# ESP-SDR — potential electronics project Date captured: 2026-10-01 Status: Idea / reference to explore; no adoption, build, or hardware test yet. Tags: #electronics #esp32 #sdr #radio #project-idea ## Source - Repository: https://github.com/ESPARGOS/esp-sdr (user-shared URL, without tracking parameters) - Project overview: https://espargos.net/espsdr/ ## Why it may be interesting ESPARGOS documents an undocumented raw I/Q receive path in several ESP32-family Wi-Fi radios. The firmware turns a supported ESP32 into a low-cost, receive-only SDR for studying the 2.4 GHz band; the ESP32-C5 also supports 5 GHz reception. It sends short raw I/Q captures over USB/UART, and some chips offer on-device FFT/spectrum streaming. This could be explored as a radio-learning or 2.4 GHz spectrum-visualization project using a *spare* board, separate from household production devices. ## Constraints to validate before a pilot - Receive-only firmware, not an RF transmitter; captures can have gaps and nominal sample rates exceed sustained serial throughput. Even continuous FFT mode analyzes selected windows, not every sample. - The documented wider 100–6000 MHz tuning attempts are *not* hardware-validated reception across that range. Gain and power are uncalibrated. - Supported chips listed in the README include ESP32, C3, C5, C6, C61, S2, S3, S31; support, rates, transports, and SDK pins vary by chip. Check the current `firmware-targets.json` and board identity before any build/flash. - Repository says parts of firmware are AI-generated. GPL-3.0-or-later applies to the firmware; review license obligations before redistribution/integration. - Do not reflash an in-use Tactility, voice, display, or home-automation board for an exploratory test. Choose a verified spare board and obtain explicit authorization before flashing. ## Next exploration 1. Pick an available spare supported board and a safe USB/UART host setup. 2. Read `docs/spectrum.md`, `docs/rx-controls.md`, target-specific code and build configuration; assess what can be visualized on the Mac mini without a new always-on service. 3. If authorized, build the appropriate pinned ESP-IDF target, run host tests, capture a known 2.4 GHz signal, and compare browser viewer output to a reference instrument or known source. Clearly label observations versus project claims. Source verification: live GitHub repository README/API inspected 2026-10-01; no clone, tests, firmware build, or physical verification performed.