, GRAY3, GRAY2);
+    Paint_DrawString_CN(150, 40,"<EFBFBD><EFBFBD><EFBFBD><EFBFBD>abc", &Font12CN, GRAY2, GRAY3);
+    Paint_DrawString_CN(150, 60,"<EFBFBD><EFBFBD><EFBFBD><EFBFBD>abc", &Font12CN, GRAY1, GRAY4);
+    Paint_DrawString_CN(150, 80, "΢ѩ<EFBFBD><EFBFBD><EFBFBD><EFBFBD>", &Font24CN, GRAY1, GRAY4);
+    EPD_2IN9_V2_4GrayDisplay(BlackImage);
+    DEV_Delay_ms(3000);
+
+    Paint_NewImage(BlackImage, EPD_2IN9_V2_WIDTH, EPD_2IN9_V2_HEIGHT, 0, WHITE);
+    Paint_SetScale(4);
+    Paint_Clear(WHITE);
+    Paint_DrawBitMap(gImage_2in9_4gray);
+    EPD_2IN9_V2_4GrayDisplay(BlackImage);
+    DEV_Delay_ms(3000);
+
+#endif
+
+	printf("Clear...\r\n");
+	EPD_2IN9_V2_Init();
+    EPD_2IN9_V2_Clear();
+	
+    printf("Goto Sleep...\r\n");
+    EPD_2IN9_V2_Sleep();
+    free(BlackImage);
+    BlackImage = NULL;
+    DEV_Delay_ms(2000);//important, at least 2s
+    // close 5V
+    printf("close 5V, Module enters 0 power consumption ...\r\n");
+    DEV_Module_Exit();
+    return 0;
+}

Pico_ePaper_Code/c/examples/EPD_2in9b_V3_test.c

@@ -0,0 +1,121 @@
+/*****************************************************************************
+* | File      	:   EPD_2in9b_V3_test.c
+* | Author      :   Waveshare team
+* | Function    :   2.9inch B V3 e-paper test demo
+* | Info        :
+*----------------
+* |	This version:   V1.1
+* | Date        :   2020-12-03
+* | Info        :
+#
+# Permission is hereby granted, free of charge, to any person obtaining a copy
+# of this software and associated documnetation files (the "Software"), to deal
+# in the Software without restriction, including without limitation the rights
+# to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+# copies of the Software, and to permit persons to  whom the Software is
+# furished to do so, subject to the following conditions:
+#
+# The above copyright notice and this permission notice shall be included in
+# all copies or substantial portions of the Software.
+#
+# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+# FITNESS OR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+# AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+# LIABILITY WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+# OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+# THE SOFTWARE.
+#
+******************************************************************************/
+#include "EPD_Test.h"
+#include "EPD_2in9b_V3.h"
+ 
+int EPD_2in9b_V3_test(void)
+{
+    printf("EPD_2IN9B_V3_test Demo\r\n");
+    if(DEV_Module_Init()!=0){
+        return -1;
+    }
+
+    printf("e-Paper Init and Clear...\r\n");
+    EPD_2IN9B_V3_Init();
+    EPD_2IN9B_V3_Clear();
+    DEV_Delay_ms(500);
+    
+    //Create a new image cache named IMAGE_BW and fill it with white
+    UBYTE *BlackImage, *RYImage; // Red or Yellow
+    UWORD Imagesize = ((EPD_2IN9B_V3_WIDTH % 8 == 0)? (EPD_2IN9B_V3_WIDTH / 8 ): (EPD_2IN9B_V3_WIDTH / 8 + 1)) * EPD_2IN9B_V3_HEIGHT;
+    if((BlackImage = (UBYTE *)malloc(Imagesize)) == NULL) {
+        printf("Failed to apply for black memory...\r\n");
+        return -1;
+    }
+    if((RYImage = (UBYTE *)malloc(Imagesize)) == NULL) {
+        printf("Failed to apply for red memory...\r\n");
+        return -1;
+    }
+    printf("NewImage:BlackImage and RYImage\r\n");
+    Paint_NewImage(BlackImage, EPD_2IN9B_V3_WIDTH, EPD_2IN9B_V3_HEIGHT, 270, WHITE);
+    Paint_NewImage(RYImage, EPD_2IN9B_V3_WIDTH, EPD_2IN9B_V3_HEIGHT, 270, WHITE);
+
+    //Select Image
+    Paint_SelectImage(BlackImage);
+    Paint_Clear(WHITE);
+    Paint_SelectImage(RYImage);
+    Paint_Clear(WHITE);
+
+#if 1   // show image for array    
+    printf("show image for array\r\n");
+    EPD_2IN9B_V3_Display(gImage_2in9bc_b, gImage_2in9bc_ry);
+    DEV_Delay_ms(2000);
+#endif
+
+#if 1   // Drawing on the image
+    /*Horizontal screen*/
+    //1.Draw black image
+    Paint_SelectImage(BlackImage);
+    Paint_Clear(WHITE);
+    Paint_DrawPoint(10, 80, BLACK, DOT_PIXEL_1X1, DOT_STYLE_DFT);
+    Paint_DrawPoint(10, 90, BLACK, DOT_PIXEL_2X2, DOT_STYLE_DFT);
+    Paint_DrawPoint(10, 100, BLACK, DOT_PIXEL_3X3, DOT_STYLE_DFT);
+    Paint_DrawPoint(10, 110, BLACK, DOT_PIXEL_3X3, DOT_STYLE_DFT);
+    Paint_DrawLine(20, 70, 70, 120, BLACK, DOT_PIXEL_1X1, LINE_STYLE_SOLID);
+    Paint_DrawLine(70, 70, 20, 120, BLACK, DOT_PIXEL_1X1, LINE_STYLE_SOLID);
+    Paint_DrawRectangle(20, 70, 70, 120, BLACK, DOT_PIXEL_1X1, DRAW_FILL_EMPTY);
+    Paint_DrawRectangle(80, 70, 130, 120, BLACK, DOT_PIXEL_1X1, DRAW_FILL_FULL);
+    Paint_DrawString_EN(10, 0, "waveshare", &Font16, BLACK, WHITE);
+    Paint_DrawString_CN(130, 20, "΢ѩ<EFBFBD><EFBFBD><EFBFBD><EFBFBD>", &Font24CN, WHITE, BLACK);
+    Paint_DrawNum(10, 50, 987654321, &Font16, WHITE, BLACK);
+
+    //2.Draw red image
+    Paint_SelectImage(RYImage);
+    Paint_Clear(WHITE);
+    Paint_DrawCircle(160, 95, 20, BLACK, DOT_PIXEL_1X1, DRAW_FILL_EMPTY);
+    Paint_DrawCircle(210, 95, 20, BLACK, DOT_PIXEL_1X1, DRAW_FILL_FULL);
+    Paint_DrawLine(85, 95, 125, 95, BLACK, DOT_PIXEL_1X1, LINE_STYLE_DOTTED);
+    Paint_DrawLine(105, 75, 105, 115, BLACK, DOT_PIXEL_1X1, LINE_STYLE_DOTTED);
+    Paint_DrawString_CN(130, 0,"<EFBFBD><EFBFBD><EFBFBD><EFBFBD>abc", &Font12CN, BLACK, WHITE);
+    Paint_DrawString_EN(10, 20, "hello world", &Font12, WHITE, BLACK);
+    Paint_DrawNum(10, 33, 123456789, &Font12, BLACK, WHITE);
+
+    printf("EPD_Display\r\n");
+    EPD_2IN9B_V3_Display(BlackImage, RYImage);
+    DEV_Delay_ms(2000);
+#endif
+
+    printf("Clear...\r\n");
+    EPD_2IN9B_V3_Clear();
+
+    printf("Goto Sleep...\r\n");
+    EPD_2IN9B_V3_Sleep();
+    free(BlackImage);
+    free(RYImage);
+    BlackImage = NULL;
+    RYImage = NULL;
+    DEV_Delay_ms(2000);//important, at least 2s
+    // close 5V
+    printf("close 5V, Module enters 0 power consumption ...\r\n");
+    DEV_Module_Exit();
+    
+    return 0;
+}
+

Pico_ePaper_Code/c/examples/EPD_2in9b_V4_test.c

@@ -0,0 +1,175 @@
+/*****************************************************************************
+* | File      	:   EPD_2in9b_V4_test.c
+* | Author      :   Waveshare team
+* | Function    :   2.9inch B V4 e-paper test demo
+* | Info        :
+*----------------
+* |	This version:   V1.0
+* | Date        :   2023-12-18
+* | Info        :
+#
+# Permission is hereby granted, free of charge, to any person obtaining a copy
+# of this software and associated documnetation files (the "Software"), to deal
+# in the Software without restriction, including without limitation the rights
+# to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+# copies of the Software, and to permit persons to  whom the Software is
+# furished to do so, subject to the following conditions:
+#
+# The above copyright notice and this permission notice shall be included in
+# all copies or substantial portions of the Software.
+#
+# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+# FITNESS OR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+# AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+# LIABILITY WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+# OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+# THE SOFTWARE.
+#
+******************************************************************************/
+#include "EPD_Test.h"
+#include "EPD_2in9b_V4.h"
+ 
+int EPD_2in9b_V4_test(void)
+{
+    printf("EPD_2IN9B_V4_test Demo\r\n");
+    if(DEV_Module_Init()!=0){
+        return -1;
+    }
+
+    printf("e-Paper Init and Clear...\r\n");
+    EPD_2IN9B_V4_Init();
+    EPD_2IN9B_V4_Clear();
+    DEV_Delay_ms(500);
+    
+
+    //Create a new image cache named IMAGE_BW and fill it with white
+    UBYTE *BlackImage, *RYImage; // Red or Yellow
+    UWORD Imagesize = ((EPD_2IN9B_V4_WIDTH % 8 == 0)? (EPD_2IN9B_V4_WIDTH / 8 ): (EPD_2IN9B_V4_WIDTH / 8 + 1)) * EPD_2IN9B_V4_HEIGHT;
+    if((BlackImage = (UBYTE *)malloc(Imagesize)) == NULL) {
+        printf("Failed to apply for black memory...\r\n");
+        return -1;
+    }
+    if((RYImage = (UBYTE *)malloc(Imagesize)) == NULL) {
+        printf("Failed to apply for red memory...\r\n");
+        return -1;
+    }
+    printf("NewImage:BlackImage and RYImage\r\n");
+    Paint_NewImage(BlackImage, EPD_2IN9B_V4_WIDTH, EPD_2IN9B_V4_HEIGHT, 270, WHITE);
+    Paint_NewImage(RYImage, EPD_2IN9B_V4_WIDTH, EPD_2IN9B_V4_HEIGHT, 270, WHITE);
+
+    //Select Image
+    Paint_SelectImage(BlackImage);
+    Paint_Clear(WHITE);
+    Paint_SelectImage(RYImage);
+    Paint_Clear(WHITE);
+
+#if 1  // show image for array    
+    EPD_2IN9B_V4_Init_Fast();
+    printf("show image for array\r\n");
+    EPD_2IN9B_V4_Display_Fast(gImage_2in9bc_b, gImage_2in9bc_ry);
+    DEV_Delay_ms(2000);
+#endif
+
+#if 1   // Drawing on the image
+    /*Horizontal screen*/
+    //1.Draw black image
+    EPD_2IN9B_V4_Init();
+    Paint_SelectImage(BlackImage);
+    Paint_Clear(WHITE);
+    Paint_DrawPoint(10, 80, BLACK, DOT_PIXEL_1X1, DOT_STYLE_DFT);
+    Paint_DrawPoint(10, 90, BLACK, DOT_PIXEL_2X2, DOT_STYLE_DFT);
+    Paint_DrawPoint(10, 100, BLACK, DOT_PIXEL_3X3, DOT_STYLE_DFT);
+    Paint_DrawPoint(10, 110, BLACK, DOT_PIXEL_3X3, DOT_STYLE_DFT);
+    Paint_DrawLine(20, 70, 70, 120, BLACK, DOT_PIXEL_1X1, LINE_STYLE_SOLID);
+    Paint_DrawLine(70, 70, 20, 120, BLACK, DOT_PIXEL_1X1, LINE_STYLE_SOLID);
+    Paint_DrawRectangle(20, 70, 70, 120, BLACK, DOT_PIXEL_1X1, DRAW_FILL_EMPTY);
+    Paint_DrawRectangle(80, 70, 130, 120, BLACK, DOT_PIXEL_1X1, DRAW_FILL_FULL);
+    Paint_DrawString_EN(10, 0, "waveshare", &Font16, BLACK, WHITE);
+    Paint_DrawString_CN(130, 20, "΢ѩ<EFBFBD><EFBFBD><EFBFBD><EFBFBD>", &Font24CN, WHITE, BLACK);
+    Paint_DrawNum(10, 50, 987654321, &Font16, WHITE, BLACK);
+
+    //2.Draw red image
+    Paint_SelectImage(RYImage);
+    Paint_Clear(WHITE);
+    // Paint_DrawCircle(160, 95, 20, BLACK, DOT_PIXEL_1X1, DRAW_FILL_EMPTY);
+    // Paint_DrawCircle(210, 95, 20, BLACK, DOT_PIXEL_1X1, DRAW_FILL_FULL);
+    Paint_DrawLine(85, 95, 125, 95, BLACK, DOT_PIXEL_1X1, LINE_STYLE_DOTTED);
+    Paint_DrawLine(105, 75, 105, 115, BLACK, DOT_PIXEL_1X1, LINE_STYLE_DOTTED);
+    Paint_DrawString_CN(130, 0,"<EFBFBD><EFBFBD><EFBFBD><EFBFBD>abc", &Font12CN, BLACK, WHITE);
+    Paint_DrawString_EN(10, 20, "hello world", &Font12, WHITE, BLACK);
+    Paint_DrawNum(10, 33, 123456789, &Font12, BLACK, WHITE);
+
+    printf("EPD_Display\r\n");
+    EPD_2IN9B_V4_Display_Base(BlackImage, RYImage);
+    // EPD_2IN9B_V4_Display(BlackImage, RYImage);
+    DEV_Delay_ms(2000);
+#endif
+
+#if 1   //Partial refresh, example shows time    	
+    // If you didn't use the EPD_2IN9B_V4_Display_Base() function to refresh the image before,
+    // use the EPD_2IN9B_V4_Display_Base_color() function to refresh the background color, 
+    // otherwise the background color will be garbled 
+    // EPD_2IN9B_V4_Init();
+    // EPD_2IN9B_V4_Display_Base(BlackImage, RYImage);
+    // EPD_2IN9B_V4_Display_Base_color(WHITE);
+	Paint_NewImage(BlackImage, 50, 120, 270, WHITE);
+    
+    printf("Partial refresh\r\n");
+    Paint_SelectImage(BlackImage);
+	Paint_SetScale(2);
+    Paint_Clear(WHITE);
+    
+    PAINT_TIME sPaint_time;
+    sPaint_time.Hour = 12;
+    sPaint_time.Min = 34;
+    sPaint_time.Sec = 56;
+    UBYTE num = 15;
+    for (;;) {
+        sPaint_time.Sec = sPaint_time.Sec + 1;
+        if (sPaint_time.Sec == 60) {
+            sPaint_time.Min = sPaint_time.Min + 1;
+            sPaint_time.Sec = 0;
+            if (sPaint_time.Min == 60) {
+                sPaint_time.Hour =  sPaint_time.Hour + 1;
+                sPaint_time.Min = 0;
+                if (sPaint_time.Hour == 24) {
+                    sPaint_time.Hour = 0;
+                    sPaint_time.Min = 0;
+                    sPaint_time.Sec = 0;
+                }
+            }
+        }
+        
+        Paint_Clear(WHITE);
+		Paint_DrawRectangle(1, 1, 120, 50, BLACK, DOT_PIXEL_1X1, DRAW_FILL_EMPTY);
+        Paint_DrawTime(10, 15, &sPaint_time, &Font20, WHITE, BLACK);
+
+        num = num - 1;
+        if(num == 0) {
+            break;
+        }
+		printf("Part refresh...\r\n");
+        EPD_2IN9B_V4_Display_Partial(BlackImage, 70, 35, 120, 155); // Xstart must be a multiple of 8
+        DEV_Delay_ms(500);
+    }
+#endif
+
+    printf("Clear...\r\n");
+    EPD_2IN9B_V4_Init();
+    EPD_2IN9B_V4_Clear();
+
+    printf("Goto Sleep...\r\n");
+    EPD_2IN9B_V4_Sleep();
+    free(BlackImage);
+    free(RYImage);
+    BlackImage = NULL;
+    RYImage = NULL;
+    DEV_Delay_ms(2000);//important, at least 2s
+    // close 5V
+    printf("close 5V, Module enters 0 power consumption ...\r\n");
+    DEV_Module_Exit();
+    
+    return 0;
+}
+

Pico_ePaper_Code/c/examples/EPD_2in9bc_test.c

@@ -0,0 +1,121 @@
+/*****************************************************************************
+* | File      	:   EPD_2in9bc_test.c
+* | Author      :   Waveshare team
+* | Function    :   2.9inch B&C e-paper test demo
+* | Info        :
+*----------------
+* |	This version:   V1.0
+* | Date        :   2019-06-12
+* | Info        :
+#
+# Permission is hereby granted, free of charge, to any person obtaining a copy
+# of this software and associated documnetation files (the "Software"), to deal
+# in the Software without restriction, including without limitation the rights
+# to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+# copies of the Software, and to permit persons to  whom the Software is
+# furished to do so, subject to the following conditions:
+#
+# The above copyright notice and this permission notice shall be included in
+# all copies or substantial portions of the Software.
+#
+# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+# FITNESS OR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+# AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+# LIABILITY WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+# OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+# THE SOFTWARE.
+#
+******************************************************************************/
+#include "EPD_Test.h"
+#include "EPD_2in9bc.h"
+
+int EPD_2in9bc_test(void)
+{
+    printf("EPD_2IN9BC_test Demo\r\n");
+    if(DEV_Module_Init()!=0){
+        return -1;
+    }
+    
+    printf("e-Paper Init and Clear...\r\n");
+    EPD_2IN9BC_Init();
+    EPD_2IN9BC_Clear();
+    DEV_Delay_ms(500);
+
+    //Create a new image cache named IMAGE_BW and fill it with white
+    UBYTE *BlackImage, *RYImage; // Red or Yellow
+    UWORD Imagesize = ((EPD_2IN9BC_WIDTH % 8 == 0)? (EPD_2IN9BC_WIDTH / 8 ): (EPD_2IN9BC_WIDTH / 8 + 1)) * EPD_2IN9BC_HEIGHT;
+    if((BlackImage = (UBYTE *)malloc(Imagesize)) == NULL) {
+        printf("Failed to apply for black memory...\r\n");
+        return -1;
+    }
+    if((RYImage = (UBYTE *)malloc(Imagesize)) == NULL) {
+        printf("Failed to apply for red memory...\r\n");
+        return -1;
+    }
+    printf("NewImage:BlackImage and RYImage\r\n");
+    Paint_NewImage(BlackImage, EPD_2IN9BC_WIDTH, EPD_2IN9BC_HEIGHT, 270, WHITE);
+    Paint_NewImage(RYImage, EPD_2IN9BC_WIDTH, EPD_2IN9BC_HEIGHT, 270, WHITE);
+
+    //Select Image
+    Paint_SelectImage(BlackImage);
+    Paint_Clear(WHITE);
+    Paint_SelectImage(RYImage);
+    Paint_Clear(WHITE);
+
+#if 1   // show image for array    
+    printf("show image for array\r\n");
+    EPD_2IN9BC_Display(gImage_2in9bc_b, gImage_2in9bc_ry);
+    DEV_Delay_ms(2000);
+#endif
+
+#if 1   // Drawing on the image
+    /*Horizontal screen*/
+    //1.Draw black image
+    Paint_SelectImage(BlackImage);
+    Paint_Clear(WHITE);
+    Paint_DrawPoint(10, 80, BLACK, DOT_PIXEL_1X1, DOT_STYLE_DFT);
+    Paint_DrawPoint(10, 90, BLACK, DOT_PIXEL_2X2, DOT_STYLE_DFT);
+    Paint_DrawPoint(10, 100, BLACK, DOT_PIXEL_3X3, DOT_STYLE_DFT);
+    Paint_DrawPoint(10, 110, BLACK, DOT_PIXEL_3X3, DOT_STYLE_DFT);
+    Paint_DrawLine(20, 70, 70, 120, BLACK, DOT_PIXEL_1X1, LINE_STYLE_SOLID);
+    Paint_DrawLine(70, 70, 20, 120, BLACK, DOT_PIXEL_1X1, LINE_STYLE_SOLID);
+    Paint_DrawRectangle(20, 70, 70, 120, BLACK, DOT_PIXEL_1X1, DRAW_FILL_EMPTY);
+    Paint_DrawRectangle(80, 70, 130, 120, BLACK, DOT_PIXEL_1X1, DRAW_FILL_FULL);
+    Paint_DrawString_EN(10, 0, "waveshare", &Font16, BLACK, WHITE);
+    Paint_DrawString_CN(130, 20, "΢ѩ<EFBFBD><EFBFBD><EFBFBD><EFBFBD>", &Font24CN, WHITE, BLACK);
+    Paint_DrawNum(10, 50, 987654321, &Font16, WHITE, BLACK);
+
+    //2.Draw red image
+    Paint_SelectImage(RYImage);
+    Paint_Clear(WHITE);
+    Paint_DrawCircle(160, 95, 20, BLACK, DOT_PIXEL_1X1, DRAW_FILL_EMPTY);
+    Paint_DrawCircle(210, 95, 20, BLACK, DOT_PIXEL_1X1, DRAW_FILL_FULL);
+    Paint_DrawLine(85, 95, 125, 95, BLACK, DOT_PIXEL_1X1, LINE_STYLE_DOTTED);
+    Paint_DrawLine(105, 75, 105, 115, BLACK, DOT_PIXEL_1X1, LINE_STYLE_DOTTED);
+    Paint_DrawString_CN(130, 0,"<EFBFBD><EFBFBD><EFBFBD><EFBFBD>abc", &Font12CN, BLACK, WHITE);
+    Paint_DrawString_EN(10, 20, "hello world", &Font12, WHITE, BLACK);
+    Paint_DrawNum(10, 33, 123456789, &Font12, BLACK, WHITE);
+
+    printf("EPD_Display\r\n");
+    EPD_2IN9BC_Display(BlackImage, RYImage);
+    DEV_Delay_ms(2000);
+#endif
+
+    printf("Clear...\r\n");
+    EPD_2IN9BC_Clear();
+
+    printf("Goto Sleep...\r\n");
+    EPD_2IN9BC_Sleep();
+    free(BlackImage);
+    free(RYImage);
+    BlackImage = NULL;
+    RYImage = NULL;
+    DEV_Delay_ms(2000);//important, at least 2s
+    // close 5V
+    printf("close 5V, Module enters 0 power consumption ...\r\n");
+    DEV_Module_Exit();
+    
+    return 0;
+}
+

Pico_ePaper_Code/c/examples/EPD_2in9d_test.c

@@ -0,0 +1,146 @@
+/*****************************************************************************
+* | File      	:   EPD_2in9d_test.c
+* | Author      :   Waveshare team
+* | Function    :   2.9inch e-paper d test demo
+* | Info        :
+*----------------
+* |	This version:   V1.0
+* | Date        :   2019-06-13
+* | Info        :
+#
+# Permission is hereby granted, free of charge, to any person obtaining a copy
+# of this software and associated documnetation files (the "Software"), to deal
+# in the Software without restriction, including without limitation the rights
+# to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+# copies of the Software, and to permit persons to  whom the Software is
+# furished to do so, subject to the following conditions:
+#
+# The above copyright notice and this permission notice shall be included in
+# all copies or substantial portions of the Software.
+#
+# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+# FITNESS OR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+# AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+# LIABILITY WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+# OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+# THE SOFTWARE.
+#
+******************************************************************************/
+#include "EPD_Test.h"
+#include "EPD_2in9d.h"
+
+int EPD_2in9d_test(void)
+{
+    printf("EPD_2IN9D_test Demo\r\n");
+    if(DEV_Module_Init()!=0){
+        return -1;
+    }
+
+    printf("e-Paper Init and Clear...\r\n");
+    EPD_2IN9D_Init();
+    EPD_2IN9D_Clear();
+    DEV_Delay_ms(500);
+
+    //Create a new image cache
+    UBYTE *BlackImage;
+    /* you have to edit the startup_stm32fxxx.s file and set a big enough heap size */
+    UWORD Imagesize = ((EPD_2IN9D_WIDTH % 8 == 0)? (EPD_2IN9D_WIDTH / 8 ): (EPD_2IN9D_WIDTH / 8 + 1)) * EPD_2IN9D_HEIGHT;
+    if((BlackImage = (UBYTE *)malloc(Imagesize)) == NULL) {
+        printf("Failed to apply for black memory...\r\n");
+        return -1;
+    }
+    printf("Paint_NewImage\r\n");
+    Paint_NewImage(BlackImage, EPD_2IN9D_WIDTH, EPD_2IN9D_HEIGHT, 270, WHITE); 
+    
+#if 1   //show image for array    
+    printf("show image for array\r\n");
+    Paint_SelectImage(BlackImage);
+    Paint_Clear(WHITE);
+    Paint_DrawBitMap(gImage_2in9);
+
+    EPD_2IN9D_Display(BlackImage);
+    DEV_Delay_ms(2000);
+#endif
+
+#if 1   // Drawing on the image
+    //1.Select Image
+    printf("SelectImage:BlackImage\r\n");
+    Paint_SelectImage(BlackImage);
+    Paint_Clear(WHITE);
+
+    // 2.Drawing on the image
+    printf("Drawing:BlackImage\r\n");
+    Paint_DrawPoint(10, 80, BLACK, DOT_PIXEL_1X1, DOT_STYLE_DFT);
+    Paint_DrawPoint(10, 90, BLACK, DOT_PIXEL_2X2, DOT_STYLE_DFT);
+    Paint_DrawPoint(10, 100, BLACK, DOT_PIXEL_3X3, DOT_STYLE_DFT);
+    Paint_DrawLine(20, 70, 70, 120, BLACK, DOT_PIXEL_1X1, LINE_STYLE_SOLID);
+    Paint_DrawLine(70, 70, 20, 120, BLACK, DOT_PIXEL_1X1, LINE_STYLE_SOLID);    
+    Paint_DrawRectangle(20, 70, 70, 120, BLACK, DOT_PIXEL_1X1, DRAW_FILL_EMPTY);
+    Paint_DrawRectangle(80, 70, 130, 120, BLACK, DOT_PIXEL_1X1, DRAW_FILL_FULL);
+    Paint_DrawCircle(45, 95, 20, BLACK, DOT_PIXEL_1X1, DRAW_FILL_EMPTY);
+    Paint_DrawCircle(105, 95, 20, WHITE, DOT_PIXEL_1X1, DRAW_FILL_FULL);
+    Paint_DrawLine(85, 95, 125, 95, BLACK, DOT_PIXEL_1X1, LINE_STYLE_DOTTED);
+    Paint_DrawLine(105, 75, 105, 115, BLACK, DOT_PIXEL_1X1, LINE_STYLE_DOTTED);
+    Paint_DrawString_EN(10, 0, "waveshare", &Font16, BLACK, WHITE);
+    Paint_DrawString_EN(10, 20, "hello world", &Font12, WHITE, BLACK);
+    Paint_DrawNum(10, 33, 123456789, &Font12, BLACK, WHITE);
+    Paint_DrawNum(10, 50, 987654321, &Font16, WHITE, BLACK);
+    Paint_DrawString_CN(130, 0, "<EFBFBD><EFBFBD><EFBFBD><EFBFBD>abc", &Font12CN, BLACK, WHITE);
+    Paint_DrawString_CN(130, 20, "΢ѩ<EFBFBD><EFBFBD><EFBFBD><EFBFBD>", &Font24CN, WHITE, BLACK);
+
+    printf("EPD_Display\r\n");
+    EPD_2IN9D_Display(BlackImage);
+    DEV_Delay_ms(2000);
+#endif
+
+#if 1   //Partial refresh, example shows time    		
+    printf("Partial refresh\r\n");
+    PAINT_TIME sPaint_time;
+    sPaint_time.Hour = 12;
+    sPaint_time.Min = 34;
+    sPaint_time.Sec = 56;
+    UBYTE num = 20;
+    for (;;) {
+        sPaint_time.Sec = sPaint_time.Sec + 1;
+        if (sPaint_time.Sec == 60) {
+            sPaint_time.Min = sPaint_time.Min + 1;
+            sPaint_time.Sec = 0;
+            if (sPaint_time.Min == 60) {
+                sPaint_time.Hour =  sPaint_time.Hour + 1;
+                sPaint_time.Min = 0;
+                if (sPaint_time.Hour == 24) {
+                    sPaint_time.Hour = 0;
+                    sPaint_time.Min = 0;
+                    sPaint_time.Sec = 0;
+                }
+            }
+        }
+        Paint_ClearWindows(150, 80, 150 + Font20.Width * 7, 80 + Font20.Height, WHITE);
+        Paint_DrawTime(150, 80, &sPaint_time, &Font20, WHITE, BLACK);
+
+        num = num - 1;
+        if(num == 0) {
+            break;
+        }
+        EPD_2IN9D_DisplayPart(BlackImage);
+        DEV_Delay_ms(500);//Analog clock 1s
+    }
+
+#endif
+    printf("Clear...\r\n");
+//    EPD_2IN9D_Init();
+    EPD_2IN9D_Clear();
+
+    printf("Goto Sleep...\r\n");
+    EPD_2IN9D_Sleep();
+    free(BlackImage);
+    BlackImage = NULL;
+    DEV_Delay_ms(2000);//important, at least 2s
+    // close 5V
+    printf("close 5V, Module enters 0 power consumption ...\r\n");
+    DEV_Module_Exit();
+    
+    return 0;
+}
+

Pico_ePaper_Code/c/examples/EPD_3in7_test.c

@@ -0,0 +1,151 @@
+/*****************************************************************************
+* | File      	:   EPD_3IN7_test.c
+* | Author      :   Waveshare team
+* | Function    :   3.7inch e-paper test demo
+* | Info        :
+*----------------
+* |	This version:   V1.0
+* | Date        :   2020-07-16
+* | Info        :
+#
+# Permission is hereby granted, free of charge, to any person obtaining a copy
+# of this software and associated documnetation files (the "Software"), to deal
+# in the Software without restriction, including without limitation the rights
+# to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+# copies of the Software, and to permit persons to  whom the Software is
+# furished to do so, subject to the following conditions:
+#
+# The above copyright notice and this permission notice shall be included in
+# all copies or substantial portions of the Software.
+#
+# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+# FITNESS OR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+# AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+# LIABILITY WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+# OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+# THE SOFTWARE.
+#
+******************************************************************************/
+#include "EPD_Test.h"
+#include "EPD_3in7.h"
+
+int EPD_3in7_test(void)
+{
+    printf("EPD_3IN7_test Demo\r\n");
+    if(DEV_Module_Init()!=0){
+        return -1;
+    }
+
+    printf("e-Paper Init and Clear...\r\n");
+	EPD_3IN7_4Gray_Init();
+    EPD_3IN7_4Gray_Clear();
+    DEV_Delay_ms(500);
+
+    //Create a new image cache
+    UBYTE *BlackImage;
+    /* you have to edit the startup_stm32fxxx.s file and set a big enough heap size */
+    UWORD Imagesize = ((EPD_3IN7_WIDTH % 4 == 0)? (EPD_3IN7_WIDTH / 4 ): (EPD_3IN7_WIDTH / 4 + 1)) * EPD_3IN7_HEIGHT;
+    if((BlackImage = (UBYTE *)malloc(Imagesize)) == NULL) {
+        printf("Failed to apply for black memory...\r\n");
+        return -1;
+    }
+
+    printf("Paint_NewImage\r\n");
+    Paint_NewImage(BlackImage, EPD_3IN7_WIDTH, EPD_3IN7_HEIGHT, 90, WHITE);
+    Paint_SetScale(4);
+    Paint_Clear(WHITE);
+
+#if 1 // Drawing on the image, partial display
+    //1.Select Image
+    printf("SelectImage:BlackImage\r\n");
+    Paint_SelectImage(BlackImage);
+    Paint_SetScale(4);
+    Paint_Clear(WHITE);
+
+    // 2.Drawing on the image
+    printf("Drawing:BlackImage\r\n");
+    Paint_DrawPoint(10, 80, BLACK, DOT_PIXEL_1X1, DOT_STYLE_DFT);
+    Paint_DrawPoint(10, 90, BLACK, DOT_PIXEL_2X2, DOT_STYLE_DFT);
+    Paint_DrawPoint(10, 100, BLACK, DOT_PIXEL_3X3, DOT_STYLE_DFT);
+    Paint_DrawLine(20, 70, 70, 120, BLACK, DOT_PIXEL_1X1, LINE_STYLE_SOLID);
+    Paint_DrawLine(70, 70, 20, 120, BLACK, DOT_PIXEL_1X1, LINE_STYLE_SOLID);
+    Paint_DrawRectangle(20, 70, 70, 120, BLACK, DOT_PIXEL_1X1, DRAW_FILL_EMPTY);
+    Paint_DrawRectangle(80, 70, 130, 120, BLACK, DOT_PIXEL_1X1, DRAW_FILL_FULL);
+    Paint_DrawCircle(45, 95, 20, BLACK, DOT_PIXEL_1X1, DRAW_FILL_EMPTY);
+    Paint_DrawCircle(105, 95, 20, WHITE, DOT_PIXEL_1X1, DRAW_FILL_FULL);
+    Paint_DrawLine(85, 95, 125, 95, BLACK, DOT_PIXEL_1X1, LINE_STYLE_DOTTED);
+    Paint_DrawLine(105, 75, 105, 115, BLACK, DOT_PIXEL_1X1, LINE_STYLE_DOTTED);
+    Paint_DrawString_EN(10, 0, "waveshare", &Font16, BLACK, WHITE);
+    Paint_DrawString_EN(10, 20, "hello world", &Font12, WHITE, BLACK);
+    Paint_DrawNum(10, 33, 123456789, &Font12, BLACK, WHITE);
+    Paint_DrawNum(10, 50, 987654321, &Font16, WHITE, BLACK);
+    Paint_DrawString_EN(10, 150, "GRAY1 with black background", &Font24, BLACK, GRAY1);
+    Paint_DrawString_EN(10, 175, "GRAY2 with white background", &Font24, WHITE, GRAY2);
+    Paint_DrawString_EN(10, 200, "GRAY3 with white background", &Font24, WHITE, GRAY3);
+    Paint_DrawString_EN(10, 225, "GRAY4 with white background", &Font24, WHITE, GRAY4);
+    printf("EPD_Display\r\n");
+    EPD_3IN7_4Gray_Display(BlackImage);
+    DEV_Delay_ms(4000);
+#endif
+
+#if 1 // partial update, just 1 Gray mode
+    Paint_NewImage(BlackImage, 50, 120, 90, WHITE);
+    EPD_3IN7_1Gray_Init();       //init 1 Gray mode
+    EPD_3IN7_1Gray_Clear();
+    Paint_SelectImage(BlackImage);
+    Paint_SetScale(2);
+    Paint_Clear(WHITE);
+    printf("show time, partial update, just 1 Gary mode\r\n");
+    PAINT_TIME sPaint_time;
+    sPaint_time.Hour = 12;
+    sPaint_time.Min = 34;
+    sPaint_time.Sec = 56;
+    UBYTE num = 15;
+    for (;;) {
+        sPaint_time.Sec = sPaint_time.Sec + 1;
+        if (sPaint_time.Sec == 60) {
+            sPaint_time.Min = sPaint_time.Min + 1;
+            sPaint_time.Sec = 0;
+            if (sPaint_time.Min == 60) {
+                sPaint_time.Hour =  sPaint_time.Hour + 1;
+                sPaint_time.Min = 0;
+                if (sPaint_time.Hour == 24) {
+                    sPaint_time.Hour = 0;
+                    sPaint_time.Min = 0;
+                    sPaint_time.Sec = 0;
+                }
+            }
+        }
+	    Paint_Clear(WHITE);
+		Paint_DrawRectangle(1, 1, 120, 50, BLACK, DOT_PIXEL_1X1, DRAW_FILL_EMPTY);
+        Paint_DrawTime(10, 15, &sPaint_time, &Font20, WHITE, BLACK);
+
+        num = num - 1;
+        if(num == 0) {
+            break;
+        }
+
+        printf("Part refresh...\r\n");
+        EPD_3IN7_1Gray_Display_Part(BlackImage, 210, 340, 260, 460); // Xstart must be a multiple of 8
+        DEV_Delay_ms(500);
+    }
+
+#endif
+    EPD_3IN7_4Gray_Init();
+    printf("Clear...\r\n");
+    EPD_3IN7_4Gray_Clear();
+    
+    // Sleep & close 5V
+    printf("Goto Sleep...\r\n");
+    EPD_3IN7_Sleep();
+
+    free(BlackImage);
+    BlackImage = NULL;
+    DEV_Delay_ms(2000);//important, at least 2s
+    printf("close 5V, Module enters 0 power consumption ...\r\n");
+    DEV_Module_Exit();
+
+    return 0;
+}
+

Pico_ePaper_Code/c/examples/EPD_4in2_V2_test.c

@@ -0,0 +1,263 @@
+/*****************************************************************************
+* | File      	:   EPD_4in2_V2_test.c
+* | Author      :   Waveshare team
+* | Function    :   4.2inch e-paper V2 test demo
+* | Info        :
+*----------------
+* |	This version:   V1.0
+* | Date        :   2023-09-12
+* | Info        :
+* -----------------------------------------------------------------------------
+#
+# Permission is hereby granted, free of charge, to any person obtaining a copy
+# of this software and associated documnetation files (the "Software"), to deal
+# in the Software without restriction, including without limitation the rights
+# to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+# copies of the Software, and to permit persons to  whom the Software is
+# furished to do so, subject to the following conditions:
+#
+# The above copyright notice and this permission notice shall be included in
+# all copies or substantial portions of the Software.
+#
+# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+# FITNESS OR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+# AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+# LIABILITY WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+# OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+# THE SOFTWARE.
+#
+******************************************************************************/
+#include "EPD_Test.h"
+#include "EPD_4in2_V2.h"
+#include <string.h>
+
+int EPD_4in2_V2_test(void)
+{
+    printf("EPD_4IN2_V2_test Demo\r\n");
+    if(DEV_Module_Init()!=0){
+        return -1;
+    }
+
+    printf("e-Paper Init and Clear...\r\n");
+    EPD_4IN2_V2_Init();
+    EPD_4IN2_V2_Clear();
+    DEV_Delay_ms(500);
+
+    //Create a new image cache
+    UBYTE *BlackImage;
+    /* you have to edit the startup_stm32fxxx.s file and set a big enough heap size */
+    UWORD Imagesize = ((EPD_4IN2_V2_WIDTH % 8 == 0)? (EPD_4IN2_V2_WIDTH / 8 ): (EPD_4IN2_V2_WIDTH / 8 + 1)) * EPD_4IN2_V2_HEIGHT;
+    if((BlackImage = (UBYTE *)malloc(Imagesize)) == NULL) {
+        printf("Failed to apply for black memory...\r\n");
+        return -1;
+    }
+    printf("Paint_NewImage\r\n");
+    Paint_NewImage(BlackImage, EPD_4IN2_V2_WIDTH, EPD_4IN2_V2_HEIGHT, 0, WHITE);
+
+#if 1  // show bmp
+    Paint_SelectImage(BlackImage);
+    Paint_Clear(WHITE);
+    Paint_DrawBitMap(gImage_4in2);
+    EPD_4IN2_V2_Display(BlackImage);
+    DEV_Delay_ms(2000);
+#endif        
+
+#if 0  // show image for array   
+    EPD_4IN2_V2_Init_Fast(Seconds_1S);
+    printf("show image for array\r\n");
+    Paint_SelectImage(BlackImage);
+    Paint_Clear(WHITE);
+    Paint_DrawBitMap(gImage_4in2);
+    EPD_4IN2_V2_Display_Fast(BlackImage);
+    DEV_Delay_ms(2000);
+#endif
+
+#if 1   // Drawing on the image
+
+    EPD_4IN2_V2_Init();
+    //1.Select Image
+    printf("SelectImage:BlackImage\r\n");
+    Paint_SelectImage(BlackImage);
+    Paint_Clear(WHITE);
+
+    // 2.Drawing on the image
+    printf("Drawing:BlackImage\r\n");
+    Paint_DrawPoint(10, 80, BLACK, DOT_PIXEL_1X1, DOT_STYLE_DFT);
+    Paint_DrawPoint(10, 90, BLACK, DOT_PIXEL_2X2, DOT_STYLE_DFT);
+    Paint_DrawPoint(10, 100, BLACK, DOT_PIXEL_3X3, DOT_STYLE_DFT);
+    Paint_DrawLine(20, 70, 70, 120, BLACK, DOT_PIXEL_1X1, LINE_STYLE_SOLID);
+    Paint_DrawLine(70, 70, 20, 120, BLACK, DOT_PIXEL_1X1, LINE_STYLE_SOLID);
+    Paint_DrawRectangle(20, 70, 70, 120, BLACK, DOT_PIXEL_1X1, DRAW_FILL_EMPTY);
+    Paint_DrawRectangle(80, 70, 130, 120, BLACK, DOT_PIXEL_1X1, DRAW_FILL_FULL);
+    Paint_DrawCircle(45, 95, 20, BLACK, DOT_PIXEL_1X1, DRAW_FILL_EMPTY);
+    Paint_DrawCircle(105, 95, 20, WHITE, DOT_PIXEL_1X1, DRAW_FILL_FULL);
+    Paint_DrawLine(85, 95, 125, 95, BLACK, DOT_PIXEL_1X1, LINE_STYLE_DOTTED);
+    Paint_DrawLine(105, 75, 105, 115, BLACK, DOT_PIXEL_1X1, LINE_STYLE_DOTTED);
+    Paint_DrawString_EN(10, 0, "waveshare", &Font16, BLACK, WHITE);
+    Paint_DrawString_EN(10, 20, "hello world", &Font12, WHITE, BLACK);
+    Paint_DrawNum(10, 33, 123456789, &Font12, BLACK, WHITE);
+    Paint_DrawNum(10, 50, 987654321, &Font16, WHITE, BLACK);
+    Paint_DrawString_CN(130, 0, " ???abc", &Font12CN, BLACK, WHITE);
+    Paint_DrawString_CN(130, 20, "??????", &Font24CN, WHITE, BLACK);
+
+    printf("EPD_Display\r\n");
+    // EPD_4IN2_V2_Display(BlackImage);
+	EPD_4IN2_V2_Display(BlackImage);
+	DEV_Delay_ms(2000);
+#endif
+
+#if 1
+	printf("Partial refresh\r\n");
+    Paint_NewImage(BlackImage, 120, 50, 0, WHITE);
+	PAINT_TIME sPaint_time;
+    sPaint_time.Hour = 12;
+    sPaint_time.Min = 34;
+    sPaint_time.Sec = 56;
+    UBYTE num = 10;
+	for (;;) {
+		sPaint_time.Sec = sPaint_time.Sec + 1;
+		if (sPaint_time.Sec == 60) {
+			sPaint_time.Min = sPaint_time.Min + 1;
+			sPaint_time.Sec = 0;
+			if (sPaint_time.Min == 60) {
+				sPaint_time.Hour =  sPaint_time.Hour + 1;
+				sPaint_time.Min = 0;
+				if (sPaint_time.Hour == 24) {
+					sPaint_time.Hour = 0;
+					sPaint_time.Min = 0;
+					sPaint_time.Sec = 0;
+				}
+			}
+		}
+		Paint_Clear(WHITE);
+		Paint_DrawRectangle(1, 1, 120, 50, BLACK, DOT_PIXEL_1X1, DRAW_FILL_EMPTY);
+        Paint_DrawTime(10, 15, &sPaint_time, &Font20, WHITE, BLACK);
+		EPD_4IN2_V2_PartialDisplay(BlackImage, 200, 80, 320, 130);
+		DEV_Delay_ms(500);//Analog clock 1s
+		num = num - 1;
+		if(num == 0) {
+			break;
+		}
+    }
+#endif
+
+
+#if 1
+    // EPD_4IN2_V2_Init();
+	// EPD_4IN2_V2_Clear();
+	EPD_4IN2_V2_Init_4Gray();
+	printf("show Gray------------------------\r\n");
+	free(BlackImage);
+	BlackImage = NULL;
+	Imagesize = ((EPD_4IN2_V2_WIDTH % 8 == 0)? (EPD_4IN2_V2_WIDTH / 4 ): (EPD_4IN2_V2_WIDTH / 4 + 1)) * EPD_4IN2_V2_HEIGHT;
+    if((BlackImage = (UBYTE *)malloc(Imagesize)) == NULL) {
+        printf("Failed to apply for black memory...\r\n");
+        return -1;
+    }
+	Paint_NewImage(BlackImage, EPD_4IN2_V2_WIDTH, EPD_4IN2_V2_HEIGHT, 0, WHITE);
+	Paint_SetScale(4);
+	Paint_Clear(WHITE);
+
+	Paint_DrawPoint(10, 80, BLACK, DOT_PIXEL_1X1, DOT_STYLE_DFT);
+    Paint_DrawPoint(10, 90, BLACK, DOT_PIXEL_2X2, DOT_STYLE_DFT);
+    Paint_DrawPoint(10, 100, BLACK, DOT_PIXEL_3X3, DOT_STYLE_DFT);
+    Paint_DrawLine(20, 70, 70, 120, BLACK, DOT_PIXEL_1X1, LINE_STYLE_SOLID);
+    Paint_DrawLine(70, 70, 20, 120, BLACK, DOT_PIXEL_1X1, LINE_STYLE_SOLID);
+    Paint_DrawRectangle(20, 70, 70, 120, BLACK, DOT_PIXEL_1X1, DRAW_FILL_EMPTY);
+    Paint_DrawRectangle(80, 70, 130, 120, BLACK, DOT_PIXEL_1X1, DRAW_FILL_FULL);
+    Paint_DrawCircle(45, 95, 20, BLACK, DOT_PIXEL_1X1, DRAW_FILL_EMPTY);
+    Paint_DrawCircle(105, 95, 20, WHITE, DOT_PIXEL_1X1, DRAW_FILL_FULL);
+    Paint_DrawLine(85, 95, 125, 95, BLACK, DOT_PIXEL_1X1, LINE_STYLE_DOTTED);
+    Paint_DrawLine(105, 75, 105, 115, BLACK, DOT_PIXEL_1X1, LINE_STYLE_DOTTED);
+    Paint_DrawString_EN(10, 0, "waveshare", &Font16, BLACK, WHITE);
+    Paint_DrawString_EN(10, 20, "hello world", &Font12, WHITE, BLACK);
+    Paint_DrawNum(10, 33, 123456789, &Font12, BLACK, WHITE);
+    Paint_DrawNum(10, 50, 987654321, &Font16, WHITE, BLACK);
+    Paint_DrawString_CN(140, 0, "???abc", &Font12CN, GRAY1, GRAY4);
+    Paint_DrawString_CN(140, 40, "???abc", &Font12CN, GRAY2, GRAY3);
+    Paint_DrawString_CN(140, 80, "???abc", &Font12CN, GRAY3, GRAY2);
+    Paint_DrawString_CN(140, 120, "???abc", &Font12CN, GRAY4, GRAY1);
+	
+    Paint_DrawString_CN(220, 0, "??????", &Font24CN, GRAY1, GRAY4);
+    Paint_DrawString_CN(220, 40, "??????", &Font24CN, GRAY2, GRAY3);
+    Paint_DrawString_CN(220, 80, "??????", &Font24CN, GRAY3, GRAY2);
+    Paint_DrawString_CN(220, 120, "??????", &Font24CN, GRAY4, GRAY1);
+	
+	EPD_4IN2_V2_Display_4Gray(BlackImage);
+	DEV_Delay_ms(2000);
+
+	Paint_Clear(WHITE);
+    Paint_DrawBitMap(gImage_4in2_4Gray1);
+    EPD_4IN2_V2_Display_4Gray(BlackImage);
+	DEV_Delay_ms(2000);
+
+#endif
+
+
+#if 0
+
+    free(BlackImage);
+    BlackImage = NULL;  
+    Imagesize = ((EPD_4IN2_V2_WIDTH % 8 == 0)? (EPD_4IN2_V2_WIDTH / 4 ): (EPD_4IN2_V2_WIDTH / 4 + 1)) * EPD_4IN2_V2_HEIGHT;
+    if((BlackImage = (UBYTE *)malloc(Imagesize)) == NULL) {
+        printf("Failed to apply for black memory...\r\n");
+        return -1;
+    }
+    Paint_NewImage(BlackImage, EPD_4IN2_V2_WIDTH, EPD_4IN2_V2_HEIGHT, 0, WHITE);
+	Paint_SetScale(4);
+	Paint_Clear(WHITE);
+
+    int key=0; 
+
+    gpio_set_dir(KEY0, GPIO_IN);
+    gpio_pull_up(KEY0);//Need to pull up
+
+    gpio_set_dir(KEY1, GPIO_IN);
+    gpio_pull_up(KEY1);//Need to pull up
+	
+	while(1)
+	{
+	
+		if(DEV_Digital_Read(KEY0 ) == 0 && key==0)
+	    {
+	        key=1;
+	        EPD_4IN2_V2_Init();
+	        Paint_DrawBitMap(gImage_4in2);
+	        EPD_4IN2_V2_Display(BlackImage);
+	        DEV_Delay_ms(2000);
+	    }
+	
+	    if(DEV_Digital_Read(KEY1 ) == 0 && key==0)
+	    {
+	        key=1;
+	        EPD_4IN2_V2_Init_4Gray();
+	        Paint_DrawBitMap(gImage_4in2_4Gray1);
+            EPD_4IN2_V2_Display_4Gray(BlackImage);
+	        DEV_Delay_ms(2000);
+	    }
+	    
+	    if(DEV_Digital_Read(KEY0 ) == 1 && DEV_Digital_Read(KEY1 ) == 1 && key == 1 )
+	    {
+	        key=0;
+            EPD_4IN2_V2_Init();
+	        EPD_4IN2_V2_Clear();
+	    }
+
+	}
+#endif
+
+    EPD_4IN2_V2_Init();
+    EPD_4IN2_V2_Clear();
+    printf("Goto Sleep...\r\n");
+    EPD_4IN2_V2_Sleep();
+    free(BlackImage);
+    BlackImage = NULL;
+    DEV_Delay_ms(2000);//important, at least 2s
+    // close 5V
+    printf("close 5V, Module enters 0 power consumption ...\r\n");
+    DEV_Module_Exit();
+    
+    return 0;
+}
+

Pico_ePaper_Code/c/examples/EPD_4in2_test.c

@@ -0,0 +1,227 @@
+/*****************************************************************************
+* | File      	:   EPD_4in2_test.c
+* | Author      :   Waveshare team
+* | Function    :   4.2inch e-paper test demo
+* | Info        :
+*----------------
+* |	This version:   V1.0
+* | Date        :   2019-06-13
+* | Info        :
+#
+# Permission is hereby granted, free of charge, to any person obtaining a copy
+# of this software and associated documnetation files (the "Software"), to deal
+# in the Software without restriction, including without limitation the rights
+# to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+# copies of the Software, and to permit persons to  whom the Software is
+# furished to do so, subject to the following conditions:
+#
+# The above copyright notice and this permission notice shall be included in
+# all copies or substantial portions of the Software.
+#
+# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+# FITNESS OR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+# AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+# LIABILITY WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+# OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+# THE SOFTWARE.
+#
+******************************************************************************/
+#include "EPD_Test.h"
+#include "EPD_4in2.h"
+#include <string.h>
+
+int EPD_4in2_test(void)
+{
+    printf("EPD_4IN2_test Demo\r\n");
+    if(DEV_Module_Init()!=0){
+        return -1;
+    }
+
+    printf("e-Paper Init and Clear...\r\n");
+    EPD_4IN2_Init_Fast();
+    EPD_4IN2_Clear();
+    DEV_Delay_ms(500);
+
+    //Create a new image cache
+    UBYTE *BlackImage;
+    /* you have to edit the startup_stm32fxxx.s file and set a big enough heap size */
+    UWORD Imagesize = ((EPD_4IN2_WIDTH % 8 == 0)? (EPD_4IN2_WIDTH / 8 ): (EPD_4IN2_WIDTH / 8 + 1)) * EPD_4IN2_HEIGHT;
+    if((BlackImage = (UBYTE *)malloc(Imagesize)) == NULL) {
+        printf("Failed to apply for black memory...\r\n");
+        return -1;
+    }
+    printf("Paint_NewImage\r\n");
+    Paint_NewImage(BlackImage, EPD_4IN2_WIDTH, EPD_4IN2_HEIGHT, 0, WHITE);
+    
+#if 1   // show image for array   
+    printf("show image for array\r\n");
+    Paint_SelectImage(BlackImage);
+    Paint_Clear(WHITE);
+    Paint_DrawBitMap(gImage_4in2);
+    EPD_4IN2_Display(BlackImage);
+    DEV_Delay_ms(500);
+#endif
+
+#if 1   // Drawing on the image
+    //1.Select Image
+    printf("SelectImage:BlackImage\r\n");
+    Paint_SelectImage(BlackImage);
+    Paint_Clear(WHITE);
+
+    // 2.Drawing on the image
+    printf("Drawing:BlackImage\r\n");
+    Paint_DrawPoint(10, 80, BLACK, DOT_PIXEL_1X1, DOT_STYLE_DFT);
+    Paint_DrawPoint(10, 90, BLACK, DOT_PIXEL_2X2, DOT_STYLE_DFT);
+    Paint_DrawPoint(10, 100, BLACK, DOT_PIXEL_3X3, DOT_STYLE_DFT);
+    Paint_DrawLine(20, 70, 70, 120, BLACK, DOT_PIXEL_1X1, LINE_STYLE_SOLID);
+    Paint_DrawLine(70, 70, 20, 120, BLACK, DOT_PIXEL_1X1, LINE_STYLE_SOLID);
+    Paint_DrawRectangle(20, 70, 70, 120, BLACK, DOT_PIXEL_1X1, DRAW_FILL_EMPTY);
+    Paint_DrawRectangle(80, 70, 130, 120, BLACK, DOT_PIXEL_1X1, DRAW_FILL_FULL);
+    Paint_DrawCircle(45, 95, 20, BLACK, DOT_PIXEL_1X1, DRAW_FILL_EMPTY);
+    Paint_DrawCircle(105, 95, 20, WHITE, DOT_PIXEL_1X1, DRAW_FILL_FULL);
+    Paint_DrawLine(85, 95, 125, 95, BLACK, DOT_PIXEL_1X1, LINE_STYLE_DOTTED);
+    Paint_DrawLine(105, 75, 105, 115, BLACK, DOT_PIXEL_1X1, LINE_STYLE_DOTTED);
+    Paint_DrawString_EN(10, 0, "waveshare", &Font16, BLACK, WHITE);
+    Paint_DrawString_EN(10, 20, "hello world", &Font12, WHITE, BLACK);
+    Paint_DrawNum(10, 33, 123456789, &Font12, BLACK, WHITE);
+    Paint_DrawNum(10, 50, 987654321, &Font16, WHITE, BLACK);
+    Paint_DrawString_CN(130, 0, "<EFBFBD><EFBFBD><EFBFBD>abc", &Font12CN, BLACK, WHITE);
+    Paint_DrawString_CN(130, 20, "΢ѩ<EFBFBD><EFBFBD><EFBFBD><EFBFBD>", &Font24CN, WHITE, BLACK);
+
+    printf("EPD_Display\r\n");
+    EPD_4IN2_Display(BlackImage);
+	DEV_Delay_ms(2000);
+#endif
+	
+#if 0
+    printf("Support for partial refresh, but the refresh effect is not good, but it is not recommended\r\n");
+	printf("Partial refresh\r\n");
+    EPD_4IN2_Init_Partial();
+    PAINT_TIME sPaint_time;
+    sPaint_time.Hour = 12;
+    sPaint_time.Min = 34;
+    sPaint_time.Sec = 56;
+    UBYTE num = 20;
+	for (;;) {
+		sPaint_time.Sec = sPaint_time.Sec + 1;
+		if (sPaint_time.Sec == 60) {
+			sPaint_time.Min = sPaint_time.Min + 1;
+			sPaint_time.Sec = 0;
+			if (sPaint_time.Min == 60) {
+				sPaint_time.Hour =  sPaint_time.Hour + 1;
+				sPaint_time.Min = 0;
+				if (sPaint_time.Hour == 24) {
+					sPaint_time.Hour = 0;
+					sPaint_time.Min = 0;
+					sPaint_time.Sec = 0;
+				}
+			}
+		}
+		Paint_ClearWindows(150, 80, 150 + Font20.Width * 7, 80 + Font20.Height, WHITE);
+		Paint_DrawTime(150, 80, &sPaint_time, &Font20, WHITE, BLACK);
+		EPD_4IN2_PartialDisplay(150, 80, 150 + Font20.Width * 7, 80 + Font20.Height, BlackImage);
+		DEV_Delay_ms(500);//Analog clock 1s
+		num = num - 1;
+		if(num == 0) {
+			break;
+		}
+    }
+#endif
+
+	EPD_4IN2_Init_4Gray();
+	printf("show Gray------------------------\r\n");
+	free(BlackImage);
+	BlackImage = NULL;
+	Imagesize = ((EPD_4IN2_WIDTH % 8 == 0)? (EPD_4IN2_WIDTH / 4 ): (EPD_4IN2_WIDTH / 4 + 1)) * EPD_4IN2_HEIGHT;
+    if((BlackImage = (UBYTE *)malloc(Imagesize)) == NULL) {
+        printf("Failed to apply for black memory...\r\n");
+        return -1;
+    }
+	Paint_NewImage(BlackImage, EPD_4IN2_WIDTH, EPD_4IN2_HEIGHT, 0, WHITE);
+	Paint_SetScale(4);
+	Paint_Clear(WHITE);
+	
+	Paint_DrawPoint(10, 80, BLACK, DOT_PIXEL_1X1, DOT_STYLE_DFT);
+    Paint_DrawPoint(10, 90, BLACK, DOT_PIXEL_2X2, DOT_STYLE_DFT);
+    Paint_DrawPoint(10, 100, BLACK, DOT_PIXEL_3X3, DOT_STYLE_DFT);
+    Paint_DrawLine(20, 70, 70, 120, BLACK, DOT_PIXEL_1X1, LINE_STYLE_SOLID);
+    Paint_DrawLine(70, 70, 20, 120, BLACK, DOT_PIXEL_1X1, LINE_STYLE_SOLID);
+    Paint_DrawRectangle(20, 70, 70, 120, BLACK, DOT_PIXEL_1X1, DRAW_FILL_EMPTY);
+    Paint_DrawRectangle(80, 70, 130, 120, BLACK, DOT_PIXEL_1X1, DRAW_FILL_FULL);
+    Paint_DrawCircle(45, 95, 20, BLACK, DOT_PIXEL_1X1, DRAW_FILL_EMPTY);
+    Paint_DrawCircle(105, 95, 20, WHITE, DOT_PIXEL_1X1, DRAW_FILL_FULL);
+    Paint_DrawLine(85, 95, 125, 95, BLACK, DOT_PIXEL_1X1, LINE_STYLE_DOTTED);
+    Paint_DrawLine(105, 75, 105, 115, BLACK, DOT_PIXEL_1X1, LINE_STYLE_DOTTED);
+    Paint_DrawString_EN(10, 0, "waveshare", &Font16, BLACK, WHITE);
+    Paint_DrawString_EN(10, 20, "hello world", &Font12, WHITE, BLACK);
+    Paint_DrawNum(10, 33, 123456789, &Font12, BLACK, WHITE);
+    Paint_DrawNum(10, 50, 987654321, &Font16, WHITE, BLACK);
+    Paint_DrawString_CN(140, 0, "<EFBFBD><EFBFBD><EFBFBD>abc", &Font12CN, GRAY1, GRAY4);
+    Paint_DrawString_CN(140, 40, "<EFBFBD><EFBFBD><EFBFBD>abc", &Font12CN, GRAY2, GRAY3);
+    Paint_DrawString_CN(140, 80, "<EFBFBD><EFBFBD><EFBFBD>abc", &Font12CN, GRAY3, GRAY2);
+    Paint_DrawString_CN(140, 120, "<EFBFBD><EFBFBD><EFBFBD>abc", &Font12CN, GRAY4, GRAY1);
+	
+    Paint_DrawString_CN(220, 0, "΢ѩ<EFBFBD><EFBFBD><EFBFBD><EFBFBD>", &Font24CN, GRAY1, GRAY4);
+    Paint_DrawString_CN(220, 40, "΢ѩ<EFBFBD><EFBFBD><EFBFBD><EFBFBD>", &Font24CN, GRAY2, GRAY3);
+    Paint_DrawString_CN(220, 80, "΢ѩ<EFBFBD><EFBFBD><EFBFBD><EFBFBD>", &Font24CN, GRAY3, GRAY2);
+    Paint_DrawString_CN(220, 120, "΢ѩ<EFBFBD><EFBFBD><EFBFBD><EFBFBD>", &Font24CN, GRAY4, GRAY1);
+    
+    EPD_4IN2_4GrayDisplay(BlackImage);
+	DEV_Delay_ms(500);
+	
+	EPD_4IN2_Clear();
+    
+#if 0
+
+    int key=0; 
+
+    gpio_set_dir(KEY0, GPIO_IN);
+    gpio_pull_up(KEY0);//Need to pull up
+
+    gpio_set_dir(KEY1, GPIO_IN);
+    gpio_pull_up(KEY1);//Need to pull up
+	
+	while(1)
+	{
+	
+		if(DEV_Digital_Read(KEY0 ) == 0 && key==0)
+	    {
+	        key=1;
+	        EPD_4IN2_Init();
+	        Paint_DrawBitMap(gImage_4in2);
+	        EPD_4IN2_Display(BlackImage);
+	        DEV_Delay_ms(2000);
+	    }
+	
+	    if(DEV_Digital_Read(KEY1 ) == 0 && key==0)
+	    {
+	        key=1;
+	        EPD_4IN2_Init_4Gray();
+	        EPD_4IN2_4GrayDisplay(gImage_4in2_4Gray);
+	        DEV_Delay_ms(2000);
+	    }
+	    
+	    if(DEV_Digital_Read(KEY0 ) == 1 && DEV_Digital_Read(KEY1 ) == 1 && key == 1 )
+	    {
+	        key=0;
+	        EPD_4IN2_Clear();
+	    }
+
+	}
+#endif
+	EPD_4IN2_Init_Fast();
+	EPD_4IN2_Clear();
+	
+    printf("Goto Sleep...\r\n");
+    EPD_4IN2_Sleep();
+    free(BlackImage);
+    BlackImage = NULL;
+	
+    // close 5V
+    printf("close 5V, Module enters 0 power consumption ...\r\n");
+    DEV_Module_Exit();
+    
+    return 0;
+}
+

Pico_ePaper_Code/c/examples/EPD_4in2b_V2_test.c

@@ -0,0 +1,191 @@
+/*****************************************************************************
+* | File      	:   EPD_4in2b_V2_test.c
+* | Author      :   Waveshare team
+* | Function    :   4.2inch B V2 e-paper test demo
+* | Info        :
+*----------------
+* |	This version:   V1.0
+* | Date        :   2020-11-25
+* | Info        :
+#
+# Permission is hereby granted, free of charge, to any person obtaining a copy
+# of this software and associated documnetation files (the "Software"), to deal
+# in the Software without restriction, including without limitation the rights
+# to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+# copies of the Software, and to permit persons to  whom the Software is
+# furished to do so, subject to the following conditions:
+#
+# The above copyright notice and this permission notice shall be included in
+# all copies or substantial portions of the Software.
+#
+# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+# FITNESS OR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+# AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+# LIABILITY WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+# OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+# THE SOFTWARE.
+#
+******************************************************************************/
+#include "EPD_Test.h"
+#include "EPD_4in2b_V2.h"
+
+int EPD_4in2b_V2_test(void)
+{
+    printf("EPD_4IN2B_V2_test Demo\r\n");
+    if(DEV_Module_Init()!=0){
+        return -1;
+    }
+
+    printf("e-Paper Init and Clear...\r\n");
+    EPD_4IN2B_V2_Init();
+    EPD_4IN2B_V2_Clear();
+    DEV_Delay_ms(500);
+
+    //Create a new image cache named IMAGE_BW and fill it with white
+    UBYTE *BlackImage, *RYImage; // Red or Yellow
+    UWORD Imagesize = ((EPD_4IN2B_V2_WIDTH % 8 == 0)? (EPD_4IN2B_V2_WIDTH / 8 ): (EPD_4IN2B_V2_WIDTH / 8 + 1)) * EPD_4IN2B_V2_HEIGHT;
+    if((BlackImage = (UBYTE *)malloc(Imagesize)) == NULL) {
+        printf("Failed to apply for black memory...\r\n");
+        return -1;
+    }
+    if((RYImage = (UBYTE *)malloc(Imagesize)) == NULL) {
+        printf("Failed to apply for red memory...\r\n");
+        return -1;
+    }
+    printf("NewImage:BlackImage and RYImage\r\n");
+    Paint_NewImage(BlackImage, EPD_4IN2B_V2_WIDTH, EPD_4IN2B_V2_HEIGHT, 180, WHITE);
+    Paint_NewImage(RYImage, EPD_4IN2B_V2_WIDTH, EPD_4IN2B_V2_HEIGHT, 180, WHITE);
+
+    //Select Image
+    Paint_SelectImage(BlackImage);
+    Paint_Clear(WHITE);
+    Paint_SelectImage(RYImage);
+    Paint_Clear(WHITE);
+ 
+#if 1   // show image for array    
+    printf("show image for array\r\n");
+    EPD_4IN2B_V2_Display(gImage_4in2bc_b, gImage_4in2bc_ry);
+    DEV_Delay_ms(2000);
+#endif
+
+#if 1   // Drawing on the image
+    /*Horizontal screen*/
+    //1.Draw black image
+    printf("Draw black image\r\n");
+    Paint_SelectImage(BlackImage);
+    Paint_Clear(WHITE);
+    Paint_DrawPoint(10, 80, BLACK, DOT_PIXEL_1X1, DOT_STYLE_DFT);
+    Paint_DrawPoint(10, 90, BLACK, DOT_PIXEL_2X2, DOT_STYLE_DFT);
+    Paint_DrawPoint(10, 100, BLACK, DOT_PIXEL_3X3, DOT_STYLE_DFT);
+    Paint_DrawPoint(10, 110, BLACK, DOT_PIXEL_3X3, DOT_STYLE_DFT);
+    Paint_DrawLine(20, 70, 70, 120, BLACK, DOT_PIXEL_1X1, LINE_STYLE_SOLID);
+    Paint_DrawLine(70, 70, 20, 120, BLACK, DOT_PIXEL_1X1, LINE_STYLE_SOLID);      
+    Paint_DrawRectangle(20, 70, 70, 120, BLACK, DOT_PIXEL_1X1, DRAW_FILL_EMPTY);
+    Paint_DrawRectangle(80, 70, 130, 120, BLACK, DOT_PIXEL_1X1, DRAW_FILL_FULL);
+    Paint_DrawString_EN(10, 0, "waveshare", &Font16, BLACK, WHITE);    
+    Paint_DrawString_CN(130, 20, "΢ѩ<EFBFBD><EFBFBD><EFBFBD><EFBFBD>", &Font24CN, WHITE, BLACK);
+    Paint_DrawNum(10, 50, 987654321, &Font16, WHITE, BLACK);
+    
+    //2.Draw red image
+    printf("Draw red image\r\n");
+    Paint_SelectImage(RYImage);
+    Paint_Clear(WHITE);
+    Paint_DrawCircle(160, 95, 20, BLACK, DOT_PIXEL_1X1, DRAW_FILL_EMPTY);
+    Paint_DrawCircle(210, 95, 20, BLACK, DOT_PIXEL_1X1, DRAW_FILL_FULL);
+    Paint_DrawLine(85, 95, 125, 95, BLACK, DOT_PIXEL_1X1, LINE_STYLE_DOTTED);
+    Paint_DrawLine(105, 75, 105, 115, BLACK, DOT_PIXEL_1X1, LINE_STYLE_DOTTED);  
+    Paint_DrawString_CN(130, 0,"<EFBFBD><EFBFBD><EFBFBD><EFBFBD>abc", &Font12CN, BLACK, WHITE);
+    Paint_DrawString_EN(10, 20, "hello world", &Font12, WHITE, BLACK);
+    Paint_DrawNum(10, 33, 123456789, &Font12, BLACK, WHITE);
+
+    printf("EPD_Display\r\n");
+    EPD_4IN2B_V2_Display(BlackImage, RYImage);
+    DEV_Delay_ms(2000);
+    
+    EPD_4IN2B_V2_Clear();
+#endif
+
+#if 1
+
+    int key=0; 
+
+    gpio_set_dir(KEY0, GPIO_IN);
+    gpio_pull_up(KEY0);//Need to pull up
+
+    gpio_set_dir(KEY1, GPIO_IN);
+    gpio_pull_up(KEY1);//Need to pull up
+	
+	while(1)
+	{
+	
+		if(DEV_Digital_Read(KEY0 ) == 0 && key==0)
+	    {
+	        key=1;
+	        printf("show image for array\r\n");
+		    EPD_4IN2B_V2_Display(gImage_4in2bc_b, gImage_4in2bc_ry);
+		    DEV_Delay_ms(2000);
+	    }
+	
+	    if(DEV_Digital_Read(KEY1 ) == 0 && key==0)
+	    {
+	        key=1;
+	        //1.Draw black image
+		    printf("Draw black image\r\n");
+		    Paint_SelectImage(BlackImage);
+		    Paint_Clear(WHITE);
+		    Paint_DrawPoint(10, 80, BLACK, DOT_PIXEL_1X1, DOT_STYLE_DFT);
+		    Paint_DrawPoint(10, 90, BLACK, DOT_PIXEL_2X2, DOT_STYLE_DFT);
+		    Paint_DrawPoint(10, 100, BLACK, DOT_PIXEL_3X3, DOT_STYLE_DFT);
+		    Paint_DrawPoint(10, 110, BLACK, DOT_PIXEL_3X3, DOT_STYLE_DFT);
+		    Paint_DrawLine(20, 70, 70, 120, BLACK, DOT_PIXEL_1X1, LINE_STYLE_SOLID);
+		    Paint_DrawLine(70, 70, 20, 120, BLACK, DOT_PIXEL_1X1, LINE_STYLE_SOLID);      
+		    Paint_DrawRectangle(20, 70, 70, 120, BLACK, DOT_PIXEL_1X1, DRAW_FILL_EMPTY);
+		    Paint_DrawRectangle(80, 70, 130, 120, BLACK, DOT_PIXEL_1X1, DRAW_FILL_FULL);
+		    Paint_DrawString_EN(10, 0, "waveshare", &Font16, BLACK, WHITE);    
+		    Paint_DrawString_CN(130, 20, "΢ѩ<EFBFBD><EFBFBD><EFBFBD><EFBFBD>", &Font24CN, WHITE, BLACK);
+		    Paint_DrawNum(10, 50, 987654321, &Font16, WHITE, BLACK);
+		    
+		    //2.Draw red image
+		    printf("Draw red image\r\n");
+		    Paint_SelectImage(RYImage);
+		    Paint_Clear(WHITE);
+		    Paint_DrawCircle(160, 95, 20, BLACK, DOT_PIXEL_1X1, DRAW_FILL_EMPTY);
+		    Paint_DrawCircle(210, 95, 20, BLACK, DOT_PIXEL_1X1, DRAW_FILL_FULL);
+		    Paint_DrawLine(85, 95, 125, 95, BLACK, DOT_PIXEL_1X1, LINE_STYLE_DOTTED);
+		    Paint_DrawLine(105, 75, 105, 115, BLACK, DOT_PIXEL_1X1, LINE_STYLE_DOTTED);  
+		    Paint_DrawString_CN(130, 0,"<EFBFBD><EFBFBD><EFBFBD><EFBFBD>abc", &Font12CN, BLACK, WHITE);
+		    Paint_DrawString_EN(10, 20, "hello world", &Font12, WHITE, BLACK);
+		    Paint_DrawNum(10, 33, 123456789, &Font12, BLACK, WHITE);
+		
+		    printf("EPD_Display\r\n");
+		    EPD_4IN2B_V2_Display(BlackImage, RYImage);
+		    DEV_Delay_ms(2000);
+	    }
+	    
+	    if(DEV_Digital_Read(KEY0 ) == 1 && DEV_Digital_Read(KEY1 ) == 1 && key == 1 )
+	    {
+	        key=0;
+	        EPD_4IN2B_V2_Clear();
+	    }
+
+	}
+#endif
+
+    printf("Clear...\r\n");
+    EPD_4IN2B_V2_Clear();
+
+    printf("Goto Sleep...\r\n");
+    EPD_4IN2B_V2_Sleep();
+    free(BlackImage);
+    free(RYImage);
+    BlackImage = NULL;
+    RYImage = NULL;
+    DEV_Delay_ms(2000);//important, at least 2s
+    // close 5V
+    printf("close 5V, Module enters 0 power consumption ...\r\n");
+    DEV_Module_Exit();
+    
+    return 0;
+}
+

Pico_ePaper_Code/c/examples/EPD_4in2b_V2_test_old.c

@@ -0,0 +1,122 @@
+/*****************************************************************************
+* | File      	:   EPD_4in2b_V2_test.c
+* | Author      :   Waveshare team
+* | Function    :   4.2inch B V2 e-paper test demo
+* | Info        :
+*----------------
+* |	This version:   V1.0
+* | Date        :   2020-04-23
+* | Info        :
+#
+# Permission is hereby granted, free of charge, to any person obtaining a copy
+# of this software and associated documnetation files (the "Software"), to deal
+# in the Software without restriction, including without limitation the rights
+# to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+# copies of the Software, and to permit persons to  whom the Software is 
+# furished to do so, subject to the following conditions:
+#
+# The above copyright notice and this permission notice shall be included in
+# all copies or substantial portions of the Software.
+#
+# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+# FITNESS OR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+# AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+# LIABILITY WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+# OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+# THE SOFTWARE.
+#
+******************************************************************************/
+#include "EPD_Test.h"
+#include "EPD_4in2b_V2_old.h"
+
+int EPD_4in2b_V2_test_old(void)
+{
+    printf("EPD_4IN2B_V2_test Demo\r\n");
+    if(DEV_Module_Init()!=0){
+        return -1;
+    }
+
+    printf("e-Paper Init and Clear...\r\n");
+    EPD_4IN2B_V2_Init_1();
+    EPD_4IN2B_V2_Clear_1();
+    DEV_Delay_ms(500);
+
+    //Create a new image cache named IMAGE_BW and fill it with white
+    UBYTE *BlackImage, *RYImage; // Red or Yellow
+    UWORD Imagesize = ((EPD_4IN2B_V2_WIDTH % 8 == 0)? (EPD_4IN2B_V2_WIDTH / 8 ): (EPD_4IN2B_V2_WIDTH / 8 + 1)) * EPD_4IN2B_V2_HEIGHT;
+    if((BlackImage = (UBYTE *)malloc(Imagesize)) == NULL) {
+        printf("Failed to apply for black memory...\r\n");
+        return -1;
+    }
+    if((RYImage = (UBYTE *)malloc(Imagesize)) == NULL) {
+        printf("Failed to apply for red memory...\r\n");
+        return -1;
+    }
+    printf("NewImage:BlackImage and RYImage\r\n");
+    Paint_NewImage(BlackImage, EPD_4IN2B_V2_WIDTH, EPD_4IN2B_V2_HEIGHT, 180, WHITE);
+    Paint_NewImage(RYImage, EPD_4IN2B_V2_WIDTH, EPD_4IN2B_V2_HEIGHT, 180, WHITE);
+
+    //Select Image
+    Paint_SelectImage(BlackImage);
+    Paint_Clear(WHITE);
+    Paint_SelectImage(RYImage);
+    Paint_Clear(WHITE);
+#if 1   // show image for array    
+    printf("show image for array\r\n");
+    EPD_4IN2B_V2_Display_1(gImage_4in2bc_b, gImage_4in2bc_ry);
+    DEV_Delay_ms(2000);
+#endif
+
+#if 1   // Drawing on the image
+    /*Horizontal screen*/
+    //1.Draw black image
+    printf("Draw black image\r\n");
+    Paint_SelectImage(BlackImage);
+    Paint_Clear(WHITE);
+    Paint_DrawPoint(10, 80, BLACK, DOT_PIXEL_1X1, DOT_STYLE_DFT);
+    Paint_DrawPoint(10, 90, BLACK, DOT_PIXEL_2X2, DOT_STYLE_DFT);
+    Paint_DrawPoint(10, 100, BLACK, DOT_PIXEL_3X3, DOT_STYLE_DFT);
+    Paint_DrawPoint(10, 110, BLACK, DOT_PIXEL_3X3, DOT_STYLE_DFT);
+    Paint_DrawLine(20, 70, 70, 120, BLACK, DOT_PIXEL_1X1, LINE_STYLE_SOLID);
+    Paint_DrawLine(70, 70, 20, 120, BLACK, DOT_PIXEL_1X1, LINE_STYLE_SOLID);      
+    Paint_DrawRectangle(20, 70, 70, 120, BLACK, DOT_PIXEL_1X1, DRAW_FILL_EMPTY);
+    Paint_DrawRectangle(80, 70, 130, 120, BLACK, DOT_PIXEL_1X1, DRAW_FILL_FULL);
+    Paint_DrawString_EN(10, 0, "waveshare", &Font16, BLACK, WHITE);    
+    Paint_DrawString_CN(130, 20, "΢ѩ<EFBFBD><EFBFBD><EFBFBD><EFBFBD>", &Font24CN, WHITE, BLACK);
+    Paint_DrawNum(10, 50, 987654321, &Font16, WHITE, BLACK);
+    
+    //2.Draw red image
+    printf("Draw red image\r\n");
+    Paint_SelectImage(RYImage);
+    Paint_Clear(WHITE);
+    Paint_DrawCircle(160, 95, 20, BLACK, DOT_PIXEL_1X1, DRAW_FILL_EMPTY);
+    Paint_DrawCircle(210, 95, 20, BLACK, DOT_PIXEL_1X1, DRAW_FILL_FULL);
+    Paint_DrawLine(85, 95, 125, 95, BLACK, DOT_PIXEL_1X1, LINE_STYLE_DOTTED);
+    Paint_DrawLine(105, 75, 105, 115, BLACK, DOT_PIXEL_1X1, LINE_STYLE_DOTTED);  
+    Paint_DrawString_CN(130, 0,"<EFBFBD><EFBFBD><EFBFBD><EFBFBD>abc", &Font12CN, BLACK, WHITE);
+    Paint_DrawString_EN(10, 20, "hello world", &Font12, WHITE, BLACK);
+    Paint_DrawNum(10, 33, 123456789, &Font12, BLACK, WHITE);
+
+    printf("EPD_Display\r\n");
+    EPD_4IN2B_V2_Display_1(BlackImage, RYImage);
+    DEV_Delay_ms(2000);
+#endif
+
+    printf("Clear...\r\n");
+    EPD_4IN2B_V2_Clear_1();
+
+    printf("Goto Sleep...\r\n");
+    EPD_4IN2B_V2_Sleep_1();
+    free(BlackImage);
+    free(RYImage);
+    BlackImage = NULL;
+    RYImage = NULL;
+    DEV_Delay_ms(2000);//important, at least 2s
+    // close 5V
+    printf("close 5V, Module enters 0 power consumption ...\r\n");
+    DEV_Module_Exit();
+    
+    return 0;
+}
+

Pico_ePaper_Code/c/examples/EPD_5in65f_test.c

@@ -0,0 +1,195 @@
+/*****************************************************************************
+* | File      	:   EPD_2IN9_V2_test.c
+* | Author      :   Waveshare team
+* | Function    :   2.9inch e-paper V2 test demo
+* | Info        :
+*----------------
+* |	This version:   V1.0
+* | Date        :   2021-06-03
+* | Info        :
+#
+# Permission is hereby granted, free of charge, to any person obtaining a copy
+# of this software and associated documnetation files (the "Software"), to deal
+# in the Software without restriction, including without limitation the rights
+# to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+# copies of the Software, and to permit persons to  whom the Software is
+# furished to do so, subject to the following conditions:
+#
+# The above copyright notice and this permission notice shall be included in
+# all copies or substantial portions of the Software.
+#
+# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+# FITNESS OR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+# AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+# LIABILITY WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+# OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+# THE SOFTWARE.
+#
+******************************************************************************/
+#include "EPD_5in65f.h"
+#include "EPD_Test.h"
+
+int EPD_5in65f_test(void)
+{
+	printf("EPD_5in65F_test Demo\r\n");
+    if(DEV_Module_Init()!=0){
+        return -1;
+    }
+
+	printf("e-Paper Init and Clear...\r\n");
+	EPD_5IN65F_Init();
+	EPD_5IN65F_Clear(EPD_5IN65F_WHITE);
+	DEV_Delay_ms(100);
+				
+	UBYTE *BlackImage;
+    /* you have to edit the startup_stm32fxxx.s file and set a big enough heap size */
+	UDOUBLE Imagesize = ((EPD_5IN65F_WIDTH % 2 == 0)? (EPD_5IN65F_WIDTH / 2 ): (EPD_5IN65F_WIDTH / 2 + 1)) * EPD_5IN65F_HEIGHT;
+	Imagesize = Imagesize/4;
+	printf("Not enough memory, only part of the window is displayed\r\n");
+	printf("Imagesize %d\r\n",Imagesize);
+	if((BlackImage = (UBYTE *)malloc(Imagesize)) == NULL) {
+			printf("Failed to apply for black memory...\r\n");
+			return -1;
+	}
+	Paint_NewImage(BlackImage, EPD_5IN65F_WIDTH/2, EPD_5IN65F_HEIGHT/2, 0, EPD_5IN65F_WHITE);
+	Paint_SetScale(7);
+
+#if 0
+    printf("show image for array\r\n");
+
+	EPD_5IN65F_Display(flagimage);
+
+    DEV_Delay_ms(4000);
+#endif
+
+#if 0
+	EPD_5IN65F_Display(gImage_5in65f);
+	//EPD_5IN65F_Display_part(gImage_5in65f, 204, 153, 192, 143);
+	DEV_Delay_ms(5000); 
+#endif
+	
+#if 1
+	Paint_Clear(EPD_5IN65F_GREEN);
+	printf("Drawing:BlackImage\r\n");
+	Paint_DrawPoint(10, 80, BLACK, DOT_PIXEL_1X1, DOT_STYLE_DFT);
+	Paint_DrawPoint(10, 90, BLACK, DOT_PIXEL_2X2, DOT_STYLE_DFT);
+	Paint_DrawPoint(10, 100, BLACK, DOT_PIXEL_3X3, DOT_STYLE_DFT);
+	Paint_DrawLine(20, 70, 70, 120, BLACK, DOT_PIXEL_1X1, LINE_STYLE_SOLID);
+	Paint_DrawLine(70, 70, 20, 120, BLACK, DOT_PIXEL_1X1, LINE_STYLE_SOLID);
+	Paint_DrawRectangle(20, 70, 70, 120, BLACK, DOT_PIXEL_1X1, DRAW_FILL_EMPTY);
+	Paint_DrawRectangle(80, 70, 130, 120, BLACK, DOT_PIXEL_1X1, DRAW_FILL_FULL);
+	Paint_DrawCircle(45, 95, 20, BLACK, DOT_PIXEL_1X1, DRAW_FILL_EMPTY);
+	Paint_DrawCircle(105, 95, 20, WHITE, DOT_PIXEL_1X1, DRAW_FILL_FULL);
+	Paint_DrawLine(85, 95, 125, 95, BLACK, DOT_PIXEL_1X1, LINE_STYLE_DOTTED);
+	Paint_DrawLine(105, 75, 105, 115, BLACK, DOT_PIXEL_1X1, LINE_STYLE_DOTTED);
+	Paint_DrawString_EN(10, 0, "waveshare", &Font16, BLACK, WHITE);
+	Paint_DrawString_EN(10, 20, "hello world", &Font12, WHITE, BLACK);
+	Paint_DrawNum(10, 33, 123456789, &Font12, BLACK, WHITE);
+	Paint_DrawNum(10, 50, 987654321, &Font16, WHITE, BLACK);
+	Paint_DrawString_CN(10, 120, "<EFBFBD>A<EFBFBD>nabc", &Font12CN, EPD_5IN65F_BLACK, WHITE);
+	Paint_DrawString_CN(10, 140, "<EFBFBD>A<EFBFBD>nabc", &Font12CN, EPD_5IN65F_GREEN, WHITE);
+	Paint_DrawString_CN(10, 160, "<EFBFBD>A<EFBFBD>nabc", &Font12CN, EPD_5IN65F_BLUE, WHITE);
+	Paint_DrawString_CN(10, 180, "<EFBFBD>A<EFBFBD>nabc", &Font12CN, EPD_5IN65F_RED, WHITE);
+	Paint_DrawString_CN(10, 200, "<EFBFBD>A<EFBFBD>nabc", &Font12CN, EPD_5IN65F_ORANGE, WHITE);
+	
+	Paint_DrawString_CN(150, 0, "<EFBFBD>L<EFBFBD><EFBFBD>?<3F>l", &Font24CN, WHITE, BLACK);
+	Paint_DrawString_CN(150, 40, "<EFBFBD>L<EFBFBD><EFBFBD>?<3F>l", &Font24CN, EPD_5IN65F_GREEN, BLACK);
+	Paint_DrawString_CN(150, 80, "<EFBFBD>L<EFBFBD><EFBFBD>?<3F>l", &Font24CN, EPD_5IN65F_BLUE, BLACK);
+	Paint_DrawString_CN(150, 120, "<EFBFBD>L<EFBFBD><EFBFBD>?<3F>l", &Font24CN, EPD_5IN65F_RED, BLACK);
+	Paint_DrawString_CN(150, 160, "<EFBFBD>L<EFBFBD><EFBFBD>?<3F>l", &Font24CN, EPD_5IN65F_YELLOW, BLACK);
+	
+	EPD_5IN65F_Display_part(BlackImage, 0, 0, 300, 224);
+	DEV_Delay_ms(2000); 
+	EPD_5IN65F_Clear(EPD_5IN65F_WHITE);
+#endif
+
+#if 1 
+
+    int key=0; 
+
+    gpio_set_dir(KEY0, GPIO_IN);
+    gpio_pull_up(KEY0);//Need to pull up
+
+    gpio_set_dir(KEY1, GPIO_IN);
+    gpio_pull_up(KEY1);//Need to pull up
+
+    gpio_set_dir(KEY2, GPIO_IN);
+    gpio_pull_up(KEY2);//Need to pull up
+    while(1)
+    {
+        if(DEV_Digital_Read(KEY0 ) == 0 && key==0)
+        {
+            key=1;
+            EPD_5IN65F_Display(flagimage);
+            DEV_Delay_ms(3000);
+        }
+
+        if(DEV_Digital_Read(KEY1 ) == 0 && key==0)
+        {
+            key=1;
+            EPD_5IN65F_Display(gImage_5in65f);
+            DEV_Delay_ms(3000);
+        }
+
+        if(DEV_Digital_Read(KEY2 ) == 0 && key==0)
+        {
+            key=1;
+            Paint_Clear(EPD_5IN65F_GREEN);
+			printf("Drawing:BlackImage\r\n");
+			Paint_DrawPoint(10, 80, BLACK, DOT_PIXEL_1X1, DOT_STYLE_DFT);
+			Paint_DrawPoint(10, 90, BLACK, DOT_PIXEL_2X2, DOT_STYLE_DFT);
+			Paint_DrawPoint(10, 100, BLACK, DOT_PIXEL_3X3, DOT_STYLE_DFT);
+			Paint_DrawLine(20, 70, 70, 120, BLACK, DOT_PIXEL_1X1, LINE_STYLE_SOLID);
+			Paint_DrawLine(70, 70, 20, 120, BLACK, DOT_PIXEL_1X1, LINE_STYLE_SOLID);
+			Paint_DrawRectangle(20, 70, 70, 120, BLACK, DOT_PIXEL_1X1, DRAW_FILL_EMPTY);
+			Paint_DrawRectangle(80, 70, 130, 120, BLACK, DOT_PIXEL_1X1, DRAW_FILL_FULL);
+			Paint_DrawCircle(45, 95, 20, BLACK, DOT_PIXEL_1X1, DRAW_FILL_EMPTY);
+			Paint_DrawCircle(105, 95, 20, WHITE, DOT_PIXEL_1X1, DRAW_FILL_FULL);
+			Paint_DrawLine(85, 95, 125, 95, BLACK, DOT_PIXEL_1X1, LINE_STYLE_DOTTED);
+			Paint_DrawLine(105, 75, 105, 115, BLACK, DOT_PIXEL_1X1, LINE_STYLE_DOTTED);
+			Paint_DrawString_EN(10, 0, "waveshare", &Font16, BLACK, WHITE);
+			Paint_DrawString_EN(10, 20, "hello world", &Font12, WHITE, BLACK);
+			Paint_DrawNum(10, 33, 123456789, &Font12, BLACK, WHITE);
+			Paint_DrawNum(10, 50, 987654321, &Font16, WHITE, BLACK);
+			Paint_DrawString_CN(10, 120, "<EFBFBD>A<EFBFBD>nabc", &Font12CN, EPD_5IN65F_BLACK, WHITE);
+			Paint_DrawString_CN(10, 140, "<EFBFBD>A<EFBFBD>nabc", &Font12CN, EPD_5IN65F_GREEN, WHITE);
+			Paint_DrawString_CN(10, 160, "<EFBFBD>A<EFBFBD>nabc", &Font12CN, EPD_5IN65F_BLUE, WHITE);
+			Paint_DrawString_CN(10, 180, "<EFBFBD>A<EFBFBD>nabc", &Font12CN, EPD_5IN65F_RED, WHITE);
+			Paint_DrawString_CN(10, 200, "<EFBFBD>A<EFBFBD>nabc", &Font12CN, EPD_5IN65F_ORANGE, WHITE);
+			
+			Paint_DrawString_CN(150, 0, "<EFBFBD>L<EFBFBD><EFBFBD>?<3F>l", &Font24CN, WHITE, BLACK);
+			Paint_DrawString_CN(150, 40, "<EFBFBD>L<EFBFBD><EFBFBD>?<3F>l", &Font24CN, EPD_5IN65F_GREEN, BLACK);
+			Paint_DrawString_CN(150, 80, "<EFBFBD>L<EFBFBD><EFBFBD>?<3F>l", &Font24CN, EPD_5IN65F_BLUE, BLACK);
+			Paint_DrawString_CN(150, 120, "<EFBFBD>L<EFBFBD><EFBFBD>?<3F>l", &Font24CN, EPD_5IN65F_RED, BLACK);
+			Paint_DrawString_CN(150, 160, "<EFBFBD>L<EFBFBD><EFBFBD>?<3F>l", &Font24CN, EPD_5IN65F_YELLOW, BLACK);
+			
+			EPD_5IN65F_Display_part(BlackImage, 0, 0, 300, 224);
+            DEV_Delay_ms(3000);
+        }
+
+        if(DEV_Digital_Read(KEY0 ) == 1&&DEV_Digital_Read(KEY1 ) == 1&&DEV_Digital_Read(KEY2 ) == 1 && key == 1 )
+        {
+            key=0;
+            EPD_5IN65F_Clear(EPD_5IN65F_WHITE);
+        }
+            
+    }
+
+#endif
+ 
+	printf("e-Paper Clear...\r\n");
+	EPD_5IN65F_Clear(EPD_5IN65F_WHITE);
+	DEV_Delay_ms(1000); 
+	EPD_5IN65F_Sleep();
+	
+	free(BlackImage);
+	BlackImage = NULL;
+
+	// close 5V
+	printf("close 5V, Module enters 0 power consumption ...\r\n");
+	DEV_Module_Exit();
+	
+	return 0;
+}
+

Pico_ePaper_Code/c/examples/EPD_5in83_V2_test.c

@@ -0,0 +1,110 @@
+/*****************************************************************************
+* | File      	:   EPD_5in83_V2_test.c
+* | Author      :   Waveshare team
+* | Function    :   5.83inch e-paper test demo
+* | Info        :
+*----------------
+* |	This version:   V1.0
+* | Date        :   2020-11-23
+* | Info        :
+#
+# Permission is hereby granted, free of charge, to any person obtaining a copy
+# of this software and associated documnetation files (the "Software"), to deal
+# in the Software without restriction, including without limitation the rights
+# to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+# copies of the Software, and to permit persons to  whom the Software is
+# furished to do so, subject to the following conditions:
+#
+# The above copyright notice and this permission notice shall be included in
+# all copies or substantial portions of the Software.
+#
+# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+# FITNESS OR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+# AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+# LIABILITY WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+# OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+# THE SOFTWARE.
+#
+******************************************************************************/
+#include "EPD_Test.h"
+#include "EPD_5in83_V2.h"
+
+int EPD_5in83_V2_test(void)
+{
+    printf("EPD_5IN83_V2_test Demo\r\n");
+    if(DEV_Module_Init()!=0){
+        return -1;
+    }
+
+    printf("e-Paper Init and Clear...\r\n");
+    EPD_5in83_V2_Init();
+    EPD_5in83_V2_Clear();
+    DEV_Delay_ms(500);
+
+    //Create a new image cache
+    UBYTE *BlackImage;
+    /* you have to edit the startup_stm32fxxx.s file and set a big enough heap size */
+    UWORD Imagesize = ((EPD_5in83_V2_WIDTH % 8 == 0)? (EPD_5in83_V2_WIDTH / 8 ): (EPD_5in83_V2_WIDTH / 8 + 1)) * EPD_5in83_V2_HEIGHT;
+    if((BlackImage = (UBYTE *)malloc(Imagesize)) == NULL) {
+        printf("Failed to apply for black memory...\r\n");
+        return -1;
+    }
+    printf("Paint_NewImage\r\n");
+    Paint_NewImage(BlackImage, EPD_5in83_V2_WIDTH, EPD_5in83_V2_HEIGHT, 180, WHITE); 
+
+#if 1   // show image for array   
+    printf("show image for array\r\n");
+    Paint_SelectImage(BlackImage);
+    Paint_Clear(WHITE);
+    Paint_DrawBitMap(gImage_5in83_V2);
+    EPD_5in83_V2_Display(BlackImage);
+    DEV_Delay_ms(500);
+#endif
+
+#if 1   // Drawing on the image
+    //1.Select Image
+    printf("SelectImage:BlackImage\r\n");
+    Paint_SelectImage(BlackImage);
+    Paint_Clear(WHITE);
+
+    // 2.Drawing on the image
+    printf("Drawing:BlackImage\r\n");
+    Paint_DrawPoint(10, 80, BLACK, DOT_PIXEL_1X1, DOT_STYLE_DFT);
+    Paint_DrawPoint(10, 90, BLACK, DOT_PIXEL_2X2, DOT_STYLE_DFT);
+    Paint_DrawPoint(10, 100, BLACK, DOT_PIXEL_3X3, DOT_STYLE_DFT);
+    Paint_DrawLine(20, 70, 70, 120, BLACK, DOT_PIXEL_1X1, LINE_STYLE_SOLID);
+    Paint_DrawLine(70, 70, 20, 120, BLACK, DOT_PIXEL_1X1, LINE_STYLE_SOLID);
+    Paint_DrawRectangle(20, 70, 70, 120, BLACK, DOT_PIXEL_1X1, DRAW_FILL_EMPTY);
+    Paint_DrawRectangle(80, 70, 130, 120, BLACK, DOT_PIXEL_1X1, DRAW_FILL_FULL);
+    Paint_DrawCircle(45, 95, 20, BLACK, DOT_PIXEL_1X1, DRAW_FILL_EMPTY);
+    Paint_DrawCircle(105, 95, 20, WHITE, DOT_PIXEL_1X1, DRAW_FILL_FULL);
+    Paint_DrawLine(85, 95, 125, 95, BLACK, DOT_PIXEL_1X1, LINE_STYLE_DOTTED);
+    Paint_DrawLine(105, 75, 105, 115, BLACK, DOT_PIXEL_1X1, LINE_STYLE_DOTTED);
+    Paint_DrawString_EN(10, 0, "waveshare", &Font16, BLACK, WHITE);
+    Paint_DrawString_EN(10, 20, "hello world", &Font12, WHITE, BLACK);
+    Paint_DrawNum(10, 33, 123456789, &Font12, BLACK, WHITE);
+    Paint_DrawNum(10, 50, 987654321, &Font16, WHITE, BLACK);
+    Paint_DrawString_CN(130, 0, "<EFBFBD><EFBFBD><EFBFBD><EFBFBD>Abc", &Font12CN, BLACK, WHITE);
+    Paint_DrawString_CN(130, 20, "΢ѩ<EFBFBD><EFBFBD><EFBFBD><EFBFBD>", &Font24CN, WHITE, BLACK);
+
+    printf("EPD_Display\r\n");
+    EPD_5in83_V2_Display(BlackImage);
+    DEV_Delay_ms(2000);
+#endif
+
+    printf("Clear...\r\n");
+    EPD_5in83_V2_Clear();
+
+    printf("Goto Sleep...\r\n");
+    EPD_5in83_V2_Sleep();
+    free(BlackImage);
+    BlackImage = NULL;
+    DEV_Delay_ms(2000);//important, at least 2s
+    // close 5V
+    printf("close 5V, Module enters 0 power consumption ...\r\n");
+    DEV_Module_Exit();
+    
+    return 0;
+}
+

Pico_ePaper_Code/c/examples/EPD_5in83b_V2_test.c

@@ -0,0 +1,121 @@
+/*****************************************************************************
+* | File      	:   EPD_5in83b_V2_test.c
+* | Author      :   Waveshare team
+* | Function    :   5.83inch B V2 e-paper test demo
+* | Info        :
+*----------------
+* |	This version:   V1.0
+* | Date        :   2020-07-04
+* | Info        :
+#
+# Permission is hereby granted, free of charge, to any person obtaining a copy
+# of this software and associated documnetation files (the "Software"), to deal
+# in the Software without restriction, including without limitation the rights
+# to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+# copies of the Software, and to permit persons to  whom the Software is
+# furished to do so, subject to the following conditions:
+#
+# The above copyright notice and this permission notice shall be included in
+# all copies or substantial portions of the Software.
+#
+# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+# FITNESS OR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+# AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+# LIABILITY WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+# OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+# THE SOFTWARE.
+#
+******************************************************************************/
+#include "EPD_Test.h"
+#include "EPD_5in83b_V2.h"
+
+int EPD_5in83b_V2_test(void)
+{
+    printf("EPD_5in83b_V2_test Demo\r\n");
+    if(DEV_Module_Init()!=0){
+        return -1;
+    }
+
+    printf("e-Paper Init and Clear...\r\n");
+    EPD_5IN83B_V2_Init();
+    EPD_5IN83B_V2_Clear();
+    DEV_Delay_ms(500);
+
+    //Create a new image cache named IMAGE_BW and fill it with white
+    UBYTE *BlackImage, *RYImage;
+    UWORD Imagesize = ((EPD_5IN83B_V2_WIDTH % 8 == 0)? (EPD_5IN83B_V2_WIDTH / 8 ): (EPD_5IN83B_V2_WIDTH / 8 + 1)) * EPD_5IN83B_V2_HEIGHT;
+    if((BlackImage = (UBYTE *)malloc(Imagesize)) == NULL) {
+        printf("Failed to apply for black memory...\r\n");
+        return -1;
+    }
+    if((RYImage = (UBYTE *)malloc(Imagesize)) == NULL) {
+        printf("Failed to apply for red memory...\r\n");
+        return -1;
+    }
+    printf("NewImage:BlackImage and RYImage\r\n");
+    Paint_NewImage(BlackImage, EPD_5IN83B_V2_WIDTH, EPD_5IN83B_V2_HEIGHT, 0, WHITE);
+    Paint_NewImage(RYImage, EPD_5IN83B_V2_WIDTH, EPD_5IN83B_V2_HEIGHT, 0, WHITE);
+
+    //Select Image
+    Paint_SelectImage(BlackImage);
+    Paint_Clear(WHITE);
+    Paint_SelectImage(RYImage);
+    Paint_Clear(WHITE);
+
+#if 1   // show image for array    
+    printf("show image for array\r\n");
+    EPD_5IN83B_V2_Display(gImage_5in83b_V2_b, gImage_5in83b_V2_r);
+    DEV_Delay_ms(2000);
+#endif
+
+#if 1   // Drawing on the image
+    /*Horizontal screen*/
+    //1.Draw black image
+    Paint_SelectImage(BlackImage);
+    Paint_Clear(WHITE);
+    Paint_DrawPoint(10, 80, BLACK, DOT_PIXEL_1X1, DOT_STYLE_DFT);
+    Paint_DrawPoint(10, 90, BLACK, DOT_PIXEL_2X2, DOT_STYLE_DFT);
+    Paint_DrawPoint(10, 100, BLACK, DOT_PIXEL_3X3, DOT_STYLE_DFT);
+    Paint_DrawPoint(10, 110, BLACK, DOT_PIXEL_3X3, DOT_STYLE_DFT);
+    Paint_DrawLine(20, 70, 70, 120, BLACK, DOT_PIXEL_1X1, LINE_STYLE_SOLID);
+    Paint_DrawLine(70, 70, 20, 120, BLACK, DOT_PIXEL_1X1, LINE_STYLE_SOLID);      
+    Paint_DrawRectangle(20, 70, 70, 120, BLACK, DOT_PIXEL_1X1, DRAW_FILL_EMPTY);
+    Paint_DrawRectangle(80, 70, 130, 120, BLACK, DOT_PIXEL_1X1, DRAW_FILL_FULL);
+    Paint_DrawString_EN(10, 0, "waveshare", &Font16, BLACK, WHITE);    
+    Paint_DrawString_CN(130, 20, "΢ѩ<EFBFBD><EFBFBD><EFBFBD><EFBFBD>", &Font24CN, WHITE, BLACK);
+    Paint_DrawNum(10, 50, 987654321, &Font16, WHITE, BLACK);
+    
+    //2.Draw red image
+    Paint_SelectImage(RYImage);
+    Paint_Clear(WHITE);
+    Paint_DrawCircle(160, 95, 20, BLACK, DOT_PIXEL_1X1, DRAW_FILL_EMPTY);
+    Paint_DrawCircle(210, 95, 20, BLACK, DOT_PIXEL_1X1, DRAW_FILL_FULL);
+    Paint_DrawLine(85, 95, 125, 95, BLACK, DOT_PIXEL_1X1, LINE_STYLE_DOTTED);
+    Paint_DrawLine(105, 75, 105, 115, BLACK, DOT_PIXEL_1X1, LINE_STYLE_DOTTED);  
+    Paint_DrawString_CN(130, 0,"<EFBFBD><EFBFBD><EFBFBD><EFBFBD>Abc", &Font12CN, BLACK, WHITE);
+    Paint_DrawString_EN(10, 20, "hello world", &Font12, WHITE, BLACK);
+    Paint_DrawNum(10, 33, 123456789, &Font12, BLACK, WHITE);
+    
+    printf("EPD_Display\r\n");
+    EPD_5IN83B_V2_Display(BlackImage, RYImage);
+    DEV_Delay_ms(2000);
+#endif
+
+    printf("Clear...\r\n");
+    EPD_5IN83B_V2_Clear();
+
+    printf("Goto Sleep...\r\n");
+    EPD_5IN83B_V2_Sleep();
+    free(BlackImage);
+    free(RYImage);
+    BlackImage = NULL;
+    RYImage = NULL;
+    DEV_Delay_ms(2000);//important, at least 2s
+    // close 5V
+    printf("close 5V, Module enters 0 power consumption ...\r\n");
+    DEV_Module_Exit();
+    
+    return 0;
+}
+

Pico_ePaper_Code/c/examples/EPD_7in5_V2_test.c

@@ -0,0 +1,194 @@
+/*****************************************************************************
+* | File      	:   EPD_7in5_V2_test.c
+* | Author      :   Waveshare team
+* | Function    :   7.5inch e-paper test demo
+* | Info        :
+*----------------
+* |	This version:   V1.0
+* | Date        :   2019-06-13
+* | Info        :
+#
+# Permission is hereby granted, free of charge, to any person obtaining a copy
+# of this software and associated documnetation files (the "Software"), to deal
+# in the Software without restriction, including without limitation the rights
+# to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+# copies of the Software, and to permit persons to  whom the Software is
+# furished to do so, subject to the following conditions:
+#
+# The above copyright notice and this permission notice shall be included in
+# all copies or substantial portions of the Software.
+#
+# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+# FITNESS OR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+# AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+# LIABILITY WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+# OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+# THE SOFTWARE.
+#
+******************************************************************************/
+#include "EPD_Test.h"
+#include "EPD_7in5_V2.h"
+
+int EPD_7in5_V2_test(void)
+{
+    printf("EPD_7IN5_V2_test Demo\r\n");
+    if(DEV_Module_Init()!=0){
+        return -1;
+    }
+
+    printf("e-Paper Init and Clear...\r\n");
+    EPD_7IN5_V2_Init();
+
+    EPD_7IN5_V2_Clear();
+    DEV_Delay_ms(500);
+	
+    //Create a new image cache
+    UBYTE *BlackImage;
+    /* you have to edit the startup_stm32fxxx.s file and set a big enough heap size */
+    UDOUBLE Imagesize = ((EPD_7IN5_V2_WIDTH % 8 == 0)? (EPD_7IN5_V2_WIDTH / 8 ): (EPD_7IN5_V2_WIDTH / 8 + 1)) * EPD_7IN5_V2_HEIGHT;
+    if((BlackImage = (UBYTE *)malloc(Imagesize)) == NULL) {
+        printf("Failed to apply for black memory...\r\n");
+        return -1;
+    }
+    printf("Paint_NewImage\r\n");
+    Paint_NewImage(BlackImage, EPD_7IN5_V2_WIDTH, EPD_7IN5_V2_HEIGHT, 0, WHITE);     
+
+#if 1   // show image for array   
+    EPD_7IN5_V2_Init_Fast();
+    printf("show image for array\r\n");
+    Paint_SelectImage(BlackImage);
+    Paint_Clear(WHITE);
+    Paint_DrawBitMap(gImage_7in5_V2);
+    EPD_7IN5_V2_Display(BlackImage);
+    DEV_Delay_ms(2000);
+#endif
+
+#if 1   // Drawing on the image
+    //1.Select Image
+    EPD_7IN5_V2_Init();
+    printf("SelectImage:BlackImage\r\n");
+    Paint_SelectImage(BlackImage);
+    Paint_Clear(WHITE);
+
+    // 2.Drawing on the image
+    printf("Drawing:BlackImage\r\n");
+    Paint_DrawPoint(10, 80, BLACK, DOT_PIXEL_1X1, DOT_STYLE_DFT);
+    Paint_DrawPoint(10, 90, BLACK, DOT_PIXEL_2X2, DOT_STYLE_DFT);
+    Paint_DrawPoint(10, 100, BLACK, DOT_PIXEL_3X3, DOT_STYLE_DFT);
+    Paint_DrawLine(20, 70, 70, 120, BLACK, DOT_PIXEL_1X1, LINE_STYLE_SOLID);
+    Paint_DrawLine(70, 70, 20, 120, BLACK, DOT_PIXEL_1X1, LINE_STYLE_SOLID);
+    Paint_DrawRectangle(20, 70, 70, 120, BLACK, DOT_PIXEL_1X1, DRAW_FILL_EMPTY);
+    Paint_DrawRectangle(80, 70, 130, 120, BLACK, DOT_PIXEL_1X1, DRAW_FILL_FULL);
+    Paint_DrawCircle(45, 95, 20, BLACK, DOT_PIXEL_1X1, DRAW_FILL_EMPTY);
+    Paint_DrawCircle(105, 95, 20, WHITE, DOT_PIXEL_1X1, DRAW_FILL_FULL);
+    Paint_DrawLine(85, 95, 125, 95, BLACK, DOT_PIXEL_1X1, LINE_STYLE_DOTTED);
+    Paint_DrawLine(105, 75, 105, 115, BLACK, DOT_PIXEL_1X1, LINE_STYLE_DOTTED);
+    Paint_DrawString_EN(10, 0, "waveshare", &Font16, BLACK, WHITE);
+    Paint_DrawString_EN(10, 20, "hello world", &Font12, WHITE, BLACK);
+    Paint_DrawNum(10, 33, 123456789, &Font12, BLACK, WHITE);
+    Paint_DrawNum(10, 50, 987654321, &Font16, WHITE, BLACK);
+    Paint_DrawString_CN(130, 0, " <20><><EFBFBD><EFBFBD>abc", &Font12CN, BLACK, WHITE);
+    Paint_DrawString_CN(130, 20, "΢ѩ<EFBFBD><EFBFBD><EFBFBD><EFBFBD>", &Font24CN, WHITE, BLACK);
+
+    printf("EPD_Display\r\n");
+    EPD_7IN5_V2_Display(BlackImage);
+    DEV_Delay_ms(2000);
+#endif
+
+#if 1   //Partial refresh, example shows time
+    EPD_7IN5_V2_Init_Part();
+	Paint_NewImage(BlackImage, Font20.Width * 7, Font20.Height, 0, WHITE);
+    Debug("Partial refresh\r\n");
+    Paint_SelectImage(BlackImage);
+    Paint_Clear(WHITE);
+	
+    PAINT_TIME sPaint_time;
+    sPaint_time.Hour = 12;
+    sPaint_time.Min = 34;
+    sPaint_time.Sec = 56;
+    UBYTE num = 10;
+    for (;;) {
+        sPaint_time.Sec = sPaint_time.Sec + 1;
+        if (sPaint_time.Sec == 60) {
+            sPaint_time.Min = sPaint_time.Min + 1;
+            sPaint_time.Sec = 0;
+            if (sPaint_time.Min == 60) {
+                sPaint_time.Hour =  sPaint_time.Hour + 1;
+                sPaint_time.Min = 0;
+                if (sPaint_time.Hour == 24) {
+                    sPaint_time.Hour = 0;
+                    sPaint_time.Min = 0;
+                    sPaint_time.Sec = 0;
+                }
+            }
+        }
+        Paint_ClearWindows(0, 0, Font20.Width * 7, Font20.Height, WHITE);
+        Paint_DrawTime(0, 0, &sPaint_time, &Font20, WHITE, BLACK);
+
+        num = num - 1;
+        if(num == 0) {
+            break;
+        }
+		EPD_7IN5_V2_Display_Part(BlackImage, 150, 80, 150 + Font20.Width * 7, 80 + Font20.Height);
+        DEV_Delay_ms(500);//Analog clock 1s
+    }
+#endif
+
+/*
+    The feature will only be available on screens sold after 24/10/23
+*/
+#if 1 // show image for array
+    free(BlackImage);
+    printf("show Gray------------------------\r\n");
+    Imagesize = ((EPD_7IN5_V2_WIDTH % 4 == 0)? (EPD_7IN5_V2_WIDTH / 4 ): (EPD_7IN5_V2_WIDTH / 4 + 1)) * EPD_7IN5_V2_HEIGHT;
+    if((BlackImage = (UBYTE *)malloc(Imagesize)) == NULL) {
+        printf("Failed to apply for black memory...\r\n");
+        while (1);
+    }
+    EPD_7IN5_V2_Init_4Gray();
+    printf("4 grayscale display\r\n");
+    Paint_NewImage(BlackImage, EPD_7IN5_V2_WIDTH, EPD_7IN5_V2_HEIGHT, 0, WHITE);
+    Paint_SetScale(4);
+    Paint_Clear(0xff);
+    
+    Paint_DrawPoint(10, 80, GRAY4, DOT_PIXEL_1X1, DOT_STYLE_DFT);
+    Paint_DrawPoint(10, 90, GRAY4, DOT_PIXEL_2X2, DOT_STYLE_DFT);
+    Paint_DrawPoint(10, 100, GRAY4, DOT_PIXEL_3X3, DOT_STYLE_DFT);
+    Paint_DrawLine(20, 70, 70, 120, GRAY4, DOT_PIXEL_1X1, LINE_STYLE_SOLID);
+    Paint_DrawLine(70, 70, 20, 120, GRAY4, DOT_PIXEL_1X1, LINE_STYLE_SOLID);
+    Paint_DrawRectangle(20, 70, 70, 120, GRAY4, DOT_PIXEL_1X1, DRAW_FILL_EMPTY);
+    Paint_DrawRectangle(80, 70, 130, 120, GRAY4, DOT_PIXEL_1X1, DRAW_FILL_FULL);
+    Paint_DrawCircle(45, 95, 20, GRAY4, DOT_PIXEL_1X1, DRAW_FILL_EMPTY);
+    Paint_DrawCircle(105, 95, 20, GRAY2, DOT_PIXEL_1X1, DRAW_FILL_FULL);
+    Paint_DrawLine(85, 95, 125, 95, GRAY4, DOT_PIXEL_1X1, LINE_STYLE_DOTTED);
+    Paint_DrawLine(105, 75, 105, 115, GRAY4, DOT_PIXEL_1X1, LINE_STYLE_DOTTED);
+    Paint_DrawString_EN(10, 0, "waveshare", &Font16, GRAY4, GRAY1);
+    Paint_DrawString_EN(10, 20, "hello world", &Font12, GRAY3, GRAY1);
+    Paint_DrawNum(10, 33, 123456789, &Font12, GRAY4, GRAY2);
+    Paint_DrawNum(10, 50, 987654321, &Font16, GRAY1, GRAY4);
+    Paint_DrawString_CN(150, 0,"<EFBFBD><EFBFBD><EFBFBD><EFBFBD>abc", &Font12CN, GRAY4, GRAY1);
+    Paint_DrawString_CN(150, 20,"<EFBFBD><EFBFBD><EFBFBD><EFBFBD>abc", &Font12CN, GRAY3, GRAY2);
+    Paint_DrawString_CN(150, 40,"<EFBFBD><EFBFBD><EFBFBD><EFBFBD>abc", &Font12CN, GRAY2, GRAY3);
+    Paint_DrawString_CN(150, 60,"<EFBFBD><EFBFBD><EFBFBD><EFBFBD>abc", &Font12CN, GRAY1, GRAY4);
+    Paint_DrawString_CN(10, 130, "΢ѩ<EFBFBD><EFBFBD><EFBFBD><EFBFBD>", &Font24CN, GRAY1, GRAY4);
+    EPD_7IN5_V2_Display_4Gray(BlackImage);
+    DEV_Delay_ms(3000);
+#endif
+
+    printf("Clear...\r\n");
+    EPD_7IN5_V2_Init();
+    EPD_7IN5_V2_Clear();
+
+    printf("Goto Sleep...\r\n");
+    EPD_7IN5_V2_Sleep();
+    free(BlackImage);
+    BlackImage = NULL;
+    DEV_Delay_ms(2000);//important, at least 2s
+    // close 5V
+    printf("close 5V, Module enters 0 power consumption ...\r\n");
+    DEV_Module_Exit();
+    
+    return 0;
+}
+

Pico_ePaper_Code/c/examples/EPD_7in5_V2_test_old.c

@@ -0,0 +1,149 @@
+/*****************************************************************************
+* | File      	:   EPD_7in5_V2_test.c
+* | Author      :   Waveshare team
+* | Function    :   7.5inch e-paper test demo
+* | Info        :
+*----------------
+* |	This version:   V1.0
+* | Date        :   2023-12-18
+* | Info        :
+#
+# Permission is hereby granted, free of charge, to any person obtaining a copy
+# of this software and associated documnetation files (the "Software"), to deal
+# in the Software without restriction, including without limitation the rights
+# to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+# copies of the Software, and to permit persons to  whom the Software is
+# furished to do so, subject to the following conditions:
+#
+# The above copyright notice and this permission notice shall be included in
+# all copies or substantial portions of the Software.
+#
+# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+# FITNESS OR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+# AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+# LIABILITY WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+# OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+# THE SOFTWARE.
+#
+******************************************************************************/
+#include "EPD_Test.h"
+#include "EPD_7in5_V2_old.h"
+
+int EPD_7in5_V2_test_old(void)
+{
+    printf("EPD_7IN5_V2_test Demo\r\n");
+    if(DEV_Module_Init()!=0){
+        return -1;
+    }
+    printf("e-Paper Init and Clear...\r\n");
+    EPD_7IN5_V2_Init_old();
+    EPD_7IN5_V2_Clear_old();
+    DEV_Delay_ms(500);
+	
+    //Create a new image cache
+    UBYTE *BlackImage;
+    /* you have to edit the startup_stm32fxxx.s file and set a big enough heap size */
+    UWORD Imagesize = ((EPD_7IN5_V2_WIDTH % 8 == 0)? (EPD_7IN5_V2_WIDTH / 8 ): (EPD_7IN5_V2_WIDTH / 8 + 1)) * EPD_7IN5_V2_HEIGHT;
+    if((BlackImage = (UBYTE *)malloc(Imagesize)) == NULL) {
+        printf("Failed to apply for black memory...\r\n");
+        return -1;
+    }
+    printf("Paint_NewImage\r\n");
+    Paint_NewImage(BlackImage, EPD_7IN5_V2_WIDTH, EPD_7IN5_V2_HEIGHT, 0, WHITE);
+      
+#if 1   // show image for array   
+    printf("show image for array\r\n");
+    EPD_7IN5_V2_Init_Fast_old();
+    EPD_7IN5_V2_Display_old(gImage_7in5_V2);
+    DEV_Delay_ms(2000);
+#endif
+
+#if 1   // Drawing on the image
+    //1.Select Image
+    printf("SelectImage:BlackImage\r\n");
+    EPD_7IN5_V2_Init_old();
+    Paint_SelectImage(BlackImage);
+    Paint_Clear(WHITE);
+
+    // 2.Drawing on the image
+    printf("Drawing:BlackImage\r\n");
+    Paint_DrawPoint(10, 80, BLACK, DOT_PIXEL_1X1, DOT_STYLE_DFT);
+    Paint_DrawPoint(10, 90, BLACK, DOT_PIXEL_2X2, DOT_STYLE_DFT);
+    Paint_DrawPoint(10, 100, BLACK, DOT_PIXEL_3X3, DOT_STYLE_DFT);
+    Paint_DrawLine(20, 70, 70, 120, BLACK, DOT_PIXEL_1X1, LINE_STYLE_SOLID);
+    Paint_DrawLine(70, 70, 20, 120, BLACK, DOT_PIXEL_1X1, LINE_STYLE_SOLID);
+    Paint_DrawRectangle(20, 70, 70, 120, BLACK, DOT_PIXEL_1X1, DRAW_FILL_EMPTY);
+    Paint_DrawRectangle(80, 70, 130, 120, BLACK, DOT_PIXEL_1X1, DRAW_FILL_FULL);
+    Paint_DrawCircle(45, 95, 20, BLACK, DOT_PIXEL_1X1, DRAW_FILL_EMPTY);
+    Paint_DrawCircle(105, 95, 20, WHITE, DOT_PIXEL_1X1, DRAW_FILL_FULL);
+    Paint_DrawLine(85, 95, 125, 95, BLACK, DOT_PIXEL_1X1, LINE_STYLE_DOTTED);
+    Paint_DrawLine(105, 75, 105, 115, BLACK, DOT_PIXEL_1X1, LINE_STYLE_DOTTED);
+    Paint_DrawString_EN(10, 0, "waveshare", &Font16, BLACK, WHITE);
+    Paint_DrawString_EN(10, 20, "hello world", &Font12, WHITE, BLACK);
+    Paint_DrawNum(10, 33, 123456789, &Font12, BLACK, WHITE);
+    Paint_DrawNum(10, 50, 987654321, &Font16, WHITE, BLACK);
+    Paint_DrawString_CN(130, 0, "<EFBFBD><EFBFBD><EFBFBD><EFBFBD>abc", &Font12CN, BLACK, WHITE);
+    Paint_DrawString_CN(130, 20, "΢ѩ<EFBFBD><EFBFBD><EFBFBD><EFBFBD>", &Font24CN, WHITE, BLACK);
+
+    printf("EPD_Display\r\n");
+    EPD_7IN5_V2_Display_old(BlackImage);
+    DEV_Delay_ms(2000);
+#endif
+
+#if 1   //Partial refresh, example shows time
+    EPD_7IN5_V2_Init_Partial_old();
+	Paint_NewImage(BlackImage, Font20.Width * 7, Font20.Height, 0, WHITE);
+    printf("Partial refresh\r\n");
+    Paint_SelectImage(BlackImage);
+    Paint_Clear(WHITE);
+	
+    PAINT_TIME sPaint_time;
+    sPaint_time.Hour = 12;
+    sPaint_time.Min = 34;
+    sPaint_time.Sec = 56;
+    UBYTE num = 10;
+    for (;;) {
+        sPaint_time.Sec = sPaint_time.Sec + 1;
+        if (sPaint_time.Sec == 60) {
+            sPaint_time.Min = sPaint_time.Min + 1;
+            sPaint_time.Sec = 0;
+            if (sPaint_time.Min == 60) {
+                sPaint_time.Hour =  sPaint_time.Hour + 1;
+                sPaint_time.Min = 0;
+                if (sPaint_time.Hour == 24) {
+                    sPaint_time.Hour = 0;
+                    sPaint_time.Min = 0;
+                    sPaint_time.Sec = 0;
+                }
+            }
+        }
+        Paint_ClearWindows(0, 0, Font20.Width * 7, Font20.Height, WHITE);
+        Paint_DrawTime(0, 0, &sPaint_time, &Font20, WHITE, BLACK);
+
+        num = num - 1;
+        if(num == 0) {
+            break;
+        }
+		EPD_7IN5_V2_Display_Partial_old(BlackImage, 150, 80, 150 + Font20.Width * 7, 80 + Font20.Height);
+        DEV_Delay_ms(500);//Analog clock 1s
+
+    }
+#endif
+
+    printf("Clear...\r\n");
+    EPD_7IN5_V2_Init_old();
+    EPD_7IN5_V2_Clear_old();
+
+    printf("Goto Sleep...\r\n");
+    EPD_7IN5_V2_Sleep_old();
+    free(BlackImage);
+    BlackImage = NULL;
+    DEV_Delay_ms(2000);//important, at least 2s
+    // close 5V
+    printf("close 5V, Module enters 0 power consumption ...\r\n");
+    DEV_Module_Exit();
+    
+    return 0;
+}
+

Pico_ePaper_Code/c/examples/EPD_7in5b_V2_test.c

@@ -0,0 +1,163 @@
+/*****************************************************************************
+* | File      	:   EPD_7in5b_V2_test.c
+* | Author      :   Waveshare team
+* | Function    :   7.5inch B e-paper test demo
+* | Info        :
+*----------------
+* |	This version:   V1.0
+* | Date        :   2020-11-30
+* | Info        :
+#
+# Permission is hereby granted, free of charge, to any person obtaining a copy
+# of this software and associated documnetation files (the "Software"), to deal
+# in the Software without restriction, including without limitation the rights
+# to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+# copies of the Software, and to permit persons to  whom the Software is
+# furished to do so, subject to the following conditions:
+#
+# The above copyright notice and this permission notice shall be included in
+# all copies or substantial portions of the Software.
+#
+# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+# FITNESS OR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+# AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+# LIABILITY WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+# OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+# THE SOFTWARE.
+#
+******************************************************************************/
+#include "EPD_Test.h"
+#include "EPD_7in5b_V2.h"
+
+int EPD_7in5b_V2_test(void)
+{
+    printf("EPD_7IN5B_V2_test Demo\r\n");
+    if(DEV_Module_Init()!=0){
+        return -1;
+    }
+
+    printf("e-Paper Init and Clear...\r\n");
+    EPD_7IN5B_V2_Init();
+	
+    EPD_7IN5B_V2_Clear();
+    DEV_Delay_ms(500);
+	
+    //Create a new image cache named IMAGE_BW and fill it with white
+    UBYTE *BlackImage, *RYImage;
+    UWORD Imagesize = ((EPD_7IN5B_V2_WIDTH % 8 == 0)? (EPD_7IN5B_V2_WIDTH / 8 ): (EPD_7IN5B_V2_WIDTH / 8 + 1)) * EPD_7IN5B_V2_HEIGHT;
+    if((BlackImage = (UBYTE *)malloc(Imagesize)) == NULL) {
+        printf("Failed to apply for black memory...\r\n");
+        return -1;
+    }
+    if((RYImage = (UBYTE *)malloc(Imagesize)) == NULL) {
+        printf("Failed to apply for red memory...\r\n");
+        return -1;
+    }
+    printf("NewImage:BlackImage and RYImage\r\n");
+    Paint_NewImage(BlackImage, EPD_7IN5B_V2_WIDTH, EPD_7IN5B_V2_HEIGHT , 0, WHITE);
+    Paint_NewImage(RYImage, EPD_7IN5B_V2_WIDTH, EPD_7IN5B_V2_HEIGHT , 0, WHITE);
+
+    //Select Image
+    Paint_SelectImage(BlackImage);
+    Paint_Clear(WHITE);
+    Paint_SelectImage(RYImage);
+    Paint_Clear(WHITE);
+    
+#if 1   // show image for array    
+    printf("show image for array\r\n");
+    EPD_7IN5B_V2_Display(gImage_7in5_V2_b, gImage_7in5_V2_ry);
+    DEV_Delay_ms(2000);
+#endif
+
+#if 1   // Drawing on the image
+    /*Horizontal screen*/
+    //1.Draw black image
+    Paint_SelectImage(BlackImage);
+    Paint_Clear(WHITE);
+    Paint_DrawPoint(10, 80, BLACK, DOT_PIXEL_1X1, DOT_STYLE_DFT);
+    Paint_DrawPoint(10, 90, BLACK, DOT_PIXEL_2X2, DOT_STYLE_DFT);
+    Paint_DrawPoint(10, 100, BLACK, DOT_PIXEL_3X3, DOT_STYLE_DFT);
+    Paint_DrawPoint(10, 110, BLACK, DOT_PIXEL_3X3, DOT_STYLE_DFT);
+    Paint_DrawLine(20, 70, 70, 120, BLACK, DOT_PIXEL_1X1, LINE_STYLE_SOLID);
+    Paint_DrawLine(70, 70, 20, 120, BLACK, DOT_PIXEL_1X1, LINE_STYLE_SOLID);      
+    Paint_DrawRectangle(20, 70, 70, 120, BLACK, DOT_PIXEL_1X1, DRAW_FILL_EMPTY);
+    Paint_DrawRectangle(80, 70, 130, 120, BLACK, DOT_PIXEL_1X1, DRAW_FILL_FULL);
+    Paint_DrawString_EN(10, 0, "waveshare", &Font16, BLACK, WHITE);    
+    Paint_DrawString_CN(130, 20, "微雪电子", &Font24CN, WHITE, BLACK);
+    Paint_DrawNum(10, 50, 987654321, &Font16, WHITE, BLACK);
+    
+    //2.Draw red image
+    Paint_SelectImage(RYImage);
+    Paint_Clear(WHITE);
+    Paint_DrawCircle(160, 95, 20, BLACK, DOT_PIXEL_1X1, DRAW_FILL_EMPTY);
+    Paint_DrawCircle(210, 95, 20, BLACK, DOT_PIXEL_1X1, DRAW_FILL_FULL);
+    Paint_DrawLine(85, 95, 125, 95, BLACK, DOT_PIXEL_1X1, LINE_STYLE_DOTTED);
+    Paint_DrawLine(105, 75, 105, 115, BLACK, DOT_PIXEL_1X1, LINE_STYLE_DOTTED);  
+    Paint_DrawString_CN(130, 0,"你好Abc", &Font12CN, BLACK, WHITE);
+    Paint_DrawString_EN(10, 20, "hello world", &Font12, WHITE, BLACK);
+    Paint_DrawNum(10, 33, 123456789, &Font12, BLACK, WHITE);
+    
+    printf("EPD_Display\r\n");
+    EPD_7IN5B_V2_Display(BlackImage, RYImage);
+    DEV_Delay_ms(2000);
+#endif
+
+#if 1   //Partial refresh, example shows time
+    EPD_7IN5B_V2_Init_Part();
+    EPD_7IN5B_V2_Display_Base_color(WHITE);
+	Paint_NewImage(BlackImage, Font20.Width * 7, Font20.Height, 0, WHITE);
+    Debug("Partial refresh\r\n");
+    Paint_SelectImage(BlackImage);
+    Paint_Clear(WHITE);
+	
+    PAINT_TIME sPaint_time;
+    sPaint_time.Hour = 12;
+    sPaint_time.Min = 34;
+    sPaint_time.Sec = 56;
+    UBYTE num = 10;
+    for (;;) {
+        sPaint_time.Sec = sPaint_time.Sec + 1;
+        if (sPaint_time.Sec == 60) {
+            sPaint_time.Min = sPaint_time.Min + 1;
+            sPaint_time.Sec = 0;
+            if (sPaint_time.Min == 60) {
+                sPaint_time.Hour =  sPaint_time.Hour + 1;
+                sPaint_time.Min = 0;
+                if (sPaint_time.Hour == 24) {
+                    sPaint_time.Hour = 0;
+                    sPaint_time.Min = 0;
+                    sPaint_time.Sec = 0;
+                }
+            }
+        }
+        Paint_ClearWindows(0, 0, Font20.Width * 7, Font20.Height, WHITE);
+        Paint_DrawTime(0, 0, &sPaint_time, &Font20, WHITE, BLACK);
+
+        num = num - 1;
+        if(num == 0) {
+            break;
+        }
+		EPD_7IN5B_V2_Display_Partial(BlackImage, 10, 130, 10 + Font20.Width * 7, 130 + Font20.Height);
+        DEV_Delay_ms(500);//Analog clock 1s
+    }
+#endif
+
+    printf("Clear...\r\n");
+    EPD_7IN5B_V2_Init();
+    EPD_7IN5B_V2_Clear();
+
+    printf("Goto Sleep...\r\n");
+    EPD_7IN5B_V2_Sleep();
+    free(BlackImage);
+    free(RYImage);
+    BlackImage = NULL;
+    RYImage = NULL;
+    DEV_Delay_ms(2000);//important, at least 2s
+    // close 5V
+    printf("close 5V, Module enters 0 power consumption ...\r\n");
+    DEV_Module_Exit();
+    
+    return 0;
+}
+

Pico_ePaper_Code/c/examples/EPD_7in5b_V2_test_old.c

@@ -0,0 +1,121 @@
+/*****************************************************************************
+* | File      	:   EPD_7in5b_V2_test.c
+* | Author      :   Waveshare team
+* | Function    :   5.83inch B&C e-paper test demo
+* | Info        :
+*----------------
+* |	This version:   V1.0
+* | Date        :   2020-11-30
+* | Info        :
+#
+# Permission is hereby granted, free of charge, to any person obtaining a copy
+# of this software and associated documnetation files (the "Software"), to deal
+# in the Software without restriction, including without limitation the rights
+# to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+# copies of the Software, and to permit persons to  whom the Software is
+# furished to do so, subject to the following conditions:
+#
+# The above copyright notice and this permission notice shall be included in
+# all copies or substantial portions of the Software.
+#
+# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+# FITNESS OR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+# AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+# LIABILITY WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+# OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+# THE SOFTWARE.
+#
+******************************************************************************/
+#include "EPD_Test.h"
+#include "EPD_7in5b_V2_old.h"
+
+int EPD_7in5b_V2_test_old(void)
+{
+    printf("EPD_7IN5B_V2_test Demo\r\n");
+    if(DEV_Module_Init()!=0){
+        return -1;
+    }
+
+    printf("e-Paper Init and Clear...\r\n");
+    EPD_7IN5B_V2_Init_old();
+    EPD_7IN5B_V2_Clear_old();
+    DEV_Delay_ms(500);
+	
+    //Create a new image cache named IMAGE_BW and fill it with white
+    UBYTE *BlackImage, *RYImage;
+    UWORD Imagesize = ((EPD_7IN5B_V2_WIDTH % 8 == 0)? (EPD_7IN5B_V2_WIDTH / 8 ): (EPD_7IN5B_V2_WIDTH / 8 + 1)) * EPD_7IN5B_V2_HEIGHT;
+    if((BlackImage = (UBYTE *)malloc(Imagesize)) == NULL) {
+        printf("Failed to apply for black memory...\r\n");
+        return -1;
+    }
+    if((RYImage = (UBYTE *)malloc(Imagesize)) == NULL) {
+        printf("Failed to apply for red memory...\r\n");
+        return -1;
+    }
+    printf("NewImage:BlackImage and RYImage\r\n");
+    Paint_NewImage(BlackImage, EPD_7IN5B_V2_WIDTH, EPD_7IN5B_V2_HEIGHT , 0, WHITE);
+    Paint_NewImage(RYImage, EPD_7IN5B_V2_WIDTH, EPD_7IN5B_V2_HEIGHT , 0, WHITE);
+
+    //Select Image
+    Paint_SelectImage(BlackImage);
+    Paint_Clear(WHITE);
+    Paint_SelectImage(RYImage);
+    Paint_Clear(WHITE);  
+    
+#if 1   // show image for array    
+    printf("show image for array\r\n");
+    EPD_7IN5B_V2_Display_old(gImage_7in5_V2_b, gImage_7in5_V2_ry);
+    DEV_Delay_ms(2000);
+#endif
+
+#if 1   // Drawing on the image
+    /*Horizontal screen*/
+    //1.Draw black image
+    Paint_SelectImage(BlackImage);
+    Paint_Clear(WHITE);
+    Paint_DrawPoint(10, 80, BLACK, DOT_PIXEL_1X1, DOT_STYLE_DFT);
+    Paint_DrawPoint(10, 90, BLACK, DOT_PIXEL_2X2, DOT_STYLE_DFT);
+    Paint_DrawPoint(10, 100, BLACK, DOT_PIXEL_3X3, DOT_STYLE_DFT);
+    Paint_DrawPoint(10, 110, BLACK, DOT_PIXEL_3X3, DOT_STYLE_DFT);
+    Paint_DrawLine(20, 70, 70, 120, BLACK, DOT_PIXEL_1X1, LINE_STYLE_SOLID);
+    Paint_DrawLine(70, 70, 20, 120, BLACK, DOT_PIXEL_1X1, LINE_STYLE_SOLID);      
+    Paint_DrawRectangle(20, 70, 70, 120, BLACK, DOT_PIXEL_1X1, DRAW_FILL_EMPTY);
+    Paint_DrawRectangle(80, 70, 130, 120, BLACK, DOT_PIXEL_1X1, DRAW_FILL_FULL);
+    Paint_DrawString_EN(10, 0, "waveshare", &Font16, BLACK, WHITE);    
+    Paint_DrawString_CN(130, 20, "΢ѩ<EFBFBD><EFBFBD><EFBFBD><EFBFBD>", &Font24CN, WHITE, BLACK);
+    Paint_DrawNum(10, 50, 987654321, &Font16, WHITE, BLACK);
+    
+    //2.Draw red image
+    Paint_SelectImage(RYImage);
+    Paint_Clear(WHITE);
+    Paint_DrawCircle(160, 95, 20, BLACK, DOT_PIXEL_1X1, DRAW_FILL_EMPTY);
+    Paint_DrawCircle(210, 95, 20, BLACK, DOT_PIXEL_1X1, DRAW_FILL_FULL);
+    Paint_DrawLine(85, 95, 125, 95, BLACK, DOT_PIXEL_1X1, LINE_STYLE_DOTTED);
+    Paint_DrawLine(105, 75, 105, 115, BLACK, DOT_PIXEL_1X1, LINE_STYLE_DOTTED);  
+    Paint_DrawString_CN(130, 0,"<EFBFBD><EFBFBD><EFBFBD><EFBFBD>abc", &Font12CN, BLACK, WHITE);
+    Paint_DrawString_EN(10, 20, "hello world", &Font12, WHITE, BLACK);
+    Paint_DrawNum(10, 33, 123456789, &Font12, BLACK, WHITE);
+    
+    printf("EPD_Display\r\n");
+    EPD_7IN5B_V2_Display_old(BlackImage, RYImage);
+    DEV_Delay_ms(2000);
+#endif
+
+    printf("Clear...\r\n");
+    EPD_7IN5B_V2_Clear_old();
+
+    printf("Goto Sleep...\r\n");
+    EPD_7IN5B_V2_Sleep_old();
+    free(BlackImage);
+    free(RYImage);
+    BlackImage = NULL;
+    RYImage = NULL;
+    DEV_Delay_ms(2000);//important, at least 2s
+    // close 5V
+    printf("close 5V, Module enters 0 power consumption ...\r\n");
+    DEV_Module_Exit();
+    
+    return 0;
+}
+

Pico_ePaper_Code/c/examples/EPD_Test.h

@@ -0,0 +1,76 @@
+/*****************************************************************************
+* | File      	:	  EPD_Test.h
+* | Author      :   Waveshare team
+* | Function    :   e-Paper test Demo
+* | Info        :
+*----------------
+* |	This version:   V1.0
+* | Date        :   2019-06-11
+* | Info        :   
+#
+# Permission is hereby granted, free of charge, to any person obtaining a copy
+# of this software and associated documnetation files (the "Software"), to deal
+# in the Software without restriction, including without limitation the rights
+# to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+# copies of the Software, and to permit persons to  whom the Software is
+# furished to do so, subject to the following conditions:
+#
+# The above copyright notice and this permission notice shall be included in
+# all copies or substantial portions of the Software.
+#
+# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+# FITNESS OR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+# AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+# LIABILITY WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+# OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+# THE SOFTWARE.
+#
+******************************************************************************/
+#ifndef _EPD_TEST_H_
+#define _EPD_TEST_H_
+
+#include "DEV_Config.h"
+#include "GUI_Paint.h"
+#include "ImageData.h"
+#include "Debug.h"
+#include <stdlib.h> // malloc() free()
+
+int EPD_2in9_V2_test(void);
+int EPD_2in9bc_test(void);
+int EPD_2in9b_V3_test(void);
+int EPD_2in9b_V4_test(void);
+int EPD_2in9d_test(void);
+
+int EPD_2in13_V2_test(void);
+int EPD_2in13_V3_test(void);
+int EPD_2in13_V4_test(void);
+int EPD_2in13bc_test(void);
+int EPD_2in13b_V3_test(void);
+int EPD_2in13b_V4_test(void);
+int EPD_2in13d_test(void);
+
+int EPD_2in66_test(void);
+int EPD_2in66b_test(void);
+
+int EPD_2in7_test(void);
+int EPD_2in7_V2_test(void);
+
+int EPD_3in7_test(void);
+
+int EPD_4in2_test(void);
+int EPD_4in2_V2_test(void);
+int EPD_4in2b_V2_test(void);
+int EPD_4in2b_V2_test_old(void);
+
+int EPD_5in65f_test(void);
+
+int EPD_5in83_V2_test(void);
+int EPD_5in83b_V2_test(void);
+
+int EPD_7in5_V2_test(void);
+int EPD_7in5_V2_test_old(void);
+int EPD_7in5b_V2_test(void);
+int EPD_7in5b_V2_test_old(void);
+
+#endif

Pico_ePaper_Code/c/examples/ImageData.h

@@ -0,0 +1,83 @@
+/*****************************************************************************
+* | File      	:   ImageData.h
+* | Author      :   Waveshare team
+* | Function    :	
+*----------------
+* |	This version:   V1.0
+* | Date        :   2018-10-23
+* | Info        :
+*
+#
+# Permission is hereby granted, free of charge, to any person obtaining a copy
+# of this software and associated documnetation files (the "Software"), to deal
+# in the Software without restriction, including without limitation the rights
+# to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+# copies of the Software, and to permit persons to  whom the Software is
+# furished to do so, subject to the following conditions:
+#
+# The above copyright notice and this permission notice shall be included in
+# all copies or substantial portions of the Software.
+#
+# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+# FITNESS OR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+# AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+# LIABILITY WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+# OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+# THE SOFTWARE.
+#
+
+******************************************************************************/
+
+#ifndef _IMAGEDATA_H_
+#define _IMAGEDATA_H_
+
+extern const unsigned char flagimage[];
+
+extern const unsigned char gImage_2in13_2[];
+extern const unsigned char gImage_2in9[];
+extern const unsigned char gImage_2in9_4gray[];
+extern const unsigned char gImage_2in9bc_b[];
+extern const unsigned char gImage_2in9bc_ry[];
+
+extern const unsigned char gImage_2in13[];
+extern const unsigned char gImage_2in13b_V4b[];
+extern const unsigned char gImage_2in13b_V4r[];
+extern const unsigned char gImage_2in13b_b[];
+extern const unsigned char gImage_2in13b_r[];
+extern const unsigned char gImage_2in13c_b[];
+extern const unsigned char gImage_2in13c_y[];
+extern const unsigned char gImage_2in13d[];
+
+extern const unsigned char gImage_2in66[];
+extern const unsigned char gImage_2in66br[];
+extern const unsigned char gImage_2in66bb[];
+
+extern const unsigned char gImage_2in7[];
+extern const unsigned char gImage_2in7b_Black[5808];
+extern const unsigned char gImage_2in7b_Red[5808];
+extern const unsigned char gImage_2in7b_Black_V2[5808];
+extern const unsigned char gImage_2in7b_Red_V2[5808];
+extern const unsigned char gImage_2in7_4Gray[];
+extern const unsigned char gImage_2in7_4Gray_1[];
+
+extern const unsigned char gImage_4in2[];
+extern const unsigned char gImage_4in2_4Gray[];
+extern const unsigned char gImage_4in2_4Gray1[];
+extern const unsigned char gImage_4in2bc_b[];
+extern const unsigned char gImage_4in2bc_ry[];
+
+extern const unsigned char gImage_5in65f[];
+
+extern const unsigned char gImage_5in83_V2[];
+extern const unsigned char gImage_5in83b_V2_b[];
+extern const unsigned char gImage_5in83b_V2_r[];
+
+extern const unsigned char gImage_7in5_V2[];
+extern const unsigned char gImage_7in5_V2_b[];
+extern const unsigned char gImage_7in5_V2_ry[];
+
+#endif
+/* FILE END */
+
+

Pico_ePaper_Code/c/extra_uf2/Readme.txt

@@ -0,0 +1,6 @@
+English:
+This directory holds our pre-compiled sample programs. 
+You can use them for evaluation if you have trouble setting up your environment.
+
+中文：
+本目录存放的是我们预先编译好的示例程序。如果您在环境搭建时遇到了麻烦，可以使用它们进行评估。

Pico_ePaper_Code/c/extra_uf2/pico/Readme.txt

@@ -0,0 +1,6 @@
+English:
+This directory holds our pre-compiled sample programs. 
+You can use them for evaluation if you have trouble setting up your environment.
+
+中文：
+本目录存放的是我们预先编译好的示例程序。如果您在环境搭建时遇到了麻烦，可以使用它们进行评估。